[UDev] No more uuidage for usb device ?
Since udev update, I haven't anymore symlinks in /dev/disk/by-uuid/ for my usb devices.. and I need them
/lib/udev/vol_id seem to have disappear too..
Help °o°
upgraded udev (141-5 -> 145-1)
I have still /dev/disk/by-uuid. But I have got problem too.
When I plug my usb external hard drive in, it took a long time to find it. And later I unplugged the drive, /dev/sdb /dev/sdb1 /deb/sdb2 /dev/sdb5 remains...
And my usb drive can't be found as /dev/sdc1 but only /dev/sdc, and it also remains after unplugging.
Another thing I noticed is that on boot, it took only 100ms the udev part, while it was 400+ms before.
Something changed in udev obviously.
Edit::
Just come and report back. After the second reboot after upgrading, my issue has gone.
Last edited by lolilolicon (2009-08-27 07:04:43)
Similar Messages
-
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
Here is the total error message:
"Because a USB devce was drawing too much power from your computer, one
or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device drawing too much
power has been disabled. Other devices may have also been disabled.
When you disconnect the device drawing too much power, your other USB
devices will be enabled again."
Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
It deactivates so i cannot use it.
I have tried:
Connecting the soundcard to my mothers mac -> it worked!
Connecting an external harddrive to my mac -> it worked!
so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
I don't know what to do! i really need this to work! anyone got an idea??Hi, ryankeenanrk.
Thank you for visiting Apple Support Communities.
I would recommend trying the steps in both articles below and test the results.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
Jason H. -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How to fix: "One or more of your USB device drawing too much power..."
Plugged my iPhone to do my usual download of photos off my phone into my iPhoto library so that I can edit them and post on eBay and Etsy. Suddenly, I'm getting the error message:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I'm surmising that it's because my USB cord (connected from my iPhone to MacBook Pro) might be damaged. It's not charging correctly. Keeps going on and off when plugged into wall or computer.
So, will buying a new cord this solve the issue? I have to get one anyway so I guess I'll find out!
Meanwhile, for tonight I'll have to do just email the photos to myself. Ugh.It should fix it. I would unplug all of your other USB devices from the computer and see if it continues with that error. If so, then certainly replace that cord (do it anyway since its having issues even in the wall)
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.
-
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?
Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3 -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
update to the above (my edit has disappeared !)
This appears to be a problem with the USB cable. I can make this message happen during a sync with itunes. If i lift the cable with my finger about a cm away from the join between the cable and the USB connector head of the cable I get this warning message each time I try. I must have a loose wire/connection in the cable.
Thanks -
how to fix "because a usb device was drawing too much power from your computer,one or more of your usb devices have been disable"?
Check to see if you have a bad cable. After rebooting, connect a new one and see if it works.
Maybe you are looking for
-
What is the last version i can use that still has MY TIMEZONE SETTING for ebay?
I upgraded to your newest version and lost the time zone setting thing so i tried your nightly devel tool thing and was crashing a hanging because of the amount of memory i think. So i got rid of that installed a 2 something version and now have it b
-
I've got a form that works fine on Windows in IE and Firefox. On the Mac, when clicking the submit button in Safari, the address bar flashes and then does nothing. Any thoughts?
-
Hi All. I am calling the getIdentityStoreFactory() method in the IdentityStoreFactoryBuilder class and I am getting the following error: oracle.security.idm.ConfigurationException: java.security.AccessControlException: access denied (oracle.security.
-
Today when i turned on my phone it was working fine. When i held down the "A" key to put it to sleep, i noticed that the 4 buttons on either side of the trackpad did'nt dim. (Back, Blackberry menu, answer call, & end call buttons). So i tried it agai
-
[Desktop][Other] Scroll bars need to be brighter
Hi - like others I'm not sure about the new shade of green, but I think the one real improvement needed is to lighten those grey scroll bars...the poor contrast against the dark background makes them very difficult to see particularly the right of sc