UD taken lots displayed wrongly in QA32&QA33

Hi QM Masters
     THe problem is when we execute the QA32 & QA33 with the Selection Lots without Usage Decision the inspection lots with status UD(Usage Decision made) has also appear in the list.
How it is possible? Do I have anything in my configuration side?
Regards
Mohan

Hi
  Thank you for your reply.
       I didnt select any selection profile while executing QA32&QA33 and I have selected "lots WIthout Usage Decision" in the List settings.But it displays Lots with system status UD also.How it is possible?
Is there anything I have to do with configuration?
Regards
Mohan

Similar Messages

  • Images are displayed wrong in firefox

    Hello!
    I am a photographer, uploading images in png to my gallery at deviantart.com. I noticed that the images are displayed wrongly in firefox - but in IE9 and Opera they are shown correctly. I have tried with different color management settings in about:config but none of that has solved the problem. I would like to know why it is that firefox can't show the colours correctly, like opera and IE?
    If it's impossible to fix I will just simply have to stop using firefox which would be a shame when I have been using the browser for many years. The problem has not existed earlier.
    Best regards

    http://kasperarts.deviantart.com/gallery/#/d2to4iq
    That image for instance. And I save them using Adobe RGB since thtat's the colour space I work in, but this has never been a problem before.

  • New lot not appearing in qa32 - v urgent

    Hi all,
    I have an urgent issue to resolve. we have developed a report that shows those batches
    -for which UD has been done 8 days before but no despatch till date  OR
    -for which no UD has been done and date of production is 8 days before from today.
    User wants that a new lot for above batches should appear for UD again in qa32.
    For this i have defined procedure as:
    1.  Run REPORT  Which will identify batches older than 8 days (from the days of production or last UD date).
    2.Go to QA07 Enter material codes, Batch numbers, and plant and select the option of Block Batch at lot creation.This will transfer all the mentioned batches to blocked stock and create an inspection lot automatically.simultaneously an inspection lot will start appearing in transaction QA32, against this batch for inspection.
    Now the issue is that after QA07, I can see in mb52 that stock of the batch move to restricted, but no inspection lot appears in qa32. a new inspection lot should appear in qa32.
    any ideas ? have i missed anything? i have also done changes in inspection plan,
    cant figure out what i missed. pls respond.
    Regards,
    Aisha Ishrat
    ICI Pakistan Ltd.

    Let me simplify my question:
    i have some batches in system for which UD had been done 8 days
    before but no despatch has been done against those batches.User
    want to give UD again for those batches.
    what i advised him to change the inspection plan of those
    materials by putting '9' in 'usage' and '4'in 'status' fields in
    qp01 and then go to qa07 and enter material codes, Batch
    numbers, and plant and select the option of Block Batch at lot
    creation.The batches automatically transferred to blocked stock.
    Now the issue is that after batches transferrence to block stock,
    new lot should appear in qa32 but its not appearing.any ideas??
    Have I missed any thing? Kindly give a prompt reply.

  • Mx Components displaying wrong the embedded Font

    Hi, I'm developing with Adobe Flash Builder 4.5 and I have a problem that the mx components displaying wrong the embedded font which is embedded in a css-file. But spark components have no problems with displaying the embedded font.
    thanks

    See the embedded fonts post on my blog.  The MX components default to a
    different embedded font subsystem.
    Alex Harui
    Flex SDK Team
    Adobe System, Inc.
    http://blogs.adobe.com/aharui

  • Fonts display wrong in Final Cut Pro

    One of the other editors in the office put together this piece and now I am making some changes to it on my machine. We're using the font "Baskerville" a common font that comes on the computer, and it is showing up correctly in the Font Book, but it is not showing up correctly in Final Cut Pro.
    There should be other options like regular, bold, semiBold etc, but there's only bold, italic, and bold italic.
    The other strange part is that when I first opened it on my computer it displayed wrong, and I tried reinstalling the fonts, and then it worked fine. I tried reinstalling the font again but it didn't help. I also tried restarting and that didn't help either. I checked in the Library > Fonts folder as well as the fonts folder under my user and the fonts match.
    Any suggestions as to what I could do?

    As far as I remember, Final Cut has always had this issue....
    I believe it has something to do with Final Cut only reading True Type (not Post script) fonts.
    That's why I only use Text for simple things like legals. For all other text uses, I use Photoshop...

  • Bug report : Navigator display wrong messages in package body

    Just run some code , you can see the Navigator display wrong messages in the package body,but the package work fine in sqlplus / toad or other tools.
    create or replace package SIMPLE AS
    Procedure simple_proc ;
    END;
    create or replace package body SIMPLE AS
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    END;
    Then open the package body in the Navigator (Connection Pane==> Connection Name ==> Packages ==> Simple Body ) , and show the error message:
    Unexpected token
    Missing Expression
    But if I just create the procedure out of the package , it work fine.
    CREATE OR REPLACE
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    /

    This has already been discussed a number of times (see http://forums.oracle.com/forums/search.jspa?objID=f260&q=Unexpected+token).
    As I understand it, it is related to the parser that SQL Developer is using to display the package decomposition in the navigator not coping with the full PL/SQL and SQL syntax (largely analytical functions from memory).

  • CMFCToolbar and CMFCMenubar displaying wrong tooltips

    Quastion asked also on
    http://stackoverflow.com/questions/29800791/cmfctoolbar-and-cmfcmenubar-displaying-wrong-tooltips
    Hello.
    I am using Visual Studio 2010, but I suspect the bug is still present on the 2013 version, as I compared the winfrm.cpp file and the OnToolTipText are exactly equal on the two files.
    The bug is happening always at the 7th, 8th or 16th element.
    Although separators count as elements for this counting, the tooltips do not appear over them.
    Element can be a textual MENUITEM, a POPUP menu or toolbar button.
    The string table defines are:
        #define IDS_SEVEN            7
        #define IDS_EIGHT            8
        #define IDS_NINE             9
        #define IDS_TEN             10
        #define IDS_ELEVEN          11
        #define IDS_TWELVE          12
        #define IDS_THIRTEEN        13
        #define IDS_FOURTEEN        14
        #define IDS_FIFTEEN         15
        #define IDS_SIXTEEN         16
    and the STRINGTABLE contents are:
        IDS_SEVEN           "Seven"
        IDS_EIGHT           "Eight"
        IDS_NINE            "Nine"
        IDS_TEN             "Ten"
        IDS_ELEVEN          "Eleven"
        IDS_TWELVE          "Twelve"
        IDS_THIRTEEN        "Thirteen"
        IDS_FOURTEEN        "Fourteen"
        IDS_FIFTEEN         "Fifteen"
        IDS_SIXTEEN         "Sixteen"
    So, when I hover with the mouse pointer the 7th, 8th or 16th element I get WRONGLY a tooltip displaying the string with that ID (Example:7th element displays "Seven").
    It happens with all my toolbars and all my menus with a sufficient number of items, including in the toplevel horizontal menubar.
    I discovered that the guilty function is:
    BOOL CFrameWnd::OnToolTipText(UINT, NMHDR* pNMHDR, LRESULT* pResult)
    as the nID local variable does not get the ABSOLUTE ID of the Command, but the POSITIONAL order of the button, starting with 1 instead of 0.
    If I would move the strings IDs out of that range, whenever a user wants to add new strings, the Visual Studio Resource Editor would see that space free and use it, filling it again. And the problem would happen again. So, it is not a valid solution.
    I could also define strings for all commands. But as we are maintaining four TFS branches at the same time and the change needs to go to all branches, this change would be potentially very dangerous when doing merges after.
    So, please what solution do you recommend to not display those stupid tooltips?
    UPDATE: I didn't copy the string table exactly as it was. It was like this:
        IDS_SEVEN           "Seven\nSeven"
        IDS_EIGHT           "Eight\nEight"
        IDS_NINE            "Nine"
        IDS_TEN             "Ten"
        IDS_ELEVEN          "Eleven"
        IDS_TWELVE          "Twelve"
        IDS_THIRTEEN        "Thirteen"
        IDS_FOURTEEN        "Fourteen"
        IDS_FIFTEEN         "Fifteen"
        IDS_SIXTEEN         "Sixteen\nSixteen"

    In the update I put a stringtable more similar to the one I had. I had not noticed before a common feature of 7, 8 and 16 th strings: they all had '\n' characters in their contents.
    I think nobody will create a menu with more than 512 menuitems nor toolbars with more than 512 buttons, so my solution was to change all strings containing '\n' characters with an ID below 512 to numbers above 512.
    And it works.

  • HTML formatted email with international content displays wrong character

    When reading HTML formatted email on the iPhone iOS4.1, it will sometimes display wrong characters.
    Comparing email source content from various html formatted emails I can see that;
    it displays incorrectly when:
    - HTML formatted content
    - Content type is marked as text/html with charset ISO-8859-1 (Latin1) which is the default html standard character encoding.
    - The international characters are not written in html conversion format, i.e. ø instead of ø
    It displays correctly when:
    - The content is marked as text/plain and encoded as Quoted-printable
    Anyway, the email which is display wrong characters on iPhone displayes correctly on OS X Mail app. Leading me to a temporary conclusion that it is a bug in iOS4.
    Can anybody confirm this?

    No matter which format you choose, you're sure to offend some recipients. Some people object to HTML, based on security or privacy concerns. Some prefer HTML because it's a more effective means of communication for some purposes.
    If your default composition format is HTML (or plain text), hold Shift when you click Write, Reply or Forward to switch the format to the opposite type, or if HTML is the default, select Options/Delivery Format/Plain text only in the Write window to make a one-off change.

  • Today's inspection lot not appearing in qa32 & so processing through qa02?

    Hi all,
    Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
    later on i processed the ud through qa02 only
    regards,
    Sanjana

    Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
    later on i processed the ud through qa02 only
    Dear as per my understanding give the exact material code,if batch managed give the batch also,give the lot created date etc and again check in QA32 as you saying you can able to access inspection lot through QA02 then it must be visible in QA32 also.
    Select the all inspection lots radio button in QA32 if still you couldn't able to find the lot in QA32 as UD might have already done.
    Cheers
    KK

  • JSP page display wrong time when compared to the server time

    Hi,
    This problem seems to weird but it is happening
    I have web application running where time is displayed in the page. In this application time is very critical. Currently, time is an hour behind the orginal time.
    I checked the server it is displaying proper time.
    As a matter of troubleshooting, I wrote a java program and run the program in the same server, where the application is running. The java program returns me proper time , but JSP is still displaying time an hour behind. To trouble shoot further, I created a test jsp page to just display the time and accessed the time and the jsp displayed wrong time as well, an hour behind.
    I am running[ tomcat 4.0.3 and j2sdk1.4.3 in suse linux enterprise server 9.0
    My Java program
    import java.util.*;
    import java.text.*;
    public class TestDate
    public static void main(String s[])
         try{
              DateFormat DF = new SimpleDateFormat( "dd/MM/yyyy");
    DateFormat DT = new SimpleDateFormat("hh:mm aa");
              SimpleDateFormat fmt=new SimpleDateFormat("HH.mm");
              Calendar cal= Calendar.getInstance();
              java.util.Date dt=cal.getTime();
              String curdt=DT.format(dt);
              System.out.println("Server Time" + curdt + "\n");
              int hh = cal.get(Calendar.HOUR);
              int mm = cal.get(Calendar.MINUTE);
              int aa = cal.get(Calendar.AM_PM);
              System.out.println("Time" + hh +":"+mm+":"+aa+"\n");
         }catch(Exception e) {
         e.printStackTrace();
    This display Time3:30:1
    My JSP Page
    <%@ page import="java.util.*,java.text.*"%>
    <%
    Calendar calen;
    calen = Calendar.getInstance();
    int hh=calen.get(Calendar.HOUR);
         int mm=calen.get(Calendar.MINUTE);
         int aa=calen.get(Calendar.AM_PM);
    %>
    <%=hh%> <%=mm%> <%=aa%>
    This display 2 30 1
    When I run Date in linux server it gives 3:30 PM EST 2004
    I am really confused, why this is happening, If you have any solutions or idea please post the solution.

    My guess is that the weirdness is caused by Daylight savings time.
    I will presume that you and the server are in the same timezone :-)
    Alternatively it could be caused by getting a different Locale.
    Try the following
    Print out "date.getTime()" value (ie long representing number of millis)
    They should be the same (or close) in both the app and in JSP
    Try simple date format in your JSP as well - what does that result in?
    Print the calendar object, and look for the difference.
    It might be in Locale, Timezone, or whether DST is set or not.
    Hope this helps,
    evnafets

  • When combine multiple PDFs into one, some letters are missing and display wrong letter

    Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

    I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

  • DB02 table space overview display wrong sizes

    Hi all
    I get this result when I run the transaccion DB02 and table space overview
    Tablespaces: Main data   (Last analysis: 13.12.2009 04:00:29)
    PSAPSR3                 55,000.00     2,458.31
    PSAPSR3700           44,980.00     2,128.50
    PSAPUNDO               5,060.00     4,921.94
    PSAPTEMP               2,000.00     2,000.00
    SYSTEM                                 880          14.38
    SYSAUX                                 340          20.75
    PSAPSR3USR                       20               14
    Its displaying wrong informaction. The correct its the informatcion below and I get with a detailed analysis.
    Tablespaces: Main data   (Last analysis: 21.07.2010 13:04:51)
    PSAPSR3                     75,000.00     4,352.13
    PSAPSR3700          44,980.00     1,634.44
    PSAPUNDO              5,060.00     4,752.81
    SYSTEM                                880     10.25
    SYSAUX                                360     23.5
    PSAPSR3USR                      20     13.31
    PSAPTEMP                          0     0
    I think is for the date of the last analysis, but I dont know how to update my table space overview analysis: i will appreciate it any one cant tell me how to update the analysis.
    Best regards.
    Edited by: Alvaro Olmos on Jul 21, 2010 8:16 PM

    To refresh the table space overview do :
    DB02 ->Refresh->there you will find two options choose second one
    And it will refresh the tablespaces.
    Or you can also schedule update stats job daily to update it automatically.
    Regards,
    Shivam

  • PR05 - amount display wrong

    hi
    in transaction PR05 (travel), when my travel expense is in another currency eg. Ugandan Shilling, the 'amount' field displays wrong amount.  for eg:  if I enter my expense as 100, it displays as 10000 and if i enter 325.50, then it displays as 32550.  Can somebody tell me how to fix this issue.
    thanks.
    K

    hi Ashok,
    I checked SU3.  My default decimal notation is 1,234,456.89. But still this problem persists. 
    May be there is some kind of issue with the prorgram in RPRTEF00 - Travel Expenses standard form.  Does any one know any issue with this program that was doing similar amount display problem as I described.  Pl help.
    thanks
    K

  • [SOLVED] Arch displays wrong time - 2 hours forward

    Hi.
    After package upgrade today and reboot, my clock displays wrong time - it's going 2 hours too fast.
    I didn't changed anything in rc.conf. BIOS clock is fine.
    I us localtime, timezone: Europe/Warsaw.
    How can I repair it?
    EDIT: I just used date to re-adjust my clock.
    Last edited by weakhead (2009-08-26 13:37:59)

    Same Problem, solved by setting "localtime" instead of "local" in rc.conf.
    I don't know what changed because it worked before. Maybe an update in scripts that did recognize "local" but doesn't anymore ?
    ++ B.
    EDIT : [2009-08-24 13:37] upgraded initscripts (2009.07-3 -> 2009.08-1) that may be caused by that initscripts update !
    EDIT 2 : It is the initscripts, I did not see I had a pacnew rc.conf
    Last edited by maxi_jac (2009-08-28 09:59:56)

  • Lyrics display wrong code

    When I use the software 'Tag&Rename3.2" or iTunes to edit lyrics(use ANSI or Unicode Code),the lyrics can display correctly in iTunes,but on the nano it display wrong code.I think the reason maybe the lyrics code is ansi code,but when I change it into unicode to paste into iTunes,and it can't display correcly on nano either.How can I do?
    iPod nano 4GB Black   Windows XP Pro   OS and iTunes 6 are Simflied Chinese(PRC)
      Windows XP Pro  

    this is an easy way for lyrics,
    first, find the lyrics on google.
    second copy and paste them into the lyics tab
    third click done.
    you dont really need a program for it and its much easier this way,
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Maybe you are looking for