UCM/UCCX Training (not for certs)

Is there any self-paced training out there for UCM or UCCX? I'm not looking for certificiation, just something to help our administrators use and manage the products. Intstructor classes are an option, but I'd also like to know about any DVD or web based options?
Thanks

Hi,
There are training videos you can download from forums which explain how the CallManagers function and how to configure them. Unfortunately these aren't much use without the practical experience to back it up.
I would definately suggest they do CVoice and CIPT courses to get a good grounding in the technology.
UCCX is a little more complicated as you need a bit of experience in scripts. I would wait until they fully understand UCM's before sending them on a training course for UCCX as most of it will be too much to take in.
Personally, I would recommend the following:
1) Download video tutorials + ebooks for reference
2) set up a lab in VMWare for them to play with
3) train them for CVoice and CIPT
4) send them on a UCCX course
The Cisco website is also extremely helpful if you need any installation, upgrade or troubleshooting documents....
Please rate useful posts....

Similar Messages

Some thoughts on the dearth of training materials for the new MCSE certifications

Mostly this is venting... while it would be nice to see some remediation, I have no such expectations.
Given that Windows Server 2012 was GA 15 months ago, I'm severely disappointed at the lack of published training guides targeted to the MCSA and MCSE certifications (most notably the 70-413 and 70-414), and specifically with respect to the objectives involving
System Center that are included in those examinations.
I used the Exam Ref by Steve Suehring, and frankly was quite disappointed, although I'm not sure whether to blame the book, or the question pool on the exam. What I did observe was that a significant percentage of the concepts discussed in the Exam Ref book,
and ostensibly in the objectives for the exam, were not actually touched at all by the exam. More significantly, I encountered concepts on the exam that were not even mentioned in the Exam Ref. Presumably the Training Guide (700 pages) will go into much more
detail (e.g. the exam I encountered seemed very heavy with respect to Active Directory Site design), but it won't be available until April (at the earliest).
Further, there's nothing available in the realm of preparation materials for the 70-414. The Exam Ref was supposed to be available in September 2013. (The O'Reilly site says March 2014, but the MS Exam Page is not yet updated.) Who knows when it
will really be available, and I don't even see a mention of an actual Training Guide for this exam.
Adding insult to injury, I bought into the special last spring to take the -417, -413, and -414 (which expires tomorrow), and have been unsuccessful at passing the -413 (due to the poor prep materials) and didn't even consider the -414 (due to the non-existent
prep materials). Frankly, I feel very ripped off -- (And if the actual questions on the -413 compared to the Exam Ref are any guide, I'm not particularly encouraged by the eventual availability of the -414 Exam Ref.)
I do see where there's still a discount package available (including 2nd shots) for the MCSE: Server Infrastructure ($255 for both exams plus 2nd shots), available until May 31, 2014-- and expire on December 31, 2014. I think I'll wait until May and see
if [a] the -413 Training Guide gets published and [b] what the "master plan" will be for training for the -414.
Btw.. it seems the prospects are no better for the MCSE: Private Cloud exams either.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

For post-production and audio work, having a quieter computer is one of the reasons I ordered a Mac Pro - quieter is good. And as my MDD dual 867Mhz is now as long in the tooth as I am, it couldn't come at a better time. I was really contemplating buying a quad G5 the past 6 months, but then heard the professional desktop would come out during the developer's conference, and I'm glad I waited. The price is absolutely - and insanely - great. Mine should be here on the 15th, and I'll be counting the hours. As for the risers, I'm willing to endure a few nanoseconds as a trade-off.
Regards,
Rube
G4 867x2 2Gb Mac OS X (10.4.7)

End user training material for SAP-MM

Friends if any body has got training material for end user for SAP-MM .... plz share with me

hI,
While prepairing the End User Material one should keep in mind that user does not know Com[plete flow of the system
Secondly you should provide him/her with step by step process of the each operation according to the role description
Thridly you can also plan according to the day to day activities of the User
Ok Reward Points

Native Installer on Mac - not for App Store

I am trying to get an Air 3.1 native installer application to work for Mac under Mountain Lion's security model. The app is not for distribution from the App store but it is downloaded from the web so it triggers Gatekeepers security on both the Installer and the App.
I am signing the Air app with a standard (Not Apple Developer) certificate. I then copy the contents of the Dmg (the installer) into a new directory and use my Apple Id to codesign the Installer. This allows the installer to run but when it attempts to actually launch the app, Gatekeeper stops it saying that "the App is not from the App Store or an Authroized Developer"
I tried to use the Apple Developer Cert in Flash Builder but I get an error stating to check my cert or system time (see this: http://forums.adobe.com/message/4576223#4576223)
I know I can use adt to create the base App (use the bundle option). I can then sign the base app with the Developer Cert. But how can I take that app and produce a native installer from it?
Also, this app DOES NEED webkit resources - ifthat helps.
Any insight would be greatly appreciated.

Hi Barbara I´ve done what you suggested and I´m having the same problem. Its freezed. Is there any way I can download the update? I´m
stuck with a Photoshop that doesnt work. Adobe says that they cant help without a serial number and apple doesnt let me update. This is the most bizarre I have lived in terms of software.

To See training session for XMP Metadata

Hi all,
Can u plz tell me the link useful in training Session for getting and setting the metadata for image.
Thanks
Best Regards
Dan

Hi,
Your understanding is correct.
I am able to add the metadata up to a certain point of time. After that as the CanPutXMP is failing, I am not able to put XMP packet inside the file.
There is XMPMeta object - meta, which is derived from an AI file.
SXMPMeta meta;
myFile.GetXMP(&meta);
//modifications appended to meta.
string metaBuffer;
meta.SerializeToBuffer(&metaBuffer);
if(myFile.CanPutXMP(meta))
// If so then update the file with the modified XMP
myFile.PutXMP(meta);
after certain point of time CanPutXMP is failing.
Will you please tell me how to handle the CanPutXMP situation? What are probable causes for the same? I tried to google on it, but did not get satisfactory explanation.

Re: Apple Pro training series for FCPX -

APPLE PRO TRAINING SERIES FOR Final Cut Pro X. Diana Weynard - cannot download requirements from disk - error code -36 appears after about 30 minutes of download time. Mac Book Pro running OS 10.6.8
I am also using the trial version of FCPX.

You should contact Peachpit about this.
cannot download requirements from disk
Not sure what this means. Do you mean you can't copy from the accompanying disc? In which case the disc might be defective and you should return it to the reseller. At least that's the usual procedure for this.

Is there any training material for SPAU?

Hello experts,
Does anyone know the Nr. of SAP Training material for Transaction SPAU?
Or some other materials which relates to SPAU?
Thanks
RD

Hi Friend.
I have an one and only one answer to your question.
There is one web site I do visit every now and then.
http://books.google.co.in/books?q=transaction+SPAU
here you will get to read most of the books if you have patience to search in depth.
Also, Not recommended but if you want variety of material in form of books, pdfs, zip files for download:
You can go to:
\[removed by moderator\]
and search according to your topic.
I am sure you would find these links helpful.
Auf Weidersehen.
Edited by: Jan Stallkamp on Jun 24, 2008 5:13 PM

Training classes for webdynpro?

Hi,
does anyone know, if or when SAP education will offer training classes for WebDynpro?
I was looking for it on the Market Place, but could not find anything.
Thanks,
Patricia

Hi Patricia,
     Unfortunately, the formalized training for Web Dynpro is still in the beta stages. I was one of the instructors at the first session of RDWAS2 (which focuses on development within the Web Application Server 6.40 including heavy Web Dynpro content) that had external customers in attendance just last week. The class was still in "Beta" mode and not open to the general public. There is a bit of tweaking still to do on the content, but I expect you will see a general scheduling of the course in the near future. (Formalized training can lag a general customer release by up to 6 months, but I think this one will be out more quickly.)
     Hope this helps,
       --Greg

Training manuals for HFM, Planning, and Reporting & Analysis

Does anyone have or know where I can get copies of Hyperion 9.3 training manuals for HFM, Planning, Reporting & Analysis, and Financial Reporting? I want to review and practise them inorder to be able to train others.
Mike

they are really not worth it. You'd better serve your people by reading the user manuals (available on machines that have the programs installed in C:Hyperion or from Help) and practicing.

Uccx 8.02 for vmware

Hi ;
I plan upgrade the uccx 7.x to uccx 8.02. Before doing so, i did install the uccx 8.02 in vmware virtual machine. For the 1st time login to uccx, i choose for the "upgrade from previous uccx release". But when it ask to load the license, i load the actual license file in to, it prompt error with mac address issue. I had changed the mac of the VMware with the right mac. It also given the same error.
I did try with the demo license which downloaded from cisco.com. if fail also.
Anybody who manage install uccx 8.02 in vmware with demo license or actual license ? or how to bypass the license. Eventually just for testing purpose before for actual upgrade. pls advice. Thanks.
rgds
tan

The SWIFT demo license for CCX is broken. I've reported it but it still hasn't been fixed.
CCX 8.0 and beyond are now node locked and use a new Licensing MAC concept. The MAC of the VM is not what the license is keyed against. If you have already generated your LIC file from the licensing tool you will need to open a case with licensing to have it re-hosted. You can see the current licensing MAC using the show status command on the CLI.

Computer based training (CBT) for Hyperion Planning

We would like to know is there any computer based training (CBT) for Hyperion Planning that can be delivered to end users either in DVD video format or CDROM interactive format? We have checked with Oracle and they do not provide such training material except for formal classroom training offered by Oracle University.
Thanks in advance!

JohnGoodwin wrote:
Hi,
As you say Oracle don't provide any such training, Hyperion used to provide some CBT packages for end users but that was a while back and before they were bought out by Oracle.
I think your best best would be try to search on the web for any 3rd party training companies who deal with Hyperion, I am not sure if there will be that many dealing with CBT though.
Cheers
John
http://john-goodwin.blogspot.com/
Thanks John for your advice. I am searching on this matter too but just want to know if there are some reference used by some other Hyperion users.

When will training videos for creative cloud be updated?

Please let us know when new videos will be posted?
I will need good videos for new people on my team.
In general, videos (that as of a few days ago were available through the "Training" link from the Creative Cloud) are old and out of date. They are still advertised in a link to the right as "New Tutorial Videos."
-All videos are for previous interface
Videos with entirely unusable information?
"Recovering Deleted Files in Creative Cloud"
"Selecting, Moving, and Deleting Files in Creative Cloud"
Videos that are mostly accurate, though interface remains different:
"Managing Individual Creative Files in Creative Cloud"
"Sharing and Downloading Files in Creative Cloud"
I have not seen any answers on this topic. Let me know if they already exist.
There were no results for when will training videos for creative cloud be updated?

I posted with screenshots how to Archive and Permanently Files here http://forums.adobe.com/message/5087298#5087298.
If you have questions about how to do specific things let me know and I will post screenshots.

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Transfer cost price from free of charge item to main item but not for VPRS

Hi,
I want to transfer cost price from free of charge item to main item but not for VPRS but for a new Z contidion type.
For CO-PA proposes. Can you help me with This?
Catarina Alves

hi,
transfer of cost from sub item to main item is configured in the delivery to billing copy control for the main item. go to VTFL > select the required item cateogry > here at the bottom you will find a check box Cummulate cost. Tick it.
Not really what you meant COPA purposes. But the pricing conditions are mapped to COPA value fields at KE4I transaction.
regards
sadhu kishore

Change in start date of tax depreciation not for posting in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

UCM/UCCX Training (not for certs)

Similar Messages

Maybe you are looking for