UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?

Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

Similar Messages

Cisco UCS Management Pack for System Center Operations Manager 2007 R2 Login Error

I have Cisco UCS 1.4 (3q) and just installed the MP v2.1 for Cisco UCS, however when I click on the "Management Pack Events" alert view in the SCOM console, there are error for event number 19900. The description of the error is as follows:
Description:
CISCO UCS R2 MP (https://10.x.x.x/nuova) [CISCO.UCS.R2.Proxy.LoadCache.ProbeAction.vbs] : CISCO UCS Login Error: Authentication failed (Code: 551)
I noticed that it's looking for the /nuova directory, but in order to login to our UCS environment, we usually just go to the IP address - so I'm wondering if that has something to do with it? I've verified that when going directly to the IP from Internet Explorer I can login using the opsmgr credentials we specifically created for this account. I've also gone through the process of creating a run-as account on the SCOM side and associated it with the correct profiles.
Any help is greatly appreciated.

Troubleshooting has found out its user error, wrong password configured.

Active Directory Domain Services(2012 R2) Management Pack for System Center 2012

Hi
I went to the Microsoft site and not able to find the ADDS 2012 R2 mp for SCOM 2012 R2. It looked strange to me
I went to the http://www.microsoft.com/en-us/download/details.aspx?id=21357 site and extracted the file and file contains the mp file for 2003 and 2008.Is something i am missing or someone can share the download link for ADDS 2012 R2 mp?
Donald D'souza (http://donald-scom.blogspot.com/)

This is the one for AD 2012.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

UCS management pack for SCOM

I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?

The Problem is that you use an “&” string in a name of one of the protection Groups.
Change the name of the protection Group where you have used an “&” symbol
. Restart the “System Center Management” and you should see that the discovery success.
If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR

Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:48
Event ID:      33503
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Data Warehouse" />
    <EventID Qualifiers="32768">33503</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
    <EventRecordID>13089</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>DW2012.contoso.loc</Computer>
    <Security />
</System>
<EventData>
    <Data>Transform</Data>
    <Data>22989</Data>
    <Data>TransformEntityRelatesToEntityFact</Data>
    <Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
    <Data>   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Update Rollup 8 for System Center 2012 SPM - DPM Error

Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon

Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon
Facing Exact same issue. Below is log:
MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
=== Logging stopped: 3/9/2015 0:37:39 ===
MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.

Please clarify license about server managed and configuration manager client ML system center 2012

Could clarify why managed servers License required ,already we bought the configuration manager client ML License ? We are planing to buy system center operation manager 2012

Hello,
if you wants planing to Monitoring your AD with Exchange Server and you have only one physical Server with for example 2 CPUs and 2 VMs, you need to purchase the System Center Standard 2012 R2 SML for Monitoring your Server environement. However, if
your AD is a datacenter or for example 4 x Windows Server Standard with 8 VMs than, you need to purchase the System Center datacenter SML.
the System Center SML is licensed per physical Server: one license up to two physical CPUs. if you have for 2 physical Hosts with 2 CPUs each, you need to purchase two System Center licenses.
the only difference between Standard and datacenter is only about virtualization rights
for System Center Operation Manager for your Clients Desktop, you need to purchase the System Center Client Management Suite includes: Operation Manager; Services Manager; Data Protection Manager and Orchestrator.
thanks
diramoh

What is the alternative to TMG/ISA For SSL-Bridging-Capable Reverse Proxy For System Center 2012 R2 IBCM?

When I look up alternatives to TMG many other answers say something like "Don't worry about it. TMG 2010 is under support until 2020."
Well, we don't have TMG and can't buy it since it is off the market. Can it still be legitimately purchased through any resellers?
We need a reverse proxy that specifically supports SSL-Bridging so that device certificate authentication is not broken when the connection passes through the proxy.
Which reverse proxies that are currently on the market are known to work successfully with System Center Config Manager Internet-Based Client Management and also with other Microsoft products such as Lync 2010 and RD Gateway 2012 R2?
Do any Cisco ASA or ACE models support the required functionality for machine certificate authentication?
We have ISA 2006 licenses available, but I would hate to roll that out and then have to replace it in only 2 years rather than using something that can stay in place long term. Maybe we could use ISA 2006 temporarily as a stopgap if the next version
released of Windows Server Web Application Proxy would meet the requirements and can be deployed in production before ISA 2006 is completely EOL.
I hate that Microsoft keeps discontinuing all the related products to this before they have their replacements ready.

Hi,
You are correct, all TMG product sales officially ended in December 2012.
In addition, an ISA Server and a TS Gateway server can be used together to enhance security for remote connections to internal network resources. However, it
seems that ISA 2006 cannot support that on Windows Server 2012 R2. For more detailed information:
Configuring the TS Gateway ISA Server Scenario
Personally, Web application proxy would be an alternate. In addition, for the question related to Cisco product, you can contact Cisco for assistance.
Best regards,
Susie

Update Rollup 5 for System Center 2012 R2 Data Protection Manager

Hi.
I am currently on update UR1. Is it possibel / recommended to upgrade to UR5 directly from UR1?
Regards
RoarH

Hi Roar,
Yes its possible to update from RU1 to RU5 but be aware there are some known issues with UR5 which require Hotfixes.
https://www.microsoft.com/en-us/download/details.aspx?id=45914
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Management Pack for Server 2008 OS Monitoring version 6.0.7296 cannot be installed or downloaded from the catalog

In our newly installed Operations Manager I'm trying to install the MP's for monitoring Windows Server 2008 OS through the catalog option. Every attempt (including downloading it through the OpsMgr console) fails with the following error:
Windows Server 2008 Operating System (Monitoring) did not pass the security verification.
The management pack cannot be downloaded and the temporary file has been deleted.
Could not load management pack [ID=Microsoft.Windows.Server.2008.Monitoring, Keytoken=31bf3856ad364e35, Version=6.0.7296].
This includes the required packs: "Windows Server Operating System Library v6.0.7296" and "Windows Server 2008 Operating System (Discovery) v6.0.7296".
The only option I found was downloading it directly from the website http://www.microsoft.com/en-us/download/details.aspx?id=9296 but I'm a bit anxious if it can't be downloaded from the catalog. Is this pack revoked? Or could there be something wrong
in our environment that prevents us from downloading it from the catalog?

I have the exact same issue - and when I select to download from the catalog, I get an error that the security certificate cannot be verified. I checked it, and it is valid till 2016, so I selected continue and then it works normally. however I do get the
same list of errors.
The normal "manual" download is available, and if it was pulled by MS, they would block the download button there too ?
I downloaded the MP manually and installed it without any issues. same for the sharepoint 2010 MP 14.0.7135.5000 mp. installing via the catalog failed while the manual download was available and works OK.
(and the weird thing is - I downloaded / installed a few other updates via the catalog fine....)
System Center Management Pack for Windows Server Operating System (mp download)
Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007 (mp download)

Latest 2003 DHCP management pack for SCOM 2007 R2 ?

According to the links below the download of the Windows Server DHCP Management Pack includes monitoring of 2003 and 2008 DHCP but when running the .msi I only see references to a 2008 R2 MP.
http://pinpoint.microsoft.com/en-us/applications/windows-server-dhcp-management-pack-for-system-center-operations-12884902059
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24&displaylang=en
I'm looking for latest 2003 DHCP MP.
thanks

I think the version 6.0.6709.0 which can be get in Microsoft Download Center should be the latest version and it supports Windows Server 2003. You can
see the Release History “11/7/2008 - Updated release, version 6.0.6452.0, for DHCP 2000/2003/2008”, “6/28/2010 - Updated release, version 6.0.6709.0", with added support for DHCP 2008 R2”:
Windows Server DHCP Management Pack for System Center Operations Manager 2007
http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24
Thanks.
Nicholas Li - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

Similar Messages

Maybe you are looking for