UCS C260M2: How to boot from local hdd (RAID) ?

Hi all,
i just integrated a C260 to UCS Manager. (converted from standalone to UCSM)
Then i tried to push a serviceprofile on it
-> got config error "Local disk config destructive to current storage There are not enough resources overall"
Thats okay because after that I was told that there was an image installed on the C260M2 in standalone mode.
So now I tried to boot the server from the installed image, but I can not boot from the local disks.
It always boots the UCS-SCU (Server Configuration Utility)
I tried watched for any solutions so I disabled all the boot options in the BIOS, now I get the error "no boot device found"
Unfortunately I can not find any boot option to boot from local disks.
I can see following RAID Configuration in "inventory > rack mounts > servers > server 1 > Inventory > Storage
The 16 Disks (10 SAS and 6 SSD) are controlled via 2 RAID Controllers, each one controlls 8 Disks (5 SAS and 3 SSD) in RAID 0 striped.
- Is there a way to boot from the local HDD with the standalone mode installed image ?
https://supportforums.cisco.com/message/3810051#3810051 does not work, because of no internal RAID Controllers, both are PCIe Raid Controllers.
- Have I lost my preinstalled image, as I converted from standalone to UCSM integraded ?
Best regards
Alois

Hello Alois,
First of all, rack server can have only one RAID controller when it is managed by UCSM.
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011110.html#d180135e3777a1635
------------ snip --------------
Maximum of One RAID Volume and One RAID Controller in Integrated Rack-Mount Servers
A rack-mount server that has been integrated with Cisco UCS Manager can have a maximum of one RAID volume irrespective of how many hard drives are present on the server.
All the local hard drives in an integrated rack-mount server must be connected to only one RAID Controller. Integration with Cisco UCS Manager does not support the connection of local hard drives to multiple RAID Controllers in a single rack-mount server. We therefore recommend that you request a single RAID Controller configuration when you order rack-mount servers to be integrated with Cisco UCS Manager.
In addition, do not use third party tools to create multiple RAID LUNs on rack-mount servers. Cisco UCS Manager does not support that configuration.
I hope service profile association has failed without making any changes to RAID configuration and it is currently operating as standalone rack server.
If yes, check if you have Flexflash card installed and SCU partition is enabled. If yes, you can disable it.
Are the two RAID controllers listed in boot order menu ?
Is RAID array ( virtual drive ) is in boot list ?
Padma

Similar Messages

  • Mobo Support for booting from USB hdd

    Hi,
    I have a K8N Diamond.
    How can I check whether my mobo can support booting from USB hdd?
    I know it can boot from the USB-CDROM.
    If not, do I need a bios update?

    Quote from: Stu on 21-January-08, 00:38:45
    How to identify your BIOS and m/b version
    But please don't go flashing your BIOS just for the sake of doing so.
    Your USB HDD will be listed under Hard Disks in BIOS, there won't be a USB-HDD option
    Wow, thanks for the link and the pointer. I've found out where the USB hdd is now.
    I won't flash my bios for the sake of that thanks to you, but I'm upgrading to a Dual-Core soon and I realised my bios is w7100nms v1.0.
    So I have to flash my bios soon. Any tips regarding this?

  • How to boot from USB flash drive - Portege R500

    Hi,
    I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
    Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
    So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
    Any help would be really appreciated

    Hi
    As far as I know it should be possible to boot from USB FDD
    Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
    Generally you could try to press F12 button when notebook powers up.
    Then a boot menu should appear on the display and you should see all bootable devices.
    PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
    Greets

  • Help please: how to boot from clone/external hard drive because "disk cannot be partitioned because some files cannot be moved"?

    MBP Retina 15" MID 2014 2.5Ghz
    OS X Yosemite 10.10
    I have a external HDD and want to erase and restore my laptop so I can install windows via Bootcamp Assistant but I don't know how to boot from a clone to fix the issue and am not sure if when I erase and restore I will still have Yosemite 10.10? I have no way to reinstall the OS if I lose it. An average user friendly guide would be greatly appreciated please

    I do not think you have to erase your MacBook's disk in order to install Windows. First of all you can try a few things before formatting the disk.
    The first thing you should do is to check that your MacBook Pro's drive is OK with Disk Utility (in /Applications/Utilities). After opening it, choose "Macintosh HD" in the sidebar and press "Verify Disk". If it gives you any error, you will have to boot your Mac in OS X Recovery (press Command and R keys while your Mac is starting up) to repair Macintosh HD (the steps are the same but pressing "Repair Disk" instead of "Verify Disk").
    After you have repaired the drive, boot up in OS X and try partitioning the drive again with Boot Camp Assistant. If it does not work, you will have to format the drive and reinstall OS X, but I will give you these steps only if this does not work.

  • How To Boot From CD in XP Pro?

    I want to boot from disc so I can install a new Vista instead of XP, but I can't figure out how to boot from disc at start up. When I choose to boot from my windows HDD, it doesn't give any chance to boot from disc (no "press any key" or bios)....help?
    Message was edited by: kimbahpnam

    Hi,
    with the Vista CD inserted reboot your Mac and hold down the 'Option/Alt'-key.
    In the following Selection Screen farthest to the right should be an icon of a CD labelled "Windows".
    Click on it and your Mac should boot from the CD.
    If the CD-icon is not shown, then most likely the Vista CD isn't bootable for whatever reason.
    Regards
    Stefan

  • 1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

    FYI....boot from SAN is required for physical server (T4-1) (not OVM).
    1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
    The SAN disks allocated are visible in ok prompt. below is the output.
    (0) ok show—disks
    a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
    b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
    e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
    d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
    e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
    f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
    g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
    h) /iscsi—hba/disk
    q) NO SELECTION
    valid choice: a. . .h, q to quit c
    /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
    Type “Y ( Control—Y ) to insert it in the command line.
    e.g. ok nvalias mydev “Y
    for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
    (0) ok set—sfs—boot
    set—sfs—boot ?
    We tried selecting a disk and applying sfs-boot at ok prompt.
    Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
    2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
    As we know that ZFS is the default filesystem in Solaris 11.
    We have seen in the Oracle documentation that for rpool below are recommended:
    - A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
    - Create root pools with slices by using the s* identifier.
    - ZFS applies an EFI label when you create a storage pool with whole disks.
    - In general, you should create a disk slice with the bulk of disk space in slice 0.
    I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
    Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

    Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
    I have seen in the Oracle documentation that for rpool below are recommended:
    - A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
    - Create root pools with slices by using the s* identifier.
    - ZFS applies an EFI label when you create a storage pool with whole disks.
    - In general, you should create a disk slice with the bulk of disk space in slice 0.

  • How to Boot From an External HD

    I am still pondering getting a mini - I know that I will want a much larger hard drive (since I want to use it for media and will keep tons of video and music on it). I would like to know how to boot from an external hard drive. I've searched google, the forums, and apple support, and see people mention it all the time, but can't find out how to do it, etc. Is it just like running off my normal HD but all the files are kept on the external (so I could still access files thru itunes, etc.)?
    Also, I would like to get a 500GB+ drive to keep my files on, and was wondering if people had recomendations. Brands, USB 2.0 or Firewire, etc.
    Apologies if this is a novice question - but I can't seem to find answers anywhere.
    Thanks in advance.

    Firstly, it is certainly possible to boot from an external drive, so what you plan is not only feasible, but since the external would be faster than the internal drive, also rather beneficial to the efficient running of the mini - meaning, the system will be notably faster in use.
    In my view, the best option is an external firewire drive, not USB. The reason is that FW has it's own dedicated controller while USB doesn't. In effect, it means that FW data transfer speeds are stable and consistent, while USB rates vary widely, depending on what else the system is doing.
    Once you have your external drive connected, the easiest way to make it bootable is to copy your existing MacOS install from the internal drive using software such as Carbon Copy Cloner (downloadable from www.versiontracker.com). This will avoid having to do a lengthy reinstall. Once MacOS is copied, then open System Preferences, and the Startup Disk preference pane, and click on the external drive icon. The next restart will then be directed to the external.
    Once you have booted from the external drive, you use it just as you would an internal, and MacOS will treat it as the boot volume, including by default, placing your user account folders on it, including your documents, music etc.

  • How to boot from second hard drive in Ultra Bay

    Hi all!
    I recently installed a SSD drive as my primary disk and mounted my old hard drive in the Ultrabay. It still has all its original partitions, which are:
    Windows "System Drive"
    Windows OS
    Ubuntu
    Windows Programs
    General Data
    I can access 1., 2., and 5. from within my new Win7  install on the SSD.
    My SSD drive is fully encrypted with TrueCrypt.
    Is there any way I can boot from the HDD in the Ultrabay? I still want to access some of the old data on the system drive.
    Ideally, there would also be a way to keep the Ubuntu partition and boot it when required. Any chance of making that happen?
    TIA
    Matt

    Hit F12 to pull up the boot menu when you turn the machine on. Select the drive in the Ultrabay. Beware that the drive you boot off of will become the C: drive until you boot off the other drive again. One thing you should do if you haven't already done it is put the stock drive back in the main drive bay, boot into Windows, and burn a recovery disc set. You may need this in the future and it is a good thing to have should you decide to sell the system later since you sill be able to restore it to factory condidtion.
    If you just need to access the other partiton all you need to do is right click Computer in Windows Explorer, select Manage, click Disk Management, and assign the partition a drive letter. I would recommend just burning the recovery disc set and wiping out the stock drive so that you can use it for storage.

  • How to boot from external Hardisk where sap is installed

    Hi friends,
    I have an External Hardisk where SAP is installed in it i.e., Win 2003 on C drive & SAP on D drive.
    In my laptop Win XP is there, but I am trying to boot with External Hardisk where Win 2003 is installed.
    I am selecting to boot from External Hardisk where Win 2003 is installed but it shows the Win 2003 booting screen and the next moment screen becomes black.
    So can anyone help me How to boot from Hardisk.
    Thanks
    santhosh

    Hi,
      You can not boot OS from USB devices in Windows.
    Create the separate drive on your existing disc and install windows on that drive and use ur USB disc for installing SAP.
    Hope it'll help u....

  • Os9 upgrade failure, How to boot from cdrom

    hello world... following the instructions... almost...
    on the Ultra 5 running os8 I input-ed init 0 boot cdrom from the OK
    prompt for an os9 upgrade. 1/2 way done install quits. (new feature?)
    now system boots for about 20 seconds & then reboots cycling.
    I am not able to stop the process so that I can get an >OK prompt
    for another attempt.
    question.
    How to boot from the install CD and prevent system from
    'cycling' infinitely < arrgh!>

    press the stop key and the a key at the same time. the sun will stop at the ok prompt.

  • How to boot from DVD & how to force eject DVD

    Hi,
    Just installed a new HD on my MBP. I inserted the leopard DVD and it was spinning for about 2 minutes and then nothing happned. Just black screen. Now I tried starting holding the C key down. Nothing. I tried starting holding the eject button down, no eject of the DVD. I tried holding the button below the tracklpad down, no eject of the DVD.
    How to boot from a DVD?
    How to force eject DVD?
    What am I doing wrong?

    I hope you get an answer to this as I'm sturggling to
    A) start my computer as it just goes to a grey screen
    B) Force Eject a DVD
    Someone suggested the below on another thread, it didn't work for me but maybe it will work for you.
    http://discussions.apple.com/thread.jspa?messageID=5869652#5869652
    Re: Stuck on Grey Screen.. Won't Boot
    Posted: Nov 16, 2007 1:34 PM in response to: aliray10 Reply Email
    (I don't have my (no-longer booting) iBook in front of me to check this, but I think this is what I did last night....)
    Boot single user -- hold down "cmd-S" immediately after you turn the computer on.
    "diskutil list" will give you a list of your disks. My CD drive was disk1.
    "diskutil eject disk" should eject the target disk.

  • Hyper-V VM Generation 2 - How to boot from .ISO

    Hi guys, 
    Server OS: Windows Server 2012 R2
    I have a VM Gen2 with following settings: 
    I can boot fine from the same .iso from a Gen1 VM so the .iso is bootable. 
    I know that the Gen2 VM uses SCSI instead of IDE, but I have no clue regarding how to boot from the .iso..
    Any ideas?
    Thanks in advance!
    Best regards,
    Kenny

    Hi,
    Please confirm your image fixed the EFI boot comment. You may facing the following issue.
    Hyper-V VM Generation 2 - How to boot from .ISO
    http://social.technet.microsoft.com/Forums/en-US/29574a12-7528-4f49-ae12-6fe1d85b3732/hyperv-vm-generation-2-how-to-boot-from-iso?forum=winserverhyper
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to boot from SCSI in Virtual Machine

    hi 
    i have VM's in Hyper V windows server 2012 data center edition.
    i want to boot from SCSI drive for performance enhancement. 
    but when i select scsi then it doesnt boot and says boot failure no boot device found.
    also tried with bios settings of VM but there is no option to select boot from SCSI.
    so can anyone help me how to make it happen???
    how to boot from SCSI drive in VM???
    thnx 
    istiaq

    Generation 1 virtual machines cannot boot from the virtual SCSI chain and 2012 does not support Generation 2 VMs. There is no meaningful performance difference between the virtual IDE and SCSI controllers anyway.
    Eric Siron Altaro Hyper-V Blog
    I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
    "Every relationship you have is in worse shape than you think."

  • How to boot from cd for G5 system

    I am planning to install 10.7.2 on G5 System plz. help me how to boot from CD

    Mac OS X Lion (10.7) will NOT run on a PowerPC G5 system.  Leopard (10.5) was the last version of Mac OS X that supported the PowerPC CPU chip.
    You need an intel based Mac for Mac OS X Lion 10.7

  • How to boot from cloned external HD

    I have just cloned my HD using Carbon Copy Cloner.
    I can not figure out how to boot from this cloned drive.
    I am sure it must be something easy like holding a key down while restarting.
    Thanks,
    Brian

    you can also use the start up pane found within system preferences.

Maybe you are looking for