UDEV touchpad not enabling after removing mouse
Hi and thanks for reading,
I have created udev rules
ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00cb", ENV{DISPLAY}=":0.0", ENV{XAUTHORITY}="/home/john/.Xauthority", ENV{ID_CLASS}="mouse", RUN+="/usr/bin/synclient TouchpadOff=1"
ACTION=="remove", SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00cb", ENV{DISPLAY}=":0.0", ENV{XAUTHORITY}="/home/john/.Xauthority", ENV{ID_CLASS}="mouse", RUN+="/usr/bin/synclient TouchpadOff=0"
Now it works as expected when I plug in the mouse the touchpad disables. However when uplugging the mouse the touchpad does not enable again. I cannot for the life of me figure out why?
Never mind, I have solved the problem. Searched "Synaptics" in My Computer. Opened up a folder labelled Synaptics. Selected InstNT. Right-Clicked; chose "run as administrator". Problem solved.
Similar Messages
-
Touchpad not working after suspend/resume on Asus R409LD
Hello,
I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
Here is the output of xinput before suspending :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB Camera id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
I tried deactivating and reactivating psmouse but it doesn't work.
Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
Here is a full dmseg with suspend/resume if it may help :
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
[ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
[ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
[ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
[ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
[ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
[ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
[ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
[ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
[ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
[ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
[ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
[ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
[ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
[ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
[ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
[ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
[ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
[ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
[ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
[ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
[ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
[ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
[ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
[ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
[ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
[ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
[ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
[ 0.000000] On node 0 totalpages: 1542928
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12838 pages used for memmap
[ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.353 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150204
[ 0.034560] ACPI: All ACPI Tables successfully acquired
[ 0.036629] Security Framework initialized
[ 0.036636] Yama: becoming mindful.
[ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040670] Initializing cgroup subsys blkio
[ 0.040674] Initializing cgroup subsys memory
[ 0.040681] Initializing cgroup subsys devices
[ 0.040684] Initializing cgroup subsys freezer
[ 0.040686] Initializing cgroup subsys net_cls
[ 0.040715] CPU: Physical Processor ID: 0
[ 0.040716] CPU: Processor Core ID: 0
[ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041941] mce: CPU supports 7 MCE banks
[ 0.041957] CPU0: Thermal monitoring enabled (TM1)
[ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
[ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.044495] ftrace: allocating 21346 entries in 84 pages
[ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089782] TSC deadline timer enabled
[ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.089843] ... version: 3
[ 0.089844] ... bit width: 48
[ 0.089845] ... generic registers: 4
[ 0.089847] ... value mask: 0000ffffffffffff
[ 0.089848] ... max period: 0000ffffffffffff
[ 0.089849] ... fixed-purpose events: 3
[ 0.089850] ... event mask: 000000070000000f
[ 0.109937] x86: Booting SMP configuration:
[ 0.109940] .... node #0, CPUs: #1
[ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129984] #2 #3
[ 0.165939] x86: Booted up 1 node, 4 CPUs
[ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
[ 0.170937] devtmpfs: initialized
[ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
[ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
[ 0.174282] pinctrl core: initialized pinctrl subsystem
[ 0.174328] RTC time: 14:49:34, date: 03/14/15
[ 0.174468] NET: Registered protocol family 16
[ 0.187440] cpuidle: using governor ladder
[ 0.200788] cpuidle: using governor menu
[ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200841] ACPI: bus type PCI registered
[ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201048] PCI: Using configuration type 1 for base access
[ 0.214532] ACPI: Added _OSI(Module Device)
[ 0.214535] ACPI: Added _OSI(Processor Device)
[ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
[ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234176] ACPI: Dynamic OEM Table Load:
[ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.235459] ACPI: Dynamic OEM Table Load:
[ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.236797] ACPI: Dynamic OEM Table Load:
[ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.238841] ACPI: Interpreter enabled
[ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.238892] ACPI: (supports S0 S3 S4 S5)
[ 0.238894] ACPI: Using IOAPIC for interrupt routing
[ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240682] ACPI: Power Resource [PC05] (on)
[ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.258130] PCI host bridge to bus 0000:00
[ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.260996] acpiphp: Slot [1] registered
[ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
[ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.271464] pci 0000:03:00.1: supports D1
[ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286764] vgaarb: loaded
[ 0.286765] vgaarb: bridge control possible 0000:00:02.0
[ 0.286917] PCI: Using ACPI for IRQ routing
[ 0.288384] PCI: pci_cache_line_size set to 64 bytes
[ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
[ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
[ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
[ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
[ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
[ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.288579] NetLabel: Initializing
[ 0.288580] NetLabel: domain hash size = 128
[ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288596] NetLabel: unlabeled traffic allowed by default
[ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.290662] Switched to clocksource hpet
[ 0.296419] pnp: PnP ACPI init
[ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.296848] system 00:01: [io 0xffff] has been reserved
[ 0.296850] system 00:01: [io 0xffff] has been reserved
[ 0.296852] system 00:01: [io 0xffff] has been reserved
[ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
[ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.298320] pnp: PnP ACPI: found 10 devices
[ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
[ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305092] NET: Registered protocol family 2
[ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305671] TCP: reno registered
[ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305779] NET: Registered protocol family 1
[ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.306077] PCI: CLS 64 bytes, default 64
[ 0.306126] Unpacking initramfs...
[ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
[ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
[ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389343] Scanning for low memory corruption every 60 seconds
[ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389637] Initialise system trusted keyring
[ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391638] zpool: loaded
[ 0.391641] zbud: loaded
[ 0.391847] VFS: Disk quotas dquot_6.5.2
[ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392076] Key type big_key registered
[ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392313] io scheduler noop registered
[ 0.392316] io scheduler deadline registered
[ 0.392350] io scheduler cfq registered (default)
[ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393205] efifb: probing for efifb
[ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
[ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.393229] efifb: scrolling: redraw
[ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396869] Console: switching to colour frame buffer device 170x48
[ 0.400357] fb0: EFI VGA frame buffer device
[ 0.400367] intel_idle: MWAIT substates: 0x11142120
[ 0.400369] intel_idle: v0.4 model 0x45
[ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.400674] GHES: HEST is not enabled!
[ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.401281] Linux agpgart interface v0.103
[ 0.401345] rtc_cmos 00:02: RTC can wake from S4
[ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401526] Intel P-state driver initializing.
[ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402207] TCP: cubic registered
[ 0.402436] NET: Registered protocol family 10
[ 0.402861] NET: Registered protocol family 17
[ 0.403549] Loading compiled-in X.509 certificates
[ 0.403578] registered taskstats version 1
[ 0.404855] Magic number: 7:305:839
[ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
[ 0.405254] PM: Hibernation image not present or could not be loaded.
[ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
[ 0.405869] Write protecting the kernel read-only data: 8192k
[ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
[ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.428621] sdhci: Secure Digital Host Controller Interface driver
[ 0.428624] sdhci: Copyright(c) Pierre Ossman
[ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438789] ACPI: bus type USB registered
[ 0.438822] usbcore: registered new interface driver usbfs
[ 0.438836] usbcore: registered new interface driver hub
[ 0.438866] usbcore: registered new device driver usb
[ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439732] ehci-pci: EHCI PCI platform driver
[ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
[ 0.440689] SCSI subsystem initialized
[ 0.441807] libata version 3.00 loaded.
[ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.457612] hub 1-0:1.0: USB hub found
[ 0.457623] hub 1-0:1.0: 2 ports detected
[ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
[ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.458152] hub 2-0:1.0: USB hub found
[ 0.458161] hub 2-0:1.0: 9 ports detected
[ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460507] hub 3-0:1.0: USB hub found
[ 0.460513] hub 3-0:1.0: 4 ports detected
[ 0.461400] ahci 0000:00:1f.2: version 3.0
[ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.474875] scsi host0: ahci
[ 0.475020] scsi host1: ahci
[ 0.475159] scsi host2: ahci
[ 0.475279] scsi host3: ahci
[ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
[ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
[ 0.475339] ata3: DUMMY
[ 0.475340] ata4: DUMMY
[ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
[ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 0.797611] ata1.00: configured for UDMA/133
[ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
[ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 0.888974] hub 1-1:1.0: USB hub found
[ 0.889039] hub 1-1:1.0: 8 ports detected
[ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
[ 1.126383] ata2.00: configured for UDMA/100
[ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
[ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.149453] sda: sda1 sda2 sda3
[ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.333146] systemd[1]: Detected architecture 'x86-64'.
[ 1.333579] systemd[1]: Set hostname to <hal>.
[ 1.390731] systemd[1]: Starting Login Prompts.
[ 1.390866] systemd[1]: Reached target Login Prompts.
[ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391068] systemd[1]: Expecting device dev-sda1.device...
[ 1.391131] systemd[1]: Starting Swap.
[ 1.391189] systemd[1]: Reached target Swap.
[ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391251] systemd[1]: Starting Root Slice.
[ 1.391516] systemd[1]: Created slice Root Slice.
[ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.391676] systemd[1]: Starting Journal Socket.
[ 1.391774] systemd[1]: Listening on Journal Socket.
[ 1.391804] systemd[1]: Starting User and Session Slice.
[ 1.391891] systemd[1]: Created slice User and Session Slice.
[ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.404539] systemd[1]: Listening on Journal Audit Socket.
[ 1.404567] systemd[1]: Starting System Slice.
[ 1.404753] systemd[1]: Created slice System Slice.
[ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.405256] systemd[1]: Mounting Debug File System...
[ 1.405704] systemd[1]: Starting Setup Virtual Console...
[ 1.406206] systemd[1]: Starting Journal Service...
[ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.407431] systemd[1]: Starting system-getty.slice.
[ 1.407583] systemd[1]: Created slice system-getty.slice.
[ 1.407652] systemd[1]: Mounting Huge Pages File System...
[ 1.408243] systemd[1]: Started File System Check on Root Device.
[ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.408802] systemd[1]: Starting Encrypted Volumes.
[ 1.408843] systemd[1]: Reached target Encrypted Volumes.
[ 1.408860] systemd[1]: Starting udev Control Socket.
[ 1.408920] systemd[1]: Listening on udev Control Socket.
[ 1.409625] systemd[1]: Mounting Temporary Directory...
[ 1.410189] systemd[1]: Starting udev Kernel Socket.
[ 1.410267] systemd[1]: Listening on udev Kernel Socket.
[ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.411636] systemd[1]: Started Load Kernel Modules.
[ 1.411663] systemd[1]: Mounted FUSE Control File System.
[ 1.411711] systemd[1]: Mounting Configuration File System...
[ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.412517] systemd[1]: Starting Remote File Systems.
[ 1.412594] systemd[1]: Reached target Remote File Systems.
[ 1.412633] systemd[1]: Starting Apply Kernel Variables...
[ 1.413108] systemd[1]: Expecting device dev-sda3.device...
[ 1.413180] systemd[1]: Starting Slices.
[ 1.413242] systemd[1]: Reached target Slices.
[ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.413348] systemd[1]: Starting Paths.
[ 1.413415] systemd[1]: Reached target Paths.
[ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.415449] systemd[1]: Started Setup Virtual Console.
[ 1.417502] systemd[1]: Mounted Configuration File System.
[ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.420243] systemd[1]: Mounted Debug File System.
[ 1.420980] systemd[1]: Mounted Huge Pages File System.
[ 1.421670] systemd[1]: Mounted Temporary Directory.
[ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.431714] systemd[1]: Started Apply Kernel Variables.
[ 1.432536] systemd[1]: Started udev Coldplug all Devices.
[ 1.437198] systemd[1]: Starting Load/Save Random Seed...
[ 1.438791] systemd[1]: Started Rebuild Hardware Database.
[ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.438844] systemd[1]: Started First Boot Wizard.
[ 1.438860] systemd[1]: Started Create System Users.
[ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.443195] systemd[1]: Started Load/Save Random Seed.
[ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
[ 1.461282] systemd[1]: Starting Local File Systems (Pre).
[ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
[ 1.531924] systemd[1]: Started udev Kernel Device Manager.
[ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.561234] ACPI: Lid Switch [LID]
[ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.561324] ACPI: Sleep Button [SLPB]
[ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.561396] ACPI: Power Button [PWRF]
[ 1.580408] ACPI: AC Adapter [AC0] (on-line)
[ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.610817] [drm] Initialized drm 1.1.0 20060810
[ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
[ 1.647475] wmi: Mapper loaded
[ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.677433] sound hdaudioC1D0: inputs:
[ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
[ 1.677439] sound hdaudioC1D0: Mic=0x19
[ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
[ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
[ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
[ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
[ 1.681093] [drm] Memory usable by graphics device = 2048M
[ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 1.681099] fb: switching to inteldrmfb from EFI VGA
[ 1.681124] Console: switching to colour dummy device 80x25
[ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.681232] [drm] Replacing VGA console driver
[ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
[ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701878] [drm] Driver supports precise vblank timestamp query.
[ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
[ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
[ 1.710484] systemd[1]: Mounting /boot...
[ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
[ 1.717424] iTCO_vendor_support: vendor-support=0
[ 1.717576] AVX2 version of gcm_enc/dec engaged.
[ 1.717578] AES CTR mode by8 optimization enabled
[ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
[ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.718376] media: Linux media interface: v0.10
[ 1.727078] systemd[1]: Starting Sound Card.
[ 1.727130] systemd[1]: Reached target Sound Card.
[ 1.729262] asus_wmi: ASUS WMI generic driver loaded
[ 1.729427] Linux video capture interface: v2.00
[ 1.730834] asus_wmi: Initialization: 0x1
[ 1.730877] asus_wmi: BIOS WMI version: 7.9
[ 1.730930] asus_wmi: SFUN value: 0x4a0877
[ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 1.748309] fbcon: inteldrmfb (fb0) is primary device
[ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
[ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 1.798396] intel_rapl: Found RAPL domain package
[ 1.798398] intel_rapl: Found RAPL domain core
[Still no ideas ?
-
MSI GS70 20D Touchpad not working after login when I upgraded to 8.1
Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas. -
Keyboard and touchpad not working after Windows 10 update
after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine
It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599
-
Commit operation not enabled after createinsert in detail table
Hi Everybody,
After clicking createinsert operation for detail table in master detail, i got unique contraint error from db.after rectifiying the data for newly created row..commit operation not enabled to save the data.
Please find the code i used in my jsf.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:panelBox text="PanelBox2" id="pb2">
<f:facet name="toolbar">
<af:group id="g2">
<af:commandButton actionListener="#{bindings.Delete1.execute}"
text="Delete1"
disabled="#{!bindings.Delete1.enabled}"
id="cb4"/>
<af:commandButton
text="CreateInsert1"
disabled="#{!bindings.CreateInsert1.enabled}"
id="cb3"
action="#{backingBeanScope.MyIndustryBean.cb3_action}"/>
<af:commandButton actionListener="#{bindings.Commit.execute}"
text="Commit"
disabled="#{!bindings.Commit.enabled}"
id="cb5"/>
<af:commandButton actionListener="#{bindings.Rollback.execute}"
text="Rollback"
disabled="#{!bindings.Rollback.enabled}"
immediate="true" id="cb6">
<af:resetActionListener/>
</af:commandButton>
</af:group>
</f:facet>
<af:table value="#{bindings.IndustryEOView1.collectionModel}"
var="row" rows="#{bindings.IndustryEOView1.rangeSize}"
emptyText="#{bindings.IndustryEOView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.IndustryEOView1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.IndustryEOView1Query.queryDescriptor}"
queryListener="#{bindings.IndustryEOView1Query.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.IndustryEOView1.collectionModel.selectedRow}"
selectionListener="#{bindings.IndustryEOView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1" width="448"
inlineStyle="height:193px;" partialTriggers="::cb3 ::cb4">
<af:column sortProperty="IdDesc" filterable="true" sortable="true"
headerText="#{bindings.IndustryEOView1.hints.IdDesc.label}"
id="c2">
<af:inputText value="#{row.bindings.IdDesc.inputValue}"
label="#{bindings.IndustryEOView1.hints.IdDesc.label}"
required="#{bindings.IndustryEOView1.hints.IdDesc.mandatory}"
columns="#{bindings.IndustryEOView1.hints.IdDesc.displayWidth}"
maximumLength="#{bindings.IndustryEOView1.hints.IdDesc.precision}"
shortDesc="#{bindings.IndustryEOView1.hints.IdDesc.tooltip}"
id="it2">
<f:validator binding="#{row.bindings.IdDesc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="IdPlace" filterable="true" sortable="true"
headerText="#{bindings.IndustryEOView1.hints.IdPlace.label}"
id="c1">
<af:inputText value="#{row.bindings.IdPlace.inputValue}"
label="#{bindings.IndustryEOView1.hints.IdPlace.label}"
required="#{bindings.IndustryEOView1.hints.IdPlace.mandatory}"
columns="#{bindings.IndustryEOView1.hints.IdPlace.displayWidth}"
maximumLength="#{bindings.IndustryEOView1.hints.IdPlace.precision}"
shortDesc="#{bindings.IndustryEOView1.hints.IdPlace.tooltip}"
id="it1">
<f:validator binding="#{row.bindings.IdPlace.validator}"/>
</af:inputText>
</af:column>
</af:table>
</af:panelBox>
<af:panelBox text="PanelBox1" id="pb1">
<f:facet name="toolbar">
<af:group id="g1">
<af:commandButton actionListener="#{bindings.Delete.execute}"
text="Delete"
disabled="#{!bindings.Delete.enabled}"
id="cb2"/>
<af:commandButton
text="CreateInsert"
disabled="#{!bindings.CreateInsert.enabled}"
id="cb1"
action="#{backingBeanScope.MyIndustryBean.cb1_action}"/>
<af:commandButton actionListener="#{bindings.Create.execute}"
text="Create"
disabled="#{!bindings.Create.enabled}"
id="cb7"/>
</af:group>
</f:facet>
<af:table value="#{bindings.IndustryRatinEOView1.collectionModel}"
var="row" rows="#{bindings.IndustryRatinEOView1.rangeSize}"
emptyText="#{bindings.IndustryRatinEOView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.IndustryRatinEOView1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.IndustryRatinEOView1Query.queryDescriptor}"
queryListener="#{bindings.IndustryRatinEOView1Query.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.IndustryRatinEOView1.collectionModel.selectedRow}"
selectionListener="#{bindings.IndustryRatinEOView1.collectionModel.makeCurrent}"
rowSelection="single" id="t2"
partialTriggers="::t1 ::cb1 ::cb2 ::cb7">
<af:column sortProperty="RatingId" filterable="true" sortable="true"
headerText="#{bindings.IndustryRatinEOView1.hints.RatingId.label}"
id="c5">
<af:selectOneChoice value="#{row.bindings.RatingId.inputValue}"
label="#{row.bindings.RatingId.label}"
required="#{bindings.IndustryRatinEOView1.hints.RatingId.mandatory}"
shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingId.tooltip}"
id="soc2" autoSubmit="true">
<f:selectItems value="#{row.bindings.RatingId.items}" id="si2"/>
</af:selectOneChoice>
</af:column>
<af:column sortProperty="RatingSubId" filterable="true"
sortable="true"
headerText="#{bindings.IndustryRatinEOView1.hints.RatingSubId.label}"
id="c6" partialTriggers="soc2">
<af:selectOneChoice value="#{row.bindings.RatingSubId.inputValue}"
label="#{row.bindings.RatingSubId.label}"
required="#{bindings.IndustryRatinEOView1.hints.RatingSubId.mandatory}"
shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingSubId.tooltip}"
id="soc1" partialTriggers="soc2">
<f:selectItems value="#{row.bindings.RatingSubId.items}"
id="si1"/>
</af:selectOneChoice>
</af:column>
<af:column sortProperty="Place" filterable="true" sortable="true"
headerText="#{bindings.IndustryRatinEOView1.hints.Place.label}"
id="c4">
<af:inputText value="#{row.bindings.Place.inputValue}"
label="#{bindings.IndustryRatinEOView1.hints.Place.label}"
required="#{bindings.IndustryRatinEOView1.hints.Place.mandatory}"
columns="#{bindings.IndustryRatinEOView1.hints.Place.displayWidth}"
maximumLength="#{bindings.IndustryRatinEOView1.hints.Place.precision}"
shortDesc="#{bindings.IndustryRatinEOView1.hints.Place.tooltip}"
id="it3">
<f:validator binding="#{row.bindings.Place.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="RatingDesc" filterable="true"
sortable="true"
headerText="#{bindings.IndustryRatinEOView1.hints.RatingDesc.label}"
id="c3">
<af:inputText value="#{row.bindings.RatingDesc.inputValue}"
label="#{bindings.IndustryRatinEOView1.hints.RatingDesc.label}"
required="#{bindings.IndustryRatinEOView1.hints.RatingDesc.mandatory}"
columns="#{bindings.IndustryRatinEOView1.hints.RatingDesc.displayWidth}"
maximumLength="#{bindings.IndustryRatinEOView1.hints.RatingDesc.precision}"
shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingDesc.tooltip}"
id="it4">
<f:validator binding="#{row.bindings.RatingDesc.validator}"/>
</af:inputText>
</af:column>
</af:table>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>Hi,
Need to set partialSubmit true for CreateInsert and partialTrigger attribute for Commit button(Select Createinsert button for partialTrigger ) -
CMS Track configuration does not save after removal of runtime
Hello,
We are having problem to save CMS track configuration after removing a runtime which was taken away from us and is not recoverable. The CMS track config was not updated prior to this and we can no longer make track adjustments due to the old DEV runtime sys not being available. Does anyone have similar issue and know how to fix it?
Thanks!For this SP5 track, we have not imported SP9 required SCs (SAPJEE, SAPJTECHS, SAPBUILDT, EP_BUILDT). but we did imported them (SP8 version) with patches. We imported most current SP9 patches to the new SP6 track. We want to move our development on the SP5 track to assemble it, then imported to the new SP6 track based SAP XSS cookbook.
We are not able to assemble released activities with broken DCs on the SP5 track. I look a DC for ess/au/fam/cfg, Build.log still shows xlf conversion error:
Ant runtime 4.295 seconds
Ant build finished with ERRORS
The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Error: Build stopped due to an error: The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Build plugin finished at 2006-12-13 19:30:41 GMT-05:00 (EST)
Total build plugin runtime: 6.794 seconds
Build finished with ERROR
Not sure if you can force it assembled even with this broken DCs as we have not touched this xlf.
Please let me know if you find something similar to us from other customers.
Thans! -
Laptop do not boot after remove RTC battery !!!
After remove RTC battery for clear the power-on password.
my laptop is power on and fan is working but dont boot. just black screen.
helppppppppPolarity is really not an issue since there is a connector from the batery to the systemboard. It is either plugged in or not since there is a keyway at the header on the systemboard.
The following is an image of how the connection looks. ref: the service and maintenence guide
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Message states that Camera Raw is not enabled after transferring data to a new MacbookPro
Using photoshop and Bridge CS6.
When I attempt to open a photo in Camera raw I receive this message Camera Raw is not enabled.
"Camera raw requires that a qualifying product has been launched at least once to enable this feature.had to wipe and reload
-
How to make text STAY up after removing mouse from button?
Hello!
I honestly hope that this thread title makes sense. Allow me to explain my predicament.
Someone has created a map where there are little colored buttons over building locations. The buttons were made so that when you hover your cursor over them, they will bring up a little chat bubble (like the ones you see in comics) with the appropriate street address text. What I cannot figure out is how to, after removing the cursor from over a button, make the text bubble stay put so that those who see the map can highlight then copy and paste the street address from it.
Is there any advice?It kinda depends on what version of actionscript you're using, but one that may work for AS2 and AS3 is to use setTimeout to call a function that does what your rollout code currently does... meaning in your rollout function you use: setTimeout(callFunction, x-seconds)... where callFunction is a function that contains what your rollout function did originally.
-
Magic Mouse not working after USB mouse installed
Hello,
I have been using my Magic Mouse for years then last week I inserted a USB mouse. Once I'd finished using the USB mouse I removed it and tried to use the Magic Mouse but it simply didn't work. Now - this is the odd bit. The mouse is connected and shows the batteries at 100% and the cursur moves around the screen, however, when I click (left or right) nothing happens. Oddly enough, the two finger swipe works fine.
Any ideas???Hello DeeDub1978,
I'm having a little trouble working out which mouse does or doesn't do what, so can we start again. It is possible there is no link between the faults on the two mice.
1. First, to check your USB mouse. Does it have a nice healthy light when it is plugged in? And is there a cursor showing on the screen? And the roller ball in the centre of the mouse ... does that look clean or slightly off colour?
2. Then the Magic Mouse. Although the batteries show 100%, is there a constant green light below ... or does it flicker. With these mice there have been several reports of problems after the Yosemite upgrade and not having Yosemite I have no way of checking things out. So if I say to you, on lower level OSs, an SMC reset would be an early move, I am not sure if it has the same effect with your OS. If it can be done, do it. I have to assume you have checked the settings and the pairing.
Clearly we need to get at least one mouse working and I think the USB one should be the main target.
Please answer in two separate sections in the way I have set out my questions.
Thank you for the star; I do hope I can improve and help repair at least one of them. -
HP Pavilion 15-p076 - Touchpad not working after yesterdays driver update
I let HP software update my computer and at first everything worked just fine. After overnight, when I boot up, there is no mouse, touchpad is not working!
I re-install drivers and touchpad is working. I boot few times, and it still works. Next day, it doesn't work anymore.
Now I have installed the drivers three times, twice today.
So is my month old laptop dead already?Hi there @Ardevealca
Welcome to the HP Support Forums!
From the sound of things one of the updates being automatically pushed to your notebook is the source of the problem, either in combination with one of the others or with a security update. This sort of thing sometimes happens, thanks to all the possible combinations of hardware and software.
It is not likely that there is a problem with your notebook.
I would disable the automatic updates and see if the problem recurs. That way you would have more control of what updates are applied.
Turn automatic updating on or off
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Voicemail not working - after removing and adding Dialplan
Exchange 2013
Lync 2013
I had a UM dial plan configured and it was working properly. I removed that plan and added a new one. The new one does not work.
When ever you leave a Voice-mail for a user, they never get it. If the user logs in, they still have access to old voice-mails that were left before the UM dial plan was deleted and a new one created.
My assumption is that when you activate the user for UM, it is attaching back to the existing information, instead of using the new dial plan. Anyone have any thoughts on how to stop this?
Is there a way I can just purge all UM information and start over?
Thanks,
RoganI did, as far as I can tell the new dial plan is working.
Currently, only I am enabled for UM in the environment. If you call my extension, you are able to leave a VM. I never get a missed call notification or the Voicemail. If I manually log into my Voicemail, I have no new voicemail and only
old ones that were left before this new UM plan was created.
I did remove UM from my account and re-add it with the new one, that did not solve the problem.
Where are the VM that are being left now going, if not into my mailbox.
Does deleting a UM remove any associated voicemails? Should it?
Do you know if there is a way for me to reset my mailbox, to fully remove the UM capabilities and then start over? -
OIM 11g - User Not enabled After the job "enable user after start date"
Hi,
I have a future hired user in OIM whose start date is set in OIM. The status of the user in OIM is 'Disabled Until Start Date'.
After the start date has passed and the scheduled job 'enable user after start date' is run, I see that the user is still in the status 'Disabled Until Start Date'. I re-run the scheduled job 'enable user after start date', this time manually, still the state of the user remains unchanged.
Please help in troubleshooting as to find out the root cause of the issue and a workaround/solution, if possible.
This issue is intermittent and has happened with quite a number of user. Any pointer would be helpful.
Regards,
Sudipto S.I agree with Nayan.
One alternative approach can be to write your own custom scheduler which can overcome the limitation of OOTB scheduled job 'enable user after start date'. Let the OOTB job get executed first. After it, your custom scheduler should fire a simple SQL Query:
SELECT USR_KEY, USR_STATUS FROM USR WHERE (USR_START_DATE > SYSDATE -1) AND USR_STATUS='Disabled Until Start Date';
//Means those users who are supposed to get enabled today and are still not yet enabled and are in 'Disabled Until Start Date'. May be 2-3 user keys at max will come...
As you said it happens only intermittently and not for all users... So, let the OOTB scheduled job take care of most of such users... And after it has finished, if any user still remains in 'Disabled Until Start Date', your custom scheduler should enable it via using tcUserOperationsIntf.enableUser(userKey);
Using API is always better than database update... Because APIs trigger downstream provisioning workflows as well and not just updates OIM Database...
Keeping your constraints in mind, I think it is the correct answer. -
Storage migration not possible after removing shared vhdx
I have two VM:s in VMM that I use for tests. Just completed a test of shared storage and removed the shared disks from WSFC in the cluster and then after shutting down the nodes I removed the disks from the VM:s using powershell. Now when I try to storage
migrate the VM:s (that no longer have any shared storage, HasSharedStorage = false) it says "The specified path is not a valid folder path on <host>". VMM 2012 R2 UR5. Other VM's migrate fine - just the two that had shared storage that
doesn'tThat's true in general and maybe that's the problem here. It's not like there is a load of information about how to manage VMs with shared disks. For removing the shared disks I shut down the VM:s and used Hyper-V manager to remove the disks. I then refreshed
the VM: in VMM and it picked up the change without complaining.
In complete lack of procedures of how to do this, and other important stuff as how you perform configuration changes in VMM on VM:s with shared disks I think all that can be said is that there are no procedures. If you google how to reconfigure such a VM
in VMM you'll find that ONE way is to perform a change in VMM, choose the Script button and then remove all the options except the supported ones from the script and the run it in the VMM console. This is what I usually do.
Maybe if I hadn't had this problem if I used Remove-SCVirtualHardDisk instead. I'm far from sure but it's a possibility
This is just a test setup so I'm not going to spend time on researching it. However it's a good example of how immature shared VHDx is and for anyone considering it I can only recommend them to seek other options if at all possible. We have several virtual
clusters using shared VHDx and it's not pretty. It violates most of the stuff that is great with virtualization and ties the fabric to the resources. Not beeing able to storage migrate a disk is just not practically acceptable.
This is a bug of some sorts - be it functionality or lacking documentation -
Touchpad not detected after Xorg update
cat /proc/bus/input/devices:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=800000000000 0 0 500f02102002 380307cf810d001 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=4000 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.2/input0
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.3/input0
S: Sysfs=/class/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=05a9 Product=2640 Version=0100
N: Name="Laptop Integrated Webcam"
P: Phys=usb-0000:00:1d.7-6
S: Sysfs=/class/input/input11
U: Uniq=
H: Handlers=event11
B: EV=3
B: KEY=1 0 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input12
U: Uniq=
H: Handlers=mouse2 event12
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3mcmillan wrote:Probably related to the xorg upgrade with hotplugging
http://wiki.archlinux.org/index.php/Xor … otplugging
If you haven't already searched the forums there seem to be a few threads going already where people are dealing with issues with this upgrade
I searched and got my keyboard and touchpad set up to work with hotplugging. Keyboard worked, touchpad did not. Any configuration changes I made dont get reconginzed. I dont know what the deal is unfortunately
Maybe you are looking for
-
I don't know why my code isn't working, Can you see what is wrong?
I'm putting together a program that reads input from a text file and then decides what type of input it is (male or female) and then calculates the final sum for both. m=male and f=female. The numbers after the letter are GPAs. Here is the input file
-
1099 amount for partial payments
I have a scenario where one invoice can have multiple line items and only one of the line items is subject to withhold tax. For ex: one invoice is making payment for rent, and other services. But, only rent should be able to print on 1099.. I have tr
-
Aged Tickets oolder than 30 days
I am using Crystal XI. I am trying to find the best way to report on service requests that have a date entered that has aged 30 days and over from the date the report is run and only report on the technicians and how many tickets are aged over. I was
-
Hi, First time post here so be gentle :) I am trying to stream FLV files from Captivate (2.0) hosted on Akamai. with little success. According to the Akamai Flash documentation, their streaming service is not compatible with MediaController/MediaDisp
-
I am upgrading very soon from CF5 to CF9. Why so long to upgrade? Government agency, never any money, bla, bla, bla... One of my big concerns is if I'll be able to install and use the custom tag <CF_HTML2PDF3>. I manage a huge intranet site and have