UD possible only for Batch mgmt active materials

Dear All,
I have a requirement where the UD/RR must be allowed for only batch managed materials.Is it possible.Can we create some user profile for this and do it.i.e for all materials where batch management is not active there should be no inspection possible.
Thanks to all in advance.
Regards,
Manisha

Hello Shyamal,
Thanks for your reply.But this is not possible as their part numbering system contains the quality no. of their material hence it is unique and cannot be changed.I had suggested in QA32 instead of using standard layout screen they can use the finish/amp screen which also displays the batch NO. for the inspection lot.So if Batch no. is absent here to do the reverse posting for that particular lot.
But I wanted to know if there is any status profile which exists or can be created for the same and that which can be used for this.
Regards,
Manisha

Similar Messages

AFAB IM document type is defined only for batch input

Hello Everybody,
With the new version ECC6, I have this message error : "document type is defined only for batch input" when I launch the monthly depreciation with AFAB transaction.
Thanks a lot in advance for your help !
Regards.

Hi
For this document type in OBA7, remove the check for 'batch input only'
Thank You,

Need BAPI for MR21 - ML active Materials

Hi Experts,
I am unable to find the BAPI for tcode MR21 for materails for which Material Ledger is active.
For ML active materials there are 3 tabs 1. company code currency 2. Groupd currency 3. Hard currency.
I need to update the standard price for all these 3 currencies using BAPI. Please let me know if any one knows the exact BAPI for this.
Answers are highly appreicated.
Thanks,
Sunil kairma.

closing thread for no answer

No request generated for batch status active/ inactive settings

Dear Experts ,
When is make the status "active " for batch in IMG , Logistics general , Batch management , Specify Batch Level and Activate Status Management,Define Batch Status management , THE SYSTEM DOESNT ASK FOR A REQUEST .
Plsease tell em if it is ok for the system to NOT TO ASK FOR A CHANGE REQUEST ?
IF yes , please let me know if we need to directly make the above settings in the [production server ???????
Regards
Anis

any response ?

Does SAP Provide any standard conversion program for Batch Managment activa

Hi,
An idea if SAP Provides any standard program to conversion of non batch managed material to batch managed material in a productive SAP Environment and close open documents,
It would be great help if somebody can reply to these queries.
Thanks in advance
Regards
Bijaya Pradhan

Hi
Use the same Driver program RIPROV00 which is used as Script driver program to fire the output from smartforms also
Only thing is little bit you have to modify the program such that it triggers the smartform instead of Script.
I think there is no smartform driver program for this IW21.
see some standard SF driver program like RLE_DELNOTE and
modify it and use it.
<b>Reward points for useful Answers</b>
Regards
Anji

PO Release Strategy - Only for Non MRP generated materials

Hello,
I have a requirement in which any material which was generated via MRP (via PR) should not go through a release strategy at the PO level, but a non MRP generated PR should...
Is this possible at all? I know its possible at the PR level, but not sure at the PO... Would this be a case where we would need to added a field to the CEKKO structure thats for MRP generated PRs ?
Thanks

Hi,
By business any PO created, should follow release procedure as PO a committed document which will further send to vendor.
If you are sure about your requirement, PO created from MRP PR should not follow release strategy, then no need to go for any User Exit.
Just create separate document type for PR (ZMNB) , create separate document type MRP PO( ZMNB) and link MRP PO document type ( ZMNB) with MRP PR document type( ZMNB) in flowing path:
SPRO>MM>Purchasing>Purchase Order>Define Document Types
Now select your ZMNB B Purchase Order Document type and click link purchase requisition document type in Dialog Structure, enter ZMNB Purchase Requisition Document type with a new entry & save.
As you created release characteristics of document type (CEKKO with BSART), then do not keep Value u201CMRP PO document type (ZMNB) u201Cin the release characteristics of document type and design your release strategies.
Now create your PO with MRP PO document type (ZMNB) and see no release strategy triggered.
Regards,
Biju K

SLED - Mandatory in MIGO for Batch Materials

Dear Gurus,
I want to make SLED field mandatory in MIGO.For that , i have changed in OMJ5 and now SLED is mandatory in MIGO.
But my requirement is , i want SLED mandatory only for BATCH materials.Now its asking mandatory for without batch materials also.
Can u plz tell me, how to do that.
thx in adv............

HI,
Do the following step.
1. Goto Tcode OMJX - select SLED/BBD and double click and select req.
2. T-code OMJ5 select movement type and select "Enter and check" (1) option
3. Goto MM02 and select "Plant data / stor 1 " view
tick the "Batch management" where is applicable batch and enter min. Rem. shelf life and total shelf life
untick the "Batch management" where is not applicable batch and remove min. Rem. shelf life and total shelf life
Try this it will be resolved your problem.
Regards,
PK.

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

Text Mandatory only for Certain Materials in Sales Order

Is there anyway so that I can make certain item text mandatory only for certain materials?
I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
Thanks in advance

Hi,
what you tried is correct and that is been followed in most of my projects wherever I worked. That is the best way recommended also.
If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
Regards

Materials available only for Purchase requisition creation

Hi Experts,
My client wants some materials available only for Purchase requisition creation and some materials donu2019t want available only for Purchase requisition creation.
How we can control
Thanks in advance,
Chandhu

1) Solve your issue first you have to bifurcate between the materials where requisition is possible & where not...u can do this by selecting some field which is not in use presently in material master-basic data view & maintain some unique value for those materials for which PR will be not possible....otherwise check whether you can bifurcate it through material groups or not...
After this take help of your ABAP person and implement BAdI::ME_PROCESS_REQ_CUST...here use the logic that after user enters the material code in PR system will check in the background what has been maintained in the said field in the basic data view of the material...if found blank then it will allow the user process further or if found any data in that field then system will stop the user from processing the same by throwing some customized error message.
2) Use the Plant-sp.matl status in purchasing view as Blocked for procment/whse for those material against which you don't want to create any PR.But this will be plant specific and both PR & PO will get blocked.
Regards,
Indranil

MRP - Create Planned Orders only for Externally Procured Materials

Dear All,
We have a scenario that our client gives us the daily requirement schedule for the current month and a monthly forecast for future months so that we can plan our externally procured materials based on the forecast.
Now I only want the MRP run to create Planned Orders for HALB and FERT based on my current months daily schedule and planned orders for ROH (Externally Procured) based on the next months forecast (monthly).
I dont want the system to create planned orders for HALB and FERT from the forecast. The requirement for the ROH are however derived from the Finished Good BOM and the forecast is also given for the FERT material. I know its a long shot but is there a possibility in the system to do such a thing or a work around?

Your business case is not clear; MRP will create planned orders for inhouse produced materials, and either planned orders or purchase requisitions for external procurement.
You can choose to convert or release external procurement for a long time ahead (eventhough taht if you have proper lead times defined you can release by lead time), but convert inhouse planned orders to production orders only for next period (week, month). Actually this is common practice.
So I fail to understand your problem.

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Open item mgmt activated for A/C with old program instead of new in NEW GL

Our version is ECC6.0 (EHP3) and activate NewGL, the open item management parameter for the account was forgot choosing during go live, Now the account have actual posting ,we can't tick open item management parameter directly. so we run these programs are ZFSEPA02 and ZFSEPA03.
the program run successfully and activated the Open Item mgnt but now this is giving error "document splitting error; no open items to processXXXX/XXXXXXXXX/XXXX", because these programs only for below ECC6.0, unfortunately couldnt run the new program which is suitable with NEW GL(ECC6.0)
checked even with FAGL_ACTIVATE_OP and OSS 175960 but there are other threads which are not suggesting this.
Please, valuable suggestions are needed, I know there are many threads which spoke about this but not in this same case.
hoping to solve this issue with great ideas from all SAP gurus.
awaiting for your reply
Edited by: YELLA REDDY sama on May 19, 2011 12:18 PM

Hi again Milind Sonalkar,
the note you specified (1309427) tells :-
"Solution
Use the log (transaction SLG1, object FAGL, subobject OPENITEM) to find the clearings specific to ledger groups. Use these documents as templates to manually make the return postings using transaction FBB1. If you require help with regard to the manual return posting, contact SAP Support and refer to this note."
with this I understand that for the account, the program(trns FAGL_ACTIVATE_OP) executed is not able to post to rest of ledgers except the leading ledger and need to post by manually in FBB1? what is return postings in the note?
for more information for the account used is a balance sheet account and has open items after execution of old program "Z"RFSEPA02. so while trying to clear them by F-03 it sends the above(in 1st port) mentioned error. Here I understand that first need to post(clear) manually to those open items which are posted before marking OI. am I right?, please enlighten me.

HT4865 When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone and i live in Holland, is this possible or only for the future?

When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone and i live in Holland, is this possible or only for the future?

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

Hi,,I forgot the icloud id and all information for this accound and i can't active my mobile please haw i can find my account i remember password only for may account.what is account linked my phone

hi,,,
I forgot the icloud id and all information for this accound brcouse my children forget it, i was restored my iphone naw is blocked and i can't active my mobile please haw i can find my account linked phone. i remember password only for my account i don't remember that exactly
please find it to me
thanks,,,
<Personal Information Edited by Host>

This is a user-to-user tech support forum, as explained in the fourm Terms of Use you agreed to when you joined. No one here can find your ID. See this:
Apple ID: If you forget your password
Apple - My Apple ID
Message was edited by: modular747

UD possible only for Batch mgmt active materials

Similar Messages

Maybe you are looking for