UCCX scripting, Voicemail?

I'm creating a new UCCX script and I have a question regarding voicemail fwd when no
agents are available. I know that I need to add the 'Get Reporting' stat before the menu,
but I'm not sure where to place it. Also, I wanted to make sure that I wouldn't be using
to many uccx ports. I have attached the script . I will appreciate if someone can edit it for me.

mislam2
I place my get reporting step right before a caller would go to the queue. If not agents are available or the average queue time is too high I set a transfer string variable and send the caller to the voice mail box.
You should not have to worry about using too many ports. Once the caller is transferred the uccx port is done with the call.
HTH

Similar Messages

UCCX Scripting - Queueing

Hi,
I'm new to UCCX Scripting. I have a script that waits for the next available agent. If no agent is available, the user hears a prompt that says, "Thank you for holding...please press 1 to leave a voicemail or continue to hold." The user hears Music On Hold for 30 seconds, and it reloops. But while the user is hearing the moh, if the user presses 1, nothing happens. I want the user to be able to press 1 at anytime to go straight to voicemail especially during the Music On Hold. Here's how my script looks:
Label: queueloop
Menu - play prompt that says, "Thank you for holding...please press 1 for voicemail"
     Go to voicemail - if 1 is pressed
     Timeout - (default)
     Unsuccessful - (default)
Call Hold
Delay - 30 seconds
Call Unhold
-Go to queueloop
Any ideas????

Thanks phampson for your reply. I removed the MOH and took my 3:30 music on hold wave file and split it into seven 30 second clips and then uploaded them to the Call Center. Then I completely modified the script where during the first MOH the user hears the first 30 second clip using the MENU function in the CCX Editor , then it hears a prompt saying, "thank you for holding...please wait for the next available agent.", and then it plays the second 30 second clip, and so on and so forth.
This allowed me to press 1 at anytime to go directly to the voicemail - I used the Menu function for each 30 second clip.

UCCX Scripting - Open/Close time of day is different on some days

All,
I currently have a simple UCCX script with a DOW and TOD variable set, but need to make an adjustment to accommodate a new schedule for a call center queue. My DOW is Monday - Friday, and TOD is set to 8am-5pm. I need to make a change to where say Wednesday is set to not close the queue until 10pm. How do I make that happen?
This is the way it shows in the editor:
DOW: Monday-Friday
+open:
++8am-5pm:
+++Goto yadayada
++TheRest
+Closed
If I need Wednesday's queue to stay open between the hours of 8am and 10pm, what logic do I need to put in? I'm thinking I'll have to add an IF Statement, but not sure where to start. Any ideas?

I was able to figure this out. Below is what I did:
Created two new Day of Week options and selected the corresponding days. Under each, I moved the Time of Day statement and assigned the time ranges, then selected the goto statement and assigned it as needed per my script.
This should provide the logic I was needed.

How to update XML file through UCCX script ?

Hi,
I have an UCCX script with MENU step. One of the step is for technical support team. When caller chose this step, information about date and time of the call and calling number should be recorded on a XML file located on the web server.
This XML is uploaded into the web server , but I don't know how to update it through UCCX script.
Here is how the XML file looks like:
<?xml version="1.0" ?>
<rss version="2.0">
<channel>
<title>CALL LOG</title>
<link></link>
<description>Support Call log</description>
<ttl>1</ttl>
<item>
<title>2011-08-24 14:56:39 - 00044 123 123 123</title>
<link></link>
<description></description>
</item
</channel>
</rss>
Any idea?
Thanks,
O

Hi
The 'keyword transform' step uses the template XML file to generate the actual XML file you want to post... the template would be a plain text file uploaded to the repository, and would look like so:
<?xml version="1.0" ?>
CALL LOG
Support Call log
1
%%calldatetime%% - %%clinumber%%
Now - if you had that bit of XML, with correct time/number in it - have you verified know that you can definately just post that XML to a certain URL to get it on the server? Check with whoever manages that server exactly what you need to do to get it to appear - then worry about how you do that from UCCX. It may not be a matter of posting up that XML, you may need it in a different format or something..
Aaron

UCCX script editor not working

1-The loading bar down of the screen always loading and never finishes.Please take a look to the attached picture.
2-When i go to the uccx and want to change the server from hostname to ip address,i always get update failed.
I am so new in uccx,help is appreciated.
Thanks in advance.

Hello,
You have come to the right place to ask questions on UCCX.
Please take some time to read through the product manuals, as they are full of good information and will answer most of your questions.
UCCX Documentation Home Page
http://www.cisco.com/en/US/customer/products/sw/custcosw/ps1846/tsd_products_support_series_home.html
On to your two questions:
1. This is not a loading bar. This bar is completely useless, and all it's telling you is how much memory the Editor has available to it in order to process things. The button to the right is simply a "garbage collector" which will attempt to free up any abandoned memory, but mostly it just sits there looking pretty. You really don't need to bother with either of these too status bar items, and can ignore them.
Source: UCCX Scripting Volume 1 - Getting Started with Scripts
2. It's been about two years since I've completed an install of UCCX, and therefore don't have this information fresh in my head. I did spend few minutes trying to find documentation on the topic, but to no avail. I was only really able to read the Help page for that specific page (Help > For This Page), however, it didn't make a big deal about changing the value. It simply says, change it and then click Save.
Could you post the exact error message you are receiving? Also, what is your intention with changing the hostname to IP? Unlike CUCM where you may want to remove DNS dependency on the phones to communicate with the server, UCCX clients use the IP address regardless. So perhaps it's not a necessary step?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

DB Read error from UCCX Script

Hi All,
We are running uccx 7.0.
Trying to return data from DB using stored procedure from the uccx script.
We are able to run this when we pass explicit value instead of variable ANI.
But whenever we provide variable ANI, we get below
error: SQL statement varible not defined : ANI
Query which provided in the DB Read as below,
select * from table(credit_back.fun_select_point($ANI));
Request your help on it..
Regards,
Shalid K.C

Yes Gergely.
we have created new script and when i add DB Read function in the script, it is not allow to apply it, same time it is giveing the above mentioned error.
but when i test it with explicite value it is working.. .not working by providing variable name
Regards,
Shalid

How to see programming Code for UCCX Script

Hi All,
How can I see the programming Code for UCCX Script? I have a script and want to see its Code , something like :
int sum = 0;
boolean alternate = false;
boolean isValid = false;
try {
int i = 0;
for (i = ccnumber.length() - 1; i >= 0; i--) {
int n = Integer.parseInt(ccnumber.substring(i, i + 1));
if (alternate) {
   n = n * 2;
   if (n > 9) {
    n = (n % 10) + 1;
sum += n;
alternate = !alternate;
isValid = (sum % 10 == 0);
} catch (Exception e) {
return -1;
return (isValid == true ? 1 : 0);
thanks,
Hamed

You're not going to find code per se, unless you have some java class you wrote and then you would only see the code if you had the source java file. The script is the only interface you get for "code".
david

UCCX script and abandoned calls

Hi Guys
I got question about that UCCX script and abandoned calls , so currently we had 4 different script for support the call follow .
So the Main script is just AA let the people select menu 1 , 2 ,3 then go to different queue , after select 1 (for example) then call-direct to second script trigger number and coming into the queue .
Unfortunately , the system counter the action to be an Abandoned call , I already open the case about this issue and the TAC did not found any configure issue on UCCX , from the log we can seem all the REDIRECT,lrd=5000 is abandoned call .
23811205: Apr 28 13:01:44.257 GMT+800 %MIVR-SS_TEL-7-UNK:Call.received() JTAPICallContact[id=37148,implId=151183/1,state=STATE_RECEIVED_IDX,inbound=true,App name=APP0,task=null,session=null,seq num=-1,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=null
23811420: Apr 28 13:02:00.491 GMT+800 %MIVR-SS_TEL-7-UNK:Call.transferring(5030) JTAPICallContact[id=37148,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=APP0,task=48000040709,session=36000027315,seq num=0,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=5007]
23811424: Apr 28 13:02:00.491 GMT+800 %MIVR-SS_TEL-7-UNK:Call.abandoned() - transferring JTAPICallContact[id=37148,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=APP0,task=48000040709,session=36000027315,seq num=0,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=5007]
23818414: Apr 28 13:09:46.095 GMT+800 %MIVR-SS_TEL-7-UNK:Call.transferring(239) JTAPICallContact[id=37149,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=app2_Admin,task=48000040710,session=null,seq num=-1,cn=5030,dn=5030,cgn=0405554590,ani=null,dnis=null,clid=null,atype=REDIRECT,lrd=5000,ocn=5000,route=RP[num=5030],TP=5034]
23818421: Apr 28 13:09:46.095 GMT+800 %MIVR-SS_TEL-7-UNK:Call.abandoned() - transferring JTAPICallContact[id=37149,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=app2_Admin,task=48000040710,session=null,seq num=-1,cn=5030,dn=5030,cgn=0405554590,ani=null,dnis=null,clid=null,atype=REDIRECT,lrd=5000,ocn=5000,route=RP[num=5030],TP=5034]
Please give some advice about that and I am look forward to heard from you guys soon .
Thanks

Hi Jon
I was tested "Set Call Contact Info step to mark the call as handled" last night , but not working .
so in the get call contact info properties , I was used last Redirect number to nest trigger number .
but not working .
so have got any idea about that ?
thanks

How to setup a whisper prompt in UCCX Script?

Guys
I need some help here.
We have a cisco UCCX setup which was designed and implemented by a vendor. They had the script written. I want to modify that to have a whisper prompt for the agents to hear something before they start their talk.
Is there something that anyone can guide me to tell me what actually has to be done on a script to input this whisper message. I have a prompt for that. But don't know where and what to start with.
Any help is much appreciated.

@Gergely : For your first question, the answer it yes. The agent should hear that recording before he does go the customer call.
But the second note what you sent, I don't think that is correct. Because UCCX script supports that. I have pasted a sample below which a whisper prompt works in one of our UCCX script. See below.
Correct me If I am wrong.

Webservice call on UCCX Script

Hi,
Anybody has idea how to call web service on UCCX script editor.
I read i have to built custom java code and import it into UCCX. Can anybody support how to use it.

Hi,
that's one way but there are several other options as well:
- using embedded Java code in your script (no custom file),
- creating the necessary Java classes with wsimport and referencing them in the script.
Please note you need at least IP IVR or UCCX Premium to make this work.
You should probably read the configuration guide about administering custom classes.
G.

Working with TimeZone variables in UCCx script

Hi Team
I'm wondering if you guys could help me to find out the best way to work with TZ variables in UCCx script.
Because of different countries customer has a branches, I need to setup different TimeZones for each country handled by the same centralized UCCx.
In this post they use Java to work with TZ, however, but I prefer another way to work with TZ variables:
https://supportforums.cisco.com/discussion/11851751/how-make-uccx-holiday-script-timezone-aware
My idea is to work with Time Zone variables in the script, so what I did was to create different TZ variables and each one of the them assigned the proper timezone based on the country, so depending of the Trigger involved (DNIS), I can find witch country this call came from and give the right timezone.
The problem I have is that at the time I want to add or subtract two variables of TZ, I got an error because of the syntax. I've been trying different options, but until now, no luck.
Would you mind you guys who had been working on this let me know what is the right syntax to add or subtract TimeZone variables un UCCx?
Thanking you in advance
Martin

Hi
I've been working on TZ's recently... see this post:
https://supportforums.cisco.com/discussion/12474756/how-check-daylight-saving-within-uccx-script
My approach in the scripts was that basically I allow the department to set their opening hours in the timezone of their choice.
They have a management web page served from CCX that accepts start/end times each day, and a timezone. That all gets stored in XML.
In the script, based on that information I get the current time in whatever timezone is set, and compare that to the XML open/close times.
Similarly for holidays, I get the current date/time in the holiday TZ and compare the holidays to that.
Aaron

Procedure of mapping new UCCX script

Hi Guys,
Can you please tell me the procedure of correctly creating a trigger for a UCCX script?
do I need to create a separate call control group all together or I can use existing one?

Hi Shyam,
Make sure before testing a script you have checked below:
1. Unified CTI telephony Subsystem is InService
2. The validation of Script is successful before uploading in script management.
Yes , You can do a reactive script to check if trigger is hitting the script.
Set the reactive script, once you make a call the script will reloaded and you will come to know that the script is triggered.
Step 1: in Script Editor , go to Debug-->Reactive script
Step 2: Select the Script you want to monitor from dropdown and set the timer timer
Step 3: Call the Route point (trigger), the script will reloaded with the red mark. So you can to know the script is triggered.
Step 4: You can debug the script by click step over button to check if any error is there in the script.

"Subroutines" in an UCCX script

My days as a former programmer are showing through. I always preferred structured code. So in that regard, does anyone have a mechanism for creating a pseudo subroutine inside a UCCX script? I realize that I can create a subscript and call it from my original script, but I really don't want to do that for the few lines of code I need to execute.
I have a few lines of code that I need to execute from various points in my script. I'm looking for a mechanism to allow me to "call" that from a point in my script and then return to that point.
I could set a string variable with a value that defines where I'm at within my script, and then use a switch statement based on that string variable with a bunch of goto statements that will return me to the proper point. What would be better is the capability to modify the destination of a goto statement based on the variable. Does anybody have any other suggestions?

Sadly you cannot reference a variable within the Goto step. The way you can do this within the same script is to set a variable, Goto the function, and then check the variable value at the end of the function to decide where to return to. You can use a Match step to evaluate that variable and have a different Goto step within each case.
You may also want to read up on Trigger Application method instead of using subflows. This was a great improvment introduced in CCX5+. My answer to another thread gave a crash-course explaination of why it's better:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Contact%20Center&topicID=.ee6fe12&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd3f333

UCCX script to pull XML data

Hello,
My goal is to create a UCCX script that will run on a Standard license server. Basically, when a user dials a four digit "speed dial", I want them to be translated to a UCCX route point, that will take the original called number, and the calling number, and use that to create a URL that it will then query and retrieve the actual number that will need to be dialed.
So my plan currently is to have a phone inside of a partition that has a translation pattern of XXXX. The called number gets translated to 1158, which is the trigger of the application on UCCX.
The url I want to query will be something like this:
http://localhost:35798/RestServiceImpl.svc/XML/1017/6314
"Localhost" will eventually become the IP address of the server hosting IIS application that will provide the XML output. 1017 is the "speed dial" or the original called number, 6314 is the calling number.
Going to that URL should return me this output:
<XMLDataResponse xmlns="http://tempuri.org/">
<XMLDataResult>
<CallingXML>
<Extension>6300</Extension>
<SpeedDial>1001</SpeedDial>
<PhoneNumber>918005551212</PhoneNumber>
</CallingXML>
</XMLDataResult>
</XMLDataResponse>
This is the script as I have written it out so far:
It does not seem to like what I have put together thus far when I try to validate it. I'm just wondering if I'm doing something that's obviously wrong.
The end goal will be to take the NewNumber and dial it, while hiding it from the phone.
Thanks,
Mark

Here's an update: I have the script retrieving the correct numbers and formulating the URL correctly. It also appears to be delivering the query from the XML.
Here's what the XML looks like when I hit it from my browser:
http://tempuri.org/
">
http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">63141017918003551111
When I do an Interactive Script Debug session and dial the number, I can see that there are two problems: 1) the NewNumber string is "null" by the time it gets to the step to do a Call Consult Transfer, and 2) the script just shows up a blank Exception.
This tells me I am not parsing the XML correctly.
Here is what I have currently:
NewNumber = Get XML Data (xml, "/descendant::XMLDataResponse/child::XMLDataResult/child::PhoneNumber")
Which based upon what I've read in Cisco's Volume 2 and elsewhere, should be correct.
Notice in the screenshot that the XML data that UCCX pulls in looks different from when I look at it from my browser. I've also attached the script.
Thanks,
Mark

Query AD from a UCCX script

Does anyone know how to query Active Directory from a UCCX script? Looking to pull the caller's email field from the ANI.

Hi
You can do this, but it's not so simple. Two options:
1) Create a custom java class to read LDAP and return the info you require
2) Implement a middleware web server that you can call from UCCX, that would take ANI as a parameter and return the email address.
I've done 1) before, or something very similar...
Aaron

UCCX scripting, Voicemail?

Similar Messages

Maybe you are looking for