Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Similar Messages

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Plan values not being displayed in the report ..

Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
Sruthi

Sruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR.

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Run data not being displayed in the data view tab following a run

Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab. I am now having to drag it over from the project documentation tab. I am sure there is a quick fix. What is it? Also, how can I password protect to prevent this type of issue in the future?

Benbrax wrote:
Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab. I am now having to drag it over from the project documentation tab. I am sure there is a quick fix. What is it? Also, how can I password protect to prevent this type of issue in the future?
So they changed something? You don't have a backup of the software, nor any kind of software control? Where I work, you can't even run modified code on a production unit, else you just created an expensive "engineering unit." Could be they deleted just one data wire and it may take you hours to find it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Where clause is not being passed to the report

I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

Excelicon is not being displayed in the alv output

Hi,
iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

OSS# 1140542?
or you may search other.
Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

SSRS tablix not be visible when no data is selected to display on the report

In an SSRS 2008 r2 existing dashboard application, I display a tablix (as a header) based upon the following selection criteria:
=iif(Len(First(Fields!CustomerNumber.Value, "Main")) = 0, true, false).
The CustomerNumber value is passed between the various SSRS reports in the dashboard application. There are times when the Fields!CustomerNumber.Value is selected for a particular report and there is no detail data to display. What happens with the existing
reports, is the space that would be allocated for the tablix is shown.
When there is no data to display, there is a NoRowsmessage that can be displayed on the report.
Basically when there are no detail records to display on the report, I would like the tablix report header not to display when there is no detail data for the report.
Thus can you tell me how to code the tablix report header not to display when there is no detail data?

Sorry, I overlooked Katherine's simple solution, partly because the header doesn't go away, it is just replaced with something that cannot be differentiated from the report background. Keep in mind that the space the tablix is in is still occupied by the
tablix as you can see below:
Sample report with no data and an empty rows message of " ".
Above is the same report without a no rows message but with the header row hidden using thisformula: =IIf(Count(1)>0, false, true). You can see that the space that the header normally occupies is collapsed away when hiding the header whereas the spaces
(" ") occupy that space when using the no rows message.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Data is not being displayed into DataGridview until Clicked inside the cells

Hi,
On a windows form, I have a DataGridView, its columns are auto-generated every time. Data is loaded after the user click a data-load button. However this is NOT working well, the data is not displayed until manually clicked inside the grid cells. The following
is the code. Could you please help? Thanks!
private void ButtonTestGrid_Click(object sender, EventArgs e)
            for (int i = 0; i < 10; i++)
                this.MainDataGrid.Columns.Add(TestHelper.CreateTextBoxColumn("Col" + i.ToString(), 120));
            Dictionary<string, object>[] data;
            data = TestHelper.CreateTestData();
            this.MainDataGrid.EndEdit();
            TestHelper.LoadGridData(this.MainDataGrid, data);
            this.MainDataGrid.Refresh();
public class TestHelper
        public static DataGridViewTextBoxColumn CreateTextBoxColumn(string name, int width)
            DataGridViewTextBoxColumn column = new DataGridViewTextBoxColumn();
            column.HeaderText = name;
            column.Name = name;
            column.ReadOnly = false;
            column.Width = width;
            return column;
        public static void LoadGridData(System.Windows.Forms.DataGridView grid, Dictionary<string, object>[] data)
            int index;
            foreach (Dictionary<string, object> row in data)
                index = grid.Rows.Add();
                LoadRowData(grid, index, row);
        public static void LoadRowData(System.Windows.Forms.DataGridView grid, int index, Dictionary<string, object> data)
            string name;
            for (int i = 0; i < grid.Columns.Count; i++)
                name = grid.Columns[i].Name;
                if (data.ContainsKey(name))
                    grid.Rows[index].Cells[name].Value = data[name];
        public static Dictionary<string, object>[] CreateTestData()
            Dictionary<string, object>[] dataList = new Dictionary<string, object>[5];
            Dictionary<string, object> data;
            for (int j = 0; j < 5; j++)
                data = new Dictionary<string, object>();
                for (int i = 0; i < 10; i++)
                    data.Add("Col" + i.ToString(), i);
                dataList[j] = data;
            return dataList;

There are different ways to bind the datagridview control to it's datasource, the question is where and what is your datasource? Is it from a database or XML file, or is it built on runtime...etc?
Based on your explanation I can understand that the Datagridview is binding correctly in the code behind since the rows of the grid are created. Because the row of the Datagridview are created only while it is binded correctly to it's datasource. The issue
of the display seems something different and strange.
Try also this way by using DataTable one the common ways used:
static DataTable GetTable()
// Here we create a DataTable with four columns.
DataTable table = new DataTable();
table.Columns.Add("Dosage", typeof(int));
table.Columns.Add("Drug", typeof(string));
table.Columns.Add("Patient", typeof(string));
table.Columns.Add("Date", typeof(DateTime));
// Here we add five DataRows.
table.Rows.Add(25, "Indocin", "David", DateTime.Now);
table.Rows.Add(50, "Enebrel", "Sam", DateTime.Now);
table.Rows.Add(10, "Hydralazine", "Christoff", DateTime.Now);
table.Rows.Add(21, "Combivent", "Janet", DateTime.Now);
table.Rows.Add(100, "Dilantin", "Melanie", DateTime.Now);
return table;
Then to bind the above Datatable to the grid control:
this.MainGrid.DataSource = null;//To clear before bind
this.MainGrid.DataSource = GetTable();
Fouad Roumieh

The expression is not being displayed in the alert inbox

Hi,
I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
I appreciate your early response.
Regards
Ganesh

Hi Venkat,
Without using BPM, you can think/try out with triggering an alert from UDF:
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
Also check out this Michal's blog on ALERT Configuration..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this wull help.
Nilesh

Udf Data is not being displayed in the report

Similar Messages

Maybe you are looking for