UDA and Attribute

Dears,
Appreciate your help if anybody can explain what are the difference between UDA and attribute dimensions in planning ?
Highlighting the Aggregation,sparse and Dense dimensions, and which ones can be refrenced in the data forms ?
Please note that i am working on version 11.1.2
Thanks in advance

does the documentation not provide enough information
UDA - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/uda_tab.html
Attribute - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/attr_man.html
This post will also be helpful :- how can we decide to assign a attribute or UDA to a member
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

UDA and Attribute rules

hi,
I am in the process of updating my essbase outline using load rules. I have succesfully loaded my first rule which maps the Hierarchy, however I am unable to load the Attribute and UDA properties into the outline.
Does anyone have any suggestions or know the steps on how to do this?
Thanks,

This is already discussed in the forum. please go through the below threads.
To build attribute dimensions
Re: Create Attribute Dimension by rule file
Re: dimension building
For the isuues in setting udas.
Re: Dim Build does not update all UDA values
Re: Building multiple UDAs via a build rule

How to test the UDA or Attribute of an ancestor member

Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...

You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.

Creation of Service Product with Set Type and Attribute

Dear All,
Please guide me with proper step by step process,
How to create the product with the set type and attribute for service industry in sap crm 7.0
Regards,

Hi Nitin,
Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
Since you are using CRM7.0, you can do all these activities using a POWER USER role.
For more information about Set types and hierarchies please refer the following help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
Hope this helps!
Regards,
Chethan

Difference between text data and attributes in master data?

Hello,
a charcteristic in BW maintains texts, hierarchies and attributes.
What exactly is the difference between texts and attributes?
Attributes describe master data like a customer. The country where the customer resides, the industry etc. describe and classify the customer. Attributes are not just the structure/metadata of the characteristics. They are also the content. The following table should visualize what i mean:
customer-no. | name
112 | mcpherson inc.
113 | donalds inc.
Texts contain contain the description of a characteristic. Texts define a characteristic. An example is the customers name. It does not describe the customer but defines him/her.
Is my understanding about these two parts of master data right?
What else except the customer's name belongs to the texts?
If I set up a characteristic like the customer in SAP BW, do I have to create an attribute "name". The name belongs to texts, not to attributes?? If I upload master data then, how does it work?
Thanks in advance.

Hi,
If your analysis includes country and region then country and region should be included in the Infocube.This is required because only if you include these characteristics then you can restrict your queries for country and region.You may need to select some particular countires/region and show the report.Then you have to restrict your queries to only those countries/region.This is possible only if you have these characteristic in your infocube.
I am just envisaging your model like this.
Characteristic in the Infocube
Customer
Country
Region
Customer Attributes
Customer Number (SID which is self generated)
Customer Address1,2 ,3
Registration No
Date of Registration
Deposit Amount
etc ...
Region Attributes
Region Number (SID)
Total Customers
Sale Office Address
Number of Sales Persons
Customer Attributes
Customer Number (SID)
Total Customers
Head Office Address
Number of Sales Persons
GDP
Total Population
So the conclusion is whichever entity you want to restrict or analyse should be a part of Infocube.It is very difficult to do analysis based on attributes as I mentioned in my earlier post that they are only "Display attributes" (u can just show that's it).
Yes!! there are methods available for analysis based on characteristics in attributes table and you have to do either with virtual characteristic or replacement path or with writing code in customer exits.But a good design and earlier study of all possible report combination and having a good design will avoid good amount of development time and changes.
I have suffered when I had only 0CALDAY in my cube and when I want to take a monthly analysis, I was unable to do it and then I have to redesign my whole cube.
Please anyone, correct me if I am wrong.
Regs
Gopi.

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

Dynamic Table control with context nodes and attributes?

Hi all
I have node and attributes in context. i want to create table dynamically using this node and attributes, can anyone give code how to do this???
Thanks
Madhan.

Hi
Go through this [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a3de18-ee00-2d10-bfb3-946d7e00fd91?quicklink=index&overridelayout=true].
Regards
Arun.P

CF10 CFML tag, functions and attributes autofill in Dreamweaver CS5.5

We have Coldfusion 10 and Dreamweaver CS5.5 in my company. We want to be able to see all the CF10 CFML functions, tags and attributes in the autofill when writing code. I have found an Adobe link to a download for them but it doesn't say what version of Dreamweaver is required for it to work. Can someone please tell me? Will it work with CS5.5?
(This window won't let me paste in the link I have but it's in the Coldfusion Support Center Downloads | Coldfusion 10 Devleoper Tools | Adobe Coldfusion 10 Extensions for Dreamweaver. Also note that we do have CS5.5 in my company but I don't have an install available for me to test so I'm hoping it will be easier to get an answer to this question here rather than obtain one....thanks)

This is what you are looking for : http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec1896 9-7fff.html
Download MXP from here : http://www.adobe.com/support/coldfusion/downloads.html#cf10devtools
Insatll and then launch Dreamweaver CS 5.5

Hiding methods and attributes while inheriting

Hello All,
This is kinda urgent. While making a subclass I want to block access to methods and attributes of super class when anone creates an object of sub-class. In my particular situation I cannot override the methods.
Let me explain it with an example:
I have a class A which contains an attribute of type Object. All the methods accept Object type parameters and act accordingly. Now I want to create a sub-class B which acts on Strings only. I can create a wrapper to class A but I want to add some behavior which is specific to strings and use rest of the behavior as in class A. I cannot override the methods of class A because they take Objects as parameters whereas in class B the same methods take string as parameters.
I hope you have understood the problem. Please reply ASAP.
Thanks in advance

Sorry the diagram turned out wrong. ObjectClass and StringClass are both supposed to be derived
from the AbstractBaseClass.
This method is one way to achieve what you want. You make an AbstractBaseList class that has only
protected methods that take objects.
To implement a generic Object version of this class you extend it and override the protected methods in
the AbstractBaseList class to make them public.
To implement a String list you extend the AbstractBaseList class and override the protected methods to
make them public (but change the type of the parameters).
The only problem with this approach is that the return types of the methods cannot be changed. Therefore
I recommend the AbstractBaseList implement a method called
protected Object getByIndex(int i) {
// do list type stuff in here
Then the ObjectList can implement
public Object get(int i) {
return super.getByIndex(i);
and the StringList can implement
public String get(int i) {
return (String) super.getByIndex(i);
In effect all you need to do is to implement wrapper classes that enforce type casting on the Object based
set/get values.
Another option is to use JDK1.5 with its generics classes. These effectivly allow you to specify which type of
object an instance of a class accepts.
Another question. What is the matter with the Collections classes provided in the JDK?
matfud

Element name and attribute completion in XML editor?

With either WebLogic Workshop 9.2.2 or 10.x, is it possible to get completion assistance on elements and attributes? It works in the JSP editor, but I need to know whether this will work for XML documents. For some of these namespaces, they are defined in JSF taglibs.

I tested this on an .xhtml doc. Right-clicking gives me these options:
* HTML Editor
* Text Editor
* System Editor
* In-Place Editor
* Default Editor
Is this perhaps a feature available in 10.1?

List of SQL tables and attributes used in SSRS reports

Hi,
I have around 450-500 reports deployed in SSRS reporting server.
All these reports are built on SQL from multiple databases, and these databases are having unnecessary tables and attributes.
My requirement is to clean the unused tables and attributes from the databases. For this, I need the list of SQL tables and attributes used in these 450-500 SSRS reports.
Is there any way to get this data?
Regards,
RK

Hi RK,
According to your description, you want to get a list of the tables and attributes used in all reports.
In your scenario, you can query the ReportServer.dbo.Catalog table to get Report name, data source name, dataset name, and query used in the dataset with query below:
WITH XMLNAMESPACES ( DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition', 'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner' AS rd )
SELECT ReportName = name
,DataSetName = x.value('(@Name)[1]', 'VARCHAR(250)')
,DataSourceName = x.value('(Query/DataSourceName)[1]','VARCHAR(250)')
,CommandText = x.value('(Query/CommandText)[1]','VARCHAR(250)')
,Fields = df.value('(@Name)[1]','VARCHAR(250)')
,DataField = df.value('(DataField)[1]','VARCHAR(250)')
,DataType = df.value('(rd:TypeName)[1]','VARCHAR(250)')
--,ConnectionString = x.value('(ConnectionProperties/ConnectString)[1]','VARCHAR(250)')
FROM ( SELECT C.Name,CONVERT(XML,CONVERT(VARBINARY(MAX),C.Content)) AS reportXML
FROM ReportServer.dbo.Catalog C
WHERE C.Content is not null
AND C.Type = 2
) a
CROSS APPLY reportXML.nodes('/Report/DataSets/DataSet') r ( x )
CROSS APPLY x.nodes('Fields/Field') f(df)
ORDER BY name
For more information, please refer to this similar thread:
Extract metadata from report server database
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Nodes and attributes

Hi,
I want to know that is there any restrictions to declare nodes and attributes that come under these nodes?
For Eg, the requirement is to create a miscellaneos invoice through a ABAP web dynpro screen.There are many fields like Vendor name , Invoice number, VAT etc.How i can group these in to nodes and attributes? It is as we like or is there any standards to group?
Regards,
Charumathi.B

hi charumathi.......
the attributes can be combined into any node you wish..
but if you are going to represent a table or need to have a set of values for a single attribute then put it under a node and mention the cardinality as 0...n. its always better to create an attribute under a node rather directly under a context, for attributes canoot be mapped directly from comonent controller. only nodes can be mapped. so it is always bettter to have attributes under nodes.
---regards,
alex b justin

CRMD_BUS2000108 - organizational unit and attributes for org. unit

Hi all!
As I'm customizing Lead creation (and in a second step lead generation)
I would like to receive tips about "selection of organizational unit and attributes for org. unit".
I expected that, by entering a BP number of a prospect or sold-to party, the organizational unit and its attributes would be displayed automatically on the tab "organization".
This is not the case. When I start the lead creation, there is a pop-up screen inviting me to choose the organizational unit. afterwards a pop-up screen for the attributes of the org unit. Only after setting a flag in both pop-ups, I see the actual "lead" transaction. When I enter a BP number, the sales assistant and sales rep are found automatically.
Could anybody please explain how to change the customizing?
I would like to see the lead transaction (create) first, enter a bp number and than have the org unit and its attributes, the sales rep and sales assistant found automatically.
Any usefull answer (would make my day ), will be rewarded.
Thank you very much for your suggestions and time in advance!
I. Van Acker

hi
this is happening because you have not done the org data determination in your transaction,just go to SPRO and there in org data determination ,you have many standard ORGMAN rules available which you can use which will pick the data according to the user ,BPs etc.
it will enable you to first give BP and then the org data will be driven automatically from the system according to the rule in org data determination.
so first go and use rule ,try using rule ORGMAN_12
then attach this rule to the org data profile and then add this org data profile to the transaction in basic settings in transaction where you have defined your lead transaction.
it will solve your purpose
best regards
ashish

Maintaining attributes, data source and attribute list in web UI

Hi
Can we maintain attributes, data source and attribute list in web UI level. We can do it in SAP GUI level but do we have the option of doing it on web UI level??
Regards
Aakshi

HI
data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
hey main thing is that when we design all the things our out put is reflected in both interface & most important thing is that 90% of our customization done in gui.only web_ui related customization done in web_ui.
for more details revert me back
debi prasad

Maintaining attributes, data source and attribute list in web UI level.

Hi
Can we maintain attributes, data source and attribute list in web UI level. We can do it in SAP GUI level but do we have the option of doing it on web UI level??
Regards
Aakshi

Hi Aakshi,
As far as I know,data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
If you need more assistance please do revert.
Regards
Varun Taneja

UDA and Attribute

Similar Messages

Maybe you are looking for