UDev rules as packages?
Hi everyone!
I've a Shuttle-Barebone with a LCD display for Freevo. Freevo includes a plugin to access this LCD display and shows some status information, unfortunately the permissions on the device are to restrictive.
To remedy the problem I've written (or better adapted) an udev rule to give users the permissions to write to the device:
/etc/udev/rules.d/82-vfd.rules:
SYSFS{idVendor}=="051c", SYSFS{idProduct}=="0005", MODE="0666", GROUP="users"
Is this a good way to give permissions, and would it be a good idea to provide a package in AUR with this, and similar, rules?
Thanks!
IMO a package is overkill for udev rules, unless you find yourself with dozens of them. Even then, they are likely to be specific to your requirements, and may not be of interest to many other users.
Just my €0.02 though - go ahead with the package if you wish.
Similar Messages
-
[SOLVED]Udevd fails to recognize rules in /lib/udev/rules.d
I've been having a few crashes since the update of udev earlier this week (so far only on my laptop where the Xserver hangs and requires a hard reboot to get anything working again). While investigating the logs, I ran across the following errors:
Oct 26 04:39:54 lswest-CULV [ 0.836513] udevd[74]: starting version 173
Oct 26 04:39:54 lswest-CULV [ 17.450369] udevd[260]: starting version 174
Oct 26 04:46:04 lswest-CULV [ 0.839752] udevd[74]: starting version 173
Oct 26 04:46:04 lswest-CULV [ 8.778232] udevd[259]: starting version 174
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/81-arch.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/95-keyboard-force-release.rules': No such file or directory
These errors have appeared since the 24th of October (the last marked update day for the udev package). I'm also slightly concerned about the first 4 lines, where udevd "starts" version 173 and then version 174. According to pacman -Q udev, only version 174 is installed.
Upon investigating the folder, I find that all the "missing" files are present:
[lswest@lswest-CULV: rules.d]% ls
total 652K
drwxr-xr-x 2 root root 4.0K Oct 26 11:01 ./
drwxr-xr-x 5 root root 4.0K Oct 26 11:01 ../
-r--r--r-- 1 root root 6.4K Aug 20 02:32 10-dm.rules
-rw-r--r-- 1 root root 505 Aug 16 19:06 10-vboxdrv.rules
-r--r--r-- 1 root root 1.3K Jul 7 2010 11-dm-lvm.rules
-r--r--r-- 1 root root 1011 Nov 13 2009 13-dm-disk.rules
-rw-r--r-- 1 root root 159K Nov 28 2010 40-gphoto.rules
-rw-r--r-- 1 root root 26K Oct 4 11:56 40-usb-media-players.rules
-rw-r--r-- 1 root root 764 Oct 19 23:43 42-qemu-usb.rules
-rw-r--r-- 1 root root 1.8K Jul 30 18:31 45-libnjb.rules
-rw-r--r-- 1 root root 219 Oct 19 23:43 50-firmware.rules
-rw-r--r-- 1 root root 3.5K Oct 19 23:43 50-udev-default.rules
-rw-r--r-- 1 root root 52K Jun 13 13:04 52-libmtp.rules
-rw-r--r-- 1 root root 104K Oct 5 23:42 53-sane.rules
-rw-r--r-- 1 root root 584 Oct 19 23:43 60-cdrom_id.rules
-rw-r--r-- 1 root root 1.1K Aug 3 18:54 60-pcmcia.rules
-rw-r--r-- 1 root root 616 Oct 19 23:43 60-persistent-alsa.rules
-rw-r--r-- 1 root root 2.4K Oct 19 23:43 60-persistent-input.rules
-rw-r--r-- 1 root root 947 Oct 19 23:43 60-persistent-serial.rules
-rw-r--r-- 1 root root 6.0K Oct 19 23:43 60-persistent-storage.rules
-rw-r--r-- 1 root root 1.4K Oct 19 23:43 60-persistent-storage-tape.rules
-rw-r--r-- 1 root root 770 Oct 19 23:43 60-persistent-v4l.rules
-rw-r--r-- 1 root root 46 Feb 9 2011 60-rfkill.rules
-rw-r--r-- 1 root root 166 Oct 19 23:43 61-accelerometer.rules
-rw-r--r-- 1 root root 369 Oct 17 15:34 61-gnome-bluetooth-rfkill.rules
-rw-r--r-- 1 root root 2.2K Sep 14 09:07 64-md-raid.rules
-rw-r--r-- 1 root root 40 Aug 12 18:32 65-kvm.rules
-rw-r--r-- 1 root root 4.0K Oct 4 09:34 69-cd-sensors.rules
-rw-r--r-- 1 root root 233 Jul 17 18:06 70-infrared.rules
-rw-r--r-- 1 root root 2.6K Oct 19 23:43 70-udev-acl.rules
-rw-r--r-- 1 root root 642 Oct 19 23:43 75-net-description.rules
-rw-r--r-- 1 root root 254 Oct 19 23:43 75-probe_mtd.rules
-rw-r--r-- 1 root root 642 Oct 19 23:43 75-tty-description.rules
-rw-r--r-- 1 root root 3.3K Aug 3 10:00 77-mm-ericsson-mbm.rules
-rw-r--r-- 1 root root 11K Aug 3 10:00 77-mm-longcheer-port-types.rules
-rw-r--r-- 1 root root 379 Aug 3 10:00 77-mm-pcmcia-device-blacklist.rules
-rw-r--r-- 1 root root 510 Aug 3 10:00 77-mm-platform-serial-whitelist.rules
-rw-r--r-- 1 root root 1.6K Aug 3 10:00 77-mm-simtech-port-types.rules
-rw-r--r-- 1 root root 3.0K Aug 3 10:00 77-mm-usb-device-blacklist.rules
-rw-r--r-- 1 root root 1.6K Aug 3 10:00 77-mm-x22x-port-types.rules
-rw-r--r-- 1 root root 9.3K Aug 3 10:00 77-mm-zte-port-types.rules
-rw-r--r-- 1 root root 284 Sep 20 09:26 77-nm-olpc-mesh.rules
-rw-r--r-- 1 root root 4.2K Oct 19 23:43 78-sound-card.rules
-rw-r--r-- 1 root root 559 Oct 19 23:43 80-drivers.rules
-rw-r--r-- 1 root root 667 Aug 3 10:00 80-mm-candidate.rules
-rw-r--r-- 1 root root 9.3K Aug 26 18:47 80-udisks.rules
-rw-r--r-- 1 root root 372 Oct 19 23:43 81-arch.rules
-rw-r--r-- 1 root root 335 Apr 4 2011 85-regulatory.rules
-rw-r--r-- 1 root root 602 Aug 4 17:39 85-usbmuxd.rules
-rw-r--r-- 1 root root 131 Aug 17 09:43 90-alsa-restore.rules
-rw-r--r-- 1 root root 83 Jan 10 2011 90-hal.rules
-rw-r--r-- 1 root root 1.9K Aug 9 15:18 90-libgpod.rules
-rw-r--r-- 1 root root 2.0K Oct 20 17:26 90-pulseaudio.rules
-rw-r--r-- 1 root root 847 Oct 4 09:34 95-cd-devices.rules
-r--r--r-- 1 root root 492 Nov 1 2009 95-dm-notify.rules
-rw-r--r-- 1 root root 3.0K Oct 19 23:43 95-keyboard-force-release.rules
-rw-r--r-- 1 root root 11K Oct 19 23:43 95-keymap.rules
-rw-r--r-- 1 root root 155 Oct 19 23:43 95-udev-late.rules
-rw-r--r-- 1 root root 2.8K Oct 3 13:17 95-upower-battery-recall-dell.rules
-rw-r--r-- 1 root root 1.2K Oct 3 13:17 95-upower-battery-recall-fujitsu.rules
-rw-r--r-- 1 root root 1020 Oct 3 13:17 95-upower-battery-recall-gateway.rules
-rw-r--r-- 1 root root 1.6K Oct 3 13:17 95-upower-battery-recall-ibm.rules
-rw-r--r-- 1 root root 774 Oct 3 13:17 95-upower-battery-recall-lenovo.rules
-rw-r--r-- 1 root root 1.1K Oct 3 13:17 95-upower-battery-recall-toshiba.rules
-rw-r--r-- 1 root root 1.6K Oct 3 13:17 95-upower-csr.rules
-rw-r--r-- 1 root root 6.0K Oct 3 13:17 95-upower-hid.rules
-rw-r--r-- 1 root root 354 Oct 3 13:17 95-upower-wup.rules
-rw-r--r-- 1 root root 1.4K Aug 1 12:20 97-bluetooth-hid2hci.rules
-rw-r--r-- 1 root root 28 Oct 7 2010 99-fuse.rules
Can anyone confirm this? If I get confirmation that this is indeed present for other users (and a bug, not a "feature"), I'll open a bug report for the udev package.
Also, semi-related, in the post-install message from the udev package they refer you to the folder /etc/udev.d/rules, however, that directory structure doesn't exist on my system, and the old /etc/udev/rules.d is still present.
I'd appreciate any information or input. If any further information is required, I'll gladly supply it.
Last edited by lswest (2011-10-26 09:54:58)Since the upgrade to 174, thunar doesn't mount anymore external hdd or usb. I removed my user from storage group.
Searching for solutions I find out that I have the same errors in the logs that lswest has.
/var/log/messages.log:
Oct 29 10:29:46 localhost udevd[75]: starting version 174
while /var/log/errors.log:
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/81-arch.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/95-keyboard-force-release.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/95-keymap.rules': No such file or directory
Edit: a fresh installation of udev seems stopping error message flooding in errors.log, but I still can't automount drives and reboot/shutdown with dbus-send method.
Last edited by oceans11 (2011-10-29 10:29:48) -
[Solved] Auto-open a file manager after mounting with udev rules
Hellooooo,
I followed the udev Wiki for auto mounting USBs and it now works great.
The only problem is: how can I automatically open a file manager of the mounted directory? I tried putting this at the end of the "ACTION=="add"," section in "/etc/udev/rules.d/11-media-by-label-auto-mount.rules" but for some reason nothing happens:
, RUN+="/usr/bin/dolphin /media/%E{dir_name}"
Even if I just try to open dolphin with the "ACTION=="add"," section nothing happens either way.
So what am I doing wrong?
Last edited by algorythm (2011-05-05 12:35:56)In that case, the best choice in my opinion is to use Automounting UDisks Wrappers :
devmon is a script developed by IgnorantGuru. He left Arch Linux, but the package in AUR is still there and is the last version. For a future new release, it should be available at his blog site. The script is distro independent.
My udisksvm script, in its default state, doesn't launch a file manager after automounting, but it is not a big thing to let the automounting be done and then manually open a file manager (a new entry in the traydevice right-click menu can also be added for that).
If you can do without automounting, there is also the bashmount script from jnguyen.
All these scripts don't require writing any udev rules, they use udisks instead.
I hope you could find something you like and which will suit your wishes. -
Udev update: udev.rules file contains errors [was: dbus+hal update]
I am aware of the fact that there are already a few topics and a bug report (http://bugs.archlinux.org/task/6351) concerning the recent dbus & hal upgrades. However, my case seems different and more complex. I am not even sure if this is directly related to the others' issues.
Since the update to dbus-1.0.2-2 my system does not follow some dbus rules any more. The recent follow-up update to dbus-1.0.2-3 did not remedy my problems, either.
I think that this is due to the /etc/udev/rules.d/udev.rules file having become corrupted with the recent updates. Under the sections
#pty and tty legacy devices
and
#vc devices
several KERNEL=[...] lines have errors, at least the final double quotation marks are missing!
So far my problems are as follows:
- Intel i810 video driver fails to load: "No matching device [...] found".
- Thinkpad's nvram is not get created in /dev
- no pty devices / no ttyp devices are created in /dev. Therefore, none of my X-based consoles will start. Konsole, for example, exits with "Konsole is unable to open a PTY [...]".
I will investigate further and report. Anyone eslse experiencing similar problems?
Btw., contrary to the experience of others, removable devices are recognized and mounted.
Last edited by mutlu_inek (2007-02-07 02:52:34)Those errors I found were actually introduced a few days ago by udev-105-1! The /etc/udev/rules.d/udev.rules provided by that package has errors!
Correcting those errors brought back my beloved pseudo teletypes in /dev/pts/X. But the nvram device is still not created.
Update:
Here is the diff output of udev-105-1's udev.rules compared with what it should be:
--- udev.rules 2007-02-06 21:20:06.000000000 -0500
+++ udev.rules_corrected 2007-02-06 21:16:36.000000000 -0500
@@ -143,8 +143,8 @@
SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
# pty and tty legacy devices
-KERNEL=="pty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule
-KERNEL=="tty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule
+KERNEL=="pty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
+KERNEL=="tty[a-z][a-z,0-9]*", NAME="legacy/%k", OPTIONS="last_rule"
# md block devices
KERNEL=="md[0-9]*", NAME="md%n", SYMLINK+="md/%n"
@@ -166,8 +166,8 @@
KERNEL=="vcs[0-9]*", NAME="vcc/%n", OPTIONS="last_rule"
KERNEL=="vcsa", NAME="vcc/a0", OPTIONS="last_rule"
KERNEL=="vcsa[0-9]*", NAME="vcc/a%n", OPTIONS="last_rule"
-KERNEL=="ptmx", MODE="0666", OPTIONS="last_rule
-KERNEL=="tty", MODE="0666", OPTIONS="last_rule
+KERNEL=="ptmx", MODE="0666", OPTIONS="last_rule"
+KERNEL=="tty", MODE="0666", OPTIONS="last_rule"
# video devices
SUBSYSTEM=="video4linux", GROUP="video"
Last edited by mutlu_inek (2007-02-07 02:44:24) -
3 unable to open '/etc/udev/rules.d/':m error during booting
After a recent upgrade to the kernel26-2.6.28.5-1-i686, I got the above error during booting in one of the laptop.
My search did not give any positive solution for this till now. I read that now udev gets its rules from /lib/udev/rules.d.
But still rules files in /etc/udev/rules.d and /lib/udev/rules.d are different. I know that any symllink work around will not work in this case, I tried but as expected the error message appears again.
So, I roll back to kernel26-2.6.28.4-1-i686 and everything back to normal.
Any Idea to resolve this? (package is not broken as I use the same mirror for another PC and in that I am not getting any error)
Last edited by kgas (2009-02-19 16:10:23)This issue got resolved on its own with the latest kernel (kernel26-2.6.28.6-1-i686) update. I will leave this topic for some more time to see others response...
-
Map scancodes to keycodes & udev rules
I followed the wiki here and here. My keymap file /usr/lib/udev/keymaps/chicony-kb-9805:
0xA0 www # 158 XF86WWW
0xA3 close # 214 XF86Close
0xB2 f13 # 191 XF86Tools
0x92 f14 # 192 XF86Launch5
0xB0 f15 # 193 XF86Launch6
0xA1 f16 # 194 XF86Launch7
0xAE previoussong # 173 XF86AudioPrev
0xA4 stopcd # 174 XF86AudioStop
0xA2 playpause # 172 XF86AudioPlay
0x99 nextsong # 171 XF86AudioNext
0xA6 volumeup # 123 XF86AudioRaiseVolume
0x9E volumedown # 122 XF86AudioLowerVolume
0x97 mute # 121 XF86AudioMute
0xA5 sleep # 150 XF86Sleep
I found my keyboard with $ /lib/udev/findkeyboards:
AT keyboard: input/event0
Then the command udevadm info -a -p $(udevadm info -q path -n /dev/input/event0) returns:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/platform/i8042/serio0/input/input0/event0':
KERNEL=="event0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/platform/i8042/serio0/input/input0':
KERNELS=="input0"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="AT Translated Set 2 keyboard"
ATTRS{phys}=="isa0060/serio0/input0"
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/platform/i8042/serio0':
KERNELS=="serio0"
SUBSYSTEMS=="serio"
DRIVERS=="atkbd"
ATTRS{description}=="i8042 KBD port"
ATTRS{bind_mode}=="auto"
ATTRS{extra}=="0"
ATTRS{force_release}=="369-370"
ATTRS{scroll}=="0"
ATTRS{set}=="2"
ATTRS{softrepeat}=="0"
ATTRS{softraw}=="1"
ATTRS{err_count}=="0"
looking at parent device '/devices/platform/i8042':
KERNELS=="i8042"
SUBSYSTEMS=="platform"
DRIVERS=="i8042"
looking at parent device '/devices/platform':
KERNELS=="platform"
SUBSYSTEMS==""
DRIVERS==""
I can successfully load the keymap with # /lib/udev/keymap input/event0 chicony-kb-9805 but I can't get it loaded automatically with an udev rule. When I try to apply the keymap to device '/devices/platform/i8042/serio0/input/input0/event0' , It doesn't load (/etc/udev/rules.d/98-kb-9805.rules):
SUBSYSTEM=="input", KERNEL=="event0", RUN+="/lib/udev/keymap input/$name chicony-kb-9805"
Nor does it load when trying to apply to device '/devices/platform/i8042/serio0/input/input0':
SUBSYSTEMS=="input", ATTRS{name}=="AT Translated Set 2 keyboard", RUN+="/lib/udev/keymap input/$name chicony-kb-9805"
How should the udev rule file look like for it to work? Thanks.I think I figured out a way to do it using udev, and I'll update the wiki page once I've tested it a bit.
Edit: All done, so now I can disable my hal daemon (big boot speed improvement ). Unfortunately I can't uninstall yet since hal-cups-utils has only recently moved over, and some packages still depend on the ancient gnome-vfs
Last edited by PirateJonno (2010-06-22 10:11:32) -
UDev rules not working for MidiSport 2x2 usb midi device
I installed arch a couple of months ago and am loving it so far. Any problems I've had so far have already been solved in the forums, but this one's really got me. I have a MidiSport 2x2 that I want the firmware to be loaded on everytime I plug it in. I installed (there's not an arch package) a package that is supposed to do just that. (It's called midisport-firmware-1.2.tar.gz). However, the package seems to be out of date (2006) and I even had to modify a couple places in the configure script to get it to work with current program revisions. However, once installed, it does nothing. It installed firmware files and udev rules for the device into a couple of directories. When I run the command that is supposed to load the firmware, it works fine. But for some reason, (I even checked the udev kernel log) it's like the event isn't even being triggered. Here's part of the original file that came with the package that's supposed to load the firmware:
# midisport-firmware.rules - udev rules for loading firmware into MidiSport devices
# DEVPATH=="/*.0" selects interface 0 only
# (some udev versions don't work with SYSFS{bInterfaceNumber})
# MidiSport 2x2
ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1001/*", RUN+="/sbin/fxload -s /usr/local/share/usb/maudio/MidiSportLoader.ihx -I /usr/local/share/usb/maudio/MidiSport2x2.ihx"
# vim: ft=conf
And here's what I modified it to in an attempt to make it work:
# MidiSport 2x2
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="1001", RUN+="/sbin/fxload -D /dev/%k -s /usr/local/share/usb/maudio/MidiSportLoader.ihx -I /usr/local/share/usb/maudio/MidiSport2x2.ihx"
I would really appreciate help from anyone who knows about this kind of thing, as I can't figure out what's going wrong. If it's something wrong with the config, please let me know. Actually, some HAL events popped up when I was testing this out. Is it possible HAL is blocking the udev event somehow?Hi,
The firmware files must be put in /lib/firmware so they can be found by the kernel. Are they being put there? -
After update Udev rule ignored: loading firmware of HP LJ 1020
Hi all
After one of the latest updates I have a problem with the udev rules. It worked some weeks ago perfectly. But after some updates of the past weeks it seems, that the rules in /etcudev/rules.d/11-hp-lj1020.rules are not triggered anymore. I cannot tell you the precise date as I update my mom's computer via ssh from another country and my mom told me weeks after that the printer is not working any more.
Was there any update of the udev package which is causing problems?
I read some threads and had also the problem, that renaming my network adapters does not work any more.
Issue was that "name" is deprecated in udev.
Best regards
MartinPotomac wrote:
check these bugreports :
https://bugs.archlinux.org/task/42505
https://bugs.archlinux.org/task/42353
it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )
there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :
https://bbs.archlinux.org/viewtopic.php?id=189622
https://bbs.archlinux.org/viewtopic.php?id=189324
downgrading to kernel 3.16.x is the workaround
I assume my computer is affected by one of these bugs. While I can get to the point where my window manager is loaded, everything almost immediately hangs (but doesn't freeze). Terminal windows become non-responsive and Chromium will refuse input. It's very weird. This happens with both of the 3.17 kernel updates but not in any of the 3.16 releases (including 3.16.7).
This is on an AMD system (cpu/gpu w/ open source driver). Overall 3.17 seems rather buggy. -
Hi !
A few days ago I did a pacman -ySu but I ran into some problems.
After updating xorg and catalyst graphic drivers my X was "broken" (xinerama/xrandr related issues). So before I did a 'pacman -ySu' I saved my local database with 'yaourt -B backup.tar.bz2', after trying to get X to work I decided to resotre the backup. To make it short, I think I completly messed up pacman. So after that I redid a 'pacman -ySu', but it was annoying me with the 'file exist' thing, so I did 'pacman -ySuf' which overwrited existing files. And I ended up with some "hidden" issues, like the 'core/dbus' package being installed (according to pacman), but files like '/usr/lib/libdbus-1.so' where missing (I had that for few packages, but since it only appers when I'm actually using theses packages, there might be a lot more to come). Reinstalling thses packages solves this problem.
So that was the context, in the case my problem could be related to this.
The problem is, I'm using AutoFS and udev to auto-mount my usb keys and external hard drive.
Udev creates a special node in '/dev/' (e,g, for my usb key it creates '/dev/usbstick') and AutoFS then automatically mounts /dev/usbstick to /media/key.
It used to work perfectly but after that upgrade (I also installed hal and acpid in the meantime), it doesn't seem to work. The node '/dev/usbstick' doesn't get created.
Here is the rule I'm using to do so:
/etc/udev/rules.d/07-key.rules
$>cat /etc/udev/rules.d/07-key.rules
ATTRS{product}=="Flash Drive", KERNEL=="sd?[1-9]", NAME="%k", SYMLINK+="usbstick", GROUP="storage"
ATTRS{product}=="USB Flash Memory", KERNEL=="sd?[1-9]", NAME="%k", SYMLINK+="usbstick", GROUP="storage"
So with this only, udev is supposed to create a node in '/dev/usbstick' right ?
But 'ls /dev/ | grep usbstick' returns nothing.
Udev is running correctly:
$> ps aux | grep udevd
root 818 0.0 0.0 1852 716 ? S<s 16:26 0:00 /sbin/udevd --daemon
Here is dmesg's output:
$>dmesg
usb 4-1: new high speed USB device using ehci_hcd and address 16
usb 4-1: configuration #1 chosen from 1 choice
scsi20 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
scsi 20:0:0:0: Direct-Access USB Flash Memory 1.00 PQ: 0 ANSI: 2
sd 20:0:0:0: [sdd] 3953664 512-byte hardware sectors (2024 MB)
sd 20:0:0:0: [sdd] Write Protect is off
sd 20:0:0:0: [sdd] Mode Sense: 0b 00 00 08
sd 20:0:0:0: [sdd] Assuming drive cache: write through
sd 20:0:0:0: [sdd] 3953664 512-byte hardware sectors (2024 MB)
sd 20:0:0:0: [sdd] Write Protect is off
sd 20:0:0:0: [sdd] Mode Sense: 0b 00 00 08
sd 20:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 20:0:0:0: [sdd] Attached SCSI removable disk
sd 20:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
And udevadm info's output:
$>udevadm info -a -p `udevadm info -q path -n /dev/sdd` | grep ATTRS{product}
ATTRS{product}=="USB Flash Memory"
ATTRS{product}=="EHCI Host Controller"
Thanks!
Last edited by arsenist (2008-12-14 19:30:26)Could this be a bug?
The issue persists in kernel26-2.6.32.4-1 and I don't know if I should report it as a bug. -
Curious thunar - autofs - udev rules behavior
I've just set up autofs and udev ruls to get my usb devices automounting, and everything automounts fine. The only issue I'm having is that my w800 doesn't automatically show up in the thunar sidebar (but it does automount). All other devices automount, and show up in the sidebar.
It's worth noting that my w800 memory stick is wonky as all getout, and sometimes when I plug it in, dmesg tells me:
scsi 29:0:0:0: Direct-Access Sony Eri Memory Stick 0000 PQ: 0 ANSI: 0
sd 29:0:0:0: [sdc] 8005632 512-byte hardware sectors (4099 MB)
sd 29:0:0:0: [sdc] Write Protect is off
sd 29:0:0:0: [sdc] Mode Sense: 00 6a 00 00
sd 29:0:0:0: [sdc] Assuming drive cache: write through
sd 29:0:0:0: [sdc] 8005632 512-byte hardware sectors (4099 MB)
sd 29:0:0:0: [sdc] Write Protect is off
sd 29:0:0:0: [sdc] Mode Sense: 00 6a 00 00
sd 29:0:0:0: [sdc] Assuming drive cache: write through
sdc:
and there's no /dev/sdc to be found. damn thing's partitioned anyway.
Anyway, my files are as follows:
/etc/udev/rules.d/10-user.rules
BUS=="usb", ATTRS{serial}=="356554005531070_0", KERNEL=="sd?1", NAME="%k", SYMLINK+="w800", GROUP="storage"
BUS=="usb", ATTRS{serial}=="00000000-00000000-3878b387-c905fa0c-00000000", ATTR{size}=="15666600", KERNEL=="sd?1", NAME="%k", SYMLINK+="sansa", GROUP="storage"
BUS=="usb", ATTRS{serial}=="00000000-00000000-3878b387-c905fa0c-00000000", KERNEL=="sd?1", NAME="%k", SYMLINK+="sansa_card", GROUP="storage"
# Symlink USB keys
SUBSYSTEMS=="usb", ATTRS{serial}=="0000000000017D", KERNEL=="sd?", NAME="%k", SYMLINK+="shazam", GROUP="storage"
SUBSYSTEMS=="usb", KERNEL=="sd?1", NAME="%k", SYMLINK+="usbstorage", GROUP="storage"
/etc/autofs/
shazam -fstype=auto,async,nodev,nosuid,umask=000 :/dev/shazam
w800 -fstype=auto,async,nodev,nosuid,umask=000 :/dev/w800
sansa -fstype=auto,async,nodev,nosuid,umask=000 :/dev/sansa
sansa_card -fstype=auto,async,nodev,nosuid,umask=000 :/dev/sansa_card
usbstorage -fstype=auto,async,nodev,nosuid,umask=000 :/dev/usbstorage
/etc/fstab (to allow easy umounting from thunar or whereever):
/dev/shazam /media/shazam vfat rw,user,noauto,group,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 0 0
/dev/sansa /media/sansa vfat rw,user,noauto,group,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 0 0
/dev/sansa_card /media/sansa_card vfat rw,user,noauto,group,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 0 0
/dev/w800 /media/w800 vfat rw,user,noauto,group,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 0 0i
p
/dev/usbstorage /media/usbstorage vfat rw,user,noauto,group,flush,quiet,nodev,nosuid,noexec,noatime,dmask=000,fmask=111 0 0
Is there anything I appear to be doing wrong, or is it just my w800 being a crapweasel? I like having this automounting while not having to use a DE. I really don't use my w800 much anyway, due to the crappy memory card thing, but this is hurting my geek pride.
Thanks!While I have no personal experience with it, I do know that there is a pkg specifically for mounting and/or making removable media visible to thunar. It's called thunar-volman, available here:: http://archlinux.org/packages/12374/
FWIW, I got ALL the above by doing a pkg search at archlinux.org, for: thunar -
[SOLVED]system fails to boot since adding udev rules for automounting
Hello
I have recently been trying to use udev rules to automount, and putting together stuff from the wiki, forums and general googling around have produced the following set of rules:
# automounts usb hdd and pendrives as usbhd-sdx; no messing around with
# volume labels or other confusing stuff
# matches all sdx devices except the internal hdd, sda
KERNEL=="sd[b-z]", NAME="%k", SYMLINK+="usbhd-%k", GROUP="users", OPTIONS="last_rule"
# imports filesystem information
ACTION=="add", IMPORT{program}="/sbin/blkid -o udev -p %N"
# creates mount points and sets up symlinks
ACTION=="add", KERNEL=="sd[b-z][0-9]", SYMLINK+="usbhd-%k", GROUP="users", NAME="%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/mkdir -p /media/usbhd-%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/ln -s /media/usbhd-%k /mnt/usbhd-%k"
# global mount options
ACTION=="add", ENV{mount_options}="relatime"
# filesystem-specific mount options (777/666 dir/file perms for ntfs/vfat)
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},gid=100,dmask=000,fmask=111,utf8"
# automount ntfs filesystem with ntfs-3g driver
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_TYPE}=="ntfs", RUN+="/bin/mount -t ntfs-3g -o %E{mount_options} /dev/%k /media/usbhd-%k", OPTIONS="last_r$
# automount all other file systems
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_TYPE}!="ntfs", RUN+="/bin/mount -t auto -o %E{mount_options} /dev/%k /media/usbhd-%k", OPTIONS="last_rule"
# unmounts and removes the mount points
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rm -f /mnt/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/umount -l /media/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rmdir /media/usbhd-%k", OPTIONS="last_rule"
This seemed to be working very well unitl I tried to boot this morning and the boot process stopped at "processing UDev events" with the following message:
iTCO_wdt: Unexpected close, not stopping watchdog!
It pauses at this point for 10-15 seconds and then reboots.
Having searched a bit, I found the following similar post on the forums: http://bbs.archlinux.org/viewtopic.php?pid=459375
Which suggests that the problem might lie with this line:
ACTION=="add", IMPORT{program}="/sbin/blkid -o udev -p %N"
I have renamed the file so that it no longer has the udev .rules extension and now the system boots fine. Does anyone have any suggestions as to why the above rules might be causing this behaviour and how I might go about fixing it?
Thanks
Last edited by useradded (2010-07-02 22:58:14)Hey falconindy
That was the final kick up the logical a$$ that I needed to get some kind of grip on udev rules. I now have a fully functional rule that applies only to /dev/sdxy and not to everything else as well, so no more boot trauma, THANK YOU.
I will mark this thread as solved and post my new rule for the benefit of anyone who might read this.
New rule (no boot problems):
# automounts usb hdd and pendrives as label or as usbhd-sdxy if no label present
# ensures the following is _only_ run for sdxy devices excluding internal hdd, sda
KERNEL!="sd[b-z][0-9]", GOTO="personal_usb_automount_settings_end"
# imports filesystem information
# provides access to following variables:
# ID_FS_UUID; ID_FS_UUID_ENC; ID_FS_VERSION; ID_FS_TYPE; ID_FS_VERSION; ID_FS_LABEL
# accessible via ENV{variable}; $env{variable}|%E{variable}
IMPORT{program}="/sbin/blkid -o udev -p %N"
# Get a label if present, otherwise name usbhd-%k
ENV{ID_FS_LABEL}!="", ENV{dir_name}="%E{ID_FS_LABEL}"
ENV{ID_FS_LABEL}=="", ENV{dir_name}="usbhd-%k"
# creates mount points and sets up symlinks
ACTION=="add", SYMLINK+="%E{dir_name}", GROUP="users", NAME="%k"
ACTION=="add", RUN+="/bin/mkdir -p /media/%E{dir_name}"
ACTION=="add", RUN+="/bin/ln -s /media/%E{dir_name} /mnt/%E{dir_name}"
# global mount options
ACTION=="add", ENV{mount_options}="relatime"
# filesystem-specific mount options (777/666 dir/file perms for ntfs/vfat)
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},gid=100,dmask=000,fmask=111,utf8"
# automount ntfs filesystem with ntfs-3g driver
ACTION=="add", ENV{ID_FS_TYPE}=="ntfs", RUN+="/bin/mount -t ntfs-3g -o %E{mount_options} /dev/%k /media/%E{dir_name}", OPTIONS="last_rule"
# automount all other file systems
ACTION=="add",ENV{ID_FS_TYPE}!="ntfs", RUN+="/bin/mount -t auto -o %E{mount_options} /dev/%k /media/%E{dir_name}", OPTIONS="last_rule"
# unmounts and removes the mount points
ACTION=="remove", RUN+="/bin/rm -f /mnt/%E{dir_name}"
ACTION=="remove", RUN+="/bin/umount -l /media/%E{dir_name}"
ACTION=="remove", RUN+="/bin/rmdir /media/%E{dir_name}", OPTIONS="last_rule"
# exit
LABEL=="personal_usb_automount_settings_end"
Last edited by useradded (2010-07-02 22:59:20) -
[SOLVED] udev rule no longer working
I have a udev rule set up to automatically mount an ext4 filesystem when I plug a certain thumb drive in. It was working fine until yesterday (probably due to updates). Here is the rule, in file /etc/udev/rules.d/99-gfk.rules:
KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", SYMLINK+="gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mkdir /media/gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mount -t ext4 -o ro,nosuid,nodev,noexec,noatime /dev/gfshare /media/gfshare"
The symlink and the mkdir command are both working fine, but the mount command is not being run for some reason. If I manually run the mount command it works fine. Some possibly helpful output:
# pacman -Qo $(which udevadm)
/usr/bin/udevadm is owned by systemd 212-1
# dmesg |tail -16
[26458.120628] usb 7-1.3: new high-speed USB device number 7 using ehci-pci
[26458.223059] usb-storage 7-1.3:1.0: USB Mass Storage device detected
[26458.223825] scsi10 : usb-storage 7-1.3:1.0
[26459.311607] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[26460.834081] sd 10:0:0:0: [sdd] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
[26460.834931] sd 10:0:0:0: [sdd] Write Protect is off
[26460.834935] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
[26460.835617] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.835621] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.839455] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.839460] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.860579] sdd: sdd1 sdd2
[26460.867111] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.867115] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.867118] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[26461.041982] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
# udevadm test /sys/bus/usb/devices/7-1.3
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'usb_id' /usr/lib/udev/rules.d/50-udev-default.rules:9
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:9
MODE 0664 /usr/lib/udev/rules.d/50-udev-default.rules:37
GROUP 1002 /usr/lib/udev/rules.d/51-android.rules:387
MODE 0660 /usr/lib/udev/rules.d/51-android.rules:387
RUN '/usr/share/virtualbox/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass} vboxusers' /usr/lib/udev/rules.d/60-vboxdrv.rules:6
PROGRAM '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' /usr/lib/udev/rules.d/69-libmtp.rules:1204
starting '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'(out) '0'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' [24644] exit with return code 0
IMPORT builtin 'path_id' /usr/lib/udev/rules.d/71-seat.rules:43
RUN 'uaccess' /usr/lib/udev/rules.d/73-seat-late.rules:15
handling device node '/dev/bus/usb/007/007', devnum=c189:774, mode=0660, uid=0, gid=1002
preserve permissions /dev/bus/usb/007/007, 020660, uid=0, gid=1002
preserve already existing symlink '/dev/char/189:774' to '../bus/usb/007/007'
ACTION=add
BUSNUM=007
DEVNAME=/dev/bus/usb/007/007
DEVNUM=007
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3
DEVTYPE=usb_device
DRIVER=usb
ID_BUS=usb
ID_DRIVE_THUMB=1
ID_FOR_SEAT=usb-pci-0000_00_1a_7-usb-0_1_3
ID_MODEL=DataTraveler_2.0
ID_MODEL_ENC=DataTraveler\x202.0
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_MODEL_ID=6545
ID_PATH=pci-0000:00:1a.7-usb-0:1.3
ID_PATH_TAG=pci-0000_00_1a_7-usb-0_1_3
ID_REVISION=0100
ID_SERIAL=Kingston_DataTraveler_2.0_1C6F654E4041ED601910053F
ID_SERIAL_SHORT=1C6F654E4041ED601910053F
ID_USB_INTERFACES=:080650:
ID_VENDOR=Kingston
ID_VENDOR_ENC=Kingston
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
ID_VENDOR_ID=0930
MAJOR=189
MINOR=774
PRODUCT=930/6545/100
SUBSYSTEM=usb
TAGS=:seat:uaccess:
TYPE=0/0/0
USEC_INITIALIZED=26452326568
adb_user=yes
run: '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 774 00 vboxusers'
run: 'uaccess'
unload module index
Unloaded link configuration context
# udevadm test /sys/bus/usb/devices/7-1.3:1.0
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:11
RUN 'kmod load $env{MODALIAS}' /usr/lib/udev/rules.d/80-drivers.rules:5
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3/7-1.3:1.0
DEVTYPE=usb_interface
DRIVER=usb-storage
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
INTERFACE=8/6/80
MODALIAS=usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00
PRODUCT=930/6545/100
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=452326811
run: 'kmod load usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00'
unload module index
Unloaded link configuration context
Last edited by bentglasstube (2014-04-03 20:51:36)I see. That is somewhat aggravating but I will find another way to achieve what I wanted I suppose.
Thank you. Should I mark this is solved or unsolvable or something? Sorry, I'm new to posting on these forums.
Edit: I was able to achieve what I wanted with udevil as recommended by the wiki.
Last edited by bentglasstube (2014-04-03 20:55:45) -
Configuring udev rules for Oracle 10g R2 Rac on OEL 5.5 U4 with Qnap
I'm trying to setup a 10g RAC Cluster following the guide by Jeff Hunter on http://www.idevelopment.info/
I have to admit, im no Linux admin, and have searched round the net for help with the following Issue.
I'm trying to set my iSCSI targets to have persistent mappings using udev rules
This is what I have done so far
[root@racnode1 Server]# iscsiadm -m discovery -t sendtargets -p nas-priv | grep 192.168.2.196
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d
-- Manually Log into iSCSI Targets
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 -l
-- Make iSCSI Targets Automatically Login
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
-- Create Persistent Local SCSI Device Names
- Identify Mappings
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l qnap | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdd
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sde
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdh
- Create Rules File
cat >> /etc/udev/rules.d/55-openiscsi.rules <<EOF
# /etc/udev/rules.d/55-openiscsi.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c/part%n"
EOF
- Create Shell Script
mkdir -p /etc/udev/scripts
vi /etc/udev/scripts/iscsidev.sh
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
chmod 755 /etc/udev/scripts/iscsidev.sh
service iscsi stop
service iscsi start
[root@racnode1 ~]# ls /dev/iscsi/*
ls: /dev/iscsi/*: No such file or directory
1.) For some reason I cannot get the mappings to work correctly, I have rebooted the server and tried a number of different changes in the rules script. But for the life of me I cannot get it work.
I noticed when I rebooted the server that it failed to execute the iscsidev. When I manually run the shell script with a parameter it produces output
Can anyone help me to get this up and running?
2.) My QNAP Nas doesnt seem to publish iSCSI targets to only one NIC. I think this is down to the firmware/feature not being available. When I discover targets I get the following
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l *qnap* | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdh
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdm
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdn
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sde
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdr
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdd
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdk
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdp
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdo
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sds
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdl
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdq
It shows the same targets on both NIC's, I only need them on the private ip 192.168.2.196
Edited by: user1728822 on 07-May-2011 15:53
Edited by: user1728822 on 07-May-2011 16:08Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar -
Udev rules file as an alternative to ASMLib
Grid Version: 11.2.0.3
OS: Oracle Enterprise Linux 6.3
I always wanted to avoid ASMLib. Now we are exploring the use of udev rules file to maintain
1. Ownership of shared LUNs
2. Permissions of shared LUNs.
But, as the below book suggests, udev only provides a way to maintain ownership and permission of LUNs (/dev entries)
How can I make sure that the device names, say /dev/xvda remains same across node reboots ? We have had Linux machines booting up with different /dev names in the past .
http://books.google.com.my/books?id=gbp5AAAAQBAJ&pg=PA144&lpg=PA144&dq=%22ASMLib+that+provides+an+alternative%22&source=bl&ots=6dcIeRfcU9&sig=V-xcAihZiS69LusLTBgEQpTJTOI&hl=en&sa=X&ei=U5ZNUofIBcHZrQeD7YGoCQ&redir_esc=y#v=onepage&q=%22ASMLib%20that%20provides%20an%20alternative%22&f=falseI set ownership of LUNs via the udev multipath rules file as described in Re: Can I use udev rules file for 11.2.0.3 RAC on Oracle Enterprise Linux 6 ?
I use multipath configuration to configure the LUNs as described in Re: Install Oracle 11gr2 2Node RAC on ASM -
Are /etc/udev/rules.d/86-hpmud* files obsolete?
For a while now, I keep getting the following errors during boot:
Sat Jan 21 14:25:13 2012: udevd[148]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/86-hpmud-hp_laserjet_professional_p1102w.rules:9
Sat Jan 21 14:25:13 2012: udevd[148]: invalid rule '/etc/udev/rules.d/86-hpmud-hp_laserjet_professional_p1102w.rules:9'
... (repeat for every 86-hpmud-* file in that folder)
I found an (ancient) bug report from 2009 with the subject "hplip: obsolete udev rules files are not removed on upgrades", so I assume they're obsolete, but I've only recently starting seeing this problem, which wouldn't jive with a 3-year old issue.
Can I safely delete these files, assuming that their contents has been replaced with entries in the /lib/udev/rules.d tree? I am not that well-versed in udev, unfortunately....OK - I backed them up and moved them out of /etc/udev/rules.d.
Confirming nothing broke is a bit of a problem right now. Printing is hit & miss from my laptop to my wireless HP P1102w printer at the best of times. I haven't figured out what the real issue is there, but since printing to other HPs works fine, I'll probably have to blame the printer or HPLIP. I wish HP would simplify their software and made simple drivers. I just need to print, I don't need all that hp-toolbox junk. I'll confirm this when I have a chance to print to a different HP printer.
Maybe you are looking for
-
Macbook pro i7 - Mid 2010 - Lion 10.7.2 fresh install CRASHES
Hello MacHeads like my self, I have a macbook pro - mid 2010 (i7, 8gb ram), I had a major disk corruption a few days ago (WD 750gb 7200rpm), bunch of bad sectors and I belive it took place becouse I had the crazy black screen failiur going on for a f
-
Eprint error creating account: Ajax submit failed: error = 403, Forbidden
I am trying to create an eprint account. but when I hit submit I get: Ajax submit failed: error = 403, Forbidden I am running from a mac with OSX 10.8. And a new HP Photosmart 6515. The browser is Safari version 6.0. I've tried different namse, scree
-
I have a video camera with a Firewire output, but my Pavilion 23 has no Firewire input jack. Do I need anything other than a Firewire to USB adapter to transfer video from the camera to the computer? Many thanks............
-
ITunes sort 'Album by artist/year' problems
I've been having problems sorting _some_ albums. I'll give you a specific example: I rip Simon and Garfunkel's 'The Concert in Central Park' which has 19 tracks. I want them to play in continuous mode, and in order. I show track number in the columns
-
Error when calling BAPI_MATERIAL_SAVEDATA
Hi all, I'm calling BAPI_MATERIAL_SAVEDATA through a RFC. I use SAP PI to call a function module and the function module calls the BAPI like this: call function 'BAPI_MATERIAL_SAVEDATA' exporting headdata = ls_headdata