UCS C220 with raid v6 problem(not support any CUCM versions)

pease help me in the below problem
after installing UCS C220 with raid 6, i tried to make new v-machine for CUCM but it gives me the below message:
The hardware you are using is not supported for this product. installation will now halt.

Are you using the CUCM OVA?
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

Backend System with Release 701 are not supported

SRM 5.0
Extended Classic Scenario
CCM 2.0
When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
Backend System with Release 701 are not supported
Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
Can any one advice.
Regards,
Jayoti
Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

"Backend systems with Release 701 are not supported " - ECC 6.0 to SRM 5.0

Hi ,
I have 2 doubts .
1. We are getting Error "Backend systems with Release 701 are not supported " while replicating vendors from ECC 6.0 backend system to SRM 5.0 system.
There are some notes on simillar topic but are not for SRM 5.0 ,suggested on SDN. an anyone please suggest what need to be done for the same.
2. Can we replicate Vendor Master Data with Contact Person from SRM to ECC system ? if yes, How ?
Regards
Narendra

answer 1:-
Note 1372175 - BBP_VENDOR_GET_DATA_JOB "Back-End Systems Not Supported"
On recent upgrade of the ECC back-end system to release '701' the program BBP_VENDOR_GET_DATA_JOB is getting errored out. If you are using SRM 5.0 , SRM_SERVER 550 with ECC backend Release 701 you encounter the above reported problem
Other terms
Vendor Replication Job, Release 701, Backend not supported, BBP_VENDOR_GET_DATA_JOB
Reason and Prerequisites
The program does not consider the release 701
remote_release EQ '700' OR remote_release EQ '701'.
OR
bbp_vendor_get_data - DEBUG what ois the remote_release 700 or 701?
Muhtu

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

"Charging with this accessory is not supported" But it's my iPhone charger?

When I try to connect my phone to the iPhone charger in the wall socket, and also the USB cable to my iMac it say's "Charging with this accessory is not supported".
What's the deal?
Also when I make calls, I get a freaky alien noise nearly everytime. I can hang up and recall the number and it will work fine, but almost every first call is like this, and no doubt I'm getting charged for it too.
Any help appreciated.

I had a Belkin charger and cord for the iPod Touch 3G because Apple failed to include a necessary AC adapter to charge one of their products, which I thought was cheap being that it is a 300+ device. Anyways, when I plugged my new iPhone 4 in, I could not turn on the sound and it didn't have any sound. When I used the cable that came with the iPhone, I was able to get my sound back. The problem is with the cord. If it is not completely compatible with Apple then you will not be able to charge the iPhone.

Raid Utility Error Message "raid utility is not supported on this computer"

I am not doing anything that I know of, but Raid Utility keeps opening up on its own, and a message pops up multiple times a day telling me "raid utility is not supported on this computer"
Anyone have any idea how to fix this?

Network startup is if you want to start your macbook using a network drive.
Keep your startup settings at your current drive.
Raid utility doesn't apply to you since you only have one hard drive installed, unless you installed another hard drive in your optical bay.
Fibre Channel is another type of hard drive connection via network connection.
You can't access things you don't have installed in your macbook. Those are there in case you decide to have a network drive start up options, a raid configuration of a fibre channel network drive.

BBPGETVD - error:backend systems with release 700 are not supported

Hi,
When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
I get the error message"backend systems with release 700 are not supported"
Is anyone have Idea what is wrong? and how can fix it?
Thanks,
Rachel

Yossi,
I believe that standard transaction does not work with ECC 6.0. The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail). So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.). This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
If you have more questions on this let me know.
Take care,
Stephen

'Backend systems with Release 701 are not supported'

while BBPGETVD transaction is run below error is seen,
'Backend systems with Release 701 are not supported'
Please help to resolve it.

Hi
What is your backend system ECC version?
What is the configuaration in Define back end system?
Note 1313972 - BBPGETVD: Backend system latest release not supported
br
muthu

BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Cvs[aborted]: -t/-f wrappers not support by this version of cvs

In the previous version of XCode, in order to get cvs working, I followed this tutorial:
http://maczealots.com/tutorials/xcode-cvs/
In it, I modified the cvswrappers file and everything worked fine. Since upgrading to XCode3, when I try to use cvs, I get the error message:
cvs[aborted]: -t/-f wrappers not supported by this version of cvs
I've nosed around in the cvswrappers file but it isn't obvious to me what I need to change to make cvs work again. Can anyone provide me with a clue? Thanks.

Roger Banks wrote:
In the previous version of XCode, in order to get cvs working, I followed this tutorial:
http://maczealots.com/tutorials/xcode-cvs/
The one from July 2004?
I've nosed around in the cvswrappers file but it isn't obvious to me what I need to change to make cvs work again. Can anyone provide me with a clue? Thanks.
Blow away your repository and start fresh. Don't use wrappers at all. Those are only for Classic MacOS.
You may find some advice (directly from Apple) telling you otherwise, but don't believe it. CVS with all the default settings works just fine. Xcode has some problems with SCM in general, but CVS has nothing to do with it.

Why google toolbar and bitcomet plugin is not supporting in new versions?

bitcomet plugin was supported in firefox 4,5 version but not supporting in new versions after that, similarily google toolbar also...

Google is not supporting the Google Toolbar after Firefox 4.0 which is effectively saying they are not supporting it at all since it did not work properly before and Firefox 4 itself is not supported by Mozilla.
Bit comment was probably prevented for your safety.
'''The Google Toolbar is no longer supported by Google in Firefox 5 and up''', you may be able to get what you want from it for a limited time, the directions to install the Google Toolbar were posted before Google actually announced dropping support.
*Enable Google Toolbar in Firefox 5<br>http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
*the-edmeister posted a brief evaluation of the situation<br>https://support.mozilla.com/en-US/questions/841736
In any case you can find several alternative solutions, and you can start working on them now, see
* "'''Using Google Toolbar features without toolbars'''" <br>http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
If this solves your problem then mark as solved, if there is an aspect that is not covered directly or through searching extensions on that page, or other searching that you can try, please indicate what is not covered and describe what it does and we will try to help you with a Firefox solution. Don't expect to see anything that is an exact replacement of a Google Toolbar feature. Likewise if you have additional solutions not covered others would likely want to hear about them.
Summary: held hostage to the Google Toolbar add-on by Google
:https://support.mozilla.com/en-US/questions/860628#answer-229290

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

UCS C220 with raid v6 problem(not support any CUCM versions)

Similar Messages

Maybe you are looking for