UCM bootup error: Err 14: Automatic removal of fake floppy failed

I need help in figuring out why I'm getting this error on bootup. I started getting this error after updating the OS to 2000.4.6sr9. The previous OS ver was 2000.4.4asr7. The server is an MCS-7815-I2-IPC1. CM ver 4.1.3sr8a.
The error is the following.
Err14: Automatic removal of fake floppy failed.
Press any key
The server does not have a floppy drive. Also, the floppy drive is disabled in the BIOS.

Hi!
Can yoy please try the following?
Reboot server,go into the BIOS setup(F1) and choose "Load Default
Settings"and then "Save Settings", the correct drivers will load at reboot and
server will come up clean.
This is documented in this bug:CSCsg07275
Hope this helps!
Regards,
Teresa.
If it helps, please rate! :)

Similar Messages

Error ERR-1802 Unable to find item

I was using HTML DB to execute a query. The region expected an item and based on
that item to retrieve a Clob and output to the GUI. Here is the PL/SQL code:
begin
if :P11_X_ID is null then
return;
end if;
for x in (
select column_value
from table( query_cfile( cursor( select theClob from demo where id =
TO_NUMBER(:P11_X_ID) )
) ))loop
htp.prn(x.column_value);
end loop;
end;
When I first time ran a page I was able to get the page back without any issue;
however when I entered the second ID, I got "Error ERR-1802 Unable to find item
id "187846523855309166"
OK
Unexpected error". Then I tried running the same page on different browser
(switch from firefox to IE ) and entered the second ID I was able to get the
page back. The same problem happened for the second browser, that is, if I
entered another ID to search, I got the same error.
And I turned on the trace using p_trace=YES
grep -in err stra_ora_10201.trc
83: error_template,
205: where parameter in ('NLS_LANGUAGE', 'NLS_TERRITORY',
'NLS_SORT')
221:alter session set NLS_TERRITORY = "AMERICA"
600: process_error_message,
634: process_error_message,
873:ERROR #34:err=1 tim=2122883685
968: value="wwv_flow.find_item_err2"
979: value="wwv_flow.unexpected_err"
1038:select error_page_template
1102: value="wwv_flow.err"
1113: value="wwv_flow.err"
1304: value="wwv_flow.find_item_err2"
1315: value="wwv_flow.unexpected_err"
1358: value="wwv_flow.err"
1369: value="wwv_flow.err"
1549: value="wwv_flow.find_item_err2"
1560: value="wwv_flow.unexpected_err"
1603: value="wwv_flow.err"
1614: value="wwv_flow.err"
1818:ERROR #34:err=1 tim=2122883705
1874: value="wwv_flow.find_item_err2"
1885: value="wwv_flow.unexpected_err"
1928: value="wwv_flow.err"
1939: value="wwv_flow.err"
2143:ERROR #34:err=1 tim=2122883713
2199: value="wwv_flow.find_item_err2"
2210: value="wwv_flow.unexpected_err"
2253: value="wwv_flow.err"
2264: value="wwv_flow.err"
2757: error_template,
2879: where parameter in ('NLS_LANGUAGE', 'NLS_TERRITORY',
'NLS_SORT')
2895:alter session set NLS_TERRITORY = "AMERICA"
3274: process_error_message,
3308: process_error_message,
3575: error_message,
3582: nvl(error_display_location,'ON_ERROR_PAGE')
error_display_location
3640: value="wwv_flow.no_page_to_branch_err"
Since the error happened on Cursor #34, here I retrieved the #34 from the trace
file:
=====================
PARSING IN CURSOR #34 len=461 dep=1 uid=63 oct=2 lid=63 tim=1069307285981395
hv=698873200 ad='5bdf916c'
INSERT into wwv_flow_data (
flow_instance,
item_id,
item_element_id,
item_name,
name_length,
item_value,
session_state_status,
flow_id
) values (
:b6,
:b5,
:b4,
:b3,
length(:b3),
:b2,
'I',
:b1)
END OF STMT
PARSE #34:c=0,e=132,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,tim=1069307285981373
BINDS #34:
bind 0: dty=2 mxl=22(21) mal=00 scl=00 pre=00 oacflg=03 oacfl2=1 size=24
offset=0
bfp=4063ffe8 bln=22 avl=11 flg=05
value=3707546874081609208
bind 1: dty=2 mxl=22(21) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=24
offset=0
bfp=0ae3d23c bln=22 avl=09 flg=09
value=1486322312855973
bind 2: dty=2 mxl=22(21) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=24
offset=0
bfp=0ae3e0d0 bln=22 avl=02 flg=09
value=1
bind 3: dty=1 mxl=32(08) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=32
offset=0
bfp=0ae3e13c bln=32 avl=08 flg=09
value="P11_X_ID"
bind 4: dty=1 mxl=32(08) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=32
offset=0
bfp=0ae3e13c bln=32 avl=08 flg=09
value="P11_X_ID"
bind 5: dty=1 mxl=128(02) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=128
offset=0
bfp=0adbb4e0 bln=128 avl=02 flg=09
value="57"
bind 6: dty=2 mxl=22(21) mal=00 scl=00 pre=00 oacflg=03 oacfl2=1 size=24
offset=0
bfp=4063ffc4 bln=22 avl=03 flg=05
value=105
=====================
PARSING IN CURSOR #35 len=119 dep=2 uid=0 oct=3 lid=0 tim=1069307285985274
hv=3286148528 ad='5bfee648'
select c.name, u.name from con$ c, cdef$ cd, user$ u where c.con# = cd.con# and
cd.enabled = :1 and c.owner# = u.user#
END OF STMT
PARSE #35:c=0,e=176,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=4,tim=1069307285985249
BINDS #35:
bind 0: dty=2 mxl=22(22) mal=00 scl=00 pre=00 oacflg=08 oacfl2=1 size=24
offset=0
bfp=407975e0 bln=22 avl=04 flg=05
value=32720
EXEC #35:c=0,e=514,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=4,tim=1069307285986292
FETCH #35:c=0,e=88,p=0,cr=2,cu=0,mis=0,r=0,dep=2,og=4,tim=1069307285986517
STAT #35 id=1 cnt=0 pid=0 pos=1 obj=0 op='NESTED LOOPS (cr=2 r=0 w=0 time=78
us)'
STAT #35 id=2 cnt=0 pid=1 pos=1 obj=0 op='NESTED LOOPS (cr=2 r=0 w=0 time=74
us)'
STAT #35 id=3 cnt=0 pid=2 pos=1 obj=31 op='TABLE ACCESS BY INDEX ROWID CDEF$
(cr=2 r=0 w=0 time=70 us)'
STAT #35 id=4 cnt=0 pid=3 pos=1 obj=53 op='INDEX RANGE SCAN I_CDEF4 (cr=2 r=0
w=0 time=62 us)'
STAT #35 id=5 cnt=0 pid=2 pos=2 obj=28 op='TABLE ACCESS BY INDEX ROWID CON$
(cr=0 r=0 w=0 time=0 us)'
STAT #35 id=6 cnt=0 pid=5 pos=1 obj=49 op='INDEX UNIQUE SCAN I_CON2 (cr=0 r=0
w=0 time=0 us)'
STAT #35 id=7 cnt=0 pid=1 pos=2 obj=22 op='TABLE ACCESS CLUSTER USER$ (cr=0 r=0
w=0 time=0 us)'
STAT #35 id=8 cnt=0 pid=7 pos=1 obj=11 op='INDEX UNIQUE SCAN I_USER# (cr=0 r=0
w=0 time=0 us)'
=====================
PARSING IN CURSOR #35 len=84 dep=2 uid=0 oct=3 lid=0 tim=1069307285988552
hv=2458412332 ad='5b779008'
select o.name, u.name from obj$ o, user$ u where o.obj# = :1 and o.owner# =
u.user#
END OF STMT
PARSE #35:c=0,e=142,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=4,tim=1069307285988532
BINDS #35:
bind 0: dty=2 mxl=22(22) mal=00 scl=00 pre=00 oacflg=08 oacfl2=1 size=24
offset=0
bfp=407975e0 bln=22 avl=04 flg=05
value=32720
EXEC #35:c=0,e=431,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=4,tim=1069307285989485
FETCH #35:c=0,e=187,p=0,cr=5,cu=0,mis=0,r=1,dep=2,og=4,tim=1069307285989805
STAT #35 id=1 cnt=1 pid=0 pos=1 obj=0 op='NESTED LOOPS (cr=5 r=0 w=0 time=169
us)'
STAT #35 id=2 cnt=1 pid=1 pos=1 obj=18 op='TABLE ACCESS BY INDEX ROWID OBJ$
(cr=3 r=0 w=0 time=74 us)'
STAT #35 id=3 cnt=1 pid=2 pos=1 obj=36 op='INDEX UNIQUE SCAN I_OBJ1 (cr=2 r=0
w=0 time=37 us)'
STAT #35 id=4 cnt=1 pid=1 pos=2 obj=22 op='TABLE ACCESS CLUSTER USER$ (cr=2 r=0
w=0 time=75 us)'
STAT #35 id=5 cnt=1 pid=4 pos=1 obj=11 op='INDEX UNIQUE SCAN I_USER# (cr=1 r=0
w=0 time=16 us)'
EXEC #34:c=0,e=8619,p=0,cr=8,cu=10,mis=0,r=0,dep=1,og=4,tim=1069307285991108
ERROR #34:err=1 tim=2122883685
=====================
Here is the version:
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Linux: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
My page is very simple, it contains one region, one item, one
button (click to search).
Would you please advise what next step should be?
Thanks in advance,

SQL> desc demo;
Name Null? Type
ID NOT NULL NUMBER(38)
THECLOB CLOB
The query just took the CLOB content and divided it into table of varchar2(4000) base on chr(10). The query worked well in PL/SQL when I replaced htp with dbms_output.
The branching was the default one, "Redirect To Page 11 (the same page)". I only created one region, one item and one button. That branching was automatically created.
Below was the output when I turned on the debug mode.
0.00: A C C E P T: Request=""
0.01: Fetch flow info
0.01: alter session set nls_language="AMERICAN"
0.02: alter session set nls_territory="AMERICA"
0.02: ...Setting NLS Decimal separator="."
0.02: Fetch session state from database
0.03: ...Check instance 936431675924660583 owner
0.03: ...Fetch iconbar, page, computation, process, ...
0.03: Fetch session header information
0.03: ...fetch page attributes: f105, p11
0.04: ...Check security schemes
0.04: Save form items and p_arg_values
0.05: Saved session state: 1486322312855973 "P11_X_ID" changedValue="49"
0.05: Show ERROR page...
0.06: Processing point: AFTER_ERROR_HEADER Home
     Error      ERR-1802 Unable to find item id "26896009627"
OK
0.07: Processing point: BEFORE_ERROR_FOOTER
Unexpected error
0.08: ...Determine if user ADMIN with SGID 504322868864112 can develop application 105 in workspace 504322868864112
Edit ApplicationEdit Page 11NewSessionNo DebugHide Edit LinksShow Edit Links
0.09: Saved session state: 26896009627 "" newValue=""
0.09: Show ERROR page...
0.10: Processing point: AFTER_ERROR_HEADER Home
     Error      ERR-1802 Unable to find item id "27133775492"
OK
0.11: Processing point: BEFORE_ERROR_FOOTER
Unexpected error
0.11: ...Determine if user ADMIN with SGID 504322868864112 can develop application 105 in workspace 504322868864112
Edit ApplicationEdit Page 11NewSessionNo DebugHide Edit LinksShow Edit Links
0.13: Saved session state: 27133775492 "" newValue="N"
0.13: Show ERROR page...
0.14: Processing point: AFTER_ERROR_HEADER Home
     Error      ERR-1802 Unable to find item id "17708687878"
OK
0.15: Processing point: BEFORE_ERROR_FOOTER
Unexpected error
0.15: ...Determine if user ADMIN with SGID 504322868864112 can develop application 105 in workspace 504322868864112
Edit ApplicationEdit Page 11NewSessionNo DebugHide Edit LinksShow Edit Links
0.16: Saved session state: 17708687878 "" newValue=" "processing of sql statements""
0.17: Show ERROR page...
0.18: Processing point: AFTER_ERROR_HEADER Home
     Error      ERR-1802 Unable to find item id "79615715229400664"
OK
0.19: Processing point: BEFORE_ERROR_FOOTER
Unexpected error
0.19: ...Determine if user ADMIN with SGID 504322868864112 can develop application 105 in workspace 504322868864112
Edit ApplicationEdit Page 11NewSessionNo DebugHide Edit LinksShow Edit Links
0.20: Saved session state: 79615715229400664 "" newValue="22467871247389"
0.21: Show ERROR page...
0.22: Processing point: AFTER_ERROR_HEADER Home
     Error      ERR-1802 Unable to find item id "187846523855309166"
OK
0.22: Processing point: BEFORE_ERROR_FOOTER
Unexpected error
0.23: ...Determine if user ADMIN with SGID 504322868864112 can develop application 105 in workspace 504322868864112
Edit ApplicationEdit Page 11NewSessionNo DebugHide Edit LinksShow Edit Links
0.24: Saved session state: 187846523855309166 "" newValue=""

Error: ERR-1002 Unable to find item ID for item "APP_SESSION"

Hello all,
I created an application for faculty in HTMLDB 1.6.
To get to the application faculty members log into a different website, and then follow a link to my application. The link re-directs them to a public page which pulls their unique ID from a cookie stored by the first website. After their ID is found they are automatically logged in, or if the ID is not present they are redirected to the main login page.
A few faculty members have tested the automatic login with success. One member, though, followed the same steps, but when he clicked on the link and was re-directed to the application he recieved an error "error: ERR-1002 Unable to find item ID for item 'APP_SESSION'."
As for the code, the code first retrieves the cookie and gets the ID from it. The variable term_id is then set to the correct term value. This term value depends on what term was selected from the previous application. The term value may or may not be null (they are not required to select a term prior to being re-directed). If it is null, the faculty member is brought to a term selection page. If it is not null, the faculty member skips this step and moves on to the next page. These steps are known to work properly.
This plsql code follows directly after, which should login the user and either redirect him/her to the term select page if the term value is null, or the main page if there is a term value present:
IF term_id IS NOT NULL THEN
wwv_flow_custom_auth_std.login(
P_UNAME => faculty_id,
P_PASSWORD => faculty_password,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':MAIN_PAGE:'||:APP_SESSION||'::::TERM_ID:'||term_id
ELSE
wwv_flow_custom_auth_std.login(
P_UNAME => faculty_id,
P_PASSWORD => faculty_password,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':TERM_SELECT_PAGE:'||:APP_SESSION
END IF;
owa_util.redirect_url('f?p=FACULTY_APP:LOGIN:&SESSION_ID.');
The last part redirects them to the login page if all else fails
Any idea why one faculty member would receive the message "error: ERR-1002 Unable to find item ID for item 'APP_SESSION'" while others would not?
*NOTE: All variable and alias names here are not the actual names within the application.

Ah, i see. I thought you only had to use v('APP_SESSION') in the login function while assigned the value of P_SESSION_ID, but I was wrong.
Thanks a lot Scott! It works perfectly now.
Tim

Can SeeBurger BIC Mapping tool automatically remove Delimiters?

Hi all,
When we map IDOC's to EDI X12 messages using the SeeBurger BIC Mapping tool, we sometimes have delimiters occur in fields such as name or address. We are using the setDestinationDelimiter and have changed our delimiters so this occurance is rare. However the problem may still occur. This causes an invalid message to be passed to our partner.
One option is to use XI mapping and the replace function on each field however this is cumbersome and not the ideal solution.
Is there a way to automatically remove Delimiter characters from fields as part of the BIC Mapping.
Cheers,
John

Hi Satish,
Thanks for re-iterating the problem. You are absolutely right that this does cause an invalid message.
Also thanks for your suggestion regarding asking business not to enter the data, this has been done and as stated the occurences of these delimiters in the fields will be low, usually due to user error.
We still however want to cater for these occurrences and prevent an invalid message being sent to the partner.
I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works. Anyone out there who can help?
Cheers,
John

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

How to automatically remove the wiki page's images from the Images library , when a wiki page is deleted

I have noted the following strange behavior inside my Publishing enterprise wiki site collection. Now by default when I create a new wiki page and I add Pictures to it, the pictures will be saved under the “Images” library and will be inside a unique folder
that have its name similar to the page name.
But when users delete the picture from the wiki page or they delete the whole wiki page, then the related folder inside the “Images” library will not be removed. So can anyone advice if there is a way to automatically remove the page’s pictures
folder from the Images library when the page is deleted? as currently i might end up having many pictures inside the Images library which are not linked to a wiki page, and they will waste my server desk space...

I think, not sure, there's no out-of-the-box solution in SharePoint for this problem. So I can only think of custom solution:
In event Receiver, ItemDeleting, you can delete images. The only downside is if some other pages are referring the images..... you need to check somehow which is quite time-consuming operations if you have thousand of pages in wiki library
A timer job, that will run periodically, every day or week, and clean all unused images.
Hide the default delete button and add your own. And then using your own custom layout page, show a 'configuration dialog' to user if they want to delete both page and images.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com
Please do not tell me this is not supported out of the ox ,,,,, i that i should handle this process by myself !!! and SharePoint does not support this feature .... this is another problem i should include in my list .....

Automatic removal of colour fringing of Panasonic lenses on Olympus body (micro 43) possible?

Hi,
Last week I sold my Panasonic GH2 and bought an Olympus OM-D E-M5. My 14-45 Panasonic lens shows some nasty purple colour fringing with the OM-D (not your ordinary green-purple chromatic aberration, but purple fringing on both sides of highly exposed items, such as steel wheel covers). This I never(!!) saw with the GH2. Fortunately I can correct this in Lightroom. I go (in Develope module) to lenscorrections - colour - remove edge (purple). This works really well, and I know I can synchronise all affected images. But I would like to have this done automatically, just as Lightroom automatically removes all colour faults when using micro four-thirds Panasonic lenses with a micro four-thirds Panasonic body. This is done through special data supplied by Panasonic which are read and implemented by Lightroom (I believe).
Unfortunately this doesn't work when using a Panasonic lens on an Olympus body, which is my reason for this question. I can make my own profile using Adobe Profile Creator to automatically remove chromatic abberations. Reading the tutorial I get the impressions these profiles only remove normal chrom. aberration, not the special purple colour fringing I am talking about. So: is there any way to automate this fringing, or do I have to work on all affected images in Lightroom using the technique I described?
Thanks a lot for your help!
Willem

Before you do all the work creating a profile, why not create a develop preset?
Then you can apply this preset on import to all images taken with this lens and camera.

Getting error "This file was removed" when trying to use sdk/test/httpd.

Hi, I wish to test my website using httpd.js. Now when I am trying create a add-on and use sdk/test/httpd by adding following line
var { nsHttpServer } = require("sdk/test/httpd");
I am getting following error:
Message: Error: This file was removed. A copy can be obtained from:
https://github.com/mozilla/addon-sdk/blob/master/test/lib/httpd.js
As new to Add on development I am unable to resolve this issue.
Thanks in advance.

Apologies for redirecting you to a different site, but this forum primarily handles end-user support. For extension development advice, please try here: [https://forums.mozilla.org/viewforum.php?f=7 Extension Development - Mozilla Add-ons Forum].

Strange error when using Automatic Row Processing

Hi All,
I have a page with 2 regions
- first is a form for data entry (4 fields - 2 hidden, 1 LOV, 1 text)
--> 3 buttons - Cancel, Create, Create & Create Another
--> Create branches to next page, Create Another branches back to same page
- second is report of items entered into the form (conditional display)
This all seems to be working, except that when I click either of the buttons, I get this:
Action Processed. -- The success message - so data is inserted
Unexpected error, unable to find item name at application or page level.
Error ERR-1002 Unable to find item ID for item " P31_PIECE_CNT)" in application "122".
And the 'OK' link. When I use the link to go back to the page, the data shows up in the report. So I know that the process is working up until it does the insert, but not sure why I get the error.
Corey
Database Version Information
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
PL/SQL Release 9.2.0.7.0 - Production
CORE 9.2.0.7.0 Production
Product Build: 2.0.0.00.49

All that is saying is that no such page/app item called P31_PIECE_CNT exists in the application and some after-submit component on that page is trying to refer to that item name.

Error occurred during automatic upgrade of MDL file

The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.

I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory

Block is not automatically Removed

Dear All ,
The system does not automatically remove the blocking reason I, if an acceptance decision is made for the inspection lot concerned. the blocking reason I must be removed in the invoice inspection/invoice release function.
Release of invoice block u2013 can it be automated from the IL release process ?
Thanks & Regards,
Deepu.

Use MRBR for release, you can schedule a job run for this program to run every night if required.
Regards,
Vivek

Error ERR-1412 Unable to resolve page alias (APP_ID).

Dear Friend,
I Have Create Report
select INVOICE_NO,INVOICE_TYPE,CURR_CODE,EXCH_RATE,NO_OF_PAX,FREE_PAX,EFFECTIVE_PAX,ACTIVE_FLG,
CASE WHEN APPROVAL_FLG='Y' THEN
'BLUE'
ELSE
'<a href="f?p=:APP_ID:4::SESSION::NO::::">Create New Invoice</a>'
END
AS LINK
from AR_INVOICE_MAS TM WHERE FILE_CODE=:P7_FILE_CODELink created but when i click on Link Then Show mw Error
Error ERR-1412 Unable to resolve page alias (APP_ID).
How to resolve it.
Thanks

Dear Friend ,
Jus PAss
'<a href="f?p=&APP_ID.:4:&SESSION.::&DEBUG.::::">Create New Invoice</a>'

Error ERR-1002 Unable to find item ID for item "ID" in application

Hi everyone,
I'm new to APEX and I've come across this error for the first time. I have a page with a classic report in it, and I want to create a link from one of the columns in the report (ID column) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to the other page and to only see the information for ID 118.
After creating the column link I receive the error message when I run the application:
Error      ERR-1002 Unable to find item ID for item "ID" in application
I've tried creating a link from one report to another before and it worked fine.
Thank you!
P.S. I'm using APEX 3.2

So, on page 1 I have some columns from a table (ID, name etc) and I want to link the values in the ID column to a report on page 2, so that the columns in page 2 (order no, type etc) show only the information for the ID I clicked on in page 1. I went to Page Definition -> Regions -> Report link -> click on the "edit" icon on the left of column "ID" and in the Column Link section I have the following:
Link text: #ID#
Link Attributes: title="Click to see deal information."
Target: Page in this application
Page: 2
Clear Cache: CIR,2
Item 1:
     Name: ID
     Value: #ID#
I have no item called ID on page 2.
Thank you!
Adina

Error ERR-1002 Unable to find item ID for item "" in application "11501"

Hi All,
I am new to Apex, still a beginner. Please need your help on this.
We recently upgraded to Apex 4.1 from Apex 3.0. The database version is 10.2.0.4.
I am getting this below error.
Error ERR-1002 Unable to find item ID for item "" in application "11501".
Unexpected error, unable to find item name at application or page level.
This error specifically occurs when two sessions are opened from the same browser, and the same page is accessesed. This was not occuring before in 3.0.
Thanks,
Sarvesh

Hi,
i have the exact same problem and situation. (but i dont use Oracle Apps, only APEX).
Migrated from APEX 2.2 to APEX 4.1
Application is (unfortunately) used and opened in Internet Explorer with more than one session/tabs by users.
In APEX2.2 this was working, in APEX4.1 i get the following error:
Error ERR-1002 Unable to find item ID for item "" in application "111".
Unexpected error, unable to find item name at application or page level.
Technical Info (only visible for developers):
is_internal_error: true
apex_error_code: WWV_FLOW.FIND_ITEM_ID_ERR
component.type: APEX_APPLICATION_AUTH
component.id: 29961616743801399
component.name: CUSTOM_LDAP
error_backtrace:
----- PL/SQL Call Stack -----
object line object
handle number name
0x1893e7410 676 package body APEX_040100.WWV_FLOW_ERROR
0x1893e7410 1008 package body APEX_040100.WWV_FLOW_ERROR
0x147cb1b58 742 package body APEX_040100.WWV_FLOW
0x147cb1b58 4729 package body APEX_040100.WWV_FLOW
0x147cb1b58 7094 package body APEX_040100.WWV_FLOW
0x18a3e9208 247 procedure APEX_040100.F
0x18ab6c258 31 anonymous block
So i thought this is an issue with the authentication scheme (that was migrated, too). I dropped it and recreated it, but same problem.
When i look to the URL after the re-login, it is:
https://<server>/f?p=111:3:1139701000375375::::,4753713078141275:
The strange thing is the part of ",4753713078141275:"
What is APEX doing here?
=> i figured out that this is a Page Item ID. I have the hidden item P3_REPORT_TYPE which interal ID is 4753713078141275.
I use the hidden item to conditionally display some regions on the page.
Or is the problem before the comma, the "NULL" value ",47..." ?
Can anyone help me or explain what is the problem here to get a solution?
Thanks and regards,
Matthias
Edited by: matze on 24.05.2012 10:05
Edited by: matze on 24.05.2012 10:30

Error ERR-1002 Unable to find item ID for item "" in application

Hello.
I have same problem like at guy from last message of this thread Error ERR-1002 Unable to find item ID for item "" in application "11501".
I have apex 4.2.1.00.08
Occasionally address box contains comma (f?p=102:LOGIN_DESKTOP:::::,). This bug do not have a logic, just occured.
Could somebody help me?

This select
select * from apex_workspace_activity_log t
where t.error_message like '%ERR-1002%'
returns about 40 rows. 1-3 for every day. Mb somebody know about this bug ?

UCM bootup error: Err 14: Automatic removal of fake floppy failed

Similar Messages

Maybe you are looking for