UDDI explorer login fails

I am unable to login to the WebLogic uddi explorer. The error that comes back
is:
An error has occurred
E_fatalError(10500): a serious technical error has occurred while processing the
request. 'Failed to create Request from xml, Incorrect XML encoding: null. Required:
UTF-8.'
The WebLogic command console has:
| SOAP Message could not be parsed as a UDDI Request. Original request follows:
| [<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs
i="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmls
oap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><env:Header
/><env:Body><get_authToken xmlns="urn:uddi-org:api_v2" generic="2.0" userID="adm
in" cred="admin"/></env:Body></env:Envelope>]
I have an application that may have cause this. On a fresh restart of WebLogic,
I am able to login to the uddi explorer. However (on a fresh restart again),
if I use my application and then attempt to login to the uddi explorer I get the
above errors. FYI, my application loads it's own soap.jar. Do you think that
would cause any problems?
Alvin

It worked. Do you have an idea what could have caused the problem?
Thanks,
Alvin
Bruce Stephens <[email protected]> wrote:
Hello,
Try starting the server with this command arg:
-Dweblogic.webservice.i18n.charset=UTF-8
It should force the UTF-8 charset required by UDDI.
HTH,
Bruce
Alvin Fajardo wrote:
I am unable to login to the WebLogic uddi explorer. The error thatcomes back
is:
An error has occurred
E_fatalError(10500): a serious technical error has occurred while processingthe
request. 'Failed to create Request from xml, Incorrect XML encoding:null. Required:
UTF-8.'
The WebLogic command console has:
| SOAP Message could not be parsed as a UDDI Request. Original requestfollows:
| [<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs
i="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmls
oap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><env:Header
/><env:Body><get_authToken xmlns="urn:uddi-org:api_v2" generic="2.0"userID="adm
in" cred="admin"/></env:Body></env:Envelope>]
I have an application that may have cause this. On a fresh restartof WebLogic,
I am able to login to the uddi explorer. However (on a fresh restartagain),
if I use my application and then attempt to login to the uddi explorerI get the
above errors. FYI, my application loads it's own soap.jar. Do youthink that
would cause any problems?
Alvin

Similar Messages

  • Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

    I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message: 
    "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
    I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB. 
    Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
    Thanks much! - Rookie DBA

    Hi IWAR,
    The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
    To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
    In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
    Expand the database in which to create the new database user.
    Right-click the Security folder, point to New, and then click User.
    On the General page, enter a name for the new user in the User name box.
    In the Login name box, enter the name of a SQL Server login to map to the database user.
    Click OK.
    Reference:
    http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to fix Login failed for user ''. (Microsoft SQL Server, Error: 18456)in windows 2008?

    Hi All,
    we are facing the Login fails issue .
    how to resolve the bellow error , could you please suggested the possible ways .. ASAP
    TITLE: Connect to Server
    Cannot connect to ..
    ADDITIONAL INFORMATION:
    Login failed for user '  domain\name'. (Microsoft SQL Server, Error: 18456)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
    BUTTONS:
    OK
    Log Name:      Application
    Source:        MSSQLSERVER
    Date:          10/6/2011 1:56:28 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          domain\name
    Computer:      
    Description:
    Login failed for user '  domain\name'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
    RAM

    I was hitting myself in the head with this problem for a couple of minutes.... Everything was fine on the DC and Domain itself.. I added the Domain admins Group Principal for which I am part of... I was getting this error  ... Long History... Short
     (Right Click and Run as Administrator took care of this for me..) UAC was the cause of the problem.
    Cannot connect to XX-DB-XX3.
    ===================================
    Login failed for user 'XXXXS\XXas'. (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
    Server Name: XX-DB-XX3
    Error Number: 18456
    Severity: 14
    State: 1
    Line Number: 65536
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

  • Enterprise manager & sql* plus login failed

    hi
    this is the problem i encountered yesterday:
    there are server_3 and rs_16 machines which are in D1 domain and server_1 in W1 workgroup. server_3 and rs_16 has no oracle software whatsoever and on server_1 8i database exists. other machines with 8i clients, all in D1 domain, succesfully connect to server_1.
    i installed 10g database on server_3 machine; after installation i created a database db1. after the database was created, i tried to start enterprise manager (EM) and it failed (the database is not mounted ....), and i found out that tns listener wasn't created during the installation. so i created tns listener and started EM again and browser showed the proper page (username and login). so i entered sys as username, pswrd (created during the installation) and connect as sysdba. when i clicked on login button, the page refreshed but nothing happened, the same page (login) was still opened. i tried to connect from rs_16 and the same thing happened. this happened using internet explorer for opening EM. i tried to login as system, sysman but all in vain.
    then i installed 10g on rs_16, created db2 database and found out that tnsnames.ora file was missing. created db3 as well, and all went ok. started EM, tried to login and the same thing happened as on server_3, browser just refreshed the page.
    also have to say that i tried to connect to databases using sql* plus and login also failed.
    also tried using administration assistent for windows and tried to connect to db3. when i tried to connect as sys acount (database authentication) login failed, but when i used os authentication i succeeded.
    then i tried to start EM from another machine rs_13 (D1 domain) using internet explorer and i succeeded, there was no problem at all. after all, i installed mozilla firefox (1.0.6) on rs_16 and succesfully started EM for any database i wanted. but have to mention that i still can't connect to any db using sql* plus.
    rs_13 setup:
    - win 2000 + sp4
    - ie 6.0.2600.0000IC
    and rs_16:
    - win xp + sp2
    - ie 6.0.2900.2180.xpsp_sp2
    server_3:
    - windows server 2003
    on every machine i was logged in as top administrator so i had any possible permission.
    could anybody answer these questions:
    1. why tnsnames.ora wasn't created?
    2. why tns listener wasn't created?
    3. why couldn't i start EM using ie on server_3 and rs_16 and could on rs_13?
    4. why did login fail using sql* plus and why can't i still connect to any db using sql* plus? is it a problem of assigning some privileges or something else?
    5. why did login fail using database authentication while succeeded using windows authentication in administration assistent for windows? what should i do to make it succeed? is this all problem due to ie browser, win security or oracle security?
    6. why microsoft is giving me a hard time with their security?
    thanks for help in advance
    hope this post will help someone else as well !!
    Message was edited by:
    uncle carmine
    Message was edited by:
    uncle carmine

    could anybody answer these questions:
    1. why tnsnames.ora wasn't created?
    2. why tns listener wasn't created?I think you cancel Network Configuration Assistan which would create tnsnames.ora and listener. I hope others help you with the other questions I have plenty of work
    Best Regards
    Krystian Zieja / mob

  • SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"

    Hi,
    Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
    some relevant config
    webvpn
    enable wan
    svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
    svc enable
    group-policy vpnpolicy1 internal
    group-policy vpnpolicy1 attributes
    vpn-tunnel-protocol svc
    tunnel-group admins type remote-access
    tunnel-group admins general-attributes
    address-pool sslpool2
    default-group-policy vpnpolicy1
    username myuser password 1234567890 encrypted privilege 15
    username myuser  attributes
    vpn-group-policy vpnpolicy1
    Debug:
    asa01# debug webvpn 255
    INFO: debug webvpn  enabled at level 255.
    asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_login_resolve_tunnel_group: tgCookie = NULL
    webvpn_login_resolve_tunnel_group: tunnel group name from default
    webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
    webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
    webvpn_portal.c:http_webvpn_kill_cookie[790]
    webvpn_auth.c:http_webvpn_pre_authentication[2321]
    WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
    webvpn_add_auth_handle: auth_handle = 17
    WebVPN: started user authentication...
    webvpn_auth.c:webvpn_aaa_callback[5138]
    WebVPN: AAA status = (ACCEPT)
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
    webvpn_portal.c:webvpn_login_aaa_resuming[3093]
    webvpn_auth.c:http_webvpn_post_authentication[1485]
    WebVPN: user: (myuser) authenticated.
    webvpn_auth.c:http_webvpn_auth_accept[2938]
    webvpn_session.c:http_webvpn_create_session[184]
    WebVPN: error creating WebVPN session!
    webvpn_remove_auth_handle: auth_handle = 17
    webvpn_free_auth_struct: net_handle = CD5734D0
    webvpn_allocate_auth_struct: net_handle = CD5734D0
    webvpn_free_auth_struct: net_handle = CD5734D0

    AnyConnect says:
    "The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
    The following message was received from the secure gateway: Host or network is 0"
    Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
    ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
    asa01# debug webvpn 255
    INFO: debug webvpn  enabled at level 255.
    asa01# debug http 255
    debug http enabled at level 255.
    asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_login_resolve_tunnel_group: tgCookie = NULL
    webvpn_login_resolve_tunnel_group: tunnel group name from default
    webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
    webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
    webvpn_portal.c:http_webvpn_kill_cookie[790]
    webvpn_auth.c:http_webvpn_pre_authentication[2321]
    WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
    webvpn_add_auth_handle: auth_handle = 22
    WebVPN: started user authentication...
    webvpn_auth.c:webvpn_aaa_callback[5138]
    WebVPN: AAA status = (ACCEPT)
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
    webvpn_portal.c:webvpn_login_aaa_resuming[3093]
    webvpn_auth.c:http_webvpn_post_authentication[1485]
    WebVPN: user: (myuser) authenticated.
    webvpn_auth.c:http_webvpn_auth_accept[2938]
    HTTP: net_handle->standalone_client [0]
    webvpn_session.c:http_webvpn_create_session[184]
    webvpn_session.c:http_webvpn_find_session[159]
    WebVPN session created!
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_remove_auth_handle: auth_handle = 22
    webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_allocate_auth_struct: net_handle = CE9C3208
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_allocate_auth_struct: net_handle = CE9C3208
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_allocate_auth_struct: net_handle = CE9C3208
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_allocate_auth_struct: net_handle = CE9C3208
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_allocate_auth_struct: net_handle = CE9C3208
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C3208
    webvpn_allocate_auth_struct: net_handle = CE863DE8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE863DE8
    webvpn_allocate_auth_struct: net_handle = CE863DE8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE863DE8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE863DE8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE863DE8
    webvpn_allocate_auth_struct: net_handle = CE863DE8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE863DE8
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C32C8
    HTTP: Periodic admin session check  (idle-timeout = 1200, session-timeout = 0)
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    webvpn_auth.c:webvpn_auth[581]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    WebVPN: session has been authenticated.
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_allocate_auth_struct: net_handle = CE9C32C8
    ewsStringSearch: no buffer
    Close 0
    webvpn_free_auth_struct: net_handle = CE9C32C8
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_allocate_auth_struct: net_handle = CC894AA8
    webvpn_session.c:http_webvpn_find_session[159]
    webvpn_session.c:webvpn_update_idle_time[1463]
    Close 1043041832
    webvpn_free_auth_struct: net_handle = CC894AA8

  • Login Failed error while creating a CR using Universe

    Hi,
    We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
    For ex universe name is : xyz
    Now i want to use this universe in crystal reports, we are using CR2008.
    I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
    After this when we click Ok it is giving an error message saying that Login Failed
    We are unable to get the solution for this anybody please guide us to solve this.
    Regards,
    Pradeep.B

    Have you checked out this article:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
    It has a section on troubleshooting Universe connections.

  • Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424

    My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
    solution.
    I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
    Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
    by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
    one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
    on the search server Search'
    Information Event ID: 18456 No description, here is the Details:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider
    Name="MSSQL$MICROSOFT##SSEE" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated
    SystemTime="2010-11-12T18:35:06.000Z" />
    <EventRecordID>491461</EventRecordID>
    <Channel>Application</Channel>
    <Computer>myserver.mydomain.local</Computer>
    <Security
    UserID="S-1-5-20" />
    </System>
    <EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>[CLIENT: <named pipe>]</Data>
    <Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
    </EventData>
    </Event>
    Two seconds earlier
    Information Event ID 17137 No description, here is the Details:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider
    Name="MSSQL$MICROSOFT##SSEE" />
    <EventID Qualifiers="16384">17137</EventID>
    <Level>4</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated
    SystemTime="2010-11-12T18:35:04.000Z" />
    <EventRecordID>491460</EventRecordID>
    <Channel>Application</Channel>
    <Computer>mysever.mydomain.local</Computer>
    <Security
    UserID="S-1-5-20" />
    </System>
    <EventData>
    <Data>ShareWebDb</Data>
    <Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
    </EventData>
    </Event>
    I get more 3760 errors than 2424's. However, the
    2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
    3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
    I've done a lot of
    web research on Sharepoint Errors 3760 and
    2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
    to BackConnectionHostNames as per:
    http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
    I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
    error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
    connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
    I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##ssee

    Thank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
    Issue:
    =========
    Receive event error 3760 and 6398 on SBS 2008
    Cause:
    ==========
    Issue was caused by incorrect Auto Close option for ShareWebDb database
    Solution:
    ==========
    1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
    NOTE: You must run it as administrator to perform steps below.
    2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
    3. Expand Database node and right click the ShareWebDb then choose properties.
    4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False.

  • In Portal Anonymous mode - Change password option not coming- login fails

    Hi Experts,
         We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
        But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
    Appreciate your help in solving this issue. I hope many would have faced similar situation.
    Thanks
    Yusuf

    Hi Yusuf.
    Do you use a standard or custom login module for your application?
    More likely the used login module does not have a logic that handles such scenario as a change of user's password.
    In this case you need to implement a custom module with a required functionality.
    Best regards,
    Aliaksandr Zhukau

  • CUPC 8.6.3 login failed

    I am running these versions of CUCM 8.6.2.10000-30, CUP 8.6.4.12900-2 and using CUPC 8.6.3.20802.
    Fully AD integration and AD authentication. All userids and passwords are operational.
    I keep getting login failed when I try to loginto Cisco Unified Personal Communicator in VOICE LAB ENVIRONMENT

    Hi,
    The following troubleshooting doc for CUPC should help
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#topic1
    Please check the following sections:
    Understanding the CUPC Boot-up Process
    Cannot Log In to the CUPC When Troubleshooter Shows All Green
    HTH
    Manish

  • I created a second email account with a password but when I try to get mail for it and I put in password it says login failed. Why? and how do I fix it.

    I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?

    Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
    Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
    Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
    check:
    Tools > account Settings > Server Settings
    username = full email address
    Please post info:
    In Thunderbird
    Help > Troubleshooting information
    click on 'copy text to clipboard'
    paste info in this question
    edit /remove all info on fonts and printers.

  • When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

    "[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
    After patches applied on patch Tuesday the database reports the above error. 
    All accounts are domain accounts and SQLServer uses Windows auth.
    DCDIAG show no errors
    All servers and DC have been restarted,
    Message in db log confirms the connection is being denied due to trust.
    Event log shows same rejection
    Protocols enabled: named pipes, tcpip, memory
    TESTS:
    PortQry: "
    TCP port 1433 (ms-sql-s service): LISTENING"
    Connect with domain admin accounts works from multiple clients systems to DB.
    Cannot connect with newly created domain admin account
    Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
    New standard user also fails to connect.
    NOTES:
    I removed the SSL patch and the IE security update to see if that was an issue.
    ¯\_(ツ)_/¯

    Has someone left the company or has an account of some nature been dropped/replaced?
    Please click "Mark As Answer" if my post helped. Tony C.
    Hi Tony,
    Srry but No.  We just installed the monthly updates.
    I went back and found I had missed removing a patch.  I missed the rollup for Windows Server 2003:
    Event Type: Information
    Event Source: NtServicePack
    Event Category: None
    Event ID: 4382
    Date:  3/12/2015
    Time:  12:26:04 PM
    User:  NETTEST\admin
    Computer: DATA1
    Description:
    Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
    After I removed that is still didn't work but after about five minutes it started working.
    I guess I ned to report that to MS after I research what might be changed to make the patch work.
    Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
    Thanks for replying.
    Well - maybe this will help someone else.
    Thanks again for replying Tony
    ¯\_(ツ)_/¯

  • Webvpn login failed

    Hi Everyone!
    I am configuring an asa 5520 (Software Version 8.2(5))  serveral clientless connection profiles and ACS 5.3 as an authentication server, this works well users on AD or local can establish a vpn connection without problem, but now i need to show just one profile (common for everybody) on the ASA portal and behind scene allocate to right connection profile depending on the authorization profile of the user, i followed the following document
    "VPN group lock using ACS 5.x.pdf", but it does not work as expected, it keeps showing "login failed"
    So i took a look on the ACS on radius authentication and  the user is authenticated, i did a debug aaa common 255, debug radius all
    everything seem to be ok, but when i use debug webvpn 255
    it shows me the following message
    asa# webvpn_allocate_auth_struct: net_handle = D0200040
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_login_resolve_tunnel_group: tgCookie = NULL
    webvpn_login_resolve_tunnel_group: tunnel group name from group list
    webvpn_login_resolve_tunnel_group: TG_BUFFER = SSLClientProfile
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
    webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
    webvpn_portal.c:http_webvpn_kill_cookie[790]
    webvpn_auth.c:http_webvpn_pre_authentication[2447]
    WebVPN: calling AAA with ewsContext (-780823792) and nh (-803209152)!
    webvpn_add_auth_handle: auth_handle = 529
    WebVPN: started user authentication...
    webvpn_auth.c:webvpn_aaa_callback[5320]
    WebVPN: AAA status = (ACCEPT)
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
    webvpn_portal.c:webvpn_login_aaa_resuming[3093]
    webvpn_auth.c:http_webvpn_post_authentication[1611]
    WebVPN: user: (john) authenticated.
    webvpn_auth.c:http_webvpn_auth_accept[3066]
    User came in on group he wasn't supposed to come in on!
    webvpn_remove_auth_handle: auth_handle = 529
    webvpn_free_auth_struct: net_handle = D0200040
    Any suggestion would be appreciated
    Thanks
    Jonathan

    Jonathan,
    The issue is clear, your users are not connecting to the right profile.
    Please check this out:
    ASA 8.x: Allow Users to Select a Group at WebVPN Login via Group-Alias and Group-URL Method
    The idea of having ACS authorization is to assign a specific group-policy according to probably Radius attribute 25, but if you have it working in conjuction with the "group-lock" feature, then you need to make sure that the users connect to the correct connection profile, otherwise the group-policy will not allow the connection.
    For instance:
    group-policy test attributes
         group-lock testGroup
    tunnel-group testGroup general-attributes
         default-group-policy test
    tunnel-group testGroup webvpn attributes
         group-url https://1.1.1.1/testGroup enable
    So if a user connects to a different profile which is not the testGroup and gets the group-policy named test, then the connection is going to be rejected.
    HTH.
    Portu.

  • Cisco Anyconnect "Login Failed"

    in debug ldap 255, i see this message:
    memberOf: value = CN=L-NOUSA-VPN_Access,OU=Security Groups,OU=NOUSA,OU=PROD,DC=wmh-ag,DC=org
    [378534]                mapped to Group-Policy: value = GroupPolicy_WM-Wisconsin
    [378534]                mapped to LDAP-Class: value = GroupPolicy_WM-Wisconsin
    and
    WM-Wisconsin# show run group-policy GroupPolicy_WM-Wisconsin
    group-policy GroupPolicy_WM-Wisconsin internal
    group-policy GroupPolicy_WM-Wisconsin attributes
     wins-server none
     dns-server value 10.155.17.246
     vpn-tunnel-protocol ssl-client
     default-domain value ABC-ag.org
    and
    WM-Wisconsin# show run tunnel-group WM-Wisconsin
    tunnel-group WM-Wisconsin type remote-access
    tunnel-group WM-Wisconsin general-attributes
     address-pool Anyconnect-pool
     authentication-server-group CA-LDAP-WM-AnyC
     default-group-policy NO_VPN_ACCESS
    tunnel-group WM-Wisconsin webvpn-attributes
     group-alias WM-Wisconsin enable
    When I try to login, it says "Login Failed"
    it is evident from ldap debug that group policy is getting mapped to user, still failed.
    When i change default group policy in tunnel group to GroupPolicy_WM-Wisconsin, it works !  but thats not the way i want....

    this solved he issue:
    group-policy GroupPolicy_WM-Wisconsin attributes
     vpn-simultaneous-con 10

  • Crystal reports "Database login failed" when using push method

    I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.

    What about following the troubleshooting steps as described in the blog;
    Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
                rpt.Load(rptPath)
    myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
    rpt.SetDataSource(myDataset)
    Copy the above created XML to your development system
    Open the problem report in the Crystal Reports designer
    In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
    In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
    Double click the u201CADO .NET (XML)u201D icon
    Browse to the location of the XML file you created in step (1)
    Click on the path to the XML. The <Update> button should enable
    Click on the <Update> button
    Typically, either of the following will happen:
    You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
    Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
    Ludek

Maybe you are looking for

  • Reg ABAP-XSLT mapping

    Hi All,        One of my inetrfaces i am using ABAP-XSLT mapping some times i am getting the following erre "Error while calling mapping program ZXXXX_XXX (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) No valid source context supplied" What

  • Pass parameter from page link to report

    <span><font face="Verdana, Geneva, Arial, Sans-serif" size="2">How can I pass 3 parameter values from a link on one page to a report or CrystalReportViewer.<br /><br />Report is a CR/VS 2005 web report in C#<br /><br />Parameter fields in the report

  • How to disable adobe reader in safari

    I am aware there is this thread on basically the same problem How can I regain Preview as my default PDF browser in Safari?. However my circumstances are a bit different. One of my content vendors uses FileOpen to lock their PDFs and that is why I ev

  • Crystal reports for visual studio 2010

    Since Visual studio 2010 came out, Crystal Reports is no longer included. I know that Crystal Reports is a free download for Visual Studio 2010, but it is not clear to me which download to use.  There are Downloads as follows: Complete Click once mer

  • Error @ MB1C mvmt ty 561

    While Posting the material @ MB1C, got the error : FIELD SELECTION FOR MOVEMENT TYPE561/ACCOUNT 300102 DIFFERS FOR EXT. GA AMOUNT IN LC (023) After assigning the GL a/c 300102 (Sales Revenue a/c.) with the event key GBB So unable to post the Material