UCCX Supervisor Desktop Agent team summary

      Supervisor desktop agent team summary report are not showing accurate.  Before restart the server we are facing a Agent logon time its not correct under the supervisor desktop agent page.
After restart that problem is resolved the Agent logon time but its giving another issue.
The issue the Call Preseneted time not accurate.
The running UCCX version is: 8.5.1.11004.25
Attached the snapshot.

What's wrong with the calls presented column? It looks like three of the four people didn't answer one of the calls presented to them which is what that column is supposed to show.

Similar Messages

  • UCCX 8.5 Supervisor desktop agent voice monitor logs

    Is there any logs/reports that can be found to show what calls the supervisor has silient voice monitored when using the silient monitor function from the supervisor desktop agent.

    You'll need to assign the supervisor to a couple teams before you'll see anything in Supervisor desktop.
    You can do this through SubSystems --> RmCm --> Teams. Make sure your user shows up under the assigned section.
    You will need to close (completely) Cisco Agent Desktop and relaunch before you will see the changes.
    HTH
    Regards,
    Tanner Ezell

  • CSD Shows Incorrect Agent Team Summary

    I did an upgrade for a customer for UCCX 8.0.2 to 8.5SU1. After the upgrade, customer noticed that when they look at the Agent Team Summary in Cisco Supervisor Desktop, the stats shown are cummulative of previous days. Example, if today's Wednesday, it shows records from Monday to Wednesday instead of just data for today. Everything else looks okay and all UCCX are "In Service". Supervisor logs don't show anything relating to errors or anything else. Anyone run into this? Just wanted to check with you guys before I open a TAC case and/or apply the SU2 patch.

    Looks like the stats are not resetting at midnight, most likely you are hitting the below defect.
    CSCtr65099 CSD Agent - Team State, State Duration is not sorted properly
    http://www.cisco.com/web/ccbu/CRS/8/5/1/SU2/UCCX_851SU2_ReleaseNotes.pdf, pg 11
    I would suggest you upgrade to Su2 before opening a tac case.
    Shirish.

  • Supervisor Desktop Agent View

    Hi,
    I'm currently running UCCX 8 and have strange issue in Supervisor Desktop with the name display for one of the agents!
    For all the other agents the information keyed into end user (on CUCM8) for the last name, first name fields is showing correctly in desktop. However i have one agent where it is showing a completely different name to what is entered in the end user entry!
    Has anyone any ideas as to where else it could be pulling this information from or why it is displaying incorrecly for one agent yet the other 30 are correct?!
    Thanks

    The other thing to do is to download a free ldap browser (almost everyone uses the same one - version 2.8.2 of Jarek Gawor's application) and connect to the Calabrio LDAP - use port = 38983 and set the BASEDN to  o=Spanlink Communications. It will look like this for an anonymous connection:
    Have a browse through the LDAP until you find your agent. Check what is there - this is the source, and sync will just populate the source from the SQL database. This may shed some light on the problem - why it is not being updated to match the SQL DB.
    For anyone who plays with CAD at a big site, the LDAP browser is essential.
    Regards,
    Geoff

  • Supervisor Desktop, Agents window is very jittery on certain queues

    We have Supervisor Desktop installed on Windows 7.
    On all of the Supervisors, the Agents window in the lower left hand is so jittery (very fast), you cannot make out who the agents are.
    We have two queues and it only happens when a particular queue is selected.
    We have two version of the software and it happens on both of them.
    8.02.400
    8.02.9
    I took some snapshots during the jitter and it looks like one of the agents (also a supervisor) is going away, and another agent is showing up twice.
    This happens so fast you can't see it, it just looks like all of the agents are kind of a blur.
    Has anyone ever seen anything like this?

    Might be a problem with a client firewall on the disappearing agent/sup.. that can disrupt comms so the agent logs in/loses connection/logs in etc ad infinitum.
    Check for Windows Firewall or any third party sutff and turn it off.
    Also check the desktop chat service logs on the UCCX server to see if there are lots of errors for any particular agent.
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • Supervisor desktop agent.

    On the supervisor desktop 6.6.1 premium  is there a way to add a column calls waiting?

    You cannot add columns but you can hide them in the Preferences window.
    This already exists in the Oldest Contact column. The first number is the contacts waiting, the second number is the amount of time the longest contact has been waiting. E.g: 5 [00:08:00] indicates five contacts are waiting and the longest wait is eight minutes.

  • UCCX Supervisor Desktop Workflows

    Hello all
    We use a number of workflows within the supervisor desktop such as 'Message box action', ' Report action' etc…
    For some reason they have all stopped working across the entire platform. We have tried setting them up again, and carried out an engine restart and database subsystem restart to no avail.
    Has anyone experienced this problem or is aware of a fix?
    Many thanks
    Rob
    Unified Contact Cente Express 8.0.2.11005-20
    CSD Build: 8.0.2.500

    It looks like we're suffereing from the same thing. Does anyone know if there's a fix for this? We're currently running 8.5(1)SU3, HA.
    This has affected several CSD installations simultaneously and no combination of re-installs or client re-boots seems to fix it.

  • UCCX Supervisor Desktop Logon Time

    I have problems with the Logon time in Agents staticswhich is not updated.
    If the agent is disconnected and then connected again, the Logon time not updatedand displays the time from the first connection

    What's wrong with the calls presented column? It looks like three of the four people didn't answer one of the calls presented to them which is what that column is supposed to show.

  • Cisco Supervisor user isnt under Agent's Team Summary

                       I am using Cisco Supervisor and Agent Robin Dean is under Agent Team State but she is not under Agent-Team Summary. Does anyone know how to get her in there? We are using UCCX 8.0.2.

    There have been quite a few bugs over the years with agents not showing or disappearing from the supervisors desktop.
    Make sure you have the latest SU installed, I think SU4 for 8.0(2)
    Graham

  • CAD Agent blinks in and out of Supervisor Desktop

    Got a problem that started yesterday. Running UCCX 7.0(1)sr5 and I've got this agent that comes and goes from the supervisors desktops. Cadence is about every 2 seconds she appears then disappears.
    Any ideas?
    Thanks in advance.

    Hi Cbelcher,
    Problem
    Cisco Agent Desktop agent appears and disappears from the Cisco Supervisor Desktop.
    Intermittently Agent begins to disappear and appear on the Supervisor Desktop under Team Agent state Report.
    Solution
    This problem is caused when multiple threads do not exit correctly  under Agent desktop PC. When the CHAT communication on TCP Port 59000  and 59020 between Client and Server has been lost due to network  interruption/outage. CAD is unable to recover from this and creates  multiple Agent.exe instances.
    Exit out affected Cisco Agent Desktop application and launch CAD again.
    Reference:
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
    Hope it helps.
    Anand
    Please rate helpful posts by clicking on the stars below the right answer !!

  • Historical reports not matching supervisor desktop "Calls Presented" totals.

    Have UCCX 9.X version of Supervisor Desktop.  When viewing the “Agents – Team Summary” from within Supervisor Desktop the “Calls Presented” and “Calls Handed” totals seem to be cumulative from more than the past day.  The Supervisor Desktop User’s guide states that the totals should be from 12:00 AM thru the current day.  I’ve looked through Supervisor Desktop “Preferences” and could not find anything to change to give the past days totals only.   When a supervisor runs a Historical Report for the day the totals are correct. When they’re in Supervisor Desktop the totals for each agent are hundreds more than what the Historical Report states.   Is there a parameter I’m missing somewhere to allow Supervisor Desktop to give the current days totals only?
    Thanks!

    We started having this problem with some of the reps after migrating from the old CAD servers to new CAD servers. Since the new system didn’t have the updated RASCAL DB, I thought the reports have the stale data. I was under the impression that it gets cleared after a day(once CSD has a fresh data) but seems like that’s not the case. I didn’t get time to look into this further and have requested TAC to help me on this.
    -Sunil

  • UCCX 10.5 - Finesse Supervisors see all teams, queues, agents, etc

    This is a new build using 10.5 and Finesse.  Every supervisor is able to see every UCCX agent, queue, etc. even though they're in no way associated with them.
    Each team has one supervisor and one queue.  Only the agents that are on that team have that skill assigned to them.  
    But for some reason, when (for example) the Customer Service supervisor signs in she can see not only her own team, queue, etc. but also every member and the queue for IT and Payments.  The payments supervisor can see everything for IT and Customer Service.   The Customer Service supervisor can see everything for IT and Payments, etc.  
    Have I missed a step?  I assumed supervisors could only see real-time stats for their team's agents and queues.  

    I just tried editing the reports that are displayed for the specific teams with no luck (as of yet).... For instance, I made a copy of the "Team Summary Report" (that is displayed on the "Team Data" tab), and filtered it for only one of the teams. I took that report id from the views (in CUIC) and applied it to that specific team's Desktop view (in cfadmin).... And I'm not sure if the view didnt work because it takes a while for this to update (15-30 minutes), and restarting the Tomcat Services is not an option right now, or if this is a result of the LiveDataGadget.jsp coding.
    Will let you know if this ends up working.

  • User is in team state but not in team summary - Cisco supervisor desktop

    We have Cisco supervisor desktop where supervisor can see user in team state but not in team summary?? Any clue why is could be happening??
    Any help is much appreciated
    Thanks!

    Hi David,
    Not sure of setting an alert but Supervisor can use "Table 17. Summary display data"
    Agents Not Ready : The number of agents in this CSQ who are currently in the Not Ready state.
    And "Table 12. Team Summary display data (cont’d)"
    Max Not Ready : The longest time the agent spent in the Not Ready state today.
    And also refer the section "Creating Supervisor Work Flows"
    Using the Supervisor Work Flow Administrator feature, you can configure your desktop to perform certain actions based on queue statistics for calls waiting and calls in queue for specified skill groups.
    Refer the below link for more information on this.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/csd85ccxug-cm.pdf
    Hope it helps.
    Anand
    Pls rate helpful posts !!

  • Cisco Supervisor Desktop show "Agent Logs - call" and "Agent Logs - state" in N/A ::: UCCX 8.5.1

    Hi team.
    The Cisco Supervisor Desktop don't show any logs in the "Agent Logs - State" and "Agent Logs - Call" in some agents.
    I restarted the Cisco Desktop Services in CCX Serviceability but the issue continue.
    I appreciate any help respect this case.
    Thanks a lot.
    ErnestoG

    Hi Ernesto,
    Did you click or selct the Specific Agent\Inbound call which is currently being handled by the Agent. From the Screenshot you have attached (first one) doesn't look like the call has been selected.
    Please select or click on that Specific Agent\Inbound call from CSD and check these values.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • UCCX numbers off on Agent desktop and CTIOS supervisor desktop

    Hello,
    We have a big problem with the numbers displaying on are agent desktops as well as as the CTIOS supervisor desktops the numbers are off, such as the number of call recieved at the end of the day, etc.  It seems like at certain times of the day the numbers reset back to zero and the number of calls received by an agent through the whole day are smaller than they should.  Can you please help us.
    Thanks.

    Thanks. So you are looking at real-time reports.
    1. Is this an issue with all agents or only few ?
    2. What OS they are running ?
    3. Try installing CAD on Win XP or Win 7 32-bit to see if the behavior is same ? I wouldnt recommend reinstalling CAD on their existing boxes, as few registry settings might not be removed completely & will show the same behavior. Therefore, grab a new machine with above mentioned OS & do a fresh install on it to see if it helps.
    4. Were there any OS patch upgrades taken place recently on agent machines ?
    GP.

Maybe you are looking for