UD without batch

Dear all,
I have met some problem about QM and PP interface, please help me take a look.
I created a process order for material, which has the been set Batch management, and then after release order, the inspection lot created which need to be batch managed. then, for some reason, I deleted the indicator of batch management in materila master, then did confirmation for order. the stock has been posted to Q-stock, which has to transfered to unrestricted stock by UD, but when I do the UD, there is a batch number must be entered.
could anyone give me a suggesion to post the stock from Q to unrestricted?
Thanks a lot.

Dear all,
Thanks for your reply, the problem has been fixed.
There are some differences with your understanding. the real situation is there is no batch entered when release PO, so there is also no batch in inspection lot, but the indicator of batch management is flaged when generating the lot. and then, the indicator was deleted, the PO was confirmed. therefore, when doing the UD, the batch has to be entered.
The problem has been fixed by changing the database table, deleted the filed "Batch management" in QALS.
Regards,
Benny

Similar Messages

Inspn For 103 Movnt Type UD Not allowing without Batch

Hi Experts
We have one scenario : For Incoming materials we are doing 103 GR Block stock and system
not asking any batch during MIGO.And after quality inspection (RR) 105 Block stock to unrestricted
(Here we are entering the batch). But before this we need to take UD for the lot
but system is not allowing me to do UD without Batch. For time being we are doing stock posting only.
Kindly advise me how can I take UD without Batch for 103 inspection lots.
Inadvance Thanks
Shiva Patil

Hi Vishal / Sanil,
The problem is QM don't want create this batch we have suggested this they want system should assign automatically. In 103 there is no such a way that MM can enter this batch. QM is asking we haven't entered the batch in 103 so we want this lot need to be close without Batch.
1) Which sap note is suitable for this kindly suggest me
Thanks
Shiva Patil

Stock ageing report without Batch Management

Hi Gurus,
My client wants a Stock ageing report. But my concern here is can we achieve this without batch management
According to my client, Inventory ageing report should show stock quantities and stock value as follows,
1. Below one year
2. Between one and two years
3. Above two years
We can accumulate the goods receipt as per Material document date and movement type according to the above age requirement.
But, can we track goods issues from the above age groups without Batch Management.
Experts Pls reply and If possible, pls explain how we can achieve this.
Thanks
NDS

As you already noticed not only the input (GR) but the output (GI) is also important.
The date of the GR is only one thing, but after that you received the goods in your SLoc you cannot make difference between stocks received at different times.
As your stock is not distinguished in the system as per the GR date you cannot say that which sub-stock has been consumed during GI.
So, without batch management you cannot achieve your goal in standard system.
Of course, physically you can realize your idea by putting labels on different batches - this would mean batch management physically and not in SAP.
If you use warehouse management you can use a workaround: the GR date is stored in the quants and this makes possible to track the age of the stock without batch management. Please check:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f83b5e4afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba

Material without batch in subcontracting.

Hi Experts,
               In our company we have activated batch management for some materials and some materials like packaging oil etc we have not activated the batch management. Both (with & without batch)the materials going outside to subcontractor and a 57f4 nor is generating for movement type 541. We can track the materials with batch by using their batch number for its purchasing document. Kindly explain me how to track materials without batch for its purchasing document(101). Our technical consultant is writing a program for that we are not getting how to get the goods receipt number of the material without batch which is consumed at subcntractor. Tell us tables also.
Thank you
Sap MM

Thanks for replying.
Yes our requirement is different. As we know when material coming back from subcontractor with final product, we are doing subcontacting goods receipt. The components suppose x&y is consumed for making material Z. In that for material x batch is active and for material y batch in not active. The material x by its batch number i can track it (101) Goods receipt nor. But for material y how to get it (101) goods receipt nor.   Is there any tables are there that from we can get material y goods receipt number. As batch is the common thing from purchasing to comsumption of a material.
Thank you
Sap MM

Inspection lot without batch no.

Hi
For 03 inspection type, inspection lot is creating without batch number, while doing UD it is asking for batch number.
Client will give the batch number only at GR. Im unable to clear the lot.
Please advise, how to create a inspection lot without batch number or clear the lot without batch number.
Note: I used freely defined inspection points for 03 lot.
Thanks&
Regards
Janardhanan

Hi
You need to apply SAP Note 146945 - Making usage decision for production lots w/o batch.
Also with the above note, you need to mentain the below setting,
In recipe
Recipe header> Quality Management> Partial lot assign: Partial lot not supported
Select Operation with QM active, go to details> Insp. point completion: Valuation
Thanks
Sachin

BBD / SLED in EWM without Batch Management ?

Hi
Can we have BBD / SLED functionality in EWM without Batch Management ?
The products are not batch managed but Best Before Date Or Shelf Life expiration is required.
Regards / Vinod Sedani

Hi Vinod.
Yes, it's possible to work with BBD / SLED without Batch Management.
You can find more relevant information in:
Checking the Best-Before Date or Expiration Date - Delivery Processing - SAP Library
Best Regards,
Felipe Tripodi

Process order confirmation through PI sheet without Batch no.

Hi Experts,
Can any body tell me how can we confirm the process order through PI sheet without batch no.? I know though COEBR we can confirm the order through PI sheet but it requires batch no. & We don't have batch managenent implemented.
Youe suggestions are valuable for me.
Regards,
Shivkumar Dachawar

To make GR for the order for materials without PI sheet.
1. Process instruction category PROD_2 - which does not require batch number. Tcode O12C
2. Assign this Process instruction category to your Control recipe destination for your plant - SPRO- > PPPI -> Process management -> Control recipe / PI sheets -> Contrl. rec. destination -> Define and setup
If you need more information let me know.

Sales of same material with and without batch

Hello Experts,
One of my requirement is
To sell single material from same plant
1)with batches and
2)Without batches
Will this be possible in R/3 and how?
Please suggest.
NVS

Hi Nikhil
It Depends on where did you activate the Batch management. If its activated at Plant level, then yes, its possible to maintain the batch for a single material in one plant and no batch in another plant.
But if you activated batch management at material level. then its not possible to have batch assignment in one plant and not in another.
If you have batch activated at material level. what you can do is create a dummy batch in the other plant and the actual batch in the original plant.
Hope this helps..
Thanks
Srini

Stock in mb52 without batch

There is some stock in one store showing in mb52(without batch), there is no entry in MCHB table while there is entry in MBEW against this stock, we want to remove this stock, Please advice how can we remove this stock.
Thanks
Deven Sharma

only batch stock is stored in MCHB,
if the material is not managed in batches, then the stock is in MARD.
MBEW has only the valuated part of the stock.
you can use a physical inventory ot make stock zero, you can issue it to cost center with 201 or to scrap with 551.
562 should only be used if you want reverse initial stock (which you entered mistakenly with 561, and you are still in go live phase. this movement should nto be used after a go live)
Edited by: Jürgen L. on Aug 12, 2011 9:28 AM

Link GI document to respective GR without batch mgmt and PS activated

Hi experts,
We run ECC 6 and have split valuation activated without batch management. We want to find out for each goods issue document, (GI to a capital order Acct Assigment) which is the corresponding goods receipt document. Is this possible. We do not have PS implemented and the PO are not account assigned too.
Please help if there's a solution in sight,,
Rgds,
KJU.

Hi,
Ans 1.
MB51            Material Doc. List
Ans 2.
KKAX            WIP Calculation for Order
KKAY            WIP Display for Order
Regards,
Sankaran

Material with Expiration date without Batch Management

Hi,
Is it possible to give the expiration date for the Material without Batch Management, during GR.
Aktar

Hi
please find below link. It may help you.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63349443a211d189410000e829fbbd/content.htm
regards
Srinivas

Certificates using serial numbers with material without batch assigned

Hi experts...how can i track serial numbers and inspection lots from roh material without batch assign but with serial numbers ? these roh materials were used in PO without batch assign to FERT material yet. Is possible use where-used list only to manage serial number or only using batch administration over the serial numbers ?
i will apreciatte any answer!
Regards
Marco Antonio Trois Endres

Hi ,
This seems to be a Material Management configuration question, I dont know if this will answer it
You will have to configure the Characteristics of your Material from a task list and transfer/Copy it to your Certificate profile,
there has to be a feature to enter the desired selection Criteria based on your question
Work with the security team if your MM_G and MM_S class objects can help open or close certain authroization objects to achieve your goal.
in one of the google search it states that
"This can be done from Extras Characteristics from your task list.
A dialog box appears for entering the selection criteria for the task list"
Will Need more security related information to help you on this.

Shelf Life without batch Management

HI.. Experts
Without batch management can I able to enable the shelf life option pls guide me

Hi
You can enable the Shelf life expiration option without batch management also, but its of no use.
When you activate SLED with out batch you cannot track the Shelf life expiry date anywhere.
When we activate batch management, while doing the delivery for SD,etc based on SLED,etc the batch can be shorted and picked. If we do not have batch management then the system picks the material randomly not based on SLED,etc.
Regards
S.Senthil

SLED Without batch management

Hello Gurus
How to implement Shelf life expire data concept with out batch management .
How to identify stocks , only based on Shelf life in Inventory managment ?
Any input will be highly appreciated
Thanks
Nick

Thanks for your input
Hi,Biju
Qn for you : Suppose if i receive 100 today with sled life 60 days , and tomorrow 100 with sled life 60 days, means total stock is 200.
How we came to know which stock contains 60 days and 59 days as on today. MMBE report will show 200 only, what we are going to gain by this ?
How a user knows about the SLED life ,In our case Date of Production and date of receipt will be same
Thank your Jürgen L. , Your point is valid
Without batch management it is unmanageable.
Is it any way to distinguish the stock by SLED life without batch managment ?
Is it possible to pull the delivery BY SLED days using FIFO through Inventory managment ?
Thanks for the valuable discussion

How to recieve material in different batches without batch configuration?

Dear Friends,
I have the following problem,
there is a commercial company that is not using batches. They want just for one materilal to recieve it in different batches but they do not want to have baches in SAP. All they want is for that material to be able to see in MMBE the remaining stock caracterised by the different batches, in order to be able to know the exact quantity remaining from each batch.
Is there any way to do this without using batches?
Thank you in advance

without having batch management you cant use batch
you can either use the manual work in execl or any external system
now to actiavte batches for the perticular material u need to tick for batch manangement in material master
u try following
fill the text field while doing GR
now ask ur abaper to create new code for checking stock and take ref of that unique text as a batch for the material stock
regards
kunal

SLED Without Batch?

1. Is SLED possible without activating batch management. If so, what reports are available to monitor materials that have expiration dates? I can't find a standard report in SAP that doesn't use batch.
2. If SLED is NOT possible without activating batch management, then what pieces of batch management must be turned on in order to use SLED?
We want to use SLED for a handful of materials that have an expiration date - things like rubber gaskets. We want to be able to monitor these materials so we know when they are nearing their expiration dates. I attempted to use MB5M but no results are returned.
Since we're not producing these items, I don't see where batch management serves any purpose for us. We're buying the items for use in our plants. I've configured SLED so that it is active and I've set the SLED-related fields in the material master for a couple of test materials. Even with this, when I run MB5M, I get no results.
Thanks for your help.
S

Susan,
you can use SLED if you have WM active, as the system has a way to track elements of stock but an IM only level it has no way to do this. For example if you receive a number of GRs and issue some stock, how does it know from which stock.
If it's IM level only then you can't use SLED in isolation, except as a function on receipt as per Jurgen's answer.
Regards,
Nick

UD without batch

Similar Messages

Maybe you are looking for