UCM - removing links issue

Hi all.
We have UCM for documentation control and management, and we can link content together, but we have an outstanding issue, of not being able to remove those links, and wondered if this had been fixed in a patch or upgrade??
Also we are on 11g, is this the latest version, or is there an 11.1. etc etc yet release?
thanks
Sally

I have the same problem.
Pls if you find anything about post it

Similar Messages

  • URL link issue

    Hi
    I am trying to create a link in my project to one of our
    company intranet pages. I am using a click box and the URL - it
    works fine in the Preview from Slide or next 5 slides, but when I
    Preview in Web Browser it doesn't connect. Any suggestions as to
    what might be the cause?
    Thanks
    Alex

    Hi Alex
    Hmmm, before investigating too deeply, I'm seeing some
    familiarity here. For starters, the first link is to a .PDF. It's
    been my experience that links to .PDF and Word .DOC files is "iffy"
    at best. If you truly copied and pasted the links, I'd first try
    removing the %20 from that first link. That's something the browser
    normally inserts for a space. So instead of:
    http://wlgweb/Corporat/HumanResources/Staff%20Conduct/EmailInternetUsagePolicy.pdf
    Change it to read:
    http://wlgweb/Corporat/HumanResources/Staff
    Conduct/EmailInternetUsagePolicy.pdf
    This may help and it may just be twisting in the wind. But
    I'd try that first. I've often seen linking issues arise from that
    silly %20. If possible, try to avoid that. I'm guessing here that
    it may not be possible to control in your case as someone else may
    be in control of those names. I've personally always opted to
    either use a mix of upper/lower case names ( StaffConduct ) or
    substitution of an underscore where spaces would normally occur (
    Staff_Conduct ).
    Other wierdness I've seen when linking to .PDF content:
    * I personally had a different PDF reader (Foxit) installed
    as my default. When Foxit was my default reader, PDF links refused
    to open.
    * I think this one is IE specific, but I've also seen it
    where if I have a .PDF in the same folder and open that way, even
    though the address is totally correct, the first time through, the
    link fails. With the totally correct address showing in the address
    bar. I simply refresh the page and bingo, the PDF shows! Go figure.
    I really don't believe that this one is related to Captivate and
    the way it calls the links. My gut tells me it's an IE thing. But I
    have nothing to back me up on this.
    I'm not sure what to say or suggest for the second link. I
    tested it myself and it doesn't work, which tells me that either
    the link is simply incorrect, or possibly it's located on an
    intranet site.
    Sincerely... Rick

  • Deleted user - Remove link to UserDisp or Person page

    Hi,
    I'm trying to figure out what removes links from Created By/ Modified By fields for a deleted user?
    To elaborate I have a user who no longer exists in LDAP source, so does not exist in UPA and in site collection UserInfo table (tp_Deleted) deleted. When viewing that users documents in SharePoint 2013 - "Modified By" field links to the /UserDisp.aspx
    page. If clicked it throws an error message (/_layouts/15/userdisp.aspx?ID=1212). For some other deleted users I'm seeing Modified By field is not linked..which would be ideal. For active users of course it take to the mysite person page.
    Is there any job which removes this link? I've waited long enough (weeks) but still running into this issue. Any suggestions would be greatly appreciated!
    Many thanks in advanced!
    BlueSky2010
    Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
    "Mark As Answer"

    Users who are marked tp_deleted will always remain where referenced elsewhere (e.g. Created By fields). This is to preserve referential integrity. This is standard behavior.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Remove Link "Download" any report or analysis

    Hi guys,
    Can I remove link of download in any report ?
    Thanks

    Hi,
    If you are retrieving Report from the web link/web applet you can do following.
    After Putting the Report URL link into the Web Link/applet. Put following options.
    eg. https://secure-ausomxXXX.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_AAPA-XXXXXX_Shared_Folder/Assign+Consultant&Options=r.
    Thus adding (&Option=r) at the end. can solve the issue as.
    Option=rfd. states r=refresh, f=printer friendly, d=downloadable.
    Regards,
    Syed Asif

  • How do you add and remove links to websites in folders on Safari?

    How do you add and remove links to websites in folders on Safari?

    For clarification, works like a bookmark of website only it is listed in toolbar with "Most Visited", "Latest Headlines", "News", and "Popular".  I have done it before but can't find it for the life of me.
    Thanks!

  • Slow program response, crashes when creating titles and dynamic link issues

    Dear reader,
    I am now trialling Adobe CC OSX with Premiere Pro and After Effects before deciding to subscribe but I am experiencing a lot of issues while working.
    I am now working on an animation, but editing raw mxf files also gives crashes and slow responses/ program refreshes.
    1) Slow mouse response
    2) Slow program refresh while key framing visuals
    3) Rendering in PP is extremely slow when AE is open in the background, when closing AE and re-initiate the render in PP it renders super fast
    4) Crashes. When I overlay titles in my time line PP regularly crashes
    5) Dynamic Link issues when working combined in AE and PP where file connections in the time line get lost when the AE project has too many sequences
    I am curious to find out if other people are also experiencing these issues.
    I am indecisive in getting the paid yearly plan or move to FCPX instead? Or should I get a new MacPro and is this model too old?
    It worked fine 2 months ago, however I was still working on FCP7. After updating it is really bad working with it...
    My system consist of:
    MacPro mid-2010
    OSX 10.9.5 (13F34) (new installation)
    2x2,66Ghz 6-core Intel Xeon
    24GB DDR3 ECC
    Nvidia Quadro K5000, 4GB
    2x PCIe SSD 1TB
    2x HDD 3TB
    2x HDD 2TB
    Feedback is much appreciated! Best regards, Alexander

    this does work for basic colour correction but not when trying to grade an entire suqence to achieve a specific style, applying a vingette or certain effects have to be done in after effects.
    I want to try and get my whole sequence into after effects but preserve the edits and effects added in permier pro, is there any way to do this?
    rich

  • How to remove links pointing to the same page?

    I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
    PDPage page;
    ASInt32 i,i2;
    AVDoc avDoc = AVAppGetActiveDoc();
    PDDoc pdDoc = AVDocGetPDDoc (avDoc);
    int pageNum = PDDocGetNumPages(pdDoc);
    for (i = pageNum - 1; i >= 0; i--)
    page = PDDocAcquirePage(pdDoc, i);
    int annotNum = PDPageGetNumAnnots(page);
    for (i2 = annotNum - 1; i2 >= 0; i2--)
      if...
      PDPageRemoveAnnot(i, i2);
    My Product Information:
    Acrobat Pro 8.1.6, Windows

    Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
    Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one).  Then you need to parse the action or dest to see what it is and where it goes.  If you don't like it, then you'll delete it.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Tue, 25 Oct 2011 09:25:32 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: How to remove links pointing to the same page?
    How to remove links pointing to the same page?
    created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

  • Pages: How to copy & paste formats & remove links

    I don't see a "paint brush" feature and can't see how to remove links from email addresses that are automatically being applied in my spreadsheet like Pages document. I'd like to remove all links without having to do each one separately. After I copy a format in one cell, I can't copy the format in another cell because "Paste format or style" is dimmed.

    Suggestion:  select a column by the header working label (A, B, C... for columns), then set the format of all the cells int he column at once.  Or do the same for rows.  And yes, the display of tables in Pages 5.2 when you are working on it looks for all the world like an Excel spread sheet, or Visi-Calc.

  • Removing links in web pages created using WPC

    Hi there,
    I am creating web pages using Web page composer. I would like to remove the links Send Feedback, E-mail, Print, Add to Favorites, RSS. How can i achieve this? We are running SP14.
    Your comments are highly appreciated.
    Regards,
    Ponraj M

    Dear
    For Remove links of
    "Add to Favorites"
      "E-Mail"
      "RSS "
      "Send Feedback "
    " Print "
    Go to Page>right click on it>Edit page-->Page link Option
    opne "Page link Option" and remove tick mark what u dont want to display on the page
    than Save it  and " Publish " it and "Finish"
    than go to "Site navigaion" Right click on it and "Publish Site Navigation"
    Reward Points if it is helpful

  • Remove link in document

    this question may look childish,
    is it possible to remove links in the document and have all images that were placed in the document as static ones? (no problem if this increases my indd file size)
    this problem happen for me because, i was using network resource for placing the images in the document, once there not exists a network connection / unable to acces the network resource, its unable to get the high resolution images from the link and it always shows low resolution image.
    things i have tried,
    i looked for any options while importing/placing the image, but no use.
    tried to remove the link manually, not succeeded

    In the links panel there is an option to in embed link.
    Another option is to have the server connected and package your document up to a folder on your local machine thus keeping the links without blowing the file size outta all proportion.

  • How to remove links from apple watch with link bracelet?

    Any idea? Will I be able to do it myself or I need to take it to apple shop to remove links to fit my wrist? Or its one size only?!

    open the strap at the clip.
    look inside of the strap and there are "buttons" on each link.
    press the button and carefully pull the link.
    repeat to get required size
    carefully put the two open ends together and press closed.
    done

  • OCCI linking issue on HUPX11

    Hello,
    I am trying to make an OCCI9.2 sample application (occidesc) getting linking issue. I am don't think I have all the required Oracle library in my linking options. What am I missing?
    My development environment: HUPX11, g++3.3.2, OCCI 9.2
    ===============================================
    Link flags:
    LDFLAGS = -L$(ORACLE_HOME)/lib32 \
    -L$(ORACLE_HOME)/rdbms/lib32 \
    -locci -locci9 -lclntsh \
    `cat /u01/home/oracle/product/920/lib32/sysliblist`
    ========================================================
    Linker errors:
    /usr/ccs/bin/ld: Unsatisfied symbols:
    typeinfo for oracle::occi::SQLException(first referenced in occidesc.o) (data)
    oracle::occi::SQLException::SQLException[in-charge](oracle::occi::SQLException const&)(first referenced in occidesc.o) (code)
    oracle::occi::Environment::createEnvironment(oracle::occi::Environment::Mode, void*, void* (*)(void*, unsigned long), void* (*)(void*, void*, unsigned long), void (*)(void*, void*))(first referenced in occidesc.o) (code)
    oracle::occi::MetaData::getBoolean(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)
    oracle::occi::MetaData::operator=(oracle::occi::MetaData const&)(first referenced in occidesc.o) (code)
    oracle::occi::MetaData::getUInt(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)

    I can't find any documentation referencing supported compiler for OCCI. Do you know of any from Oracle that support my environment?
    Environment:
    Oracle 9.2
    HPUX B.11.00 A
    Thanks,
    Minh

  • Secure link issue

    I cannot update my I tunes. I get a secure link issue when I run a diagnostic check. This is using windows xp system

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Removing links from E-recuritment Dashboard

    Dear Experts,
    I want to remove links from E-recruitment  powl application. And I want to use this customized dashboard for External agents only.
    Kindly refer the screenshot and guide for same.

    Hello,
    Please check the "Supress Footer " by following the below steps.
    GOTO SPRO
    SAP Customizing Implementation Guide
    SAP NetWeaver
      Business Intelligence
       Settings for Reporting and Analysis
        Settings for Information Broadcasting
          Settings for Distributing E-mails
           in this view check  'Supress Footer'
    I hope this helps.
    Thanks,
    Michael

  • Remove link to selfregister

    Hi all
    how to remove link to selfregister user on start page in OIM 11g? Is it possible by simple configuration?
    best
    mp

    Hi J23
    You have marked me as Helpful and OIMLearner as Correct. If something can be done with simple configuration then why will someone change the JSPX file.
    It's not about points but it's about doing the things in a right way.
    Even Oracle knows about such requirements that's why they have given this as Configurable as it was there in OIM 10g as well which will not impact after upgrade also.

Maybe you are looking for