UCS C 240M3 Unknown Protocol Drops

I have a UCS server running NIC teaming to a 3750X stack. I am getting unknown protocol drops on one of the 10 Gig interfaces. The other runs fine. I am wondering if anyone else has run into this issue and what can be done to resolve it.
Thank you
Dave

Hi, Leo :
I don't think it is a duplicate posts ,because my configruration is different , mine is WPA2 with AES-CCM. still has the drop issue.
and I provide more infomation .
thank you .

Similar Messages

Why i get 1356 unknown protocol drops on my 2951 router ?

2951 router is giving a lot of drops when pinging and when i check the output of "sh inter"command i only find 1356 unknown protocol drops.

2951 router is giving a lot of drops when pinging and when i check the output of "sh inter"command i only find 1356 unknown protocol drops.

Unknown protocol drops on switches

Hai,
I am facing a problem with cisco 3850 switch.
4 3850 switches are stacked this is the ios version.
Switch Ports Model              SW Version        SW Image              Mode
     1 56    WS-C3850-48P       03.03.01SE        cat3k_caa-universalk9 INSTALL
*    2 56    WS-C3850-48P       03.03.01SE        cat3k_caa-universalk9 INSTALL
     3 56    WS-C3850-48P       03.03.01SE        cat3k_caa-universalk9 INSTALL
     4 56    WS-C3850-48P       03.03.01SE        cat3k_caa-universalk9 INSTALL
On all interfaces we are getting un known protocol drops.
This is happening only for the ports connected to Cisco IP Phone.
sh int gigabitEthernet 1/0/6
GigabitEthernet1/0/6 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 20bb.c001.b186 (bia 20bb.c001.b186)
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:09, output never, output hang never
Last clearing of "show interface" counters 2d20h
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 20000 bits/sec, 26 packets/sec
5 minute output rate 582000 bits/sec, 54 packets/sec
     1660799 packets input, 1143477736 bytes, 0 no buffer
     Received 11299 broadcasts (9112 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 9112 multicast, 0 pause input
     0 input packets with dribble condition detected
     2420321 packets output, 1763948037 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
******943 unknown protocol drops**********************************************
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out
I tried to troubleshoot the issue with dtp,lldp,cdp...etc...seems that is not the issue
What could be the issue? any clue?
Regards
Deva

Transmit                  GigabitEthernet1/0/6   Receive
            0 Total bytes                           0 Total bytes
            0 Unicast frames                        0 Unicast frames
            0 Unicast bytes                         0 Unicast bytes
            0 Multicast frames                      0 Multicast frames
            0 Multicast bytes                       0 Multicast bytes
            0 Broadcast frames                      0 Broadcast frames
            0 Broadcast bytes                       0 Broadcast bytes
            0 System FCS error frames               0 IpgViolation frames
            0 MacUnderrun frames                    0 MacOverrun frames
            0 Pause frames                          0 Pause frames
            0 Cos 0 Pause frames                    0 Cos 0 Pause frames
            0 Cos 1 Pause frames                    0 Cos 1 Pause frames
            0 Cos 2 Pause frames                    0 Cos 2 Pause frames
            0 Cos 3 Pause frames                    0 Cos 3 Pause frames
            0 Cos 4 Pause frames                    0 Cos 4 Pause frames
            0 Cos 5 Pause frames                    0 Cos 5 Pause frames
            0 Cos 6 Pause frames                    0 Cos 6 Pause frames
            0 Cos 7 Pause frames                    0 Cos 7 Pause frames
            0 Oam frames                            0 OamProcessed frames
            0 Oam frames                            0 OamDropped frames
            0 Minimum size frames                   0 Minimum size frames
            0 65 to 127 byte frames                 0 65 to 127 byte frames
            0 128 to 255 byte frames                0 128 to 255 byte frames
            0 256 to 511 byte frames                0 256 to 511 byte frames
            0 512 to 1023 byte frames               0 512 to 1023 byte frames
            0 1024 to 1518 byte frames              0 1024 to 1518 byte frames
            0 1519 to 2047 byte frames              0 1519 to 2047 byte frames
            0 2048 to 4095 byte frames              0 2048 to 4095 byte frames
            0 4096 to 8191 byte frames              0 4096 to 8191 byte frames
            0 8192 to 16383 byte frames             0 8192 to 16383 byte frames
            0 16384 to 32767 byte frame             0 16384 to 32767 byte frame
            0 > 32768 byte frames                   0 > 32768 byte frames
            0 Late collision frames                 0 SymbolErr frames
            0 Excess Defer frames                   0 Collision fragments
            0 Good (1 coll) frames                  0 ValidUnderSize frames
            0 Good (>1 coll) frames                 0 InvalidOverSize frames
            0 Deferred frames                       0 ValidOverSize frames
            0 Gold frames dropped                   0 FcsErr frames
            0 Gold frames truncated
            0 Gold frames successful
            0 1 collision frames
            0 2 collision frames
            0 3 collision frames
            0 4 collision frames
            0 5 collision frames
            0 6 collision frames
            0 7 collision frames
            0 8 collision frames
            0 9 collision frames
            0 10 collision frames
            0 11 collision frames
            0 12 collision frames
            0 13 collision frames
            0 14 collision frames
            0 15 collision frames
            0 Excess collision frames
LAST UPDATE 120931740 msecs AGO

Unknown protocol drops with AP2700

We've been deploying some AP 2700 within our offices and been observing some "unknown protocol drops" on the switchports where the AP's are connected.
The AP's are associated to a 7500 wireless controller, running 8.0.100.0 code. The AP's are in lightwight configuration with flexconnect configuration (4 vlans/SSID) associated.
On the switch port, the port has the following configuration :
description Cisco AP
switchport mode trunk
load-interval 30
spanning-tree portfast
I also specified the allowed vlans, based on the vlans that were mapped on the Flexconnect group and I still get some unknown protocol drops on the AP ports.
Does anybody know what this could relate to ?

See whether those are related to jumbo frames ?
https://tools.cisco.com/bugsearch/bug/CSCun12965
HTH
Rasika
**** Pls rate all useful responses ****

Unknown protocol drops

We started using Cisco 3850 switches. We are seeing unknown protocol drops on 10gb and 1gb uplinks. We have 3750x switches that have the same config. The 3750s are not showing these drops. What would cause these unknown protocol drops? It does not appear to be a fiber or SFP issue. And it does not seem to be affecting the normal traffic.
Sent from Cisco Technical Support iPhone App

Hello lindseye444,
Please have a look at this bug:
https://tools.cisco.com/bugsearch/bug/CSCuh47950/?reffering_site=dumpcr
Symptom:
when a routing protocol packet (such as but not limited to EIGRP) is received on a 3850 configured as an L2 device, interfaces receiving these packets will increment "unknown protocol drops"
This is a cosmetic issue and will not affect the routing protocols involved.
Conditions:
EIGRP or other routing protocol packets are received by a Catalyst 3850 that is configured as an Layer2 switch.
Workaround:
Once an SVI (switch virtual interface: for example "interface vlan 10") with an IP address is configured on the 3850 for the vlan in question the "unknown protocol drops" counter stops incrementing
Further Problem Description:
L3 routing protocol packets might be punted to CPU received on a L2 switchport, if no SVI is presented, unknown protocol drops will increase on the physical interface.
Regards.

Vlan interface "unknown protocol drops"

Hello
I have a satellite office that connects via VPN back to my Corporate office.
The VPN is terminated on an Cisco 891.
I have received complaints from the user's there that their Citrix session hangs on them. They can then reconnect the session and
find the session was still going as they started back where they left off. There are several pc's that experiewnce the same issue.
The Citrix server has been checked out. The PC's have been checked out and re-imaged just to make sure.
I see on the Vlan interfacfe on the 9891 there are alot of unknown protocol drops.
What does this mean and could it be the cause of the session hang?
Vlan10 is up, line protocol is up
Hardware is EtherSVI, address is 4403.abcd.efgh (bia 4403.abcd.efgh)
Internet address is 10.x.221.1/24
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:05, output never, output hang never
Last clearing of "show interface" counters 22:43:53
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
     218197 packets input, 33432444 bytes, 0 no buffer
     Received 6568 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     189384 packets output, 79892307 bytes, 0 underruns
     0 output errors, 0 interface resets
     7433 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If you're running Citrix across a VPN, that crosses the Internet (?), I would be first concerned about transient latency and/or packet drops. I would also be concerned whether your VPN has been configured to avoid packet fragmentation.

Virtual Mail Setup - imapd-ssl error unknown protocol

Hi,
I have been relentlessly trying to setup my first email server and I think that I am almost there. I have been following the guide at:
https://wiki.archlinux.org/index.php/Simple_Virtual_User_Mail_System
I have followed it step by step and I'm 99% sure that I didn't miss a thing when setting it up.
However, I cannot login to my roundcube mail. It just times out.
This is the error that pops up in /var/log/mail.log:
mail imapd-ssl: couriertls: accept: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol
this is the contents of /etc/authlib/authmysqlrc:
##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
# Copyright 2000-2007 Double Precision, Inc. See COPYING for
# distribution information.
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
# authmysqlrc created from authmysqlrc.dist by sysconftool
# DO NOT INSTALL THIS FILE with world read permissions. This file
# might contain the MySQL admin password!
# Each line in this file must follow the following format:
# field[spaces|tabs]value
# That is, the name of the field, followed by spaces or tabs, followed by
# field value. Trailing spaces are prohibited.
##NAME: LOCATION:0
# The server name, userid, and password used to log in.
MYSQL_SERVER localhost
MYSQL_USERNAME postfix_user
MYSQL_PASSWORD *******MY PASSWORD*******
##NAME: SSLINFO:0
# The SSL information.
# To use SSL-encrypted connections, define the following variables (available
# in MySQL 4.0, or higher):
# MYSQL_SSL_KEY /path/to/file
# MYSQL_SSL_CERT /path/to/file
# MYSQL_SSL_CACERT /path/to/file
# MYSQL_SSL_CAPATH /path/to/file
# MYSQL_SSL_CIPHERS ALL:!DES
##NAME: MYSQL_SOCKET:0
# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the
# filesystem pipe used for the connection
# MYSQL_SOCKET /var/mysql/mysql.sock
##NAME: MYSQL_PORT:0
# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to
# connect to.
MYSQL_PORT 3306
##NAME: MYSQL_OPT:0
# Leave MYSQL_OPT as 0, unless you know what you're doing.
MYSQL_OPT 0
##NAME: MYSQL_DATABASE:0
# The name of the MySQL database we will open:
MYSQL_DATABASE postfix_db
#NAME: MYSQL_CHARACTER_SET:0
# This is optional. MYSQL_CHARACTER_SET installs a character set. This option
# can be used with MySQL version 4.1 or later. MySQL supports 70+ collations
# for 30+ character sets. See MySQL documentations for more detalis.
# MYSQL_CHARACTER_SET latin1
##NAME: MYSQL_USER_TABLE:0
# The name of the table containing your user data. See README.authmysqlrc
# for the required fields in this table.
MYSQL_USER_TABLE mailbox
##NAME: MYSQL_CRYPT_PWFIELD:0
# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined. Both
# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext
# passwords go into MYSQL_CLEAR_PWFIELD. Cleartext passwords allow
# CRAM-MD5 authentication to be implemented.
MYSQL_CRYPT_PWFIELD password
##NAME: MYSQL_CLEAR_PWFIELD:0
# MYSQL_CLEAR_PWFIELD clear
##NAME: MYSQL_DEFAULT_DOMAIN:0
# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
# we will look up 'user@DEFAULT_DOMAIN' instead.
# DEFAULT_DOMAIN example.com
##NAME: MYSQL_UID_FIELD:0
# Other fields in the mysql table:
# MYSQL_UID_FIELD - contains the numerical userid of the account
MYSQL_UID_FIELD 5000
##NAME: MYSQL_GID_FIELD:0
# Numerical groupid of the account
MYSQL_GID_FIELD 5000
##NAME: MYSQL_LOGIN_FIELD:0
# The login id, default is id. Basically the query is:
# SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid'
MYSQL_LOGIN_FIELD username
##NAME: MYSQL_HOME_FIELD:0
MYSQL_HOME_FIELD "/home/vmail"
##NAME: MYSQL_NAME_FIELD:0
# The user's name (optional)
MYSQL_NAME_FIELD name
##NAME: MYSQL_MAILDIR_FIELD:0
# This is an optional field, and can be used to specify an arbitrary
# location of the maildir for the account, which normally defaults to
# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD).
# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this
# out.
MYSQL_MAILDIR_FIELD maildir
##NAME: MYSQL_DEFAULTDELIVERY:0
# Courier mail server only: optional field specifies custom mail delivery
# instructions for this account (if defined) -- essentially overrides
# DEFAULTDELIVERY from ${sysconfdir}/courierd
# MYSQL_DEFAULTDELIVERY defaultdelivery
##NAME: MYSQL_QUOTA_FIELD:0
# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally
# specify a maildir quota. See README.maildirquota for more information
MYSQL_QUOTA_FIELD quota
##NAME: MYSQL_AUXOPTIONS:0
# Auxiliary options. The MYSQL_AUXOPTIONS field should be a char field that
# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
# pairs. These names are additional attributes that define various per-account
# "options", as given in INSTALL's description of the "Account OPTIONS"
# setting.
# MYSQL_AUXOPTIONS_FIELD auxoptions
# You might want to try something like this, if you'd like to use a bunch
# of individual fields, instead of a single text blob:
# MYSQL_AUXOPTIONS_FIELD CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup)
# This will let you define fields called "disableimap", etc, with the end result
# being something that the OPTIONS parser understands.
##NAME: MYSQL_WHERE_CLAUSE:0
# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary
# fixed string that is appended to the WHERE clause of our query
# MYSQL_WHERE_CLAUSE server='mailhost.example.com'
##NAME: MYSQL_SELECT_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do a SELECT operation on database, which should return fields
# in order specified bellow:
# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
# The username field should include the domain (see example below).
# Enabling this option causes ignorance of any other field-related
# options, excluding default domain.
# There are two variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. These variables are:
# $(local_part), $(domain), $(service)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(service) will expand out to the service being authenticated: imap, imaps,
# pop3 or pop3s. Courier mail server only: service will also expand out to
# "courier", when searching for local mail account's location. In this case,
# if the "maildir" field is not empty it will be used in place of
# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
# authenticated ESMTP.
# This example is a little bit modified adaptation of vmail-sql
# database scheme:
# MYSQL_SELECT_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# CONCAT('{MD5}', popbox.password_hash), \
# popbox.clearpw, \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# domain.quota, \
# CONCAT("disableimap=",disableimap,",disablepop3=", \
# disablepop3,",disablewebmail=",disablewebmail, \
# ",sharedgroup=",sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_ENUMERATE_CLAUSE:1
# {EXPERIMENTAL}
# Optional custom SQL query used to enumerate accounts for authenumerate,
# in order to compile a list of accounts for shared folders. The query
# should return the following fields: name, uid, gid, homedir, maildir, options
# Example:
# MYSQL_ENUMERATE_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# CONCAT('sharedgroup=', sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_CHPASS_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do an UPDATE operation on database. In other words, it is
# used, when changing password.
# There are four variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. There variables are:
# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(newpass) contains plain password
# $(newpass_crypt) contains its crypted form
# MYSQL_CHPASS_CLAUSE UPDATE popbox \
# SET clearpw='$(newpass)', \
# password_hash='$(newpass_crypt)' \
# WHERE local_part='$(local_part)' \
# AND domain_name='$(domain)'
I have been reading around about that error to no avail.
i have extension=openssl.so uncommented in /etc/php/php.ini and round cube says my openssl is fine.
Any help would be much appreciated!
kush
Last edited by kush (2012-01-05 16:49:18)

Hey Kush I am having the same issue, did you ever get it working???

Web.show_document gives FRM-92020 error unknown protocol

Hi I am hoping someone can help.
I am using web.show_document in forms 10g and get an FRM-92020 unknown protocol error. The URL I am passing starts fddl:// this is a legitimate call to an Electronic Document management system image search engine. The URL works 100% outside of Forms, i.e cut and paste into an internet Explorer address bar. The problem is with web.show_document parsing for 'known' protocols.
Is there any way I can stop this validation from taking place. Incidentally I can HOST out and call iexplore with the URL and again that works (client Server), however we do not have webutil installed for me to do the webutil equivalent in our live environment!
Any help will be great, thanks in advance.
Trev.

Hi Francois,
thanks for replying.
Yes I am using '_blank' as the second parameter.
The URL I am passing is dynamically genreated and held in a variable. My call is:
web.show_document(l_url,'_blank');
the url evaluates to something like below:
l_url := 'fddl://fmhsqlserv/filedirector/...........................'
I am struggling to find any documentation on web.show_document that will help with this scenario. It is frustrating as the url is 100% OK, its just the evaluation of it by the function call.
Any help or ideas are welcome.
Trev

Invalid soap address, unknown protocol jms

Hi, All,
I try to create a web service project based on a WSDL which soap based on JMS as following:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="AsyncBusiness"
     targetNamespace="http://www.alsb.com/AsyncBusiness/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns:tns="http://www.alsb.com/AsyncBusiness/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <types>
          <xsd:schema targetNamespace="http://www.alsb.com/AsyncBusiness/"
               xmlns:order="http://www.alsb.com/order/">
               <xsd:import namespace="http://www.alsb.com/order/"
                    schemaLocation="order.xsd" />
               <xsd:element name="submitOrder" type="order:Order" />
          </xsd:schema>
     </types>
     <message name="submitOrder">
          <part element="tns:submitOrder" name="submitOrder" />
     </message>
     <portType name="AsyncBusiness">
          <operation name="submitAsyncOrder">
               <input message="tns:submitOrder" />
          </operation>
     </portType>
     <binding name="AsyncBusinessSOAP" type="tns:AsyncBusiness">
          <soap:binding style="document"
               transport="http://www.openuri.org/2002/04/soap/jms" />
          <operation name="submitAsyncOrder">
               <soap:operation
                    soapAction="http://www.alsb.com/AsyncBusiness/submitOrder" />
               <input>
                    <soap:body parts="submitOrder" use="literal" />
               </input>
          </operation>
     </binding>
     <service name="AsyncBusiness">
          <port binding="tns:AsyncBusinessSOAP" name="AsyncBusiness">
               <soap:address
                    location="jms://192.168.48.1:7001/AsyncOrderSelf_WS/AsyncBusiness?URI=jms.WebServiceQueue" />
          </port>
     </service>
</definitions>
the problem is when I generate web service based on that, error found: invalid soap address, unknown protocol jms. How can I make it work?
I'm using workshop 10.3 for weblogic. Thanks in advance.
Best Regards,
Bill
Edited by: Bill Cao on May 20, 2009 11:13 AM

Bill,
Soap Address should always should be standard.
But you can change the action type under the wls binding part
for example I will provide one sample and it work perfectly at my end.



<wsdl:binding name="SampleJMSSoapBinding" type="invws:SamplePort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/jms" />
<wsdl:operation name="DeleteParty">
<soap:operation soapAction="http://xmlns.oracle.com/communications/webservice/DeleteParty" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
<wsdl:fault name="InventoryFault">
<soap:fault name="InventoryFault" use="literal" />
</wsdl:fault>
<wsdl:fault name="ValidationFault">
<soap:fault name="ValidationFault" use="literal" />
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>



<wsdl:service name="Sample">
<wsdl:port name="SampleHTTPPort" binding="invws:SampleHTTPSoapBinding">
<soap:address location="http://localhost:7001/Sample/SampleHTTP" />
</wsdl:port>
<wsdl:port name="SampleJMSPort" binding="invws:SampleJMSSoapBinding">
<soap:address location="jms://localhost:7001/Sample/SampleJMS?URI=inventoryWSQueue" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
let me know whether this will help any where.
Regards,
Kal.

URL object with https string throws malformed url exception: unknown protocol: https

In WebLogic I am trying to connect to an HTTPS url by passing that url
string into the contructor for URL object. This throws a Malformed URL
Exception : unknown protocol: https.
When i run this same block of code outside of weblogic (in a stand-alone
app), it runs perfectly. (not exceptions when creating the URL object).
why do i get this exception in weblogic?
could weblogic be loading its own URL class rather than the java.net.URL
class (which supports ssl)? if so how do i override that classloading?
is there a weblogic security "feature" that prevents opening an ssl
connection?
thanks for any help
mike
[email protected]

You need to modify your weblogic.policy file to allow you to change the
the property java.protocol.handler.pkgs ... and any other properties
that you may probably change using JSSE (for example:
javax.net.ssl.trustStore for storing certificates of servers that you
want to connect to from WLS )
Regards,
John Salvo
Michael Harrison wrote:
>
thanks for the help dennis, but still get the "unknown protocol https".
the URL object sees that the URLStreamHandler ==null and get the value for
java.protocol.handler.pkgs (which should be
com.sun.net.ssl.internal.www.protocol) then it tries to load that class. i
believe that the GetPropertyAction("java.protocol.handler.pkgs","") is not
returning com.sun.net.ssl.internal.www.protocol. therefore the class is not
getting loaded
i think that my classpath is set up properly for classpath and
weblogic_classpath so i think that i me calling
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol"); is not effective.
do you know anyway i can trouble shoot this.
thanks
mike
Dennis O'Neill <[email protected]> wrote in message
news:39d23c28$[email protected]..
Https is an add-in so to speak. Try this before you create your url:
System.setProperty ("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
// add the default security provider (again, in JSSE1.0.1)
int iap = java.security.Security.addProvider(new
com.sun.net.ssl.internal.ssl.Provider() );
dennis

SUM not working today: "Unknown protocol" message

Today, I cannot use SUM on Solaris 10 u8 x86. I get a message "Unknown protocol: defaultUpdateSource". This happens every time I click Check for Updates.
Are the update servers down?

Please remove all sensitive data out of the output path. Then run the attached suc script and let us see the output or better still open a support case if possible. However, we are aware that two days ago, the update servers had some maintenance window

Unknown protocol when uploading to flickr

I have been authorizing and using the upload to flickr for years, but now it comes back with
"Unknown protocol "
when I try to Authorize it and this is the same in Chrome, Firefox, Internet explore and Opera
Any help please, the only thing I think has changed in the 5.7 update in lightroom
Peter

awalker584
At this time can you upload this file or any video file to Facebook without using Premiere Elements?
Do you have any of those videos that uploaded to Facebook successfully previously from Premiere Elements so that you can try uploading them again as part of troubleshooting the present issue?
ATR

Help me! digester has error MalForme URL ".." unknown protocol: classloader

I have used validator which link to digester and error occured like this..
13-04-07 08:18:59.840 ERROR - java.lang.IllegalArgumentException: Malformed URL
'classloader:/org/apache/commons/digester/xmlrules/digester-rules.dtd' : unknown protocol: classloader :(ValidatorOperator.java:71)[HttpRequestHandler-5984162]
13-04-07 08:18:59.855 DEBUG - ******************************************* :(ValidatorOperator.java:72)[HttpRequestHandler-5984162]
this line comes from new ValidatorResources(inputstream in)
which I already checked that inputstream is not null
Please help!!

I just think that it's related to what an URL is and that whatever you provided there isn't a valid one because there is no such protocol as "classloader". Which the error message already said.
From the URL API docs:
Protocol handlers for the following protocols are guaranteed to exist on the search path :-
http, https, ftp, file, and jar
Further:
Protocol handlers for additional protocols may also be available.
In other words, if there actually is a protocol named "classloader", you will have to have some JAR in the classpath that'll provide that information. Read the Digester docs to find out which one that might be.

Unknown protocol: classpath when SOA server parses WSDL of ADF Web Services

We used ADF 11.1.1.4 to create synchronous web services (via Application Module Service Interface). Everything worked fine, we were able to created SOA composites that references those ADF web services and deploy them to SOA server successfully.
However, since last weekend, all SOA composites that reference the ADF web services started to give the following exception when loaded during SOA server startup:
[2012-01-17T14:27:35.373-05:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@39ed0f9] [userId: <anonymous>] [ecid: 0000JJh8SfNFg4aPXMg8xb1F5Sgf000001,0] [APP: soa-infra] Unable to register service.[[
oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/deployed-composites/default/MainOrch100000000002001Composite_rev1.0/SOAAMServiceRef.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/deployed-composites/default/MainOrch100000000002001Composite_rev1.0/SOAAMServiceRef.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.fabric.composite.model.CompositeModel.loadImports(CompositeModel.java:379)
at oracle.fabric.composite.model.CompositeModel.getWSDLManager(CompositeModel.java:198)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.getDefinition(WebServiceEntryBindingComponent.java:240)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:147)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:98)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:161)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:92)
at oracle.integration.platform.blocks.deploy.CompositeDeployerImpl.deploy(CompositeDeployerImpl.java:149)
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:932)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseDefinition(WSDLReaderImpl.java:808)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:708)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:656)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:368)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:911)
... 32 more
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:929)
... 37 more
Caused by: java.net.MalformedURLException: unknown protocol: classpath
at java.net.URL.<init>(URL.java:574)
at java.net.URL.<init>(URL.java:465)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:901)
... 37 more
Any suggestion about what might be causing this issue?
Thanks,
Fang

Just thought to put the solution here, in case anyone else that uses SOA encounter the same issue.
It turns out the setDomainEnv.cmd file for SOA server was corrupted, so that the list of PROTOCOL_HANDLERS are bad. It should have
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS%;oracle.fabric.common.classloaderurl.handler;oracle.fabric.common.uddiurl.handler;oracle.bpm.io.fs.protocol
But something changed it to be only have oracle.mds.net.protocol, Therefore the classpath protocol could not be recognized by SOA server. Once we corrected the PROTOCOL_HANDLERS, this issue is gone.

Unknown protocol: jndi java.lang.Throwable: unknown protocol: jndi

hi,
i use WLI 8.1 sp6. in my application i have a JMS Queue to publish the message from first jpd and in the second JPD im reading the message using JMS EG. we have managed servers (MS1 and MS2) and 2 JMS Server. when the message is published to MS1 server its throwing the following exception
<unknown protocol: jndi
java.lang.Throwable: unknown protocol: jndi
at com.bea.wlw.runtime.core.control.jmscontrol.JMSWrapper.lookupConnectionFactory(JMSWrapper.java:200)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSWrapper.getConnectionFactory(JMSWrapper.java:169)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSWrapper.ensureJNDILookupCache(JMSWrapper.java:127)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSWrapper.acquirePooledJMSConnectionAndSession(JMSWrapper.java:64)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSWrapper.getSession(JMSWrapper.java:325)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlMsg.createTextMsg(JMSControlMsg.java:115)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlMsg.createMessage(JMSControlMsg.java:72)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlImpl.createMessage(JMSControlImpl.jcs:1293)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlImpl.handleInvoke(JMSControlImpl.jcs:1279)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlImpl.invokeInternal(JMSControlImpl.jcs:377)
at com.bea.wlw.runtime.core.control.jmscontrol.JMSControlImpl.invoke(JMSControlImpl.jcs:310)
at com.bea.control.WliJMSControlImpl.invoke(WliJMSControlImpl.jcs:205)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:377)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:433)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:406)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:388)
at $Proxy64.sendTextMessage(Unknown Source)
but in MS2 its working perfectly. Any help in solving this issue would be appreciated.
thanks,
Anees.

Check your java.security file
probably in your line to set parameter login.config.url.1=files:c:/yourpath/xxx.conf you removed the "files" protocol to indicate the path.
example
login.config.url.1=c:/yourpath/xxx.conf
with this you get the error
"java.lang.SecurityException: unknown protocol: c".
Regards,
Alexandre Gonzalez

UCS C 240M3 Unknown Protocol Drops

Similar Messages

Maybe you are looking for