UCCX-Max JTAPI triggers that can be associated with a single script

Hi,
     We are on UCCX 7.0(1)SR5 cluster. I would like to know if there is any maximum limit on the number of JTAPI triggers that can be associated with a single UCCX application/script. I have this requirement where in I will have to create 80+ JTAPI triggers and associate all of them to a single UCCX script. Will there be any impact on the performance with this approach?
My second question is- is there a limit on the number of sessions that can be associated with a single UCCX application?
Thanks,
DM

There is no need to have multiple chained CTI Route Points. The call should flow through UCM as follows:
Arrives from a PSTN gateway with a specific DNIS value per number. In most cases carriers will not give you the real toll-free number that was called but either another DNIS value representing each toll-free number; or, a portion of it such as the last four digits.
In many cases - but not necessarily required - customers then use translation patterns to change the provided value into a value that the CCX CTI Route Points are configured in. For example, if the provider is sending you a DNIS of 84XX of the toll-free calls and you want the CTI RPs to be 71XX, you can create a translation pattern that does exactly that.
You create a single trigger (assuming all the toll-free numbers go to the same script/application) and use a wildcard pattern of 71XX when creating it.
(More Optional) If the script needs to know the exact toll-free number that was dialed, you can use the Get Call Contact Info step to get the called number.
Otherwise the script wouldn't be aware that you've used wildcards in the route point.

Similar Messages

  • What is the maximum number of samples that can be acquired with a single trigger using PCI-6036E DAQ card?

    1. My PCI-6036E card has a FIFO of 1024 bytes in AI. Maximum how many samples can be acquired with single trigger for digitizing a waveform?
    2. PCI-6036E DAQ card has got a AO with 10ks/s update rate? Can I generate a pulsed output with the AO of this card? I need a pulse of, say, 5 V and 1 kHz frequency.

    Giri,
    1.The trigger is usually for enabling the acquisition. I mean, when it is logic zero, you acquire nothing; however, when it is logic one, you start acquiring your waveform,and you can acquire continuously without having to worry about how many samples, unless you want to set your program for doing so. You can acquire continuously by implementing buffer acquisition. Finally, the FIFO that is in the board will not affect the buffer acquisition.
    2.Yes, you can do that! You can generate your 5V signal with that specific frequency, and you should not have any problems, because the freq fits in the update rate.
    I hope this information is helpful.
    L Aguila
    Applications Engineer
    National Instruments

  • How many iPhones (4, 4S, and 5) can be associated with one iCloud account?

    I would like to use the iCloud account to associate with Find My iPhone in a corporate environment for security and loss prevention. I know that iTunes accounts are limited at ten devices per account. However, I cannot find a definative number of devices that can be associated with a single iCloud account. Any information on this would be very helpful. Thank you.

    There is no published limit.
    iCloud is not really a great solution for Corporate security and loss prevention.  An exchange server profile on the device would be a better solution.  While that will not provide tracking, the Find My iPhone feature is easily defeatable and is intended more for lost devices than stolen devices.

  • I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    You may be able to find your Apple ID at Look up your old and forgotten Apple ID

  • A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

    A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

    Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID).  That would in effect do what you want, get rid of the old and give you the new.
    See "Apple ID: Changing your Apple ID"
    ivan

  • I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I cant get a reset all of my credentials dont work.

    I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I can’t get a reset all of my credentials don’t work. Now all my apps won’t work. it looks like they load for half a second then disappear. What can I do?

    - Try contacting iTunes for the password problem:
    Apple - Support - iTunes - Contact Us
    - For the other problem you can try a reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The next standard thing to do is to download/install a new app but you cant 'do that.
    - Instead, try restoring from backup.

  • Number of elements that can be used with 'in' Operator

    One of my SQL query having 'in' operator failed saying number of elements exceed.
    Is there a limit on number of elements that can be used with - 'in' operator.
    And if yes can it be increased?

    Parag Kalra wrote:
    One of my SQL query having 'in' operator failed saying number of elements exceed.
    Is there a limit on number of elements that can be used with - 'in' operator.
    And if yes can it be increased?You cannot have more than 1000 literals in an IN clause.
    Please check
    ORA-01795, limit on in clause
    Max number of values in IN clause
    Edited by: Rajesh Lathwal on May 24, 2010 12:28 PM

  • I want to establish a new and separate Apple ID from my husband's.  We have six Apple devices between us that are aleady associated with our current joint ID.How is this done?

    I want to establish a new and separate Apple ID from my husband's.  We have six Apple devices between us that are aleady associated with our current joint ID.How is this done?

    In order to have a separate 5GB of storage he would need to have his own iCloud account with a separate ID.  You can still share the same ID for iTunes; it does not need to be the same as the ID used for iCloud.
    In order to migrate his phone to a separate account, begin by saving any photo stream photos that he wants to keep on his phone to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos he wants to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud on his phone, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  Other devices still using the account will not be effected by this.)  When prompted about what to do with the iCloud data, choose Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to his new account.
    Finally, if there is any merged data in the accounts you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want from each account.

  • I have two iTunes accounts.  When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad.  Ian trying to link it to the other account instead

    I have two iTunes accounts.  When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad.  I am trying to link it to the other account instead

    johnfromnorth andover wrote:
    I have two iTunes accounts
    Why?
    When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad.  I am trying to link it to the other account instead
    You want to uise the newer account with the iPad?
    Settings > Store.
    Tap account, sign out then sign in with the account you want.

  • I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

    I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

    You do not merge libraries.
    iDevices sync to one and only one computer.
    If you want a single library, you manually move the content from one library to another... all content will still be associated with the Apple ID it was acquired with.

  • Systems that can be intergrated with 11i Vs R12

    What are the systems that can be integrated with R12 but not with 11i
    Thanks

    user592830 wrote:
    What are the systems that can be integrated with R12 but not with 11iYour question is not clear, please elaborate more.
    Thanks,
    Hussein

  • Is there a limit on the size of SDHC card that can be read with the iPad camera connectioin kit?

    Is there a limit on the size of SDHC card that can be read with the iPad camera connection kit?

    I've successfully connected 32 gig SDHC and CF cards so if there is an upper limit, it's at least 32 gig.
    I know SDXC will not work.
    With the cards that don't work, have they been formatted correctly? the camera connection kit will only read cards holding images. (Well, it'll only see the images) And those images have to have a file name of exactly 8 characters (DSC_2342 for example) and they  have to be in a folder named DCIM.
    Anything else it wont' read.
    I put a photo on there called 'Christmas' and the connection kit won't see it. I put a photo on there in the DCIM folder named XMAS2342 it'll see that.
    So it's possible that those cards weren't read because they weren't speaking the right language.

  • Why Adobe Reader XI cannot open a pdf file that can be opened with Reader 9?

    Why Adobe Reader XI cannot open a pdf file within a browser that can be opened with Reader 9?

    Hi Steve,
    Sorry, I cannot post a URL to the file because it is for intenal use only.
    I noticed that the pdf file can be opened outside of IE browser if I disable the Adobe Reader add-on (active-X) in IE browser. If I enable the Reader add-on, the Reader cannot complete the file download. The progress bar goes in a half way, and stays there.
    Just FYI, the pdf file was created by Distiller 7. Do you think it is the issue of Reader add-on? Thanks.

  • Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

    If this happens on monitor 2 of 2, this problem has been solved here:
    http://support.mozilla.com/en-US/questions/794823#answer-157988
    Go to "Firefox"--> "Options" --> "Advanced"
    Then un-check "Use hardware acceleration when available"
    While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

  • Lee3 May 25, 2012 5:36 AM  I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!     Is there someone that can assist me with this issue?  : /

    Lee3
            May 25, 2012 5:36 AM   
    I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!
    Is there someone that can assist me with this issue?
    :>/

    How long did you wait for the download to run?  The last time I downloaded the Windows support files for Boot Camp, it was going very slowly, so I swapped away to another task.  Several minutes later I came back and it had moved a little, but not much, so I went on with other things.  When I got back to it several hours later, the download had completed.  Perhaps you just need to let it go overnight to perform the downloads...

Maybe you are looking for