UCCX script editor not working
1-The loading bar down of the screen always loading and never finishes.Please take a look to the attached picture.
2-When i go to the uccx and want to change the server from hostname to ip address,i always get update failed.
I am so new in uccx,help is appreciated.
Thanks in advance.
Hello,
You have come to the right place to ask questions on UCCX.
Please take some time to read through the product manuals, as they are full of good information and will answer most of your questions.
UCCX Documentation Home Page
http://www.cisco.com/en/US/customer/products/sw/custcosw/ps1846/tsd_products_support_series_home.html
On to your two questions:
1. This is not a loading bar. This bar is completely useless, and all it's telling you is how much memory the Editor has available to it in order to process things. The button to the right is simply a "garbage collector" which will attempt to free up any abandoned memory, but mostly it just sits there looking pretty. You really don't need to bother with either of these too status bar items, and can ignore them.
Source: UCCX Scripting Volume 1 - Getting Started with Scripts
2. It's been about two years since I've completed an install of UCCX, and therefore don't have this information fresh in my head. I did spend few minutes trying to find documentation on the topic, but to no avail. I was only really able to read the Help page for that specific page (Help > For This Page), however, it didn't make a big deal about changing the value. It simply says, change it and then click Save.
Could you post the exact error message you are receiving? Also, what is your intention with changing the hostname to IP? Unlike CUCM where you may want to remove DNS dependency on the phones to communicate with the server, UCCX clients use the IP address regardless. So perhaps it's not a necessary step?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.
Similar Messages
-
CCX 10.5 Script Editor Not Working Win7 Enterrpise 64 Bit
Anybody else running into this? Other colleagues stated that they have CCX 10.X editors working with Windows 7 32 bit.
My issue is that the initial splash screen comes up for a quick sec and goes away. I've tried Win XP compatibility and Run As Administrator.
Found this post where I think the original person was referring to CCX 7.0 and people replying where referring to the issue that I'm running into with CCX 10.5
https://supportforums.cisco.com/discussion/12149992/ccx-script-editor-hangs-win7-then-closes
Thanks,
DanHi Dan,
We have seen such issues with UCCX 10.5 editor. For some reason on the other issue, the editor was not installed in the correct location (default).
Solution:
* Uninstall the editor.
* Install the editor (Run as administrator) directly into Program files in the
path : C:\Program Files (x86)\wfavvid_1051
* Run the application by running it as Administrator.
* While uninstalling and reinstalling, try to keep the anti-virus disabled.
Let me know how it goes.
Regards,
Arundeep -
I have a problem with the script editor that is login (Windows login, not Oracle login) dependent. For some Windows users, the script editor doesn't work properly. For those users, the editor page will appear but the edit pane cannot be written. In addition the line number for the first line is not present. The buttons for upload and other functions do not function. If any scripts are already present, the icons appear, but clicking on them does not bring them up in the edit pane.
For other Windows users, everything works normally.
For all Windows users, the initial login to the database appears to work fine.
It is clear that the problem is related to some property of the Windows login for the various users, but I don't know where to start looking. Does anyone have a suggestion?
Thanks in advance.I am having this same problem in Linux. I am using Ubuntu 8.04 and I am following the tutorial at:http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm
I seem to be able to load a sample data file, but trying to access the file in the script editor, I cant see the file. I even tried to manually make a load_sample.sql file, but the script editor doesnt let me. Any help to get this working would be appreciated.
thanks,
blu..... -
Oracle XE script editor not working
Hi!
i installed oracle xe on windows vista.
But somehow i cant seem to use the script editor i.e. i cannot type in anything into the editor.
the entire editor just appears red.
browser: Google Chrome.
please reply
Edited by: user10296156 on Jan 21, 2010 9:13 AMTry using Firefox or IE (ugh!).
:p -
Email Notification Script is Not Working in Windows Server 2012..
Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task> -
Script does not work anymore after updating to FM 12.0.3
Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know. -
Cross-frame scripting is not working in Safari 3.0.4. Minimal example code.
Hello,
I've found that cross-frame scripting is not working in Safari 3.0.4, as it worked
ok on Safari 3.0.1, and in other browsers I tried: Firefox, Mozilla, IE.
document.domain property is set to "ds2ps.net", correctly to the best of my knowledge
in the frameset and in both frames. Both frames and frameset are loaded
from subdomains of the same domain "ds2ps.net"
Please have a look at this mimimal example:
http://frameset.ds2ps.net/frames-test/frameset.html
Press buttons to get alert with value of a variable defined in the frameset
and in the first frame.
This gives "undefined" in Safari 3.0.4, and give following message in Safari
JavaScript console:
Unsafe JavaScript attempt to access frame with URL http://frameset.ds2ps.net/frames-test/frameset.html from frame with URL http://frame2.ds2ps.net/frames-test/frame2.html. Domains, protocols and ports must match.
Works ok in all other browsers and in earlier versions of Safari.
Apperently, I'm doing something incorrectly.
I would appreciate if Apple Safari developers have a look at this problem and suggest solution.
My company is developing web application which depends on cross-frame scripting,
and we would like to continue supporting Safari browser.
Thank you,
JohnThank you, iBod,
We've submitted this bug at http://bugs.webkit.org
Bug 16444: Cross-frame scripting not working in Safari 3.0.4 despite proper document.domain set in all frames
Thank you for your suggestion! -
I can't get the original disk to work on a reinstall. I get the message
AdobeColorCommonSetRGB
Error:
Error 2.
I teach a class using this program on Macintosh computers running 10.9.5 and the action script is not working. It will work on any program designed using the 10.8 but if you design any animation on 10.9.5 the action script will not work for the buttonsYou would have to manually delete the color profiles in question... Run the cleaner tool and see if it gets you started.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium -
XML create script is not working in Photoshop.
Hi All
Below i have mentioned script is not working. Kindly check and advice. Please do this needful
#target photoshop;
var createDefaultXML, createPresetChild, defaultXML, initDDL, presetFile, presetNamesArray, readXML, resPath, win, windowResource, writeXML, xmlData,
__indexOf = [].indexOf || function(item) { for (var i = 0, l = this.length; i < l; i++) { if (i in this && this[i] === item) return i; } return -1; };
windowResource = "dialog { \
orientation: 'column', \
alignChildren: ['fill', 'top'], \
size:[410, 210], \
text: 'DropDownList Demo - www.davidebarranca.com', \
margins:15, \
controlsPanel: Panel { \
orientation: 'column', \
alignChildren:'right', \
margins:15, \
text: 'Controls', \
controlsGroup: Group { \
orientation: 'row', \
alignChildren:'center', \
st: StaticText { text: 'Amount:' }, \
mySlider: Slider { minvalue:0, maxvalue:500, value:300, size:[220,20] }, \
myText: EditText { text:'300', characters:5, justify:'left'} \
presetsPanel: Panel { \
orientation: 'row', \
alignChildren: 'center', \
text: 'Presets', \
margins: 14, \
presetList: DropDownList {preferredSize: [163,20] }, \
saveNewPreset: Button { text: 'New', preferredSize: [44,24]}, \
deletePreset: Button { text: 'Remove', preferredSize: [60,24]}, \
resetPresets: Button { text: 'Reset', preferredSize: [50,24]} \
buttonsGroup: Group{\
alignChildren: 'bottom',\
cancelButton: Button { text: 'Cancel', properties:{name:'cancel'},size: [60,24], alignment:['right', 'center'] }, \
applyButton: Button { text: 'Apply', properties:{name:'apply'}, size: [100,24], alignment:['right', 'center'] }, \
win = new Window(windowResource);
xmlData = null;
presetNamesArray = [];
resPath = File($.fileName).parent;
presetFile = new File("" + resPath + "/presets.xml");
defaultXML = <presets>
<preset default="true">
<name>select...</name>
<value></value>
</preset>
<preset default="true">
<name>Default value</name>
<value>100</value>
</preset>
<preset default="true">
<name>Low value</name>
<value>10</value>
</preset>
<preset default="true">
<name>High value</name>
<value>400</value>
</preset>
</presets>;
writeXML = function(xml, file) {
if (file == null) {
file = presetFile;
try {
file.open("w");
file.write(xml);
file.close();
} catch (e) {
alert("" + e.message + "\nThere are problems writing the XML file!");
return true;
readXML = function(file) {
var content;
if (file == null) {
file = presetFile;
try {
file.open('r');
content = file.read();
file.close();
return new XML(content);
} catch (e) {
alert("" + e.message + "\nThere are problems reading the XML file!");
return true;
createDefaultXML = function() {
if (!presetFile.exists) {
writeXML(defaultXML);
void 0;
} else {
presetFile.remove();
createDefaultXML();
return true;
createPresetChild = function(name, value) {
var child;
return child = <preset default="false">
<name>{name}</name>
<value>{value}</value>
</preset>;
initDDL = function() {
var i, nameListLength;
if (!presetFile.exists) {
createDefaultXML();
initDDL();
xmlData = readXML();
if (win.presetsPanel.presetList.items.length !== 0) {
win.presetsPanel.presetList.removeAll();
nameListLength = xmlData.preset.name.length();
presetNamesArray.length = 0;
i = 0;
while (i < nameListLength) {
presetNamesArray.push(xmlData.preset.name[i].toString());
win.presetsPanel.presetList.add("item", xmlData.preset.name[i]);
i++;
win.presetsPanel.presetList.selection = win.presetsPanel.presetList.items[0];
return true;
win.controlsPanel.controlsGroup.myText.onChange = function() {
return this.parent.mySlider.value = Number(this.text);
win.controlsPanel.controlsGroup.mySlider.onChange = function() {
return this.parent.myText.text = Math.ceil(this.value);
win.presetsPanel.presetList.onChange = function() {
if (this.selection !== null && this.selection.index !== 0) {
win.controlsPanel.controlsGroup.myText.text = xmlData.preset[this.selection.index].value;
win.controlsPanel.controlsGroup.mySlider.value = Number(xmlData.preset[this.selection.index].value);
return true;
win.presetsPanel.resetPresets.onClick = function() {
if (confirm("Warning\nAre you sure you want to reset the Preset list?", true)) {
createDefaultXML();
return initDDL();
win.presetsPanel.saveNewPreset.onClick = function() {
var child, presetName;
presetName = prompt("Give your preset a name!\nYou'll find it in the preset list.", "User Preset", "Save new Preset");
if (presetName == null) {
return;
if (__indexOf.call(presetNamesArray, presetName) >= 0) {
alert("Duplicate name!\nPlease find another one.");
win.presetsPanel.saveNewPreset.onClick.call();
child = createPresetChild(presetName, win.controlsPanel.controlsGroup.myText.text);
xmlData.appendChild(child);
writeXML(xmlData);
initDDL();
return win.presetsPanel.presetList.selection = win.presetsPanel.presetList.items[win.presetsPanel.presetList.items.length - 1];
win.presetsPanel.deletePreset.onClick = function() {
if (xmlData.preset[win.presetsPanel.presetList.selection.index][email protected]() === "true") {
alert("Can't delete \"" + xmlData.preset[win.presetsPanel.presetList.selection.index].name + "\"\nIt's part of the default set of Presets");
return;
if (confirm("Are you sure you want to delete \"" + xmlData.preset[win.presetsPanel.presetList.selection.index].name + "\" preset?\nYou can't undo this.")) {
delete xmlData.preset[win.presetsPanel.presetList.selection.index];
writeXML(xmlData);
return initDDL();
initDDL();
win.show();You should use the scripting forum. I only hack at Photoshop scripting when I need to. What I put together is usually made from code I find on the web and modify to do what I want to do. When it come down to it I really don't know javascript. Your javascript knowledge is way beyond mine. To tell the truth I don'e even understand the syntax of you first statment after target Photoshop.
I have a programming background but most of mine was was in design, debugging, and developing programming development tools. I retired back in 2002. I never got into Object orientated programming though it was in full swing as was C programming along with java. Microsoft had given up on its object orientate desktop OS2 system sidetracking IBM with it.
I did not look closely at your code. That something you should do. You know more then I do.....
In the scripting forum you will get better help then I can give you. Many of the better scriptwriter seem to have left there becase of frustration with Adobe support. However there are some that still visit there regularly.
You may want to look into Xtools there open source and the author still visits the forum from time to time. I have use some of his scripts but have never gotten into his library I'm retired I only play a little to keep some brain function. ps-scripts - Browse /xtools at SourceForge.net -
Java script is not working in custom tabular form
hai all,
i have changed my built in tabular form to custom tabular form.my java script is coding working fine in built in tabular form . But in my custom tabular form java script is not working ,since it is created as standard report(Display As).
pls help me.
with thanks and regards
sivakumar.GIs the appostrophe function test(pthis) *'* present in your javascript code...
If not can you post the same in apex.oracle.com and give the credential so that I can the why its not wroking
Regards,
Shijesh -
how to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.
Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.
-
Scroll bar on editor not working
I recently upgraded to phtoshop elments 11.0 to 13.0
In the editor mode I cannot use the scroll bar. The scroll bar works fine in the orgnizaer mode. I have tried three different mouses and there is no difference.
Tom Fitch, San Antonio TexasI am using Windows 7 Professional
In the organizer portion the scroll bar moves. When I put my mouse or
arrow on the scroll bar and drag it then of course I move through the different
rows of folders or rows of pictures once in the photo bin.
It was doing it with Photoshop Elements 11.0 and I thought 13.0 might fix
the problem and the scroll bar did move on the first try but not since then.
When I try and load the photo bin and I am choosing the right folder to
load the scroll bar just does not move. I can select the right folder by
using my up and down arrow or the page up and down and then click on the right
folder and then it loads.
Once I get the right folder of pictures loaded and once I finish the first
row of pictures I cannot use my mouse and arrow to drag the scroll bar
down to get to the next row of pictures. I can place my arrow on my mouse
below the scroll bar and got to the next row but I usually get only half the
picture and sometimes only 1/4 of it but I can usually get it loaded up and
edit the pictures and move on the next picture but it is very slow and
frustrating.
Any help would be appreciated.
I protested to an adobe supervisor and I got an e-mail and somebody is
supposed to call me tomorrow so hopefully then can log on to my computer and
see what I am talking about.
Sound like something got corruped in the editor mode only. I tried 3
different mouses and even the computer mouse and no difference.
Tom Fitch
In a message dated 12/17/2014 5:05:37 P.M. Central Standard Time,
[email protected] writes:
scroll bar on editor not working
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7024909#7024909) -
Hi,
SAP Graphical editor not working. I am getting the following error.
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
Please advise...
Regards
Rajesh.Hi Rajesh,
It looks to be RFC connection issue.
Refer to various solutions described in below SAP note
101971 - 37527 Graphical full screen is not available (RFC)
Alternative
Workaround
You can prevent the termination of the RFC connection by increasing the value of the timeout parameter for the relevant RFC destination. Call transaction SM59, choose the TCP/IP connection "EU_SCRP_WN32" and branch to the "Special Options" tab page. In the section "Keep-Alive-Timeout" select the option "Specify Timeout" and enter a longer wait time (for example, 300 seconds). Undo this change once you use the corrected program version.
Hope this helps.
Regards,
Deepak Kori -
PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ
Thanks for the quick response ...
I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ... -
Has anyone experienced Editor not working - and got an answer from Adobe?
Try this DNS ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch Safari to test.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information.
Maybe you are looking for
-
SAFARI crashed after installing Yosemite-HELP!!
I have macbook air 11 inch bought 2 months ago. Everything was working well until I decided to upgrade to Yosemite- The download took forever so I went to sleep and opened the laptop today. Safari was not opening some websites (msn.com or yahoo.com)
-
ive got a laptop from a friend, she cleared everything off it. ive downloaded itunes and for some reason all her music has appeared in the library. How do i delete her music from the itunes libary so i can add my own music?
-
Trouble opening Photoshop from Creative Cloud!
I have logged in on mye Creative Cloud, my Photoshop is installed and up to date, but every time I try to open it - nothing happens. It is installed on my desktop on my MacBook Pro. How do I solve this?
-
MBPro won't read SL DVD - can I copy the install DVD on a PC?
My MacBook Pro won't read the SL install DVD (as others have had problems with). I have access to a PC with DVD to DVD copy ability. My question is, can I burn a copy of the install DVD to another DVD and use that copy (assuming my MB will be able to
-
Just updated iphone now majority of music wont play through ipod
is there any way i can sort this issue i am having with the majority of my music not working on my iphone?