Udev/dmraid not picking up all partitions of a fake RAID setup!

Hey all. I've been having a problem with my RAID setup in Arch. At first Arch wasn't picking up a partition on one of my arrays, (a single large NTFS partition on a 2TB array between two 1TB drives) but after re-creating the RAID array in the Intel Storage Manager I have a different problem. Arch now find the single large partition, but now /dev/mapper isn't populated with the other two partitions on the other array that my operating systems are on (Arch and Windows), when it used to just fine! The only thing I changed was re-creating the partition table on the other array, so I don't know what's going on.
Upon trying to boot, GRUB comes back with the error described on the wiki: https://wiki.archlinux.org/index.php/In … oot_device
However I can't boot into the fallback image either! This means that I can't apply the fix as described in the wiki.
I'm starting to think there is a limitation in Arch where it can only handle a certain number of mapper devices (seems to be 3), or maybe it only detects the partitions on the first detected array? Now that I recreated the partition table on the larger array, it seems like that's the array that's detected first in both a GParted live session and Arch. But in a live GParted session, /dev/mapper was fully populated with all of my disks and partitions... so why is it that Arch can only find the partitions on one of the RAID arrays?
If you guys need any additional information just let me know... I really want to get my Arch setup up and working so I don't have to use Windows all that often (only games that don't work well in Wine).

Please do not crosspost. Follow forum rules.
https://bbs.archlinux.org/viewtopic.php?id=124247
Closing..

Similar Messages

Udev/dmraid not picking up all partitions of a fake RAID setup! [EDIT]

Hey all. I've been having a problem with my RAID setup in Arch. At first Arch wasn't picking up a partition on one of my arrays, (a single large NTFS partition on a 2TB array between two 1TB drives) but after re-creating the RAID array in the Intel Storage Manager I have a different problem. Arch now find the single large partition, but now /dev/mapper isn't populated with the other two partitions on the other array that my operating systems are on (Arch and Windows), when it used to just fine! The only thing I changed was re-creating the partition table on the other array, so I don't know what's going on.
Upon trying to boot, GRUB comes back with the error described on the wiki: https://wiki.archlinux.org/index.php/In … oot_device
However I can't boot into the fallback image either! This means that I can't apply the fix as described in the wiki.
I'm starting to think there is a limitation in Arch where it can only handle a certain number of mapper devices (seems to be 3), or maybe it only detects the partitions on the first detected array? Now that I recreated the partition table on the larger array, it seems like that's the array that's detected first in both a GParted live session and Arch. But in a live GParted session, /dev/mapper was fully populated with all of my disks and partitions... so why is it that Arch can only find the partitions on one of the RAID arrays?
If you guys need any additional information just let me know... I really want to get my Arch setup up and working so I don't have to use Windows all that often (only games that don't work well in Wine).
EDIT: Changed post and title to reflect new problem after recreating the 2TB array
Last edited by pad76 (2011-08-11 13:15:36)

Does anyone know if I can damage my arch install by using mkinitcpio through a Debian live-cd? I'm going to try and use one to remake my initrd by chrooting using this guide: https://wiki.archlinux.org/index.php/In … oot_device
Basically the commands I'm looking to execute would be this:
# mount /dev/mapper/isw_ArchRaidPartition /mnt/
# mount -o bind /dev /mnt/dev
# mount -t proc none /mnt/proc
# mount -t sysfs none /mnt/sys
# chroot /mnt /bin/bash
(edit mkinitcpio.conf according to wiki, inserting the "sleep" hook)
# mkinitcpio -p 3.0-arch
So my question is would using the commands from a debian live distro work? I have to use debain since arch live-installs don't detect my arch raid partition, like how I described above. I also can't boot into fallback.

Revaluation not picking up all documents

Hi
The revaluation program is not picking up all foreign currency GRIR documents. I've checked and the exchange rates are different and the items are open, but when we run the revaluation program it skips certain documents. Has anyone ever come accross this issue?
Thanks

I think that you posted this on the wrong forum. This is the asset accounting forum. Revaluation usually refers to the revaluation of assets. I think that you are asking about currency revaluations. You shold post your question in the correct forum.

Reply all not picking up all email addresses

On a mail list email when I hit "Reply All" Mail app does not pick up all email addresses when composing a response to a non subscribed user. This also happens when using web mail in Safari. No problems on iMac.

last step on the process is a factory restore through itunes to see if its a software glitch, if that doesnt solve it, you iphone may need service
iTunes: Restoring iOS software

Payment proposal not picking up all documents

We have several credit memos for one vendor that are not picked up by the payment proposal run even though their due dates are within the payment run. These credit memos are manually created through FB60 and not through MIRO. In the payment proposal, the error log says "due items with currency USD, pmt method W - items total is >0". The same payment proposal picked up all other invoices (for the same vendor) correctly. These invoices have the same payment method as the credit memos and the credit memo due dates are prior to the payment date.
If anybody can point me in the right direction as to what to look for, I'd appreciate it.
rgds,
Lanny

Hi Ruslim,
Please refer below OSS notes:
Note 164835 - F110: Clearing credit memos and invoices
Hope this helps.
Pls assign points as way to say thanks

Lookout 6.1 Backup server not picking up all drivers for client links

We are running Lookout 6.1. We have a server and four clients, with one fo the clients acting as the backup server when the server goes down. We have been making loads of changes lately and decided to test by closing lookout on the server and we found the backup seemed to successfully pick up control, but while it had items we had created/ modified (buttons for modbus commands and feedback information from drives), it did not have the connection to the linked drives for command and feddback. while it was missing recent items it still had items present from years past that did function and feedback correctly, all things being on the same TCP/IP network. it seems we may not have all the correct info being backed up in a timely manner to the correct place on the backup server. Is the SQL file in the lookout\database folder an important part of this? can i simply shut down SQL processes via task manager and then copy the 1.15GB sql file over top of the 850MB sql file on the backup server? when instructed to have a COPY of the L4P primary file from the server computer in the standby computer, which one could it be. there are several, and the dates seem to be older. i am sure there is more...

The hypertrend use Citadel service to transfer the data between computer, while the live data is different, so your problem is probably in networking setting or firewall.
If you have firewall on either computer, follow these KBs.
http://digital.ni.com/public.nsf/allkb/0D7B86F4B4D19A5E86256F9A006EECB1?OpenDocument
http://digital.ni.com/public.nsf/websearch/8AE45BBFA1D7025E862570F200642FD8?OpenDocument
Lookout client software doesn't install MAX.exe, but if you have MAX.exe on the client computer, you can use MAX to check the connection. In MAX, try to view the remote trace.
You can also use the NI Hypertrend ActiveX object to check the connection. Create a client process with just a NI Hypertrend ActiveX object. Move it to client computer. Edit its properties and add a trace, then try to view the remote trace. See the attached screenshot. If the Citadel communication has problem, you will not see the database or the trace.
The ActiveX object doesn't fix the problem, but can tell you whether the remote connection is good or not.
Message Edited by Ryan.S on 11-14-2008 03:49 AM
Ryan Shi
National Instruments
Attachments:
1.JPG ‏71 KB

Gather_schema_stats not picking up all tables

My Oracle version is 9.2.0.5 and OS is unix on AIX 4.3
I am trying to Analyze all tables and indexes in my current schema using :
execute dbms_stats.gather_schema_stats(ownname=>null, cascade=>true);
However, out of the 29 tables that the current user owns, only 23 tables has LAST_ANALYZED to the date when this was run. 6 of the tables don't have a LAST_ANALYZED date.
What may be the reason that those 6 tables are skipped during analyze? They definitely belong to the same user and also they are not partitioned tables. Is there any place I can check ?
Thanks

You hit Bug#2453682
As workaround use dbms_stats.gather_tables_stats on object tables

Create Form not picking up all of the PDF checkbox fields.

I am using MS Word 2010 and Acrobat Pro X.
I have a Word template with a series of content control checkboxes that I am converting to PDF. Then I'm using Acrobat "Create Form" function to create a form with interactive checkboxes.
The checkboxes that are NOT indented in the Word template are getting picked up by Acrobat. Checkboxes that ARE indented are not getting picked up.
Can anyone tell me why or what I might do to correct this issue?
Thanks.

Thanks for the response. OpenOffice isn't really an option. I love that suite, and I use it at home, but my company is knee-deep in Microsoft Office. Have to be a good soldier, for now anyway.
As far as checkbox dependency, I was thinking I could write some javascript to sort through all the checkboxes in the form and make them all independent. Can you tell me which attribute or property I should be searching for?
As I wrote before, I need to get this to a point that it can be automated.
Thanks again.

Data Merge not picking up all data fields

Hi,
I've been having a problem, posted here: http://forums.adobe.com/thread/1217090
Essentially, I have been using the script 'CSV2Tables' to prepopulate simple 2 column tables with information drawn from a CSV data source.
The tables consist of a title, and a block of information about that specific subject. Many of the blocks of information I am importing also contain data tags (<<DataTag>>)
The plan is to use CSV2Tables to populate the tables, then change data source and run a normal ID Data Merge to replace all of the <<tags>> within the tables with information from a second CSV data source.
The problem is, CSV2Tables is importing the data and prepopulating the tables just fine, but the data tags that are found within each body of text are being picked up as plain text (as Peter Spier has pointed out, they are being drawn from a plain text stream rather than being dragged from the Mail Merge panel) so when I try to run the ID Mail Merge, none of the fields are found within my document.
My question is - is there a method, or script available out there that can essentially do a Find/Change within a document, and replace plain text that appears like this <<PlainText>> with a Data Tag that is recognised by ID, which will allow me to run a Data Merge?
I have been told to check out some of the commercial plugins available out there, but registering and setting up demo's would require me to contact our IT provider for each, and that would be an exhaustive process.
Any help is much appreciated.

Hi,
is modyfied
Array.prototype.find = function (string) {
    for (var s = 0; s < this.length; s++)
        if (this[s] == string) return s;
        return -1;
var mFrames, mFile, mDoc, mFields, mFieldsNames, mStory,
     mPlainTxt, mNameToCompare, mField_ID;
// edit this with proper .csv path
mFile = File(Folder.myDocuments + "/" + "Merge.csv");
mDoc = app.activeDocument;
mDoc.dataMergeProperties.selectDataSource(mFile);
mFields = mDoc.dataMergeProperties.dataMergeFields;
mFieldsNames = mFields.everyItem().fieldName;
mFrames = mDoc.textFrames.everyItem().getElements();
for (var i = 0; i < mFrames.length; i ++) {
    if (!mFrames[i].name.match(/TF\d*$/) ) continue;
    // script assumes a targered text boxes are named like: TF1, TF2...
     // (TF plus any integer) or just TF (no integer)
    // - they could have the same name
    // any other name exludes frame from this loop
    mStory = mFrames[i].parentStory;
    app.findGrepPreferences = null;
    app.findGrepPreferences.findWhat = "<<.+?>>";
    mPlainTxt = mStory.findGrep(true);
    for (var k = 0; k < mPlainTxt.length; k++) {
        mNameToCompare = mPlainTxt[k].contents.slice(2,-2);
        mField_ID = mFieldsNames.find(mNameToCompare);
        if (mField_ID > -1) {
              mField = mFields[mField_ID];
            mDoc.dataMergeTextPlaceholders.add (
                mStory,
                mPlainTxt[k].insertionPoints[0],
                mField
        mPlainTxt[k].remove();
script assumes a targered text boxes are named like:
TF1, TF2... (TF plus any integer) or just TF (no integer) -
- they could have the same name.
Jarek

Data loads is not picking up all records

Hello, wonder if anyone ever encountered the following problem. I've been trying to load a flat file to BPC and for a year now, we've had no issues. This time however, it seems that not all records were loaded, eventhough the status indicated the correct number of rows were successfully loaded. Any ideas what may be causing this? I've checked the conversion files, account dimension and nothing has changed. Any help with this is greatly appreciated. Ideas on how / where to check for potential trouble spots are all welcome.
Thanks in advance.
David

Hello,
If you are using the standard SSIS package import, the rejected record should be reported into the log file at the end. However, in order to see if there are rejected records or not, you can try to validate your transformation file using the same import file.
You can also verify also the temporary files generated into D:\BPC\Data\Webfolders\APSHELL_Sorin\Finance\PrivatePublications. In this way you can find the right calues imported into the cube.
How you check if data is loaded or not?
Best regards,
Mihaela

Music Manager 1.0 not picking up all my music from...

MY Music MManager v1.0 is only picking up some tracks from albums under scan. The ones not found are MP3 as were ones selected.

Can I add tracks to N73 using windows media player - if so how do I get Win Med Player to recognise the phone?

Generate accessors does not pick up all member variables

jdev 9052
i have a class containing the following member variables:
private String PrincipalName = null;
private String DisplayName = null;
private String Surname = null;
private String FullName = null;
private String Identifier = null;
private String Givenname = null;
private String Email = null;
private String RemoteAddress = null;
private String LoggedIn = null;
i right click in the editor and select generate accessors. The dialog pops up, but only has DisplayName, GivenName, LoggedIn and RemoteAddress. once i generate the accessors for these, it then says 'There are no methods to generate'
am i missing something here? why doesn't it recognise ALL my member variables??

If you have either Outlook 2007 or 2010 and are running Vista SP2 or higher, you can enter the events in Outlook. But the have to be entered on the iCloud calendar in Outlook, not a calendar from another external service such as Goigle (Gmail).

Wifi not picked up all the time

Hi there fellow users...hope you can help. I don't understand why my phone seems to drop its wi fi connection when i am at home. wi fi is fine laptop works with it and phone usually does but here's the problem....when iphone goes into sleep mode and i slide to unlock it is using either edge (or the other network i cant remember its name.... not3g) even though the wi fi signal is excellent. Sometimes it wont connect at all and i have to close the phone down and power up again. any ideas because this is seriously starting to annoy me!!
also why does it take hours for my phone to notify me that i have had an email in my yahoo account?
Thanks so much for reading any help much appreciated!!

When connected via wi-fi, the cellular network is always available in the background since visual voicemail messages are downloaded to the iPhone via the cellular data or internet network only.
Even though you may see the cellular data network briefly when waking your iPhone from sleep when connected via wi-fi, it should quickly reconnect to the network.
I suggest selecting your wireless network on your iPhone followed by selecting Forget This Network. Then reconnect your iPhone to your wireless network. If your wireless network is password protected, this will require re-entering the password for your wireless network.
Is your Yahoo account a free account accessed with your iPhone's mail client as a Push-IMAP account?
Yahoo has had some ongoing problems and if you are accessing your Yahoo account via IMAP or POP using Fetch, there have been some reported problems with Fetch access since firmware update 2.1 was released.

Not picking all open items at the time of out going payment(F-53)

Dear Experts,
I'm facing the issue at the time of out going payment(F-53)
At the time of vendor line item display system is showing open items but at the time of out going payment(F-53)
system is not picking the all open items it is picking only two items
Pls help
Regards
Hari Prasad

Hi Experts,
Thnx for Quick response
As per your instructions, I checked auto payment run here we have done successfully for vendor
Open items shown in FBL1N but these open items not coming at the time of out going payment
I checked SPL GL indictors also
Regards
Hari Prasad

Functional Area not picked

Hi,
I have major issue. I have activated functional area in FI and for Revenue accounts the functional area is defaulted from the GL account.
But for the month of August for few line items the functional area is not picked, therefore all you reporting are incorrect.
I have two questions;
A. How can only for certain line items functional area is not picked?
B. Is there any way to manually include the functional area for those line items?
Thanks
Gayani

Check the GL Account master data for changes at COA level. Also verify whetehr master data was ALE'd from other client that might have created this issue - check whether data was fixed with another ALE transfer.
Obviously you cant chagne existing documents. You may reverse and repost if possible.
Regards
Subodh

Udev/dmraid not picking up all partitions of a fake RAID setup!

Similar Messages

Maybe you are looking for