UCS,CUCM and MS Exchange

Hi,
Apologies for noob question but is it possible to run CUCM & MS Exchange on the same UCS C server? Is there a sizing tool that will help me spec this?
Rich

If you want/expect a link that covers whether a particular app is supported on UCS, there isn't one. You won't find a doc explaining on which scenarios Exchange will work and how to size, etc.
We provide guidelines for ALL the 3rd party apps, only special case which has particular considerations is the 6K as which set of applications can be deployed is limited.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Mixing BE6000 UCS Server and "normal" UCS server in the same deployment

Hello,
I have been handed a project which has one high density BE6000 UCS server and a separate UCS C220 M3 server. The latter server was included to host a MediaSense call recording system but this will only use 2 of the available 8 vCPUs on the UCS C220 M3 server.
The total number of users is 200.
I want to implement a resilient system and so would like deploy two servers in a cluster for each of the following applications:
CUCM 10.5
Unity Connection 10.5
IM & Presence 10.5
As well as these applications there will be UCCX 10.6 and Cisco Unified Attendant Console Advanced (10.5) but these will be deployed as single servers.
Looking at the UCS servers they have capacity for me to split the CUCM/CUC/IMP clusters between them.
I cannot see any technical reason why this will not work but do not want to be caught by any Cisco support policies.
If I were to implement the system in this way would there be any issues with the deployment or getting support from TAC.
The separate UCS C220 M3 server has 8 x 8GB RAM (64 total) and 8 x 300GB HDD plus a quad Ethernet card.

James first of all I am not sure I understand your query in detail. Do you mean you have two UCS220 M3 servers? and one of them is currently running BE6000?
Having said that, the key here is to carefully plan your deployment against the capacity of the servers you have,.
Eg..Deploying 200 Users, using the ff OVA
UCS 220 M3 server 1: (using default TRC ie 8vCPU with 8GB per vCPU)
Publisher (2500 cucm OVA): 1vCPU (6GB RAM), 80GB HD
IMP-Publisher (1,000 OVA) :1vCPU(2GB RAM), 80GB HD
CUC-publisher (1,000 users OVA) :2vCPU(6GB)--NB 1vCPU is reserved for ESXI, 160GB HD
UCCX-Master: (300 agent OVA): 2 vCPU (8GB) and 292GB HDD
With this placement you have a total of 22GB RAM and 612HDD used up
A break down is shown below..
Server
Server Name
C220 M3S TRC#1 (Medium)
C220 M3S TRC#1 (Medium)
Application Short Name
Application Long Name
Release
VM Name
vCPU
vRAM
vDisk
CUCM
Unified Communications Manager Release
10.x
CallCtrl: 2,500 users
1
4
80
IM&P
IM & Presence Release
10.x
1,000 users
1
2
80
CUC
Unity Connection Release
10.0
1,000 users
1
4
160
ESXi
Unity Connection
ESXi
1*
CUCCX
Cisco Unified Contact Center Express / Unified IP IVR Release
10.x
Main: 300 agents
2
8
292
ESXi
VMware vSphere ESXi
5.5
4**
* Note: This is a 1 physical CPU core per host regardless of the number of Cisco Unity Connection (CUC) VMs.
** Note: This is 4GB physical RAM per host.

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.

I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

Configure Jabber for Mac with local CUCM and WebEx Connect

Hi, I was wondering if anyone has been able to configure the Jabber for Mac 8.6.2 client to use the WebEx Connect presence server with a local CUCM and Unity Connection servers. The preferences accounts tab does not show or allow the addition of the voice services. I have added from a working local CUCM preferences plist file what I believe are the correct entries however I still cannot see the accounts on the preferences tab. We currently do not have a local cisco presence server hence the requirement to trial the WebEx Connect server as I can't get past the first configuration step without it.
regards
paul

Hi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

Ok,
My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Suggestion for Pricing Type and Pricing Exchange Rate Type

Dear All,
Good Day,
what would be your recommendation to maintain Pricing type and Pricing exchange rate type for below process.
1. Invocie.
2. Cancellation of Invoice.
3. Return Invoice.
4. Credit Note.
5. litigious Invoice.
Best Regards,
KSK

Thanks sam,
I have configured the same but now problem is Billing Header Exchange rate is not changing. Because of that Accounting document also doesn't have new exchange rate,.
1. Is there any another config needs to be maintain.
Example:
Sale order Exchange rate              10.45           Order date : 01.11.2008
Billing Header Exchange Rate         10.45           Billing date : 05.11.2008
Billing Line item Exchange Rate      11.00           Billing date : 05.11.2008 base on VTFL Config
Account Document Exchange Rate 10.45          Posting date : 05.11.2008 because of Billing Header exchange Rate
I need Accounting document also to carry New exchange rate 11.00 . suggest me.
Best Regards,
KSK

CUCM and TMS/VCS

Hi All,
Looking for some best practice/offical advise for the follwing solution.
We are looking to deploy TX 9000 endpoints on CUCM 10.x.
However the majority of the current enviroment is still in a 'Tandberg' style deployment relying on TMS, VCS, etc. We have a range of endpoints across a number of different business groups (C, SX, MX, EX). We are looking to migrate a number of these endpoints along with the TX systems onto the CUCM.
My Question is, what is the best practice for sharing address books across these two enviroments. I have looked through all the Cisco documentation I can find, and have read on the forums the extensive discussions, about TMS shared address books with CUCM and provisiong address book issues with older systems. So was looking for any advice or pointers to where I can find what solution for this I should deploy.
Thanks in advance for any suggestions.
Ian

kick off with:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10.pdf
chapter 28

How can i split Client Network traffic and My exchange traffic with two differnet ip address?

Hello Everyone
sorry for my bad English and also my bad explaine
here is my network looks like
all the client on one subnet and network is 192.168.0.0
i have Dsl router that connect to Tmg server
i have Tmg with two NIC
1-192.168.0.4
2- 2 Public Ip address
i want to do this
i want to split user's traffic and my exchange traffic
i mean i want to route user's traffic with one public ip addresss
and my exchange server's traffic with another public address
but when i add additional ip address at Tmg or create new NIC card
all of my traffic route with one public ip Address what should i do?

Hi Uhan,
You need to use ENAT fuction on TMG to achive this
On the External NIC assing the Second IP as Additionl IP address (VIP)
Create a network Rule to NAT traffice From Exchange server IP address to the required Public IP which you need the E NAT.
Ensure you are creating rule only from Exchange server IP and not all INternal.
Look at the below Doc you step by step config
http://www.isaserver.org/articles-tutorials/configuration-general/Configuring-One-to-One-NAT-TMG-2010.html

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?

Hello,
Can you tell us what versions of CUCM and CUxAC you are using? Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application. You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
Thanks,
Tony

Difference between EAS(Exchange activesync) and EWS(Exchange web service)

What are the main differrences between EAS(Exchange activesync) and EWS(Exchange web service)...
I know the basic difference
that is EAS(Exchange activesync) is a set of protocol
and EWS(Exchange web service) is a web service....
Please explain me the difference

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

Migration of CUCM and CUCX

I plan to execute an upgrade of CUCM and CUCX from version 7.1.3.30000-1 to a version 9.1.1.20000-5 (CUCM) as well CUCX 7.0(1)SR05_Build504 to 9.0.2.10000-71(CUCX) respectively on a VMware ESXI 5.0 . I will be grateful if someone finds a little time to help me to make the upgrade plan
Cisco unified contact center express
Current version :Cisco application administration-7.0(1)SR05_Build504
                  pakage cisco unified ccx premium
                  cluster default
New version: Cisco Unified CCX Administration
             System version : 9.0.2.10000-71
Cisco Unified Call Manager
Current version :sysystem version 7.1.3.30000-1
New version:system version 9.1.1.20000-5
Please check the snapshot of the current versions
Regards
Akhilesh Nambiyath

Since you're a partner you should be able to go here, then it's time to do some reading
https://communities.cisco.com/community/partner/collaboration/migration?view=overview
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Create port channel between UCS-FI and MDS 9124 (F Mode)

Dear Team,
We were trying to create port channel between UCS FI and MDS 9124
But the port channel not getting active in F mode on MDS 9124
FI is in FC End Host Mode
We have enabled FC uplink trunking on FI
We have enabled NPIV on MDS
We have enabled trunk on MDS
FI and MDS in default VSAN
To check we changed the FI mode to FC Switching mode and port channels became active but in E mode
when we enabled FC uplink trunking on FI and FC Switching mode port channels became active in TE mode
but in both the above cases showflogi database shows WWPN of SAN alone not showing any from FI.
How to achive this?
Have read that no need to change the swicthing mode to FC Switching mode and keep as FC Endhost mode
SO how to achieve Port channel with F mode in MDS and FI ( Mode showing as NProxy)
Does it has to do anything with MDS NX-OS version? (https://supportforums.cisco.com/thread/2179129)
If yes how to upgrade as license for ports came along with Device and we do not have any PAC/PAK or license file as it came
with license
Also we have seen 2 files availabe for download (m9100-s2ek9-kickstart-mz.5.2.8b.bin and m9100-s2ek9-mz.5.2.8b.bin) which to use
Thanks and Regards
Jose

Hi Jo Bo,
what version of software if your MDS running?
On your UCS do connect nxos and show inteface brieft and look at the mac address.
it is possible that you might be hitting the bug below. if this is the case you might need to upgrade the firmware on your MDS.
Add MAC OUI "002a6a", "8c604f", "00defb" for 5k/UCS-FI
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCty04686
Symptom:
Nexus switch unable to connect any other Nexus or other Cisco Switch in NPV mode with a F port-channel. Issue might be seen in earlier 5.1 releases like
5.1.3.N1.1a
but not the latest
5.1.3.N2.1c
release. Issue is also seen in
5.2(1)N1(1)
and
6.0(2)N1(1)
and later releases.
Conditions:
Nexus configured for SAN PortChannels or NPIV trunking mode Nexus connected to UCS via regular F port channel where UCS in NPV mode NPV edge switch: Port WWN OUI from UCS FI or other Cisco manufactured switch: xx:xx:00:2a:6a:xx:xx:xx OR xx:xx:8c:60:4f:xx:xx:xx
Workaround:
Turn-off trunking mode on Nexus 5k TF-port Issue does not happen with standard F-PORT Remove SAN Portchannel config
Further Problem Description:
To verify the issue please collect show flogi internal event-history errors Each time the port is attempted OLS, NOS, LRR counters will increment. This can be determined via the following output, show port internal info all show port internal event-history errors

How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj Kumar

Hi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

I have an all contacts list and an exchange contact list how do i sync them into 1 list(my exchange list)

I have an all contacts list and an exchange contact list how do i sync them into 1 list(my exchange list. I want to only use my exchange list but i don't know how to put the other contacts from all contacts or contacts into my exchange list??

Can any user with similar problem or IPhone developers give a remedial suggestion please?

UCS,CUCM and MS Exchange

Similar Messages

Maybe you are looking for