UCSM to C240 - can use old 2248 way or have to use the new 2232 way?

Referring the the fairly well known, but somewhat dated C200 document:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/ucsm-integration.html
If my customer is ordering brand new C240's and 6296's, and we want to have the 10G ports on the C240 CNA's go directly to the 6296 so they are not oversubscribing like they would if going through a 2232... and use a 2248 for the uplinking of the LOM connections... But it is not clear at all if that method is supported with newer server firmware and UCSM versions.
-mike

I understand new vs. old, and that the 2248 was 1G... Does someone have a statement by Cisco saying this is not supported ???
If the customer has a hard requirement to not oversubscribe, and go wire rate, we are limited to 8 servers per 2232, which amounts to them paying $1250 for each of 8 servers up to $10000 for a single server for what is really just a dongle.
even the new adapters still will have to go to the 2232 from what I hear, whereas if they could hook up straight to the FI if they only had a couple of C-Series in their Blade environment... does not seem like rocket science to do a bit of packet manipulation on the CNA or in the FI
Does not seem to follow the mantra of less cabling, complexity, and components of unified....

Similar Messages

I am using a Mac Leopard and want to know if I upgrade to Snow Leopard (so I can use the new Lightroom 4) will any of my programs be affected. I will not be able to restore some software and want to know if I'll lose those programs with the upgrade?

I am using a Mac Leopard and want to know if I upgrade to Snow Leopard (so I can use the new Lightroom 4) will any of my programs be affected. I will not be able to restore some software and want to know if I'll lose those programs with the upgrade?

Hello,
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
And it's been reported that if you have a MobileMe account Apple will send one free.
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

How i can use the new Trailers (iPhone, iPad) on my mac?

Hello, sorry for my bad english.
With the new version on the app Imovie on Iphone and Ipad with 5.1 sync there are a few of new trailers. but on Imovie (Mac) tere are the old traditionel trailers.
How i can use this new trailers on my mac?

Does iTunes see the iPod?
Is the computer authorized for the account that purchased the items?
iTunes Store: Authorize or deauthorize your Mac or PC

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

My old Apple ID won't allow me to use the old password to log out of the cloud. I can't use the new one, either. The new Apple ID is in the iTunes and App store. But I can't change it on the cloud without logging out. Which I can't do.

I can't use the old Apple id and Apple password on my new Iphone 6 - I can use the new ones. But I can't access the cloud in the meantime. The iTunes and App Stire has the new Apple ID, but I can't get into the settings to change it on the iCloud. It asks for the Old Apple ID and password, which doesn't work. Does anyone know how to change the old Apple ID on the iPhone in the settings for the iCloud?

First, try the new password. If you didn't sign out of iCloud prior to changing the primary email address of your Apple ID, this is what can cause this problem.
Also, read this: If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

I want to transfer my data to new computer and use the new computer for iPhone 5. Have anyone can recommend the best way for me?

I have some problem to transfer my data via home sharing. (Maybe my internet connection is poor)
I tried to transfer all the apps and music via home sharing. When it's done, it showed the internet connection is time-out. (So sad )
So I want some people to help me about the methods to transfer datas from old computer to the new one.
Then I can use the new one with new iphone 5.
PS. I use iPhone 3gs with iOS 4.3.5.
Old computer uses Microsoft WIndows XP.
New one uses Microsoft Windows 7.
Thank you

you can't recover iOS crypted backup password, for security purposes. your backup is useless. sorry.
if you still have your old iPhone, make a new back-up

Our CMS does not support new version of Firefox. Can I have the "downgraded" version of Firefox AND the upgraded Firefox both on my Mac, so I can use the older Firefox to manage my CMS?

Essentially, the CMS we use to manage our website (mainstreetartsfest.org) is Sitefinity, and apparently it doesn't support the newest version of Firefox. And, from what I understand, this version of Sitefinity is not being upgraded at the support level - we are now being asked to spend $$ on moving to a new CMS to support the browsers. Chrome, Safari also a problem. Only IE works, and we all have Macs. I want to know if we can have the older Firefox AND the upgraded Firefox both on our computers so we can use the new Firefox for general browsing, and resort to the older, 3.2 version for managing the CMS. I know I can download a previous version - but I would rather not replace our new version of Firefox in the process.

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I have downloaded the latest version of Lightroom but I so not see the option Photo Photo Merge in order to use the new HDR

Cannot figure out what is wrong. It says my lightroom is up to date but not showing the option photo>photo merge so I can use the new HDR function in Lightroom. Is anyone else having this problem?

Contact Adobe. That is what I finally had to do. the number is 1-800-833-6687. There was a problem with a file. They took over my computer and got everything working for me.
Shane

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

You can use the same email address that you used to set up the old Sync? , before bookmarks can return, if I registered success?

for my old email address account( @qq.com)
july 2014 I install new windows xp, but I can't log in before account 44*******@qq.com, its always give me enjoyful when I was easy open bookmark url from different computer.
but there is no any notice or email to me firefox will have new sync system, if there, I could backup before bookmarks from 28 vision ( or some june's vision), but this big browser group is quiet, now, I can't log in again old account,
achieve process:
1st, normal account and right password, its show me unknown account.
2nd, Password Reset, " An email has been sent to the requested account with further information. If you do not receive an email then please confirm you have entered the same email address used during account registration.", I couldn't receive any mail(or in spam) :(
3rd, How to update to the new Firefox Sync ...
"You can use the same email address that you used to set up the old Sync." , before bookmarks can return, if I registered success?
I really feel disappointment with firefox( although used for many years), much text, but couldn't resolve clear simple path. answers more hidden link to read, I just use it explore internet, I am not technology engineer, don't care what so much b***t.
thanks, back me old bookmarks only, thanks.

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac

The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
LN

I've been using older printers (including an imagesetter) connected to10.5.8 With a new 10.6 machine I'm looking to still use the printers. I can use the olderG5 as a sever if need be. What would be the best way to do this? ine

I've replaced my 10.5.8 with another machine 10.6.8 which as we know doesn't support Apple Talk which has been used to print to 2 bulletproof older printers and an imagesetter. I wan't to keep using the printers and can use the 10.5.8 as a server. What is the best way to do this?

Hi
You could do this a number of ways. Using the LPD Daemon might work best for your location?
First: assign the machine you're going to use as the 10.5.8 'server' a fixed IP address.
Second: add desired printers to that machine using the usual methods.
Once added share them using the Print Sharing option in the Sharing Preferences Pane. On the 10.6.8 machine add the printer using the IP address of the 10.5.8 'server'.
System Preferences > Print & Fax and click the '+' icon. Click on the IP Icon and key in the IP address you previously assigned. Leave the Queue field alone and select the relevant PPD from the Print Using field (see below). You'll have to search for these yourself.
You don't have to 'install' the PPDs on the 10.6.8 machine as such. Simply copying them over from their location on the 10.5.8 machine (use a memory stick to do the transfer) to the same location on the 10.6.8 machine will be enough.
There should be no need to restart.
HTH?
Tony

I bought a iTunes card and when I scratched it for the code I scratched of the numbers is there any way I can use the card ?

I bought a iTunes card and when I scratched it for the code I scratched of the numbers is there any way I can use the card ?

iTunes Store: Invalid, inactive, or illegible codes - Support - Apple

I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

UCSM to C240 - can use old 2248 way or have to use the new 2232 way?

Similar Messages

Maybe you are looking for