UCM 11g hardware recomodations

Hi!
I can't find any hardware recomodations for UCM 11g.
Do you now any datasheets or documentation with hardware informations like in
"Content Server Installation Guide for UNIX" for UCM 10g?
We are going to use solartis.
kind regards
Alex
Edited by: 879801 on 03.10.2011 07:10

I'm afraid there is no simple answer to that. You should start with sizing (how many "license" CPUs you will need). That will correspond to your usage requirements (how many GUI reqs, how many conversion reqs, how many search reqs, etc.). If you have specific reqs in one area (e.g. conversions), you might want to have a special server just for that (WebCenter Conversion Server is enough).
Another question is: how much data you will have? You might have your data just on a harddrive (for VERY small projects) or in a NAS/SAN storage. Here, you will mainly depend on the overall volume and required seek time.
Another question is: do you want to have your database on the same machine, or separate? (I'd recommend a separate machine, even if you store there just metadata).
If all you need is just a single node machine for UCM (J2EE apps) only, you might go with almost any commodity server - have your HW rep recommend something for you. Just make sure it has enough memory (8 GB at least, 16 GB ideal).

Similar Messages

Oracle UCM 11g Vs Oracle UCM10g

Hi,
I want to know the difference between Oracle UCM11g and Oracle UCM10g.
1. Whats the primary benefit for the client for chosing Oracle UCM 11g than Oracle UCM 10g.
2. Whats are all the changes added in UCM11g from customization perspective.
- Is Component Architecture is followed in UCM 11g
- Is IdocScript/Resource ,Template,Service,Service Handler,Filter are still exist and customization is possible through them?
Thanks & Regards,
Karai
+971 55 841 6091
Edited by: user3491234 on Jan 4, 2011 10:56 PM

biggest differences
1. You need WebLogic for 11g. 11g UCM runs as a java application inside of WLS.
2. WLS handles all security. UCM no longer controls security. There are NO local users (except for running the stand alone apps) anymore. All users are outside in a AD or LDAP store of some kind.
Ramifications:
1. For large enterprise systems the clustering and management available for WLS make a system extremely scalable.
2. Any beneficial properties of WLS now apply to UCM (there are many but I am not a WLS expert)
3. if UCM is all you need and you are not planning a clustered system and your hardware is not the most current.... then maybe 10 g is a better choice. Maybe.
4. Customization for the CS is unchanged, but things like security being different will break some customizations. As with any upgrade some includes and some resources change and thus break an existing component. Test custom components fully.

UCM 11g gives error while opening systemproperties in production

UCM 11g is giving error while opening systemproperties in production mode, it says root user cannot install it.Please suggest.

do you have any directories owned by root? I've seen some nfs issues change ownership of mounted directories when they're remounted.
is anything in the /bin/ directory owned by root?
I think you should be safe to chown back to your install user.
-ryan

Gett 403 error code when trying to access UCM 11g from Admin console -- deployment

We have deployed UCM 11g in cluster mode. When I test the application via the admin conssole --> deployment --> UCM. I can access UCM only on one member of the cluster. The other member gives me a 403 error code..

Please, take a look at https://blogs.oracle.com/proactivesupportWCC/entry/clustering_and_high_availability_for (and contact the support group as advised)

UCM 11g File missing from search result although file is accessable

When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
or use following url to get document information:
http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
the file is not in the search resule even search by ID.
also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
Is this a known problem? the same search was working in UCM 10 perfectly.
Thanks

The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 --- @ResultSet SearchResults ---
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 numFields=66,*numRows=1*,currentRow=0
also, the infomation following above give the deteail field information which match with the missing document.
I looks like UCM just did not bring it to UI as part of search result.
This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
it seems query did find the documents but UI did not show it.
Not sure if this is a known bug.

Content migration Stellent 7.5 to UCM 11g | Facing trouble

Hi All,
We are upgrading from Stellent 7.5 to UCM 11g. Stellent 7.5 is on windows 2003 with SQL 2005 database, and UCM 11g is on Linux RHEL 5.6 with Oracle 11g database.
We are using archiver to migrate contents from Stellent to UCM. The import batch program is successfully executing. Below is the process we follow to migrate the contents which are in workflow.
1- Moved folders for migrating user workflow history and states of workflows
     <stellent idc root>\data\workflow to <ucm root>\data\workflow
     <stellent idc root>\data\user\profiles to <ucm root>\data\user\profiles
2- Migrated table data
     - truncating table data, the tables are : Revisions, DocMeta, Documents, DocumentHistory and RevClasses etc
     - Migrating data of these tables from MSSQL to Oracle so that workflow state, document checkout states are also preserved
     - wf_in_queue stores did of content therefore old did (of 7.5) needs to be preserved to show documents lying in user's queue
     - As well as there are some custom tables which are dependent on did.
Now the problem is, the native url of the link is pointing to new did.extention which was generated while content import through archiver. And if we migrate the table data as mentioned above the native url shows the old did.xls but this file doesnot exists in the file system.
Is there any who also faced the same situation?
Or is there a better way of migrating contents from 7.5 to 11g.
Thanks,
Rajiv

There is no supported direct migration path from 7.5 to 11g. The supported migration path is to upgrade the 7.5 instance to 10g, then upgrade the 10g instance to 11g.
I think Tim says it best here.
Changing the UCM Database

Oracle UCM 11G missing Web Form Editor

Hello All,
Oracle 10G UCM provided a WebForm Editor. After installation of newer version Oracle UCM 11G we found the feature is missing.
Is there a substitute provided by Oracle in 11G version for the same?
We need to provide functionality to end users where they could go and create some forms on their own. We were thinking to use Web-Form Editor for the same, but to our surprise we found the feature is missing.
Can anyone suggest if we are missing something. Any help is appreciated.
Thanks.

Kent,
You're correct that the general UCM docs don't include that detail, but the FormEditor component readme.txt does include that info. I didn't open the readme.doc, but the readme says that there's more info in there.
From the component readme:
<snip>
Updated 2010-02-16
The HTML editor UI is now only enabled if the configuration parameter HasWebFormEditorUI is set
to true. See BUG 9218712
</snip>
Thanks,
-ryan
Ryan Sullivan | ECMconsultant
http://www.ecmconsultant.net/
Edited by: Ryan Sullivan on May 5, 2011 12:25 PM

Unable to create content properly in UCM 11G using validateStandard filter

Hi All,
    We have used validateStandard filter to assign content id with 16 digits in UCM 10G and it worked well, we deployed this component in UCM 11G but it is not working properly. When we click on Check In button content is getting created and displaying Check_In Confirmation with 16 digit Content ID, upon clicking on Content Info it is displaying the complete info page. When we try to search the content it is not displaying in search results, also when tried to export it using Archiver it is not creating batch file. When we see logs in View Server out put it is displaying
Unable to lock content with dDocName: 6322932684534064
File to be removed: D:/oracle/ucm/cs/oracle/ucm/cs/vault/~temp/6322932684534064_meta.htm
Below is the code and its corresponding log after check In is performed
trace("=====Set 16 digit random number as ContentId=====");
             String contId = databinder.getLocal("dDocName");
             trace("=====value of contId====="+ contId);
        if("".equals(contId))
        //trace("=====Inside ContentId generetion=====");
        int maxdigits = 16;
        StringBuilder result = new StringBuilder();
        Random r = new Random();
        for (int i = 0; i<maxdigits; i++)
        result.append(r.nextInt(10));
        databinder.putLocal("dDocName", result.toString());
        trace("=====Generated ContentId is====="+ result.toString());
View Server O/P:
=====Set 16 digit random number as ContentId=====
=====value of contId=====001885
=====Generated ContentId is=====6322932684534064
>(internal)/6 07.08 15:09:28.273 IdcServer-968 Unable to lock content with dDocName: 6322932684534064
>(internal)/6 07.08 15:09:29.476 IdcServer-968 File to be removed: D:/oracle/ucm/cs/oracle/ucm/cs/vault/~temp/6322932684534064_meta.htm
Thanks,
Ashok

Its a bug. References BUG:16231709 - OBIA7964:ERROR WHILE CREATING DATA WAREHOUSE TABLES USING DAC 11G
So far the workaround is to use one Container Name at a time when creating the Warehouse.
If helps mark and update back

How Indexing function in Oracle UCM 11g

Hello All,
I am using Oracle UCM 11g on Windows platform.
I wanted to know as how the indexing in Oracle UCM Funtions? Here are few more questions related to this.
1. If multiple language characters are added in document and if document is indexed, then
how the data (tokens) will be stored in Database?
2. How the search will function

Hi
1. If multiple language characters are added in document and if document is indexed, then
a. how the data (tokens) will be stored in Database?
This is stored in the DB tables IdcColl1 or IdcColl2 ( if DB FullText is search indexer engine) and table would be IdcText1 or IdcText2(if OracleTextSearch indexer is used) . It is these tables that store the entire data from the contents and they are referred to / queried when a FT search is invoked from UCM .
b. how indexing will be done?
Indexer would extract all the data from the contents in case of FT indexer mechanism and would store them in the DB tables mentioned above . It is stored in BLOB columns where in the extraction process would do an insert for every content item that is being processed when Collection Rebuild Cycle / Automatic Update cycle is started .
2. What is settings to be done in Oracle and search engine for this?
For DB the relevant UCM scripts need to be executed so that the correct role are created and the packages are created.
3. What will be extra settings need to be done in case if the OS changes for example Linux.
The relevant libraries need to be checked to make sure that indexer can access them since there are lots of dependent libraries for the indexer process which is invoked by the TextExport process and these libraries vary for different OS . As part of the indexer process to be running fine all that needs to be done is to install/enable the OS specific versions of ContentAccess component on UCM .
Hope this gives an understanding on the Indexing part of UCM .
Thanks
Srinath

Oracle UCM 11g Config with DB

Hi,
I have configured Oracle UCM 11g in oracle sql developer, but am not able to see the tables related to Oracle UCM..(ex: Revisions, Docmeta).
Any documentation on this or any one faced this kind of issue.
Thanks...

I'd suggest you to follow the Installation guide - see Oracle&reg; Fusion Middleware Installing and Configuring Oracle WebCenter Content 11g Release 1 (11.1.1) - Contents
In a nutshell, tables (and everything else in the data model) are created by a utility called RCU. This is one pre-req to run the installation. Another issue could be that you have done installation, but you don't use the correct db user (scheme owner) to connect. The correct user for an installed instance can be obtain from the Weblogic admin console.

Getting error Failed to check in document from ODC to UCM 11g

Hi:
I am getting the below error while trying to commit image from ODC running on windows to UCM 11g running on linux
SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
     at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
     at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
     at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
     at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
     at com.jniwrapper.Callback.enterPoint(SourceFile:222)
     at com.jniwrapper.Function.invokeCFunc(Native Method)
     at com.jniwrapper.FunctionCall.a(SourceFile:126)
     at com.jniwrapper.FunctionCall.call(SourceFile:34)
     at com.jniwrapper.Function.invoke(SourceFile:188)
     at com.jniwrapper.Function.invoke(SourceFile:212)
     at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
Can anyone help me to correct this error?
Thanks & Regards,
Raj
Edited by: user13270764 on Dec 8, 2010 10:59 PM

Raj,
Are you using the 11g commit driver for ODC. Do you have the URL in the correct form:
http://Instance/web root//idcplg&AUTH=INTERNET
Thanks
Data_Bitz

AD Integration with UCM 11g - Selecting users from multiple OU

Hi All,
I have integrated AD with UCM 11g and able to login with AD username/password to UCM application.
The one problem I face, the users of this application are scattered in different OUs in AD. Like OUs are created for different locations and users are present in that OU. I'm unable to select all the users of this application from different OU's.
Like the users are present in below OUs.
OU=Users,OU=America,DC=compnay,DC=net
OU=Users,OU=Canada,DC=compnay,DC=net
In User Base DN - What should i give? When i give any one of the above I get the users properly.
Also is it possible to select users by querying a security group in AD and getting all the members (Users) of it. Because in our application we have only three roles (mapped to the corresponding three security group in AD), and all users of this application are assigned one of that role. So, I could get all the users by querying the security group. But I do not know if that is possible.
Please advise.
Kind Regards,
Selvam S

Hi Selvam,
Just put User Base DN: DC=compnay,DC=net
This will pull all users from both OU, along with some unwanted entries like computers on the domain. Another, possibly silly proposal, would be to create two Ldap authenticators with different User Base DN. Both should be on the top of authenticators list with Sufficient flags.
Regards,
Boris

Information Architecure for UCM 11g/WebCenter PS4

Hi
Can anyone share their info architecture findings for UCM/11g and WebCenter PS4 e.g. security model, metadata model, taxonomy approach for managing group spaces. I'm keen to hear if you've put a info governance structure around the content for example - and if so - how did you form it? Where did your security model stope e.g. at Group Space level, or did you have to consider the confidential nature of documents within folders in the group space. Have you add additional metadata fields to help with search?
Regards
Michelle

Wll, it's quiet easy. Webcenter is designed to handle services. UCM is also complettly service oriented so you could create a webapplication with webcenter where you define services from UCM and create your own user interface.
It's nothing more than the fact that webcenter can handle services (WSDL, SOAP).
You could create a site without siteStudio, using webcenter. Nothing wrong with that but don't forget that siteStudio has lots of tools that are great for UCM like the contributor mode. Also, the fragments that are allready build in in siteStudio give a big advantage. If you want to create these things in zebcenter, you'll have to start from scratch.
I do believe Oracle is working on an portal like interface to create portlets and stuff, perhaps they will create some tools special for the use of UCM and webcenter. This offcourse would be very nice

UCM 11g with IBR 10g

Anyone try to connect UCM 11g to IBR 10g?
I've tried it but unfortunately got the following error
"No server defined for FUILD_CURRENT_JOB_STATUS. Exception type is 'java.lang.Throwable'.

Hi,
Even though i am not tried with your configuration settings but looking at your error message it say "No server defined for FUILD_CURRENT_JOB_STATUS".
Have you done setup for IBR using Providers at Content server(Here you will mention you IBR server details)....?
Thanks,
Ravinder B

How to use RelatedContent component with UCM 11g without Records Management

As the subject really...
I have been playing around with UCM 11g and want to use the RelatedContent component in isolation of URM / Records management.
Can I still do this, and is it supported.
I have had a look at advanced component manager and also the RMFC page but if I select a custom install with only related content I get a whole bunch of RM related stuff in the interface that I do not need.
Any suggestions? Is the old RelatedContent component supported directly on 11g?
Thanks
Tim
Edited by: Tim Snell on 24-Aug-2010 08:16

Hi,
First this post is really helpful as I was looking around for enabling related content component in ucm11g.
Now i am able to see it in my enabled component lists.
However , i have one doubt. I have enabled the component and restarted the server. After that if i got the checkin page, i can see only 'wwxRelatedContentTriggerDate' metadata for the related content. My assumption was when I enable the component, i will get a metadata on the content check in page to link to the other content items.
So can you please help me
1) to help whether my understanding is correct?
2) if yes, why am i not getting the metadata to specify the other contents is not shown? what I need to do for the same?
Thanks a lot in advance
Regards
Poornima

UCM 11g hardware recomodations

Similar Messages

Maybe you are looking for