UCCX HA server install

HI all
I wanted to know what would be the steps involved in installing a HA server for UCCX? We had a consultant come out to do our upgrades of our other UC products and the server was delayed and the consultant was moved to another project last week. This was the last piece that he was waiting for but it never came. And now I have confirmation that it will be here next week. I've spoken to the consultant and he says that the install isn't hard to get it up and running. I just want to know is there something that I can follow step by step to get this done with no trouble.Thanks in advance for the help and have a great day.

First thing to do is aquire your HA license, and upload it to your UCCX server.
Then build the 2nd server with the install media, remembering to selecting NO when it asks you if it's the first node in the cluster. (Covered in pg4 of the doc below).
Then once the server is built, you'll need to configure it, following the instructions on pg 73. This involves adding the second server on the first node, then you can log in to the second server's appadmin pages and complete the setup there.
Assuming you're on v8.5 , check out the following installation guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/installation/guide/uccx851ig.pdf

Similar Messages

What I wish I'd Known Before My Lion Server Install

The truth is that I am on my FIFTH Lion Server install on the same box this week. While I was working on #4, I went ahead and submitted a ticket with Apple and arranged a timeslot for this morning to work with them to help me past my struggles with Lion Server. This post is the result of that experience. Big props to Apple support techs Chuck and Don - you know who you are!
What I Wish I'd Known Before My Lion Server Install
1. Do NOT migrate user accounts, apps, and files, until AFTER you have the Server set up and working correctly.
- This one tip, which is brilliantly simple, would have saved me four very long days of head bashing.
2. Server Admin Tools are mandatory.
- The first time around I used the Server App to configure the system (after an upgrade install, and subsequently after a clean install + migration).
- Server Admin allows you to set up the foundation of your server - which it NEEDS!
- DNS - configure a local, pseudo domain for your server if you're doing this at home. Something like "mynet.private" - if you don't, your SSL certificates can get all jacked up, your clients will not trust your certs. This breaks a lot of stuff.
3. Do NOT accept the mDNS .local domain suffix for your Server
- At each step, if something auto-fills your server name as name.local reject it, and use the fully qualified domain name that you set up above (server.mynet.private).
- If you do not do this, anything that requires certificates could/will have big problems.
4. Enable services one at a time. Reboot after EACH major phase past the core Lion install.
- Base install ... Server install. REBOOT
- DNS configuration. REBOOT
- validate your host name - I needed to force a 'changeip' command because there was a problem with the HOSTNAME retaining the mdns .local domain name.
- OD Master config. REBOOT
- Set up Podcast Producer (which will also setup your Xgrid). REBOOT
5. Take images of your hard drive as you go.
- Once I got the core server installed, the basic services above, I rebooted and held the option key, then restarted on the Recovery HD image.
- Use Disk Utility to take a snapshot image of your hard disk so you can get back to this wonderful place of everything working! It's cheap insurance, and adds a bit of extra time, but is well worth it. If you leave the default settings alone (the 'compressed' one in particular) it will use as little space as possible. My server at this stage of configuration created a 4GB disk image.
6. Use the Migration Assistant After the above
- Now you can migrate your apps
- Migrate your users
- etc.
If you use the Migration option while you're installing the server, or if you upgrade on top of your Snow Leopard (or whatever), I can almost guarantee you that you are in for a world of hurt.
I struggled through all kinds of issues with files having embedded information, scattered throughout all the various subsystems, that gummed up my installation and would case all manner of the flakey Lion Server behavior that you read about ("Error Reading Configuration").
If you want to use Podcast Producer, or any of the Profile Manager features, the above methodology was the only way that I could get them to work. Often times I'd have everything working, then reboot and it would break. After I did the above, the system is as solid as a rock.
Today, I love Lion Server. Yesterday I was cursing it.
Best of luck!!

There are 2 distinct apps in Lion Server.... Podcast (in Server app) and Podcast Producer (Server admin which is deemed legacy from SNS). Podcast uses Podcast Publisher instead of Podcast Capture to produce, edit and submit to Podcast app. Podcast doesn't requre Xgrid where PCP did. The two don't mix.
It's as clear as mud in all the documentation about this.
We're finding that Podcast Publisher has much more flexibility that Podcast Capture (edit, episodes & more), can use existing workflow from PCP, doesn't require xgrid, and podcasts can easily be managed by non-IT people via the Podcast wiki as opposed to the CLI pcast commands to edit & modify PCP feeds.
Hope this helps.

How to set system time from Terminal while booted from 10.6.3 server install disk?

I'm installing from a 10.6.3 server install disc onto a Mac Mini. However, the battery on this Mac Mini is pretty much dead, forcing the system time back to 1/1/2001. Through some research, this has created a problem in that I cannot move beyond the Welcome screen during setup of OS X server. It looks like the binary has issues with the system time being older.
But I'm stuck in that I don't know how to adjust the system time from the Terminal Utility on the boot CD. Can anyone help?

Hey, i just run in to something similar, tonight while trying to fix a computer.
The user set the time and date on his computer to 1998 and computer locked everything including time and date in system preferences, and his user account basicly making him from administrator to guest. he could not almost any program properly that required administrator privilages.
to fix this we used this comand in terminal " sudo date 201703162014 " todays time and date
20:17 03/16 2014
we tryed everything and this fixed in 2 seconds
ps: when you type sudo in terminal it whil give you a warning the improper use of this command is bad.... click continue.otherwhise you will not be able to execute the command.
thanks again for this post and have a great day

SCSM Management Server install error

Hi All
I have a curious error with regards to an SCSM 2012 R2 Management Server install to a Windows Server 2012 with local SQL Server 2012 Standard); the SCSM 2012 R2 Data warehouse Server installed fine on a separate server. I've checked that the install
account has full SQL, Local and Domain Admins (for install), I've also fired the install from an elevated command prompt but with same error, I've also checked that PowerShell is set to Unrestricted. There is also mention of a Timeout in the below error,
which has lead me to think it could possibly be SQL SPN issue, however please see below and let me know if anyone has seen this before \ any suggestions welcome!
The error I'm seeing in the MSI log is as follows:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions
PreRegisterExtensions: Begin
PreRegisterExtensions: Starting in deferred mode
PreRegisterExtensions: 20 extension records decoded
PreRegisterExtensions: Connecting via InProc SDK
PreRegisterExtensions: Loading management pack C:\Program Files\Microsoft System Center 2012 R2\Service Manager\System.Library.mp
PreRegisterExtensions: Importing management pack C:\Program Files\Microsoft System Center 2012 R2\Service Manager\System.Library.mp
PreRegisterExtensions: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
PreRegisterExtensions: Parameter name: managementPack ---> : Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
PreRegisterExtensions: The statement has been terminated.
PreRegisterExtensions:
PreRegisterExtensions:    --- End of inner exception stack trace ---
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.TryImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions(Session session)
PreRegisterExtensions: End (fail)
MSI (s) (D8:E4) [13:20:43:793]: NOTE: custom action _PreRegisterExtensionsDeferred unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _PreRegisterExtensionsDeferred returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
04/02/2014 13:20:43.824 [3032]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
04/02/2014 13:20:43.878 [3032]: Detailed info about C:\Windows\assembly\tmp\CPSNRJPD\Microsoft.EnterpriseManagement.OperationsManager.Apm.StatisticCounters.ScriptingLibrary.dll
04/02/2014 13:20:43.878 [3032]: File attributes: 00000080
04/02/2014 13:20:44.124 [3032]: Restart Manager Info: 1 entries
04/02/2014 13:20:44.125 [3032]:   App[0]: (3032) Windows Installer (msiserver), type = 3
Kind Regards
Andrew

Thanks Thomas
Yep had checked permissions, see below. Any others that I may have over looked that you can think of?
1. Login \ install account as local Admin on the Server
2. Login \ install account has full SQL SysAdmin rights, was also used for installing the SQL Instance locally
3. Checked account in AD so that it is ok for Kerberos Delegation
One thing is that I have specified this account for all account options during install (since its a test environment), in production would usually create distinct accounts, is this likely to be an issue though?
Will attempt install again but use Local System etc instead of specifying my domain account just to check \ see if error changes.
Kind Regards
Andrew

Mac mini server install DVD - install on a different computer

I bought a Mac mini server (= a Mac mini with a Mac OS X Snow Leopard Server pre-installed) a while ago. I am planning to install Lion Server on the same Mac Mini and get rid of the Snow Leopard installation DVD. My question is, can the DVD that came with the Mac mini be used to install the server OS on a different computer (another Mac mini or iMac etc.)? or is it somehow tied to the original Mac mini?
Thanks!

Install discs included with a Mac are only able to install on the same model Mac. However historically Mac OS X Server install discs are not limited in the same way. (Remember there is no such thing as a Lion install disc.)
The server install disc is more typically limited in being an older version of Mac OS X e.g. 10.6.3 and thus not able to boot and install on the latest model Macs. It is however possible to boot and install on an older Mac e.g. an older Mac mini but install on to an external hard disk which might even be the internal hard disk of another Mac connected via FireWire Target Disk Mode. You can then run the Mac OS X 10.6.8 Server Combo update to update it to the latest Snow Leopard Server version which will then boot successfully on all the current Macs including those that have only ever shipped with Lion.
Since a DVD disk takes very little space I would suggest you don't throw it away.

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed?

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed? We have around 300 clients that need to be enroled on the Mac server. I want to know what is the recommended amount of clients a Mac server should contain. Also what are some recommended specs to make sure the server will flawlessly?

Hello cpreasbeck,
Thank you for contacting Apple Support Communities.
I was able to find the following transition guide for Xserve that provides some workload guidance to determine performance when planning a server deployment.
Transition Guide Xserve
http://images.apple.com/xserve/pdf/L422277A_Xserve_Guide.pdf
On page 9, Performance there is a chart that provides maximum numbers of connected users for various activities such as file sharing, mail, web, calendar, directory services and Time Machine and the CPU used as a server (Xserve, Mac Pro, Mac Mini). This information is a bit dated as the referenced software is Snow Leopard Server (OS X 10.6), and the hardware is older also, but it should give you a general idea of what you might need to look for.
Regards,
Jeff D.

Can't see volumes with Mac os x server install

I'm having a problem installing MAC OS X Server on a RAIDed MAC PRO (3 drives @ RAID 5: Here are the steps that I have done so far with no luck: created a RAID level 5 with RAID utility from CLIENT OS install cd that came with mac pro. Created one giant volume with the entire contents of disk space on the RAID with the CLIENT OS install cd/RAID utility also. Rebooted, the MAC PRO, ejected the CLIENT OS cd, inserted MAC OS X server install CD. When I get to the screen where I choose my volume to install the OS on, I can't see any volumes. I was told by Apple and CDW (reseller) to go to disk utility and do an ERASE on the volumes, that should format the drive and should be seen by the OS X Server install. It didn't work. It's interesting that I can install the normal client OS after creating my RAID, Volumes, etc... But the OS X Server install DVD doesn't see the volumes during the install process, OR using disk utility from the OSX server install disk, but disk utility on the MAC OS X client CD sees it fine. Any help would be greatly appreciated.
Thanks,
Eric

Does Apple support their RAID card in Mac Pro using Server? or does Server need to be updated? Minimum requirements for Mac Pro RAID card is 10.4.10.
You could try the cheat method: install everything on a single drive and clone it and see if it works.
From a discussion yesterday or Monday, only Apple drivers are supported on the Mac Pro (firmware?) and not 3rd party retail drives (a bummer) so you've got nearly $2000.

How to monitor MySQL Server installed in Windows Server using Nagios

You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community

Content server install doc

Hi,
I am looking for content, cache server install document with install screnshots.
Thanks in advance.
Anirudh,
[email protected]

Oracle got back to me to let me know that the code is not valid on post-7.5 CS instances (I'm on 10.1.3.5). Case closed.

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Can we configure SAP server installed in RHEL in windows sapmmc?

Can we configure SAP server installed in RHEL in windows sapmmc(Which is also sap server with same version and same DB)?
I have tried to configure using help from previous post in SCN ( SAP MMC in one server to control the entrie landscape ) but it is not working... As picture shown below after entering the details am clicking on add but nothing is happening...
Scenario is I have installed 4 VM's with SAP installed in all (out of it 3 linux and 1 windows) & all communicating well and they are in same Network/Landscape & I can configure/manage/logon all servers in host GUI... But If I shutdown my VM or a Laptop... Every time I have to start all the servers... by starting lsnrctl, DB, sap for all the servers,
Is there any chance to configure sap in windows sapmmc...???
Kindly suggest the process step by step...
Thanks in advance...

Hi Yüksel
Thank you for the reply It helped me to configure but i struck in some place.. Dispatcher is getting stopped... I tried to add 3 different sap servers in sapmmc and tried to start.. Three are getting same errors(Guess same error)
After your suggestion i was able to configure and start SIDadm of host but immediately or after 30sec Dispatcher gets stopped tried to find out some solutions but didnt worked... But i was able to start from there servers manually in linux way startsap, but not in SAPMMC way...
Could you or please help me in solving trace given below...
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      00
sid        W41
systemid   387 (Intel x86 with Linux)
relno      7000
patchlevel 0
patchno    353
intno      20050900
make:      single threaded, Unicode, optimized
pid        22162
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 22162) [dpxxdisp.c   1345]
shared lib "dw_xml.so" version 353 successfully loaded
shared lib "dw_xtc.so" version 353 successfully loaded
shared lib "dw_stl.so" version 353 successfully loaded
shared lib "dw_gui.so" version 353 successfully loaded
shared lib "dw_mdm.so" version 353 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Mar 31 00:02:41 2015
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0042.qqq.nxst) took 21 seconds
Tue Mar 31 00:02:52 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5540]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >willsys41_W41_00                        <
DpShMCreate: sizeof(wp_adm) 17120 (1712)
DpShMCreate: sizeof(tm_adm) 4480000 (22288)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/524056/524064
DpShMCreate: sizeof(comm_adm) 524064 (1036)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (92)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (68)
DpShMCreate: sizeof(vmc_adm) 0 (1684)
DpShMCreate: sizeof(wall_adm) (38456/34360/80/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x4ed2000, size: 5141584)
DpShMCreate: allocated sys_adm at 0x4ed2000
DpShMCreate: allocated wp_adm at 0x4ed4260
DpShMCreate: allocated tm_adm_list at 0x4ed8540
DpShMCreate: allocated tm_adm at 0x4ed8570
DpShMCreate: allocated wp_ca_adm at 0x531e170
DpShMCreate: allocated appc_ca_adm at 0x53251f0
DpShMCreate: allocated comm_adm at 0x5327770
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x53a7690
DpShMCreate: allocated gw_adm at 0x53a76d0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x53a7700
DpShMCreate: allocated wall_adm at 0x53a7790
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 240 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 239 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Mar 31 00:02:53 2015
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1752]
***LOG Q0K=> DpMsAttach, mscon ( willsys41) [dpxxdisp.c   12953]
DpStartStopMsg: send start message (myname is >willsys41_W41_00                        <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 5035 MB.
It should be two times larger than the amount of RAM (3066 MB).
See note 171356 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1532 MB!
Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
*** INFO Shm 13 in Pool 10    59082 KB estimated     58800 KB real (    -282 KB    -72 %)
CCMS: start to initalize 3.X shared alert area (first segment).
*** ERROR => DpWPCheck: W0 (pid 22217) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22217) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => DpWPCheck: W1 (pid 22218) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22218) exited with exit code 255
*** ERROR => DpWPCheck: W2 (pid 22219) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22219) exited with exit code 255
*** ERROR => DpWPCheck: W3 (pid 22220) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22220) exited with exit code 255
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:04 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Mar 31 07:03:04 2015
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA    22217 Ended         no      1   0        0
1 DIA    22218 Ended         no      1   0        0
2 DIA    22219 Ended         no      1   0        0
3 DIA    22220 Ended         no      1   0        0
4 UPD    22221 Ended         no      1   0        0
5 ENQ    22222 Ended         no      1   0        0
6 BTC    22223 Ended         no      1   0        0
7 BTC    22224 Ended         no      1   0        0
8 SPO    22225 Ended         no      1   0        0
9 UP2    22226 Ended         no      1   0        0
Dispatcher Queue Statistics Tue Mar 31 07:03:04 2015
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      4 |      4 |   2000 |      4 |      0 |
+------+--------+--------+--------+--------+--------+
| DIA |      1 |      1 |   2000 |      1 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 6
wake_evt_udp_now 1
wake events       total     5, udp     1 ( 20%), shm     4 ( 80%)
since last update total     5, udp     1 ( 20%), shm     4 ( 80%)
Dump of tm_adm structure: Tue Mar 31 07:03:04 2015
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 31 07:03:04 2015
=============================
Slots: 300, Used: 0, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:10 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >willsys41_W41_00                        < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing proc (22215) (SOFT_KILL)
Stop icman
killing proc (22216) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
kill(22215,0) -> ESRCH: process died
wait for end of icman
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:11 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:12 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:13 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:14 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:15 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:16 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:17 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:18 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:19 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:20 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:21 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:23 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >willsys41_W41_00                        <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
MsIBufAlloc: allocated buffer
NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
NiBufIIn: NIBUF len=458
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 458 bytes
MSG received, len 110+348, flag 4, from willsys41_W41_00    , typ 0, key FFFFFFFF00000000
DpHalt: received 348 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=214,pac=1,MESG_IO)
NiBufIIn: NIBUF len=214
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 214 bytes
MSG received, len 110+104, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 104 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Mar 31 00:03:24 2015
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13304]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 11 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed last sock 11 (pos=3)
NiSelIRemove: removed hdl 2
NiICloseHandle: shutdown and close hdl 2 / sock 11
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_00_000
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0xcef3328 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmDelete( 13 )
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x5e1000)
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x5e1000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x4ed2000)
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x4ed2000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x1655000)
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x1655000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 14 ) = 0740 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 11, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 42, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 43, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 45, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 44, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 46, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 47, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 17, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x6e14000)
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x6e14000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x60b000)
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x60b000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x151f000 )
ShmCleanup SHM_NO_BUFFER
ShmCleanup( 48 )
ShmCreate( 48, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 48, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xbf99a5d8 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x573d000)
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x573d000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 76000000 )
ShmCreate( 10, 0, 2, -> 0x0xb3723000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xbf99a5c8 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x8b30e000)
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x8b30e000 )
MpiCleanup() -> 0
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 15 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 36 ) = 0740 (octal)
SemKeyPermission( 37 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 45 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 50 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 59 ) = 0740 (octal)
SemKeyPermission( 62 ) = 0740 (octal)
SemKeyPermission( 63 ) = 0740 (octal)
SemKeyPermission( 64 ) = 0740 (octal)
SemKeyPermission( 65 ) = 0740 (octal)
SemKeyPermission( 66 ) = 0740 (octal)
SemKeyPermission( 67 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
SemKeyPermission( 72 ) = 0740 (octal)
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 8
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10
***LOG Q05=> DpHalt, DPStop ( 22162) [dpxxdisp.c   11739]
*** shutdown completed - server stopped ***
Thanks in advance....
Regards,
Sundar

Mac Pro 12-core won't boot Mac OS X 10.6 "Server" Install DVD

I have just received my new Mac Pro 12-core today.
I tried to boot from my Mac OS X Server (10.6) Install DVD with no success.
I WAS able to "upgrade" from the preinstalled Mac OS X 10.6.4, but I need a clean installation.
I first thought there was a problem with the internal DVD drive, but I could boot the provided Mac OS X Install DVD. I also tried to boot the "Server" DVD from a firewire external DVD drive, with no success. I even tried "target" mode, using the DVD drive from a Mac Book Pro, with no success.
The server install DVD is not corrupted, as I used it recently on my 2007 Mac Pro 8-core.
Please help.

New hardware = newer minimum OS build
Mid 2010 Specs: http://support.apple.com/kb/SP589
http://www.apple.com/support/macpro/
Mac Pro (Mid 2010) Aug 2010 10.6.4 - 10F2251
Mac Pro with Mac OS X Server (Mid 2010) Aug 2010 10.6.4 - 10F2252 (Server)
http://support.apple.com/kb/HT1159
In Xserve and some Mac Pro configurations where the Mac OS X Server operating system is installed on an SSD drive and data for services is housed on internal drives, an internal RAID, or an external RAID, some services may not start up properly or may not be able to find the associated data during the startup process.
http://support.apple.com/kb/TS3286
*Mac OS X Server 10.6.4 Update for Mac Pro (Mid 2010)*
The 10.6.4 update is recommended for all servers currently running Snow Leopard Server version 10 .6.3. It includes Wiki Server Update 1.0, Safari 5 and general operating system fixes that enhance the stability, compatibility and security of your server, as well as specific fixes for:
http://support.apple.com/kb/DL1082
Mac Pro (Mid 2010) - Technical Specifications
Logic Express Mac OS X Server v10.6 (Unlimited-client license) Apple Remote Desktop
http://support.apple.com/kb/SP589
Mac Pro Mid 2010 Server Update:
http://support.apple.com/kb/DL1082
http://support.apple.com/downloads/
Mac Pro (Mid 2010) - User Guide
http://manuals.info.apple.com/enUS/Mac_Pro_Mid2010_UG5686.pdf
Congrats!

Ovm server install failure: UnboundLocalError: local variable 'dev' referenced before assignment

I'm getting the above error on the server install.
Here's the first line in the failure:
File "/usr/lib/anaconda/network.py", line 685, in write
if dev.get('BOOTPROTO').lower() in ['dhcp', 'ibft']:...
From my research it appears to be a known bug. I've tried to install each version of oracle vm server (from 3.03 up) and have found the same error. Is there any workaround other than installing a new NIC?
7.2.7. Oracle VM Server Installation Fails
with Broadcom Gigabit Ethernet Controller
Installing Oracle VM Server on a system such as the Dell 380, with a Broadcom
Gigabit Ethernet Controller fails with an error similar to the following
example:
Traceback (most recent call first): File "/usr/lib/anaconda/network.py", line 685, in write if dev.get('BOOTPROTO').lower() in ['dhcp', 'ibft']: File "/usr/lib/anaconda/yuminstall.py", line 1394, in doPreInstall anaconda.id.network.write(anaconda.rootPath) File "/usr/lib/anaconda/backend.py", line 184, in doPreInstall anaconda.backend.doPreInstall(anaconda) File "/usr/lib/anaconda/dispatch.py", line 207, in moveStep
The installer cannot detect the network adapter, so fails to complete the
installation.
Bug 13387076

It is a known issue. http://docs.oracle.com/cd/E27300_01/E27307/html/vmrns-bugs.html#id376822
I've tried to build an initrd image with the nic driver. But it failed. I tried using RHEL x86_64 based driver. Couldn't find the kernel-headers for the appropriate uek kernel. I guess once the kernel header is available it should be fairly easy to pass the driver.
Alternatively you could try installing another NIC and it should go through smooth.

Can flash media live encoder feed stream to remote adobe media server installed on other machine?

Hi All,
i have installed Flash Media Live Encoder 3.2 on my one machine xxx and AMS version 5 on another machine yyy.
i am trying to configure FMLE for ams server URL - i.e. stream to flash media server option on FMLE. I have generated FMS URL as "rtmp://yyy/live" and clicked "connect" to. Its not getting connected to it.
please find attachment for error.
is there any restriction that our AMS should be on same machine wehere we have installed flash media live encoder ??
please help on this!!

If you have any trouble to understand from above query then please go through following scenarios and do reply if you have answers to it.
I have installed Flash Media Live Encoder 3.2 on my machine and Adobe Media Server 5.0.3 on another machine.
My requirement is to stream RTMP from Flash Media Live Encoder which is installed on my machine(source) and receive RTMP stream on Adobe Media Server which is installed on another machine.
I am unable to connect to "rtmp://<"IP Address of Adobe Media Server installed system">/live on AMS installed machine.
Atached please find the error message screen shot:
Are there any restriction that Adobe Media Server and Flash Media Live Encoder must be installed on the same machine?

UCCX HA server install

Similar Messages

Maybe you are looking for