UCCX Issue when doing VMWare Snapshots

Hi all.
I've been using UCCX 8.5 on VMWare with local storage for about a year.  I use VEEAM Backup to make backups of all my virtual servers.  One issue I've run accross is that when VEEAM takes a snapshot of the UCCX server, the agents are logged out of Cisco Agent Desktop and get an error.  I've managed to work around this by making backups run after our call center is closed (Today, however, I accidentally ran a backup and irritated the call center managers when all their users got logged out).
I've surmised from the various documents I've read that snapshots are not supported.  I'm wondering how others using CCX on VMWare do their backups and if there are any clever work-arounds to this issue.

Thanks for the reply Chris.  I failed to mention that I am doing the DRS backups as well.
However, restoring the entire VM in the event of hardware failure is by far the simplest method of quick recovery.

Similar Messages

  • Issue when doing mb1c

    Hi I encountered below question when doing mb1c for 561 movement, it is weird I am doing ok for a material which is exactly same valuation as the one with error message,I meant valuation class is same, also checked obyc ...so any other field in material master will occur that error?
    Account 34210100 requires an assignment to a CO object

    Hi,
    When you do GR with 561 movement type , it will update following accounts with transaction keys are:
    Inventory of Materials (BSX): Dr
    Initial Upload Materials (GBB-BSA): Dr
    As you have error now, now check the G/L account 34210100 created as cost element or not u2026u2026u2026u2026u2026ie ...so asking cost object. Or just try to assign another G/L account in OBYC t.code for GBB-BSA combination and then do GR with 561 movement type
    Regards,
    Biju K

  • Memory consumption issues (when doing large batches of photos)

    I have a user who reports my plugin consumes memory until Lr/System is no longer operable, when doing large batches of photos.
    I have this type of problem too from time to time, but not always, and in the most recent case, *not* for the same operation my client is complaining about.
    Begs the question: is there a way to control whether excessive memory is used, or force it to be released, when doing an operation upon large batches of photos.
    Note: the operation is already concluding catalog transactions every 1000 photos (exits with-write function, and re-enters). My client reports Lr/System slowdown at about 4000 photos. He is running Lr3, Windows OS - system details not yet known.
    Rob

    Hey Rob
    Have you already tried John R. Ellis idea of reducing the transaction size? I remember from another project we had to limit the transaction size on a SQLite based database due to memory problems.
    Maybe you are facing a different problem - not sure how efficient LUAs garbage collection is and your code causes some kind of memory leaks somewhere.
    Daniel

  • Issue when doing Levels as last step

    After using the Healing Brush, Clone Tool, Sponge tool, etc. I do Levels Adjustment Layer and it results in the issues in the attached image. Is there a way to avoid this other then doing Levels at the very beginning? The only other way I found around this was to flatten the image prior to doing Levels.
    Thanks.

    I would guess from the image you posted that you cloned and healed onto a new empty layer and when you added the level adjustment layer you clipped it to that layer when it should be applied to all layers not just the clone and healing layer.

  • Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

    Hi All,
    I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
    2 of the DTP loads are extracting the data from 3 PSA requests.
    But, one of the DTP load is filtering on ONE PSA request.
    So, we are not getting the full data into DSO.
    Can some one pls help me why the DTP load is beheaving like this ???
    Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
    Cheers,
    Nisha

    Hi Jr,
    Sorry for late reply.
    I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
    I have changed it now and its working fine.
    Thanks,
    Nisha

  • Serial Number not suitable for movement  when doing goods issue  or sto ?

    Dear all ,
    I have a issue , when doing sto or goods issue ,
    i have a material code serial number profile is off physical quantity is laying 20  and my requirement  is active the serial no
    and  assign to  serial number  for the material ,
    Tcode is iq01 put the material , serial number  and category after save when i am doing  ma1a putting material ,quantity
    and that serial number click on save ,  geting error like
    Stock data of serial number 1234 not suitable for movement
    when i am checking iq02 serial number is showing but checking in  MMbe there is not showing
    Regards
    Shiv

    hello,
    to activate the serial numbers you first have to clear all the stock for this material (MVT 562 / 502 or other)
    Than activate the serial in the material muster.
    in your situation (if i understood correctly) what you need is:
    1.  disable the serial numbers for the material (move them to another material)
    2. deactivate the serial number in the material master
    3. get rid of all the stack - post it with  562 or 502
    4. activate serial numbers
    5. post the material back to stock - 561 / 501 - than the system will require a serial number for each unit

  • What are the risks when doing a Delete / Re-load of Data in InfoCube?

    Hi,
    What are the risks/issues when doing a complete Delete / Re-load of Data in InfoCube?
    Rgds,
    Mark.

    We are introducing a new Key Figure to the InfoCube and this KF needs historical data.
    The only way I thought this could be achieved was by deleting the data from the InfoCube and re-loading it (It gets loaded from R/3 with no ODS used).
    Is this the only way or are there other options in a BW 3.5 environment?

  • My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

    My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

    Turn off Voice Control.
    Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

  • Does resteasy API have class loader issues when using via OSGi

    Does resteasy API have class loader issues when using via OSGi

    Hi Scott,
    THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
    com.sap.portal.pcm.system.ISystems
    com.sap.portal.pcm.system.ISystem
    and under which path I coul dfind them.
    Thnx
    Regards
    Meesum.

  • Strange issue encountered when doing costing run

    Dear experts,
    I encountered a strange problem when doing costign run use CK40N.
    I created a costing run on 23.12.2010 In the costing  run the validity was set  from 01.01.2011 to 31.12.2011, I did all the steps except release, all steps were done successfully
    I released costing run on 01.01.2011, but when I hit a material to check the costing date, found the costing was only avaliable to 31.01.2011 not 31.12.2011.
    I was wondering if any actions or modifications done will affact on the costing date of material?
    Have you ever meet this problems?
    Please give me some help.
    Thanks for your time and concern.
    Regards,
    Anna

    Hi Sarada & ajay
    Thanks for your comment.
    The most strange thing is...
    When I display costing run, the valid to date is 31.12.2011, but in material, it shows 31.01.2011....
    I did test again, to change the valid to date in CK40N of the costing run, but the result is, date in material alway the same with what displayed in costing run in T-code CK40N.
    One more information, we usually do costing run per month, and we just change to valid date to end of year from 2011.
    At first I thought it might have some relation with modifications to costing variant, but after doing test, the modifications will not affect.
    The valid date in material should always be the same with what displayed in costing run.
    And after the first step 'Selection' in costing run, the date will not be changed.
    So I could not come out with any idea with issue......

  • Rastertoescpll error issue when trying to print to my Epson Artisan 835.  Does anyone know what I need to do to correct?

    I am getting a rastertoescpll error when attempting to print to my Epson Artisan 835 printer.  I have checked the printer and it doesn't seem to be the issue.  Does anyone have suggestions as to how to remedy?

    Click here >>
    http://er.epson.com:8001/start?TM=false&CMD=iSearch&CB=1886098778&LG=1&TP=Novice Case&Q1-1-1886433252=1886433723&FI=1&firstQuestionID=Q1-1-1886433252&firstAnswer ID=1886433723&category=allinone&model=art835&displaymodel=Epson+Artisan+835&refe rralmodel=Epson-Artisan-835&pid=C11CA73201

  • Where to enter the Assembly serial number when doing WIP Component ISSUE

    Hello Oracle Guru`s,
    I am performing Kit completion via API`s. I am able to perform Move transaction(have inserted in apps.WIP_MOVE_TXN_INTERFACE) and Completion Transaction(apps.mtl_transactions_interface, apps.mtl_serial_numbers_interface and apps.CST_COMP_SNAP_INTERFACE)
    When doing the Issue(Matreial transaction) , i am inserting in the apps.mtl_transactions_interface and apps.mtl_serial_numbers_interface, where do i enter the Assembly serial number? I would like to know, in what assembly serial number is my component residing.
    Aslo, when doing the issue(inserting in mtl_transactions_interface ), why is it important to enter the operation_seq_num and department_id? and what should be the value in these columns.
    we are using Average Costing.
    TX in advance for you reply.
    Regards,
    K

    Hello KING,
    Did you try doing online transaction for this case.
    I believe that you can enter parent serial number while entering serial number for components during online transaction. With this test, you can check that what column assembly number is going and you can try same in your background processing.
    Thanks,
    Ritesh

  • Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.

    All, 
    I attemped same using Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.  I switched out skins and same issue.  I am using IE8. 
    When published as swf, exit button on skin works fine.  Any ideas on solve for the PDF version exit button?  We would rather publish as PDF since all files are contained in the PDF wrapper.

    Hello,
    Welcome to Adobe Forums.
    This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
    Thank you for your patience.
    Regards,
    Vikram

  • I changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna i

    i changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna import something, if anybody has a idea??

    Hi
    This any help?
    http://support.apple.com/kb/TS3968
    CCT

  • IPhone 5 still using 6.0.1 because of battery issues. Now hearing about battery issues w/ 6.1, too. When does anyone think it'll be safe to upgrade to 6.1

    iPhone 5 still using 6.0.1 because of battery issues. Now hearing about battery issues w/ 6.1, too. When does anyone think it'll be safe to upgrade to 6.1

    Any time you want.  I've upgraded to 6.1 the day it came out and have no battery issue.

Maybe you are looking for