UCCX "The ID you entered was not found"

       I wanted to know can someone tell me how do I add a user to be able to log into the supervior desktop software.
       He can log into the agent software fine but I was told that I need to add the user to the supervisors group. I've never
       done that before and I wanted to know if someone could give me a some guideance on the matter.Thanks in advanc
       and have a great day.

Hi,
You can also try out the steps mentioned in these documents for the same error message:
Agent Unable to Log Into Cisco Agent Desktop
"Error While Handling The Input Request" Error Message When Configuring CRS
Check it out.

Similar Messages

When Logging in the user gets "The ID you entered was not found"

I have UCCX v8. All users can log in fine. However, I have created a new user and they are getting "The ID you entered was not found".
1. The user was created in CUCM, extension made available to UCCX, and device associated to RMuser account
2. The user shows up in resoureces and I can assign them to a queue
3. The User shows up in Tools/User Management/User List
4. You can assign the user to a Team
5. The User DOES NOT show up in the Supervisor
I have tried unassociating and re associating the user's device with the RM User account.
I have tried restarting the User Desktop Synchronisation Service.
I have deleted the User acount and recreated it
I have reset the passsword
When the user was deleted they showed up under inactive users in UCCX. I deleted the user from here, recreated the user in CUCM, and the new user showed un in resources. This suggests that synchonisation is workinhg.
Anyone have any other ideas that I can try?

You are not mentioned where you are trying to login is that CAD or Cisco supervisor desktop.
I also got the same error while I tried to login as Supervisor but the same time I am able to login CAD without any issue.
When I checked the user in UCCX it's not added as Supervisor so once I did I am able to login
I did this in UCCX 8.0.2
Hope this will help

This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It's possible that the webpage is temporarily unavailable. Alternatively, the website might have changed or removed the

This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It's possible that the webpage is temporarily unavailable. Alternatively, the website might
have changed or removed the webpage.
For more information about HTTP errors, see Help.

check this
http://social.msdn.microsoft.com/Forums/en-US/5576aba1-d196-42ce-bd62-ad5ddfa3a8fd/this-error-http-404-not-found-means-that-internet-explorer-was-able-to-connect-to-the-website-but?forum=sharepointgeneralprevious

HP Officejet Pro 8500 A909G – The HP Imaging Device was not found

I have a HP Officejet Pro 8500 Wireless A909G. My operating system is Windows 7 Home Premium 64bit that was upgraded from the original Windows Vista 64bit that came installed on my HP Pavilion Elite m9400t CTO Desktop PC.
After performing the Windows 7 upgrade I installed OJP8500vA909_Full_13 to support the 8500, and everything worked fine.
I recently noticed that the scanner function had stopped working from Solution Center, and uninstalled V13. I downloaded and installed OJP8500vA909_Full_14. The install completes without error, but then I get scanner error “The HP imaging device was not found” with extended error code 8, [(1,0, -2147221164)].
I have performed all the suggested Solution Center steps to resolve the error without success. Including:
1) Updated the firmware to OfficejetPro8500A909g_R1006B_ENG
2) Ran OJP8500vA909_Corporate_Scrubber_14
3) Uninstalled all programs, deleted %temp% files, and changed the startup using MSCONFIG.
4) Deleted all other imaging programs including camera software, and reinstalled.
5) Performed HP Update and installed network fix.
I have performed these steps many times and keep getting the same error. The scanner works using the front panel function “Scan to network folder.
Please help.
This question was solved.
View Solution.

First of all, i am sorry to hear your having a problem with your Scanning Feature on your PC. How is the computer and printer connected together?
Please download and run the following tool. This is what we call the HP Scan Diagnostic Utility. After downloading and running the tool, can i have you reply with the problems (if any) it finds. Thanks so much!
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96509-1&cc=us&dlc=en&lc=en&...=
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an HP Employee.

"The disk you inserted was not readable by this computer" on NTFS ext HDD

I have spent hours trying to find a solution to this problem, but alas - nothing really useful came up. Therefore I now turn to you, Discussions - you're my only hope!
And to the case:
I just got a brand new shiny and aluminiy MacBook Pro a couple of weeks back, and since my last laptop was a PC, I have been very content ever since switching.
However, this week I bought a new Lacie 2TB external HDD (also shiny) and backed up a lot of stuff from my Windows days.
I partitioned it in Windows and made two NTFS partitions (approx. 1.8TB + 200GB). It was not an option for me to partition it to HFS, as I need it to exchange files between my Mac (using ntfs-3g) and my (and other) Windows computers (and a lot of files exceed the FAT32 file size limit).
Unfortunately when I connect to my MacBook Pro (and my old 2005 PowerMac G5) it gives me the "The disk you inserted was not readable by this computer", and I am not able to verify nor repair it in Disk Utility. It doesn't even show the partitions correctly, it only weirdly enough shows a 3 megabyte partition and 329.70 megabytes of free space.
It still, however, works fine on my Windows computers. I also have the 1TB version of the same Lacie HDD also with two NTFS formatted partitions, and that drive shows up nicely on my MBP.
Does anyone know how/have an idea on how/have a magic potion to fix this?
- I have run chkdisk on it on my Windows comp and it showed no errors.
- I have also tried booting Snow Leopard in 32bit kernel mode (as someone presumably had that help earlier) but with no luck.
- I've connected it both via USB and FW. Same problem.
- I've installed and later uninstalled NTFS-3g and MacFuse - no change.
- And as mentioned I've connected it to my PowerMac G5 (w. Leopard), that also couldn't read it properly.
It is not an option for me to reformat it right now, as I have nowhere to back up that drive (and buying another new external drive is out of the question, as I semi-accidentally spent all my money on the new MBP ).
Anyone helping me solve this issue will receive 10 units of my deepest gratitudes (and maybe a couple of muffins, should the person drop by some time).
Thanks in advance.

Well it seems to work somewhat now, after some playing around.
And here's what I did:
- I downloaded the bootable System Rescue CD
- I booted it up from my PC. And entered the TestDisk utility, where I resaved the partition table (even though it already showed up fine). (If you don't have an extra PC to boot from, the TestDisk utility can also be installed on Mac OS, I just don't have the skills to do that).
- Tadaa! Now I was able to read the disk and its two partitions (one NTFS and one exFAT) on my MacBook! But... When I plugged the external drive into my PC again it didn't show up anything, and in the disk manager, it detected the drive structure as being all unallocated space.
Upon plugging it into my Mac again, it once again showed my old fiend, the "The disk you inserted was not readable by this computer" error. Sigh.
- So once again I booted up the System Rescue CD and TestDisk, and rewrote the partition structure. One weird thing was, that TestDisk this time detected the disk as being mac formatted, so I had to manually select the "Intel/PC" structure option. After rewriting the structure the disk once again it showed up nicely on my Windows PC.
- Before plugging it back into my Mac, I decided to try and install MacFuse and NTFS-3g.
- Since MacFuse doesn't apparently support the 64-bit kernel mode, I booted up my MBP in forced 32-bit kernel mode and voila - I could now read (and write) to my NTFS disk and connect it to my PC and back, without it messing up again.
I won't mark this issue as solved just yet, as I will need to see if it lasts. Also it's not really a lasting solution to be forced to boot into 32-bit mode, so I'll have to see if there's another way at some point.
Message was edited by: Nilfisken

I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
Problem:
You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
You get a couple of error messages, which you click through.
You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
Solution:
BEFORE you restart, and with the installer package still open -
1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
Applications : Canon Utilities
Applications : Canoscan Toolbox
and remove the prefix Into_ from each folder
2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
Library : CFMSupport
and if it didn't, move it there yourself
THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

"The disk you inserted was not readable by this computer" 10.9.3 - WD-500GB WD5000AADS

Mac Book Pro
MAC OS Extended(Journaled)
Capacity:97GB
Version-10.9.3
Hello Mac Fam,
I recently purchased a HD-Enclosure (Insignia 3.0 desktop hard disk enclosure),since my WD 500Gig Hard Drive broke(power cable broke). Before the Hard Drive broke, it worked perfectly on my Mac Book Pro (Read/Write). I was extremely excited when i purchased the HD Enclosure since i thought that it would work perfectly, like it did before. However, i keep getting the following message ""The disk you inserted was not readable by this computer". I haven't tried anything, since upon reading various post regarding this problem, i get bits of information but never the complete solution.I have many pictures/files/etc. that i refuse to lose. I know this can be fixed, just need a bit of help to get it done. Any feedback would be greatly appreciated. Merry Christmas to you all, and hopefully someone can help me out.
-guS

OK. for anyone who has had or is having this problem, I think I've found a solution, or a least one that worked for me:
Select your start-up drive, do a Get info (Command-I)
At the bottom where it says sharing and permissions, I had two items: System and Everyone. Both were set to Read. I unlocked using administrator password. I then reset the two items above to Read and Write. I then clicked on the little plus sign which brought up a dialog window. In that I selected Administrator and then set that to Read and Write.
My audio CD's now mount as they always have for years! Very odd, and honestly I could not explain why this worked, but I figured it out myself, something that I now feel I owe my self a fine Belgian beer.
Good luck

The disk you inserted was not readable by this computer-I KNOW!

Hello
Does anybody know how can I make the Finder ignore a certain volume and not prompt me to initialize it every time I plug it in?
I have an external disk encrypted with a third-party utility (TrueCrypt) which means that OS X cannot mount it. The Finder is not happy with that, and prompts me with an annoying popup every time I connect the disk. The popup says: "The disk you inserted was not readable by this computer" and asks if I want to format it.
How can I tell it to ignore that particular disk? I know it's not readable, that's on purpose!
Alternatively, can I partition it in such a way to avoid the warning? I've tried both encrypting the whole disk (no readable partition map) and encrypting a single partition (with a valid MBR partition map.) Both ways cause the nagging.

No.
Truecrypt is not implemented in the System so that it mounts the encryptet volume automatically. that would be kind of stuipd, since its designed to only mount the drive with a password.
When you plug in the external HD with an encrypted volume, finder tells us "i cant read that ****, format it".
thats when you launch truecypt, select that partition, and enter its password.
truecrypt then mounts the volume with MacFuse and it shows up in the finder.
there is currently no way to make truecrypt prompt for a password automatically.
so, the question is and remains, can we disable the finders "initialize volume" dialog?
truecrypt is a terrific applications. too bad os x is yet too ignorant to non-known filesystems.

The disk you inserted was not readable By this computer (Error)

Hi
everytime in the last couple of days im inserting a bank Cd to my cd/dvd drive (MATSHITADVD-R UJ-85J) im getting the same error
"the disk you inserted was not readable By this computer"
it only happen when the disk is blank. all other disks work ok.
haven't install any new software or hardware, but had some HDD problems.
any suggestion what should i do?
my system profile is:
version 10.5.7
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W873226** <Edited by Host>

first time posting so not sure this ended up in correct area...
I had same issue except only repairing the permissions didn't solve anything for me. *_If you recently upgraded your iTunes to 8.2_* check your permissions for errors, fix the errors, then restart computer and if that doesn't fix it, then try one of the 3 solutions below as there is a *known burn issue with the recent 8.2 update!*
My permission errors - permissions differ on ./Applications/iTunes.app/contents... etc, should be -rw-rw-r--, they are -rwxrwxr-x
I called Apple Care and we figured out 3 work arounds til a fix is released.
Solutions 1,2 are recommended by Apple Care. I used solutions 1 (easy) and then 3 (complicated).
Option 3 is a pain and takes A LOT of time and HD space or external HD if you have tons of music, podcasts, audiobooks, etc, loaded into your iTunes.
_*3 possible solutions:*_
1. Use the Finder window already built in the mac (to burn onto blank cds) -
Open Finder Window, go to File in the Menu Bar at top of computer, create a new Burn Folder, drag items to the folder and click on the burn icon inside the folder, insert blank disk when asked, add name, select burn speed, burn the cd.
2. Use the app Burn 2.3U -
Found at Apple.com in download section works like a Finder Window and converts audo files to MP3 automatically. (You can set up iTunes to do this as well)
3. Install an older version of iTunes 8.0.2 (couldn't find 8.1 thru 8.1.051) -
I found 8.0.2 at Apple.com, this process is complicated and you will need lots of HD space or external HD to do this because you'll want to back up your music library and you will need to delete version 8.2 BEFORE trying to install an older version. Otherwise stick with option 1 or 2 til a fix is released by Apple.
I ruined 8 blank cd's that actually burned but then I got the error message "the disk you inserted was not readable by this computer (Error)" at end of burn cycle and sometimes early disk ejections. _*I had no problems before the iTunes update in the past 5 days.*_ Still can't read/play the 8 disks but the problem went away!
I had burned 20 cds no problem last week with same media disks that were producing errors after doing the iTunes update, now after chosing to downgrade my iTunes I'm back to burning with no issues!
8.2 has 2 versions 32bit or 64bit, one of them may be PC/Windows version only but not sure which one I upgraded to or if that's even a factor with the permission errors I had.
Best wishes

HT1923 did anyone get the apple application support was not found when trying to instal?

I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Re: The specified topic [0] was not found

I get this error when I click on a link in an email on my iPhone to a thread that I'm monitoring.
I don't get the error when I click on the same link from my PC.
Does anyone have a workaround?
Specifically, it looks like this:
Apple Discussions
Apple.com>Support>Discussions
Error
The specified topic [0] was not found.
Useful links:
Forum Home - browse the forums here.
Search Forums - visit the search page to query all forum content
Apple.com>Support>Discussions
Thanks in advance for any response :o)

Hello everettwolf,
As Don Archibald posted, the Login Error message is a know issue, that the Hosts / Sysops are aware of, and that hopefully, will soon be resolved.
And here is a more comprehensive list, of the other Topics in this Forum, concerning this issue, that have been previously posted.
You'll find additional info, comments by a Host, and other temporary work-arounds.
Such as, if you do not quit your browser, there is no need to login each time you return to Discussions.
After Log-in, " An Error Has Occurred"....
Fourm redirection error after login
Old Login page
What Gives With The Login?
An error has occurred. We apologize for the inconvenience
Error no matter browser I use
More forum unreadable also user unfriendly
i know this has been discussed but the login error...
Log in errors
Every time I log in and try to post I get error message
Still receiving "Error" message while trying to login?
Error after login
Error when logging into Apple/Support/Discussions
Login for Discussion Forum Problems
Error logging in
How come?
Error after login
Error message on successful logo
Problems logging in
Each time I sign on it says "Sorry error"
C'mon, Enough Already with the Error Message Upon Logging In
ali b

Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-Igor

Hi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help! The problem Flash Plugin was not found !

Help!
I get a message in Dreamweaver
The problem Flash Plugin was not found ! To view Flash content in Live View install the
Netscape/Firefox Flash Plugin from "adobe.com".
I only use Chrome and Internet Explorer, I haveinstalled Safari and Firefox.
What to do?

Unfortunately Flash is installed in different ways on different browsers. I have the whole CS suite, so it might be possible there is no Flash player installer in the basic DW installation. What you need to do is as DW is telling you and download the Flash Player to install. IE uses ActiveX to install Flash and Chrome has it's own and Google updates the Flash player with its browser which may not directly correspond to the Adobe updates.
If you go to http://get.adobe.com/flashplayer/ in IE click on the "Different Operating System or Browser?" link at the top. Click on your operating system which I will assume is Windows because the Mac only has one installer and you don't strike me as a Linux or Solaris user. Then select "Flash Player 10.3 For Windows - Other Browsers". Run the installer and you will be good to go.

UI error "The requested lookup key was not found in any active" workaround

Hi All.
Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
Some facts:
- The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
- The error occur because the SAP client fail to provide the correct/entire connection-string
- The problem is actually an underlying problem from Microsoft (try searching google with the error message)
- Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
Some additional observations
- The error mostly happen just after startup of a windows machine
- We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
- Seem to be happening more often of slower machines
Workaround
Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

Hi,
I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
Is it possible connect twice?
Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
It is over
Windows XP 2002 SP2
SBO2007A patchlevel 15
VS 2005 C#
SQL Server 2005
Thank you

UCCX "The ID you entered was not found"

Similar Messages

Maybe you are looking for