UCS Central Inventory Status is stuck at "in-progress"

One of the UCS Domains connected to UCS Central is not updating it's inventory in UCS Central. In UCS Central it shows the Inventory Status is "in-progress" and the last refresh was several days ago.
I've have restarted the UCS Central VM and attempted the "refresh-inventory" command in the CLI, but the "Inventory Status" remains as "in-progress."
Another UCS Domain connected to UCS Central is updating properly:
We have three blades that UCS Central is not detecting which is preventing a Service Profile from associating.

The FSM Status in UCSM says "Success." As I stated above it was registered fine and working fine for several weeks.
Now however the inventory in UCS Cental and in UCSM are out of sync. Since it isn't seeing some new blades that were installed we can't add them to a sever pool or associate Global Service Profiles.
UCS Central shows the Last Refresh as several days ago (the screen grab in the orginal post.) I believe it should be updating inventory every 10 minutes. I have tried to manually refresh the UCS domain in UCS Central CLI with the "refresh-inventory" command with no luck. I have also Suspended and Acknoledeged the UCS domain with no change.

Similar Messages

Register with UCS Central - Stuck on Repair Cert Verify Guid

I've got a new instance of UCS Central running v1.1.1a up. I'm trying to register my 3 UCS Manager domains. It seems to accept the hostname/shared secret and prompts me about accepting the certificate. But when I look at the FSM tab I see it's stuck on "Repair Cert Verify Guid".
Anyone else run into this?
Thanks,
Jonathan

Hi Padma,
Are you sure the shared-secret matches between Central and UCSM ? Yes. Just to make sure, I reset the shared secret and tried to Register with UCS Central again, but it made no difference.
Are you using self-signed certs or third party signed certs on UCSM ? I am using the self-signed cert that UCS Central issues.
Are those certs still valid ? I think the self-signed cert is okay, I can login to the UCS Central webpage.
Were these UCSM previously registered with different Central device ? No. However one of the domains was successfully registered with this UCS Central server and then unregistered. Then I made a number of changes to the UCSM including updating to Infra bundle 2.1.2a. I don’t think updating the UCSM infrastructure bundle would have this effect, but I wonder if I need to reset the UCS Central system somehow.
Thank you for your assistance.

Ordered recovery media days ago. Status is stuck at "ACCEPTED"

Given that I am paying $25 for a small, light-weight disk to be shipped, I assume the shipping would be fast. However since I ordered it on Wednesday the status has been stuck at "ACCEPTED: Your order was accepted by the order fulfillment system." I didn't think that it would take several days before shipping happened. When can I expect my disk? My recovery partition is gone, before anyone chimes in about it.
Thanks

The FSM Status in UCSM says "Success." As I stated above it was registered fine and working fine for several weeks.
Now however the inventory in UCS Cental and in UCSM are out of sync. Since it isn't seeing some new blades that were installed we can't add them to a sever pool or associate Global Service Profiles.
UCS Central shows the Last Refresh as several days ago (the screen grab in the orginal post.) I believe it should be updating inventory every 10 minutes. I have tried to manually refresh the UCS domain in UCS Central CLI with the "refresh-inventory" command with no luck. I have also Suspended and Acknoledeged the UCS domain with no change.

Inventory Status Report issue

Hello,
Upon running the Inventory Status report for item group item no. 'A' shows 5,000 Ordered. When I drilled down on the 5,000, SAP B1 only shows 4,500 on open POs. Please help
Using SAP B1 9.0 PL11
Thanks,
Jagriti

Hi,
Please refer SAP note:
991077 - How to check 'Committed' and 'Ordered' values
Thanks & Regards,
Nagarajan

Macbook pro 17" 3g battery status indicator stuck on 100%

Battery status indicator stuck on 100% Worked normaly until today
resetting smc does not help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          65262
Fully charged:          Yes
Charging:          No
Full charge capacity (mAh):          65262
Health Information:
Cycle count:          221
Condition:          Replace Now
Battery Installed:          Yes
Amperage (mA):          -1629
Voltage (mV):          8072

I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          9833
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          12217
Health Information:
Cycle count:          221
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1550
Voltage (mV):          7930

Need monthly "material-wise" report on inventory status.

Hi, gurus!Good Morning.
I am pankaj recently i joined in SAP-MM.I have 4 yr.of domain exp.in SCM.
Now,i allocate to one implementation project in Textile industory.Here there two plants,out of two GoLive of one plant has been done & in April-12 there is Golive of next plant.
Now, i am working on some standered reports.here client wants monthly material wise inventory status report & Daily material movement report materialwise.
i generate the report in" S_P00_07000139 "but it didn't show materialwise,it shows all material separate.
Request to help on the same.
Regards,
Pankaj.

HI,
No standard report will full fill your requirement
you have develop Z with help of ABAp consultant
for Material document table MKPF and MSEG
and check following link also it will helpful to you
[Opening Stock and Closing Stock fields and Calculation;
Regards
Kailas Ugale

SDK-DI - Inventory status via DI-API

It is possible to via the DI-API to add data to the Inventory Status (StockTaking) but it is not possible to execute the status.

This is indeed, a problem area, I too need reconciliation via the DI-API. The only solution (work-around) I have at the moment is to put the reconciliation entries on to a payment with an on account amount of £0.01 then write another journal for £-0.01,
This still leaves the two 0.01 transactions to be reconciled, but we are hoping that as these are the same value and can be created with the same references that automatic reconciliation can then be run against the BP and sort these out.
This is quite messy but the only solution I can think of.. Anyone else have any ideas???
Matthew Brown (B1 Systems)

Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?

I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.

Table for Inventory Status for Serialized materials

Hello,
Can anyone please provide the table name for finding out inventory status (i.e. unrestricted, Quality Inspection, Blocked) for serial numbers. I am trying to find out, in which inventory status does a particular serial# belonging to a particular material# is in?

Hello Azz:
Regarding the serial number status, you have to check the combination of three different tables:
EQUI - Equipment master data. In this table make note of the field 'Object number' (OBJNR), which is the primary key for:
JEST - Individual Object Status. This table contains the technical expression of the status in field 'Object status' (STAT), which is the primary key for:
TJ02 - System status. In this table you can find the texts for the system status in the fields TXT04 and TXT30.
Then, here you have some other tables which you might also need:
EQBS - Serial Number Stock Segment.
SER01 - Document Header for Serial Numbers for Delivery.
SER02 - Document Header for Serial Nos for Maint.Contract (SD Order).
SER03 - Document Header for Serial Numbers for Goods Movements.
SER04 - Document Header for Serial Numbers for Inspection Lot.
SER05 - Document Header for Serial Numbers for PP Order.
SER06 - Document Header for Serial Numbers for Handling Unit-Content.
SER07 - Document Header for Serial Numbers in Physical Inventory.
SER08 - Document Header for Purchase Order Item Serial Numbers.
I hope this helps!
Esther.

AR reserve invoice vs. inventory status

To Experts,
Can anyone tell me how to fix this inventory status?
AR reserve invoice was created and paid, however a delivery document was created separately which leaves the inventory shows committed 10, and available -10. At the moment the item physical item is "0" in the warehouse. what can i do to correct this and make the SAP show both committed and available "0"? Thank you very much.

You're supposed to link the AR Reserve Invoice to the AR Goods Receipt (via the 'Copy To' / 'Copy From' function).
As you've received the goods from a separate / unrelated AR Goods Receipt, you could maybe do a Goods Return to close the AR Goods Receipt, and then draw the AR Reserve Invoice into an AR Goods Receipt document again to 'fix' the inventory status.
Of course, you will need to pay attention to the costing (FIFO / Avg Cost) and the fact that the inventory items could have already been sold.
Review the scenario first before applying the above 'fix'.

Enhancement of report Inventory Status and Inventory in Warehouse Report

Hello,
it will be a great help if preferred vendor will be displayed in the stardardreports "Inventory Status" and "Inventory in Warehouse Report".
Kind Regards,
Sabine Lux

Hi Sabine,
Check here: /thread/2073266 [original link is broken]
Thanks,
Gordon

Authorization issue on Inventory Status Report!

Dear All,
One particular user is already authorized to access "inventory Status Report" .Moreover, Inventory Status Report's window is opened when he clicks but after pressing OK button the following messages comes [You are not permitted to perform this action [Message 200-30]].
Please advise me....

Hi,
As suggested above, re-post it as a question thread. You need to close your old open thread too.
Thanks,
Gordon

How to determine query used in Inventory Status (Available-to-Promise) List

Hi,
I'm trying to create a query that will give me commited qty per item per day. I tried checking table used in the Inventory Status(Available-to-Promise) by enabling systmen information under view buth the SAP is giving me "form=154 Item100000054 Pane3 ......... " Can somebody explain or guide me on how i can create the query.
Regards

Hi,
Welcome you post on the forum.
Do you need a query report or a formatted search query?
Thanks,
Gordon

Opatch error: Unable to lock Central Inventory

A) When applying Oracle one-off patches I get this error:
Unable to lock Central Inventory. Stop trying per user-request?
OPatchSession cannot load inventory for the given Oracle Home /oracle/VRQ/102_64. Possible causes are:
   No read or write permission to ORACLE_HOME/.patch_storage
   Central Inventory is locked by another OUI instance
   No read permission to Central Inventory
   The lock file exists in ORACLE_HOME/.patch_storage
   The Oracle Home does not exist in Central Inventory
B) Researching the error, I find thes solutions...
This error may occur because of any one or more of the following reasons:
1. The ORACLE_HOME/.patch_storage may not have read/write permissions. Ensure that you give read/write permissions to this folder and apply the patch again.
2. There may be another Oracle Universal Installer instance running. Stop it and try applying the patch again.
3. The Central Inventory may not have read permission. Ensure that you give read permission to the Central Inventory and apply the patch again.
4. The ORACLE_HOME/.patch_storage directory might be locked. If this directory is locked, you will find a file named patch_locked inside this directory. This may be due to a previously failed installation of a patch. To remove the lock, restore the Oracle home and remove the patch_locked file from the ORACLE_HOME/.patch_storage directory. For more information on restoring the Oracle home, refer to section "Restoring Oracle Homes".
5. The Oracle home may not be present in the Central Inventory. This may be due to a corrupted or lost inventory or the inventory may not be registered in the Central Inventory. For more information, refer to section "Diagnosing and Recovering from Central Inventory Corruption".
C) Everyhing looks okay. What am I missing?
Oracle - 10.2.0.4
OS - AIX 6.1
Multiple database on the server: IPQ and VRQ
Thanks in advance.

Hi,
did you setup a seperate oraInventory for each of both instances as recommended?
Check the contents of oraInst.loc
(On Solaris in /var/opt/oracle, not sure if the same on AIX)
It should point to the Inventory Location.
May be yours is pointing to the other ORACLE_HOME-Inventory.
I tend to use the Inventory location
/oracle/SID/oraInventory, so each ORACLE_HOME has its
own non-mixed inventory.
But you have to keep in mind that oraInst.loc needs to be adjusted,
when you use runInstaller or OPatch !
Or is one ORACLE_HOME a binary copy of another?
A bianary copied ORACLE_HOME is non patchable at all, as far as I know.
In this case (beside this is not a supported SAP configuration), you need to
apply the patches to your copy-Source and do a re-copy.
There is a meatlink note describing how to use a cloned ORACLE_HOME,
but again: This is not supported within SAP!
Hope this helps
Volker

IMessages status is stuck in offline

My iMessages status is stuck in offline. When I try to click "available" it doesn't change.

Hi,
The Messages app may well be set to Off line if the Bonjour account is Not active and you only have the iMessages account and Bonjour.
The Status setting only refers to Buddy Lists (As in iChat).
The iMessages is either Enabled (and therefore Logged in and Active) or not.
Other than error messages telling you a iMessage cannot be sent there is no way of knowing (well you do see "Delivered" and "Read" under sent messages).
8:54 PM Friday; November 21, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

UCS Central Inventory Status is stuck at "in-progress"

Similar Messages

Maybe you are looking for