UD Connect: UDCADAPTERROR::RSSDK|100| error
Hi All,
My RFC connection with J2ee is perfect.
While creating DataSource and while selecting Source Object getting following error.
UD Connect: UDCADAPTERROR::RSSDK|100|Cannot open the connection
Using BI 7.0 SP9.
Thanks,
Nagesh
1. Make sure you have appropriate driver which can connect to target database under visual admin --> server ->services ->jdbc connector .. ( for example name is ORA_DRIVER)
2. Then create or clone from SDK_JDBC under connector 1.0 ( under va -> server --> services --> connector --> connector 1.0 --> sap.com/com.sap.ip.bi.sdk.dac.connector.jdbc ) example SDK_JDBC_XX1
A.... maintain "managed connection factory" properties which connect to your target database system
B... for SDK_JDBC_XX1 --> Resource Adapter under "loader references" "Add" database driver which is decided in point 1 - as library:ORA_DRIVER
Now you maintain your JCO RFC to backend BW system , create UDC connection and you will be able to see SDK_JDBC_XX1 in "name of connector" and while defining extractor you should be able to see table name of target database.
Gautam.
Similar Messages
-
Source Obj UD Connect - UDCADAPTERROR::RSSDK|100|Cannot open the connectio
I have problem with UD Connect, it appears a message
UDCADAPTERROR::RSSDK|100|Cannot open the connectio
when I try to open the list of Source Obj UD Connect in the Data Source
Does anyone knows about this issue?
Thansk!hi All,
anyone has a solution for this problem i am also facing the same issue.
please post the resolution asap.
shiva +91-9731057681 -
C4580 Wireless Fail (VSA 100 error)
I'm on the second C4580 now, the first was just replaced under warranty due to paper feed issues, but I've had the same networking problem with both units. The first unit was installed 7 months ago, and immediatly connected to the wireless router and worked fine. The printer was unplugged and moved one day, and I never got it to work correctly again. I uninstalled the software and attempted reinstall but got the VSA 100 error. The printer's network test said that I may have MAC address filtering on, which I do not, nor any other filtering or protection beyond the WPA key. Then the paper feed broke.
So the second unit came earlier this week and much like the first unit it installed very quick and the computer could recognize the printer and I could access the printer's IP address to get to its home page. Oddly, when I opened the HP solution center it said I wasn't connected to the printer until I went to the settings tab and accessed the printer's hompage through that, then it said it was connected. Then the solution center started having a sort of fit where if flashed every few seconds that the printer was connected then wasn't. Then the printer went to sleep (screen went dark) and I could no longer send test page requests. I thought this might be the firmware issue that was addressed with updates last Spring (unresponsiveness), so I downloaded those files, but when I ran them they couldn't find the printer. I then downloaded the HP network diagnostic, but it did not see the printer in either list (even after cycling the router and printer power). I then uninstalled the driver software and attempted to reinstall when I got, wait for it, the VSA 100 error. The printer does seem to work fine on a USB connection, but that isn't a permanent solution for me. I've gone through my router settings to see if any other possible filtering could be going on, but can't find anything. I even disabled the WPA password, setting my network wide open, and cycled the printer's power, with no luck, it didn't show up on the router as a device.
The printer's network test report says the following:
Wireless on- pass
Wireless networking- pass
Network name (ssid) found- pass
Security- pass
Printer settings consistent with wireless router settings- pass
No filtering- FAIL
Connected- not run
Signal Strength- Very Low (of note: the printer was sitting next to wireless router)
Other networks detected matching your network name (ssid)- no
Wireless Networks Dectected- 4
Downlink Count- 5
Channel- not run
Network Name (ssid)- LookMaNoWires (of note: this is the correct network name)
Hardware Address (MAC)- 00:1f:29:f6:e7:d8
IP Address- Not Applicable
Configuration Source- Not Applicable
Communication Mode- Infrastructure
Authentication Type- WPA-PSK
Encryption- Automatic (AES or TKIP)
The computer is running Vista 64 w/Norton Internet Security 2009
The router is a Netgear WNR834B
I have no clue where else to look for this issue. Any thoughts/ ideas would be appreciated.Have you disabled Norton firewall?
This tool may also be helpful.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
"Connection to server failed" error with Gmail exchange server
Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again. -
i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks
sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices. -
Itunes cannot connect to iTunes store error 306
Hi, I think I originally posted this on the wrong forum. So I will repost and hope for the best.
Up until recently I used to connect to the internet via airport and everything worked fine. I could connect to iTunes store no problem.
The connection was all set up by the local phone company and somehow they connected the iMac to airport via a modem.
I know that this appears to defeat the point of airport but it worked fine.
I had connection problems with the modem (it was old and needed replaced) that was attached to the airport and iMac. I arranged for the telephone company to come and replace the modem. However, although they replaced the modem and the internet connection is fine.
What they did not do was to reconnect the Airport device and now I cannot connect with iTunes store. Now instead of connecting to the internet via the Airport connection I now connect via Ethernet
The error message I get is
"iTunes could not connect to the iTunes store. An unknown error occured (306).
Make sure your network connection is active and try again."
I think that if someone could advise how I stop trying to connect to the iTunes store via Airport but via an Ethernet connection
iMac intel Mac OS X (10.6.6)iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US -
SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.
Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect -
Is there anyone out there who have come across a 100 error code by trying to log into their e-mail through their internet provider? The error code means that you are trying to log in from another country. Is there something wrong with the settings???Please let me know if there is an answer out there. thank you
MicheleAs you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions? -
We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it. -
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
Cannot connect Ipod to Itunes, error messages
I just unpacked my brand new Ipod Touch 16 Gb, in version 1.1.2.
I have the most serious problems to get a reliable connection to ITunes. In 1 case out of 20 it works, but usually I get a couple of error messages:
a) itunes could not connect to Iphone because error while reading from device
b) Itunes could not connect to Iphone because unknown error 0xE8000001.
after 2 hours I managed to upgrade to version 1.1.3., managed to sync a few songs, but now connections are impossible, with above error messages.
Please help.
Patrickhave you tried unplugging all usb devices, including any usb hubs? Plug ipod directly into usb 2 port and try again.
-
Hello,
I'm getting WebUtil WUT-100 error, thus:
Loading http://2ua300tw.epcor.ca:8890/forms90/webutil/webutil.jar from JAR cache
Loading http://2ua300tw.epcor.ca:8890/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://2ua300tw.epcor.ca:8890/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
2004-Aug-03 11:47:02.826 ERROR>WUT-100 [FileTransfer.defineFile()] Bad file information string: |0|S|Y|File Upload|Loading . Please wait...
I've checked the discussion forum, but I couldn't find any discussion relating to this error. Does anyone know how to resolve this problem?
Thanks,
gkHarm,
I get the same error here, but my file is not being uploaded.
You need to provide a string to the progressSubtitle parameter of the client_to_as_with_progress function, not only ''.
This works for me.
HTH
Gerald
Maybe you are looking for
-
How can I convert my web page from a fixed width layout to a fluid grid layout?
I'm taking a web design class (I'm using Dreamweaver CS6, btw) wherein the professor started us out building our websites in a fixed width layout but now I want to change my site into a fluid grid layout. My "site" so far is just one long page, and
-
Problem with copying files between OS 9 to OS 10.4.9
We have updated 2 computers to 10.4.9 after som minor problems its working fine the only problem we still have is that we cannot copy files from our older Mac running OS 9.2.2 to the macs running 10.4.9 if we copy 1 file its working when we want to c
-
I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ? I don't want to crea
-
S_ALR_87013603 Library 5A1 does not exist
Have run report S_ALR_87013603 2 days ago and this report worked, however when I execute today I get the error message "Library 5A1 does not exist" I have checked in GRR3 and library 5A1 no longer exists, how do I get the library back? thanks Ifty
-
XMLSocket on Windows Mobile - no data send and onConnect not entered
Hi, I'm developing a FlashLite 2.1 application and try to communicat with the host device (WiMo) through a XMLSocket to write some data to the disk. I have the following code in the FL-App: xmlSocket = new XMLSocket(); xmlSocket.onConnect = function(