UCCX redirect external busy

Hello,
I want to make in a UCCX 8.5 an external redirect in a script.
The problem is that when the external phone is busy the script should go on.
I 've tested this with a internal number and there i can use the busy case in the redirect step.
When I type in an external extension the call goes to this extension when the script come to this point.
But when the external extension is typed in and this extension is busy the caller hears the busy tone called the uccx application.
I have a h323 Gateway and CUCM 8.6
In the q931 debug I can see the user busy.
Is there a way that on an external number the script goes on when this number is busy?
regards
Marco

Use consult transfer step instead.
Chris

Similar Messages

Problem with query an External Business Component!

Hi guys,
I have created a Business Object based on an External Business Component.
In a WorkFlow in a step of type 'Siebel Operation' for operation I chose 'Query'.
In the section 'Search Spec Input Argument'
For 'Search Specification' I tiped " [Flag] <> 'N' " and no rows are selected :( (for sure there are rows in the table that are true for this condition)
For 'Expression Business Component' and 'Filter Business Component' I tiped my BC
I also would like to mentioned my BC has a field with 'Name' = 'Flag'
I am not sure that my description is quite clear, if you have any questions please ask.
Edited by: slyy on Jun 10, 2010 11:41 PM

Is the WF based on a Business Object i.e. does the WF record (where you specify Workflow Mode, and give it a name) have an entry in the Business Object field?
If it does, is the Business Component that you try to query on the driving business component of that business object?
If not, then that is the problem.
Axel

BPEXT - External Business Partner Field is cleared in BP Tcode

Hi All,
Making any change in the customer/partner details in XD02 Tcodefor the same customer number, the BPEXT - External Business Partner field is getting cleared in BP TCode as well as from the table BUT000
Please let us know for any SAP Note or workaround through which we can solve this issue.
Thanks in advance.
Regards.
Abhinav

Hi,
Please go to TCode SNRO and check if the buffering is active for object BU_PARTNER.
If yes, you should disable it to have a sequential numbering.
Go to Edit menu - set up buffering - no buffering
Best regards,
Itajaci Júnior

External Business Component vs Web Service

Hello,
We are using Siebel 8.1 and we are in need of referencing data in a external data source (DB2) that needs to present in a read only format this information within Siebel. We are trying to find the best path based on using
1. External Business Component
2. Obtain the data when needed via a web service
Option 1 is described in the training materials we have from the training courses we've taken, but web services are the corporate standard, since using a web service would insulate the Siebel application from changes that happen to the external database and would be reusable.
So far, we have been unable to determine how to call a web service from an applet that displays the data. The closest we've been able to come is to create a task flow to run the web service, and then place the data into a transient business component.
Does anyone have any recommendations or past experiences related to this they can share for the best path?
Thanks,
Bob

Hi Bob,
As you said you would be using web service approach. I feel following would be good method to display web service data in Siebel Applets
1.     Create Virtual Business Component (VBC)
2.     Create Applet Based on VBC
3.     Create Customer Business Service which will call web service and display data in applet
You can use “SIA Billing Extern Service” to minimize script. This Service uses input output in the form of integration object structure. So using it you can directly map web service output to VBC fields.
Thank you,
Sharad

Linking External Business objects of ECC to Case in Webclient

Hi guys,
i have a requirement where i need to link external business object like BUS2080(Service Order),BUS2088(Service Notification) in record of UI component CRMCMP_CMG(CRMCMP_CMG/RecordTree ).
I have done the below configuarions:
1) where i have created registry entry for the external object types.Defined the element types for the external objects.
2) then i have done " Assign Element Types and Business Object Types to a Process'.
3)Also implemented the BADI CRM_CMG_ADD_OBJECT to link the external business objects.
Now i want to see these external business objects in the wbclient component view CRMCMP_CMG/RecordTree.
But couldn't get the objects there only i can find the standard record model with CRM Business objects only.
If any one has worked in case management in webclient to link the objects please share your inputs .Also if anybody have any idea please share.
Regards
Snehasish

Hi, did you find a solution already to your problem? We are facing the same problem.
In the backend transaction (CRM in Sapgui) it's working fine, but in the CRM_UI transaction the reference object cannot be selected from the dropdown menu...
Please let me know if you have a solution.
Best regards,
Marcel

Not able view full name of external business partner in Lync online meeting.

Hi
I am not able view full name of external business partner in Lync online meeting.it is showing only First Letter and position title.
example( D...Global Team Lead)
It is difficult to find the names please help me, what will be the problem.
Thanks...

Hi,
Did the issue happen for one partner or for multiple partners?
Did the issue happen for single online meeting with external business partner or for multiple online meetings?
Please update to the latest version for Lync server and Lync client and then test again.
In my Lync environment, on a Lync online meeting which included external federation users, I can see the full name of them.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Sending e-mail twice to External Business Partner

Hi,
   Our system is sending two e-mails to our supplier, one of them with details about his data and another one with user and password.
   Where can I define one e-mail only with both data? Suppplier data and user/password for external Business Partner.
    I configure until now into the SE61 the "PARTNER REQUEST ACCEPTED" message, but still sending two e-mail like I said above.
   Thanks in advance.

Hi Alexandre,
This is standard system behaviour to send the email with username/password separately.
Regards,
Nikhil

UCCX Redirect Step and Local Route Groups

Hello,
CUCM 9.1.2
UCCX 9.0
I have come across a situation in one of our UCCX scripts with the call redirect step where it is forwarded to a local cell phone for after hours calls. The number in the Call Redirect step is 9, followed by the 10-digit number of the cell.
While the call does redirect successfully from the UCCX script, the call always uses the local route group of the original calling party's device. So, if the call from an IP Phone to the cell is going out the gateway where the cell number is a local call, the 9 followed by the 10 digit number works fine.
If it's a site across the WAN, the call redirect to the cell fails because it's using LRG of the calling party's phone and thus it needs to be a long distance call.
I kind of thought the Service Parameter Local route group for redirected calls being set to "Local route group of last redirecting party" might have addressed this, like it did for call forward all situations, but it does not seem to be the case.
Would the recommendation be to use Call Consult Transfer instead of the Call Redirect step? This seems to work, but was wondering if there were other ways to approach it.
Thanks for your help,
Frank

Hi Anthony,
Thanks for the reply. The Call Consult Transfer step did resolve my issue, so now the call is always coming from the local site and using the LRG of the DP of the CTI ports. I previously had it set up using the Call Redirect step in the script with 9 followed by the 10-digit number, and thus it was kind of not working when calling over the WAN from remote sites.
I should have mentioned that we recently did an CUCM / CCX upgrade. In CUCM, all call restrictions were previously done at the device level, nothing on the line. Now we have the line doing the call restrictions. So the Call Redirect step worked fine in the old environment with the 10-digit number, not so much in the new.
But I like your suggestion about +E164 even better, since we rolled that into the upgrade as well. I tried putting the full +E164 number in the script using the Call Redirect step. Works perfectly from all sites.
Thanks for your help.
Frank

Delete external business partner number range

Hi SRM gurus
We have implemented a BADI to prevent vendors of certain acct. group from rpelicating to SRM from R/3. Now we want to change the number range of business partner in SRM, which is external no. range. I want to confirm can we delete the external no. range and create a new external no. in SRM under the navigation, will it cause any side effects. SPRO->cross apllication->SAP Business partner->Busniess partner ->number ranges and groupings.
Preste no. range is
400000 - 600000 (PO) external
700000 - 1000000 (XI) external
I want to delete the PO no. range and create a no. range for XI which will look like:
400000 - 1000000 (XI) external.
with regards
Manjunath

Hi
To avoid the problem of data loosing, pl setup number ranges as follows:
Menu: SPRO --> Cross-Application Components → SAP Business Partner → Business Partner → Basic Settings → Number Ranges and Groupings → Define Groupings and Assign Number Ranges
Maintain both internal numbers and external number ranges here. The external number range should correspond with the R/3 vendor number range. Then you will not have a problem of data loosing.
You have another configuration point in SRM that enable you to define number range by backend for PO, RS and RQ.
Please read the configuration help taht give you an example in transaction SPRO.
Some related links ->
Re: Impossible to Replicate alpha numeric Vendors from R/3 to EBP
Re: External number assignment - vendor replication
Number range for business partner
Delete business partner from SRM
Re: Vendor replication
Re: Unable to replicate both Numeric and alpha numeric vendors records from
Other related links ->
Using transaction "BP" which has the number "##1" delete the required Business partner. Also try using reports DELETE_ALL_BBP_USERS and BUPA_TEST_DELETE to delete Business partners.
Re: How to delete a user in the Organizational structure
Do let me know.
Regards
- Atul

External business partner number generation

Hi all,
Our client has the following requirement:
Business partner numbers must be generated according to certain rules, which cannot be replicated using standard number ranges.
My option is to define a single external number range, and then implement an algorithm that generates BP number. However, I'm not being able to identify where I can make this implementation. I have tried to find a user-exit or a BADI in order to do this, but I wasn't successful.
Can anyone help me identifying an exit or a BADI for Business Partner master data?
Thanks in advance.
Regards,
Joã

Hi
To avoid the problem of data loosing, pl setup number ranges as follows:
Menu: SPRO --> Cross-Application Components → SAP Business Partner → Business Partner → Basic Settings → Number Ranges and Groupings → Define Groupings and Assign Number Ranges
Maintain both internal numbers and external number ranges here. The external number range should correspond with the R/3 vendor number range. Then you will not have a problem of data loosing.
You have another configuration point in SRM that enable you to define number range by backend for PO, RS and RQ.
Please read the configuration help taht give you an example in transaction SPRO.
Some related links ->
Re: Impossible to Replicate alpha numeric Vendors from R/3 to EBP
Re: External number assignment - vendor replication
Number range for business partner
Delete business partner from SRM
Re: Vendor replication
Re: Unable to replicate both Numeric and alpha numeric vendors records from
Other related links ->
Using transaction "BP" which has the number "##1" delete the required Business partner. Also try using reports DELETE_ALL_BBP_USERS and BUPA_TEST_DELETE to delete Business partners.
Re: How to delete a user in the Organizational structure
Do let me know.
Regards
- Atul

Is it possible to redirect external user to external address

Hello,
i need to redirect some external requests to another external ip(through the same interface), how it could be performed?
I tried
ip nat outside souce static MAP-ADDRESS REAL-ADDRESS
but without success.
Thanks in advance

Hello
You wish to redirect traffic back out of the same interface it came in on?
If that the case why is it coimg to you in the first place! - Im not sure I ubderstand your request?
Res
Paul

Sbs2003 does not redirect external users to correct website on a member server

I have both an SBS2003 server with MOSS2007, and on a second server box, I've installed an additional domain controller (Server 2008 R2) w/ DNS, IIS7, and SharePoint Server 2010.
Internally, I can visit http://MOSS2007 (example) or
http://SPS2010 (example) from any device on the network and it takes me to the correct website on the first or second box, respectively. I can also visit
http://MOSS2007.domain.com (example) or
http://SPS2010.domain.com (example) with no problems.
Externally, I can visit http://SBS2003.domain.com (example) and get the "welcome to small business server" webpage. I can also visit
http://MOSS2007.domain.com (example) and visit the first server box with no problems. However, visiting
http://SPS2010.domain.com (example) simply shows the "welcome to small business server" webpage.
I can't figure out why SPS2010.domain.com won't display properly to external users outside the network.
Any help would be greatly appreciated.

I really hope it is ISA 2004 and not ISA 2000.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

External Business Connector to ECC via XI

Hi,
i have following scenario:
external customer of our client sends IDocs via BC to XI, from XI to ECC.
XI to ECC is no problem but i have doubts in using BC-Sender-Adapter.
Doubts concerning what kind of paramters the client needs to send IDoc to XI. Because it is HTTP-Protocol he needs an URL! Can anyone provide me this URL?
Or do i need a RFC additionally?!
Does someboday has a step-by-step solution?
Need help - br Jens

Hi ok because i am not aware of everything i have to do to make this scenario work i have at least this question.
Because i have to give the sender an URL for the PlainHTTP Sender-Adapter the URL has to be like this:
http://xxxxx:8000/sap/xi/adapter_plain?namespace=http%3A//sap.com/xi/yyyyy&interface=abcd&service=ghj&sap-user=skapu&sap-password=super
But in case of Idoc-Tunneling, what will be the interface=abcd - will it be the IDoc itself and when how does it have to look like?!
really appreciate ur help so far,
br Jens

Redirect external user (internet) & internal user (intranet)

Hi, we are developing a public portal services in which we have two kind of user: a) public user that access through internet to the portal. b) internal user that access inside a domain to the portal.
We want to know How we can know which is the external and which is the internal in order to assign a portal desktop.
I have seen in the forms the following options:
1.-> IISPROXY
2.-> SPNEGO
3.-> APACHE & SAPDISPATCHER
1.-> It seems that we the last release of the portal is obsolete
2.-> It seems that SPNEGO is for internal use only (intranet).
3.-> I have not documentation about.
I would be very grateful if someone give a solution and documentation or links about it.
Thanks in advanced.
Regards.

Hi Optima,
You can use a appIntegrator to distinguish intranet/ extranet users..
Have a look at "HowToUseAppIntegrator_en.pdf" from service market place.
This weblog should give you some idea about appintegrator: Step-By-Step Guide to implement Application Integrator
Regards,
SK.

Mapping External Business Partner ID to Internal Id

Hi all,
Is there a standard functionality to map a external BP to an internal one?
Thanks a lot,
Fabian

Hi Fabian
For external parter ID you need to set up partner profile only. WE20
Thanks
Ashok
Assign points for useful answer

UCCX redirect external busy

Similar Messages

Maybe you are looking for