UD Insp. Lot stock tab is not showing

Dear Friends,
At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
can anyone explain how to add this tab.
Reg: T.code - QA11

hi sandip
UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is not stock relevant
regards
thyagarajan

Similar Messages

Inspection lot stock tab is missing

Hi,
In inspection lot generated for 01 insp type purchase order, the inspection lot stock tab is missing.
Is there any control ?

No.
The inspection lot stock tab is not cotrolled by user in standard, but fields possible by configuration.
If there is no inspection lot stock tab, it means the inspection lot has no stock even if insp. type '01'.
As YOGINI mentioned already, it must be source inspection or GR with other account assignment (not stock).
Regards
Luke

SAP QM - Inspection Lot Stock tab missing in QA11

Hi,
My scenario is raw material inspection and I executed the scenario as follows
Step 1 : Assigned 01 inspect type to the material in QM view .
Step 2 : Created three MIC's
Step 3 : Created Sampling procedure
Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
Step 5 : Goods receipt of 100 Qty for the material through purchase order.
Step 6 : Created Inspection lot for material.
Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
Pls suggest if I missed any thing in this process.
Thanks in advance.
With Regards
Srinivas

Hello NiTiN J,
I will clear the confusion.
As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
In QA32 (2nd) inspection lot, which is created manually.
Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
I think I cleared the confusion.
Pls correct me if I am wrong or missed anything.
With Regards
Srinivas

Unable to see Inspection lot stock tab in UD??? how to make it appear?

Hello Friends
Some how i am getting three unexpected observation
1. Inspection lot stock tab in UD is not there.....how to make it appear so that i can do the quantity posting can be done.
For your information this is against good receipt & QA32 quantity to be posted is showing the qty correctly.....which means stk is in quality
2. In MMBE transaction i am not able to view batch & qty posting
3 In MB51 i can see the document details but qty is showing in unrestricted....which means stk in unrestricted which contractdory to my first statement.
Kindly let me know
1. How to make Inspection lot stock table available in UD
2 Any clue for 2 & 3 point if possible.
Thanks & Regards
Swanand

Thanks for reply
But the problem is not of stock going to quality or not.....anyway i checked it and it's correct.
Problem is i am not getting Inspection lot stock tab in UD.......here this inspection lot is created due to good receipt (inspeciton type 01)
My query is not yet answered
Thanks & Regards
Swanand

Inspection lot stock tab in UD

Dears
When i give UD system not taking to Inspection lot stock tab for entering qty to move to unrestricted or block stock
We manualy want to select the tab for entering qty to move to unresticted
were the setting need to be done
Faisal

I think you are talking about the stock posting proposal in the selected set.
in QS51 > selected the code group> go to codes> maintain a proposal against each code> Remove the proposal for automatic posting.
Then it will take you through the stock posting screen after you enter the UD code.

Display mode of storage location field in inspection lot stock tab in QA11

Hi Experts,
I want to maintain the storage location filed in display mode in Inspection lot stock tab in Transaction QA11
So please anyone can help me to solve this.
Regards,
Uttam Pal

I'm not sure I understood the question.
In the UD screen on the first page the storage location is shown in display mode. To change that you can use QAC2.
On the stock posting screen you can change the storage location the stock is being posted if desired. Usually most places don't have a need to change this and procedurally train their users not to.
If you wanted the stock posting screen to be display only, you probably have to use the screen editor to modify that which I don't think you really want to do.
You could use automatic UD's to process your ok lots and then take away the QA11/12 from most of your users. Then have only a few people trained to do the inspection lots requiring a manual UD. If these people change the storage location it would be a specific choice they made, not an accident. If this becomes a problem, they either need more training, or need to be fired.
FF

No "Inspection lot stock" tab in QA11

Hi,
Quality lot gets created for each Goods Receipt for material with Quality management active. For particular raw material we found that for last Goods receipt the quality lot got created as usual. But in QA11 we found that there is no "Inspection lot stock" tab whereas for the second last Goods receipt for the same material there is "Inspection lot stock".
What would be the reason?
With Best Regards,
Rajkumar

Hi,
Please refer: [No WM Posting Change created after Usage Decision for B stock].
QM does not suppoort Stock Posting for Special Stock like B, K.
Regards,

Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock

Hi Experts,
Please guide me for:
At the time of UD,sometimes i forget to enter the unrestricted stock quantity in inspection lot stock tab therefor quantity does not transfer into unrestricted stock and its shown in QI.So,i want to make it mandatory.please suggest me,How to do it?
Thanks & Regards,
Vivek Bhojak

Hi Vivek,
Please activate "Stock Posting in Background" indicator in Tx QS51 for your UD code as shown below -
This should solve your purpose and complete stock form QI will be posted to Unrestricted stock/Blocked stock. This is a safer process I always recommend.
Otherwise, in case you still wish to so UD posting form 'Inspection Lot - Stock Tab' manually, but want to make sure that is there is no quantity selected, then the UD shouldn't be done, then you will have to make enhancement appropriately below -
QEVA0001 Enhancement: Quantity posting for usage decision
Thanks,
Arijit
Message was edited by: Arijit Banerjee

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Custom Ribbon tab does not show in generic list

Hi.
I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
Thanks!
<Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
<CustomAction
Id=”Ribbon.MyTab”
Title=”Adds a new Ribbon tab to Generic List”
RegistrationType=”List”
RegistrationId=”100″
Location=”CommandUI.Ribbon.ListView”
>
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location=”Ribbon.Tabs._children”>
<Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
<Scaling Id=”Ribbon.MyTab.Scaling”>
<MaxSize
Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
Sequence=”15″
GroupId=”Ribbon.MyTab.MyGroup”
Size=”LargeMedium”/>
</Scaling>
<Groups Id=”Ribbon.MyTab.Groups”>
<Group
Id=”Ribbon.MyTab.MyGroup”
Sequence=”15″
Description=”"
Title=”My Group Name”
Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
<Button
Id=”Ribbon.MyTab.MyGroup.Button”
Alt=”Ribbon.MyTab.MyGroup.Button”
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
Image16by16=”/_layouts/images/siteIcon.png”
Image32by32=”/_layouts/images/siteIcon.png”
LabelText=”Button”
Sequence=”10″
TemplateAlias=”o1″
ToolTipTitle=”Button”
ToolTipDescription=”Shows a dialog” />
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition
Location=”Ribbon.Templates._children”>
<GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Layout Title=”LargeMedium”>
<OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
<OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
CommandAction=”javascript: alert('Hello World');” />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>

Hello,
I was able to use your custom ribbon tab XML just fine. The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not. Anyway,
after replacing those with straight quotes and fixing some other misc formatting, it worked fine. I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file. In SP, I created a new custom
list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML. Just look for red squiggles in the editor and fix them.
Regards,
- Kemp Brown [MSFT]

In iOS 7.0.2 All and Missed tabs are not showing call history correctly

In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My Option window in Firefox displays only partly. I can't change the download folder. 'Browse' is not showing. And the Advanced tab is not showing either

The Option Window in Firefox is incomplete. It only shows
General, Tabs, Content, Applications, Privacy, Security, Sync
The Advanced Tab is not showing and the Browse button to change download location is missing also.

If you are using an add-on theme switch to the default theme. If that isn't the source of your problem ....
Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Enhancement for QA32 Inspection lot stock tabs

Hello everybody:
   In QA32 user can do UD operation in "Characteristics" tabs and do Posting operation in "Inspection lot stock" tabs.
   phase 1: I use QEVA0010 enhancement to check UD in "Characteristics" tabs and it works.
   phase 2: I need to check the value of "To unrestricted use" field in "Inspection lot stock" tabs but I can't find enhancement to do that.
   In my company, some user can use QA32 to do UD and do posting. But some of them often do posting without UD. In QA32 there is only a warning message if you do posting without UD. So I need to check when user enter value in "Inspection lot stock" tabs some conditions must be satisfied (like UD).
Is there any enhancement to use for my issue? thank you.
ps. I have already tried QEVA0001. it doesn't wok.
attachment is the picture of warning message.

Hello,
Here i suggest you that if you are using Exit for UD then in that only just apply one code where program first will check the QAMR/QASR etc. all result table field w.r.t inspection lot and if fields found empty means no data or RR then system wont pass UD code for UD posting.
Or just make first MIC as required MIC and apply the code in that first MIC, if that MIC value is blank then again system wont allo UD.
Secondly, Status profile maintenance is also an another stdn way to execute the requirement.
Regards

Info tab does not show in iTunes 11.1.2 in iPad sync window

I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

I found the following in another discussion thread:
If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The Photo tab does not show up and no sync occurs

Trying to sync photos from iphoto to ipad and iphone. Photo tab does not show up in itunes under devices.

I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

UD Insp. Lot stock tab is not showing

Similar Messages

Maybe you are looking for