UDF help -break statement

Hi all,
I have a problem with my UDF. A break statement doesnt break out of the for loop. Please go thru the follwing and offer your helping hand.
The Issue:
In need to check the value of a "child" element for each occurrence of the parent node and if the condition is true then map the value of "1" to the target element with the same name and a same parent.
Source Structure:
ParentNode1 <1..1>
...Child Node1 <1.unbounded>
.... Flag_Source <1.1>
 Target Structure
ParentNode1 <1..1>
....Child Node <1. unbounded>
Flag_Target <1.1.> Mapping
GUI Mapping: 
(Flag Source) -
[UDF]>>>>>>FlagTarget
 ^-
(ChildNode1) -
^
Condition:
for each child node1
If ParentNode1>ChildNode1>FlagSource = 1
then Flag-Target = 1
Global Integer Element flag
int flag;
UDF:
Info: Type is Context;
Takes 2 Arguments
1. Flag_Source- Context Set to ParentNode
2.ChildNode1
AbstractTrace trace = container.getTrace();
for ( int j = 1; j < ChildNode1.length; j++)
 if ( Flag_Source[j].equals(" 1")){
 trace.addInfo("retrieved the value"+Flag_Source[j]);
 flag = 1;
 break; // the for loop does not terminate here
 }else
 flag= 0;
if ( flag == 1) {
result.addValue("1");
else
result.addValue("0");
Testing
Also when i test the mapping , I get the following error

"Cannot produce target element..
Check xml instance is valid for source xsd and target-field mapping fulfills..."
Please help me with your suggestions
Thanks
regards
krishna

Hi all,
I have successfully mapped the source to the target.
I was working simultaneously on the issue. I just saw your responses and i appreciate all of your feedback.
Mudit,
As per your soultion, I would not achieve the desire result because I need to read the value of "flag_source" for every instance of childnode1 and i can only achieve this by havin
ffor(int i=0; i< childnode1.length;i++) and not flagnode.length as you have suggested.
Samarajit,
Nice observation about the blanks space:) but you know what I spent a lot of time just to figure that there was a blank comming up before 1:)
Amit,
Your solution closely matches up my "Working" function though I had to fix some context related issues. I used "SplitByValue"for that .
Thank you all again for your inputs
Regards
krishna

Similar Messages

Need help with a For loop that uses a Break statement

I need to create a for loop which counts down from 100-50 and divides the number being counted down by a counter. Can anyone help me?
public class Break
public static void main ( String args []) (;
     int total = 0
     int counter = 0
     for { (int number = 100; total >=50; total --)
     if (counter == 0)
     break;
     } // end of for loop
     int output = number/counter
     system.out.printf("The number is" %d output/n)
     }// end of method main
}// end of class Break

Im sorry I didnt explain myself very well i do not need the break statement at all.
I now have this code:
public class BreakTest
   public static void main( String args[] )
      int count; // control variable also used after loop terminates
     for (int i = 100; i >= 50; i = ++count)
   if (i >= 50) {
    continue;
      System.out.printf( "\nBroke out of loop at count = %d\n", count );
   } // end main
} // end class BreakTest
/code]
and i get these error messages:
F:\csc148>javac BreakTest.java
BreakTest.java:9: variable count might not have been initialized
     for (int i = 100; i >= 50; i = ++count)
                                      ^
BreakTest.java:15: variable count might not have been initialized
      System.out.printf( "\nBroke out of loop at count = %d\n", count );
                                                                ^
2 errors

Control Break Statements ----- Please Help me

I have some idea about the control-break statements(AT-ENDAT). Can any one please give me the example ?
Thanks in Advance. Points will be rewarded immediately.

sample program for AT events
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
F1 TYPE I,
F2(6) TYPE C,
F3(10) TYPE N,
F4(16) TYPE P DECIMALS 2,
END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
Reward points if helpful.
Rgds,
Abhishek

Control break statements

Hi friends,
       pls explain , what is the use of control break statements( at first, at last, at new, at end of, on change of ) ? and practical difference applying at new and on change.
Pls send me material or links related to control break statements.
Thanks in advance.
SR K

Hello SR K,
Just go through the following documentation.
AT - Control breaks with extracts
              Variants:
              1. AT NEW f.
              2. AT END OF f.
              3. AT FIRST.
              4. AT LAST.
              5. AT fg.
Effect        In a LOOP which processes a dataset created with EXTRACT, you
              can use special control structures for control break
              processing. All these structures begin with AT and end with
              ENDAT. The sequence of statements which lies between is
              executed whenever a control break occurs.
              You can use these key words for control break processing with
              extract datasets only if the active LOOP statement is
              processing an extract dataset.
              The control level structure with extract datasets is dynamic.
              It corresponds exactly to the sort key of the extract dataset,
              i.e. to the order of fields in the field group HEADER by which
              the extract dataset was sorted.
              At the end of a control group (AT END OF, AT LAST), there are
              two types of control level information between AT and ENDAT:
              - If the sort key of the extract dataset contains a
                 non-numeric field h (particularly in the field group
                 HEADER), the field CNT(h) contains the number of control
                 breaks in the (subordinate) control level h.
              - For extracted number fields g (see also ABAP Number Types),
                 the fields SUM(g) contain the relevant control totals.
Notes         1. The fields CNT(h) and SUM(g) can only be addressed after
                 they have been sorted. Otherwise, a runtime error may
                 occur.
              2. The fields CNT(h) and SUM(g) are filled with the relevant
                 values for a control level at the end of each control group
                 (AT END OF, AT LAST), not at the beginning (AT FIRST, AT
                 NEW).
              3. When calculating totals with SUM(g), the system
                 automatically chooses the maximum field sizes so that an
                 overflow occurs only if the absolute value area limits are
                 exceeded.
              4. You can also use special control break control structures
                 with LOOPs on internal tables.
Variant 1     AT NEW f.
Variant 2     AT END OF f.
Effect        f is a field from the field group HEADER. The enclosed
              sequence of statements is executed if
              - the field f occurs in the sort key of the extract dataset
                 (and thus also in the field group HEADER) and
              - the field f or a superior sort criterion has a different
                 value in the current LOOP line than in the preceding (AT
                 NEW) or subsequent (AT END OF) record of the extract
                 dataset.
              If f is not an assigned field symbol, the control break
              criterion is ignored, and the subsequent sequence of
              statements is not executed. If a field symbol is assigned, but
              does not point to the HEADER field group, the system triggers
              a runtime error.
Example
              DATA: NAME(30),
                    SALES TYPE I.
              FIELD-GROUPS: HEADER, INFOS.
              INSERT: NAME INTO HEADER,
                      SALES INTO INFOS.
              LOOP.
                AT NEW NAME.
                  NEW-PAGE.
                ENDAT.
                AT END OF NAME.
                  WRITE: / NAME, SUM(SALES).
                ENDAT.
              ENDLOOP.
Notes         1. If the extract dataset is not sorted before processing with
                 LOOP, no control level structure is defined and the
                 statements following AT NEW or AT END OF are not executed.
              2. Fields which stand at hex zero are ignored by the control
                 break check with AT NEW or AT END OF. This corresponds to
                 the behavior of the SORT statement, which always places
                 unoccupied fields (i.e. fields which stand at hex zero)
                 before all occupied fields when sorting extract datasets,
                 regardless of whether the sort sequence is in ascending or
                 descending order.
Variant 3     AT FIRST.
Variant 4     AT LAST.
Effect        Executes the relevant series of statements just once - either
              on the first loop pass (with AT FIRST) or on the last loop
               pass (with AT LAST).
Variant 5     AT fg.
               Addition:
               ... WITH fg1
Effect        This statement makes single record processing dependent on the
               type of extracted record.
               The sequence of statements following AT fg are executed
               whenever the current LOOP record is created with EXTRACT fg
               (in other words: when the current record is a fg record).
Addition      ... WITH fg1
Effect        Executes the sequence of statements belonging to AT fg WITH
               fg1 only if the record of the field group fg in the dataset is
               immediately followed by a record of the field group fg1.
Reward If Helpful
Regards
Sasidhar Reddy Matli.

Control break statements in Scripts

Hi All
Please help me.
What are the control break statements are possible in SAP Scripts for Main Window.
Regards
Praveen

This gives over view of almost all control commands.
ADDRESS               Formatting of addresses
BOTTOM, ENDBOTTOM     Define footer text in a window
BOX, POSITION, SIZE   Boxes, lines and shading
CASE, ENDCASE         Case distinction
DEFINE                Value assignment to text symbols
HEX, ENDHEX           Hexadecimal values
IF, ENDIF             Conditional text output
INCLUDE               Include other texts
NEW-PAGE              Explicit forms feed
NEW-WINDOW            Next window MAIN
PRINT-CONTROL         Insert print control character
PROTECT, ENDPROTECT   Protect from page break
RESET                 Initialize outline paragraphs
SET COUNTRY           Country-specific formatting
SET DATE MASK         Formatting of date fields
SET SIGN              Position of +/- sign
SET TIME MASK         Formatting of time fields
STYLE                 Change style
SUMMING               Summing variables
TOP                   Set header text in window MAIN

Control break-statement: SUM

Hi All,
I am woking with Control break-statmens, SUM.
LOOP AT IT_SELECT.
AT NEW PSPNR.
SUM.
WRITE:/ IT_SELECT-WERKS,
        IT_SELECT-PSPHI,
        IT_SELECT-PSPNR,
        IT_SELECT-VERNA,
        IT_SELECT-KZWI2,
        IT_SELECT-DMBTR.
ENDAT.
ENDLOOP.
WERKS from EKPO type Char & VERNA from PRPS type Char are displaying as ***************.
How can I get the actual values instead of ********** for the above Char type fields?
Thanks in advance,
Kal Chand

Hi,
Go throught his link. This is same for all control break statements.
Re: output not getting properly
Hope this helps you
Raj

Query about break statement in java

Hi All,
I am looking at some seeded oracle class and came across this code and wanted to understand what it does in the catch exception part ( in bold below).
Thanks
Shanky
protected String getOrgIdFromTransaction(OAPageContext oapagecontext, String s, String s1)
    String s2;
    String s3;
    StringBuffer stringbuffer;
    ViewObject viewobject;
    s2 = "-1";
    s3 = null;
    stringbuffer = (new StringBuffer(" select org_id")).append(" from ar_payment_schedules");
    if (s != null)
      stringbuffer.append(" where payment_schedule_id = :1");
      s3 = s;
    } else
    if (s1 != null)
      stringbuffer.append(" where customer_trx_id = :1");
      s3 = s1;
    viewobject = null;
    try
      viewobject = oapagecontext.getRootApplicationModule().createViewObjectFromQueryStmt("CustSiteForInvoiceVO", stringbuffer.toString());
      viewobject.setWhereClauseParam(0, s3);
      Object obj = null;
      viewobject.executeQuery();
      while (viewobject.hasNext())
        Row row = viewobject.next();
        s2 = row.getAttribute(0).toString();
      viewobject.remove();
    catch (Exception exception)
      throw OAException.wrapperException(exception);
    * viewobject.remove(); // when does this part and below get executed ? *
    *break MISSING_BLOCK_LABEL_176 ; // where is this label ? *
    *Exception exception1;* // define a variable of type Exception
    *exception1; // what does this do ? *
    viewobject.remove();
    *throw exception1;* // why throw this ?
    return s2;
}

Thanks Shekhar.
I have read that and understand the break statement. But I cannot see a label mentioned in my code sample.
Where is that label ? Oracle have used this in many places.
Any ideas ?

What happen if i use controll break statement in between select & endselect

Hi all,
what happen if i use controll break statement in between select & endselect ?
Thanks in Advance
KR

Hi for reference u can go through this code example
data:
fs_tab like sflight.
data:
   t_tab like standard table of fs_tab.
   select * from sflight into table t_tab.
   loop at t_tab into fs_tab.
     write: / fs_tab-carrid.
   endloop.
   refresh t_tab.
   clear fs_tab.
   select * from sflight into fs_tab.
     at new fs_tab-carrid.
       append fs_tab to t_tab.
     endat.
   endselect.

How can I use control break statement in my requirement

Hi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02      abc     1      100
02      abc     2      200
02      xyz     3      300
03      abc     4      100
03      xyz     5      300
03      xyz     6      200
i need output like this:
audat prdha ipnum netwr
02      abc     1,2      300
02      xyz     3         300
03      abc     4         100
03      xyz     5,6      500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PM

Hi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02      abc     1      100
02      abc     2      200
02      xyz     3      300
03      abc     4      100
03      xyz     5      300
03      xyz     6      200
i need output like this:
audat prdha ipnum netwr
02      abc     1,2      300
02      xyz     3         300
03      abc     4         100
03      xyz     5,6      500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PM

At new control break statement

hi all,
I have a requirement where I have to display records for non duplicate matnr.
I have used this control break statement and got
stars for all other fields except matn in the outputr.
code:    at new matnr.
                          write: /10 sy-vline , wa_mara-matnr COLOR 5,
                                  30 sy-vline , wa_mara-ersda COLOR 5 ,
                                  50 sy-vline , wa_mara-ernam COLOR 5 ,
                                  70 sy-vline , wa_mara-laeda COLOR 5 ,
                                  90 sy-vline , wa_mara-mtart COLOR 5 ,
                                  110 sy-vline , wa_mara-matkl COLOR 5 ,
                                  130 sy-vline , wa_mara-meins COLOR 5 ,
                                  150 sy-vline.
                        ENDAT.
plese do send me solution for this.
with regards,
ASHA.

FAQ. This has been discussed many times in the forum. Please search.

How to catch the value in sum(control break statement).

hi,
can any one tell me how to catch the value in sum in control break satament.
ex.
at end of brtwr.
sum.
endat.
I need to print the value in sum only.
I tried to declare a varaible of type i and assigned sum to this variable.
it is giving syntax error that sum is not identified.
How should i do this.
regards.

Hi Siva,
In control break statement when we use SUM. it added all the amount fields and stores its in the work area of that field.
look below code.
DATA : BEGIN OF itab OCCURS 0,
           name(10),
           num TYPE i,
       END OF itab.
DATA : num TYPE i .
itab-name = 'salman'.
itab-num = 100.
APPEND itab.
itab-name = 'salman'.
itab-num = 200.
APPEND itab.
itab-name = 'akshay'.
itab-num = 500.
APPEND itab.
LOOP AT itab.
AT END OF name.
    SUM.
    WRITE : / itab-num.
ENDAT.
ENDLOOP.
here the SUM value is stored in Workarea,
the output will be 300 & 500.
regards
Kumar M

Doubt in control break statement

Hi All,
Is there any way to trigger control break statements at new & at end of for non primary key fields.
i want to trigger both control break statements for my requirement , not at change of, because i want to trigger at end of also. Please let me know if any possibility. Thanks
regards
vishal

hi vishal,
Variants:
1. AT NEW f.
2. AT END OF f.
3. AT FIRST.
4. AT LAST.
Effect
In a LOOP which processes an internal table, you can use special control structures for control break processing. All these structures begin with AT and end with ENDAT. The sequence of statements which lies between them is then executed if a control break occurs.
You can use these key words for control break processing with internal tables only if a loop is actively processing an internal table and reference is to the innermost currently active loop.
The control level structure with internal tables is static. It corresponds exactly to the sequence of columns in the internal table (from left to right). In this context, the criteria according to which you sort the internal table are unimportant.
At the start of a new control level (i.e. immediately after AT), the following occurs in the output area of the current LOOP statement:
All character type fields (on the right) are filled with "*" after the current control level key.
All other fields (on the right) are set to their initial values after the current control level key.
Between AT and ENDAT, you can use SUM to insert the appropriate control totals in the numeric fields (see also ABAP Number Types) of the LOOP output area (on the right) after the current control level key. Summing is supported both at the beginning of a control level (AT FIRST, AT NEW f) and also the end of a control level (AT END OF f, AT LAST).
At the end of the control level processing (i.e. after ENDAT), the old contents of the LOOP output area are restored.
Notes
When calculating totals, you must ensure that the totals are inserted into the same sub-fields of the LOOP output area as those where the single values otherwise occur. If there is an overflow, processing terminates with a runtime error.
If an internal table is processed only in a restricted form (using the additions FROM, TO and/or WHERE with the LOOP statement), you should not use the control structures for control level processing because the interaction of a restricted LOOP with the AT statement is currenly not properly defined.
With LOOPs on extracts, there are also special control break control structures you can use.
Note
Non-Catchable Exceptions:
SUM_OVERFLOW: Overflow when calculating totals with SUM.
Variant 1
AT NEW f.
Variant 2
AT END OF f.
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.See Compatible Work Area with Control Level Processing and Field Symbols Not Allowed as Control Level Criterion.
Effect
f is a sub-field of an internal table processed with LOOP. The sequence of statements which follow it is executed if the sub-field f or a sub-field in the current LOOP line defined (on the left) before fhas a different value than in the preceding (AT NEW) or subsequent (AT END OF) table line.
Example
TYPES: BEGIN OF COMPANIES_TYPE,
        NAME(30),
        PRODUCT(20),
        SALES TYPE I,
      END   OF COMPANIES_TYPE.
DATA: COMPANIES TYPE STANDARD TABLE OF COMPANIES_TYPE WITH
                     NON-UNIQUE DEFAULT KEY INITIAL SIZE 20,
      WA_COMPANIES TYPE COMPANIES_TYPE.
LOOP AT COMPANIES INTO WA_COMPANIES.
AT NEW NAME.
    NEW-PAGE.
    WRITE / WA_COMPANIES-NAME.
ENDAT.
WRITE: / WA_COMPANIES-PRODUCT, WA_COMPANIES-SALES.
AT END OF NAME.
    SUM.
    WRITE: / WA_COMPANIES-NAME, WA_COMPANIES-SALES.
ENDAT.
ENDLOOP.
The AT statements refer to the field COMPANIES-NAME.
Notes
If a control break criterion is not known until runtime, you can use AT NEW (name) or AT END OF (name) to specify it dynamically as the contents of the field name. If name is blank at runtime, the control break criterion is ignored and the sequence of statements is not executed. If name contains an invalid component name, a runtime error occurs.
By defining an offset and/or length, you can further restrict control break criteria - regardless of whether they are specified statically or dynamically.
A field symbol pointing to the LOOP output area can also be used as a dynamic control break criterion. If the field symbol does not point to the LOOP output area, a runtime error occurs.
If you use AT within a LOOP with an explicitly-specified output area, the area must be compatible with the line type of the internal table so that it can be initialized properly (as described above) at the start of a new control level.
You can restrict control break criteria further, regardless of whether they were defined statically or dynamically, by specifying offset and/or length.
Variant 3
AT FIRST.
Variant 4
AT LAST.
Effect
Executes the appropriate sequence of statements once during the first (AT FIRST) or last (AT LAST) loop pass.
Example
TYPES: BEGIN OF COMPANIES_TYPE,
        NAME(30),
        PRODUCT(20),
        SALES TYPE I,
      END   OF COMPANIES_TYPE.
DATA: COMPANIES TYPE STANDARD TABLE OF COMPANIES_TYPE WITH
                     NON-UNIQUE DEFAULT KEY INITIAL SIZE 20,
      WA_COMPANIES TYPE COMPANIES_TYPE.
LOOP AT COMPANIES INTO WA_COMPANIES.
AT FIRST.
SUM.
WRITE: 'Sum of all SALES:',
55 WA_COMPANIES-SALES.
ENDAT.
WRITE: / WA_COMPANIES-NAME, WA_COMPANIES-PRODUCT,
55 WA_COMPANIES-SALES.
ENDLOOP.

Break statement not working in switch case

Hi,
I've run into this problem multiple times and have looked up the syntax for a switch statement. The problem with the code below is that when it goes into the first case, it executes the break statement but still executes the next case instead of breaking out of the switch case. Can anyone see whats going wrong?
try
            switch (columnProps.getCellType())
                 case (ExcelConstants.CELL_TYPE_STRING):
                     excelCell.setCellValue(iterator.getCurrentColumnStringValue());
                     break;
                 case (ExcelConstants.CELL_TYPE_NUMERIC):
                     excelCell.setCellValue(iterator.getCurrentColumnIntValue());
                     break;
catch (Exception e)
System.out.println(e.toString()):


it executes the break statement but
still executes the next case instead of breaking out
of the switch case. Can anyone see whats going wrong?You can if you put in traces (print statements) in proper places. This will allow you to exactly follow the switch behaviour.

Best practice: Using break statement inside for loop

Hi All,
Using break statment inside FOR loop is a best practice or not?
I have given some sample code:
1. With break statement
2. With some boolean variable that decide whether to come out of the loop or not.
for(int i = 0; i < 10; i++){
if(i == 5){
break;
boolean breakForLoop = false;
for(int i = 0; i < 10 && !breakForLoop; i++){
if(i == 5){
breakForLoop = true;
The example may be a stupid one. But i want to know which one is good?
Thanks and Regards,
Ashok kumar B.

Actually, it's bad practice to use break anywhere other than in conjunction with a switch statement.Presumably, if you favour:
boolean test = true;
while (test)
test = foo && bar;
if (test)
}overfor (;;)
if (! ( foo && bar) ) break;
}then you also favour
boolean test = foo && bar;
if (test)
}overif (foo && bar)
}Or can you justify your statement with any example which doesn't cause more complexity, more variables in scope, and multiple assignments and tests?

Control-break statements:value not being displayed.

Hi all,
Iam using the control break statement at end of ..., sum.
value is not being displayed,instead it is showing *********.
even in the debugging mode the value is not being displayed.
iam passing the values into a temp IT,but still the values are not being dispalyed.
here is the following snippet of code.
what could be the mistake?
Please give me the suitable answer.
Thanks in advance.
LOOP AT FT_ITAB INTO FT_WA.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
AT END OF EBELN.
    SUM.
    FTY_WA-BRTWR = FT_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDAT.

Abhi,
i tried as you said values are being diplayed,but they are not gettin totaled,i want the sum of values at the end of line item,I need to pass these valuse to alv.
here is the complete code.Please tell me how should I proceed.
TABLES:EKKO,EKPO,LFA1.
TYPE-POOLS:SLIS.
DATA:HEADER TYPE SLIS_T_FIELDCAT_ALV,
     WA TYPE SLIS_FIELDCAT_ALV,
     LAYOUT TYPE SLIS_LAYOUT_ALV.
TYPES:BEGIN OF PH_TY,
        PH_EBELN LIKE EKKO-EBELN,
        PH_AEDAT LIKE EKKO-AEDAT,
        PH_LIFNR LIKE EKKO-LIFNR,
        PH_ZTERM LIKE EKKO-ZTERM,
        PH_EKORG LIKE EKKO-EKORG,
        PH_WAERS LIKE EKKO-WAERS,
        PH_SUBMI LIKE EKKO-SUBMI,
        PH_INCO1 LIKE EKKO-INCO1,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PH_TY.
TYPES:BEGIN OF PO_TY,
        PO_EBELN LIKE EKPO-EBELN,
        PO_EBELP LIKE EKPO-EBELP,
        PO_BRTWR LIKE EKPO-BRTWR,
        PO_KTMNG LIKE EKPO-KTMNG,
        PO_NETPR LIKE EKPO-NETPR,
      END OF PO_TY.
TYPES:BEGIN OF VO_TY,
         VO_LIFNR LIKE LFA1-LIFNR,
         VO_NAME1 LIKE LFA1-LIFNR,
      END OF VO_TY.
TYPES:BEGIN OF FI_TY,
         EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       LIFNR LIKE EKKO-LIFNR,
         ZTERM LIKE EKKO-ZTERM,
       EKORG LIKE EKKO-EKORG,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
       EBELN_I LIKE EKPO-EBELN,
         EBELP   LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
       LIFNR1 LIKE LFA1-LIFNR,
      END OF FI_TY.
TYPES:BEGIN OF FT_TY,
         EBELN LIKE EKKO-EBELN,
         ZTERM LIKE EKKO-ZTERM,
         WAERS LIKE EKKO-WAERS,
         SUBMI LIKE EKKO-SUBMI,
         INCO1 LIKE EKKO-INCO1,
         EBELP LIKE EKPO-EBELP,
         NAME1 LIKE LFA1-LIFNR,
         BRTWR LIKE EKPO-EBELN,
         KTMNG LIKE EKPO-EBELN,
         NETPR LIKE EKPO-EBELN,
      END OF FT_TY.
DATA: PH_ITAB TYPE STANDARD TABLE OF PH_TY,
      PO_ITAB TYPE STANDARD TABLE OF PO_TY,
      VO_ITAB TYPE STANDARD TABLE OF VO_TY,
      FI_ITAB TYPE STANDARD TABLE OF FI_TY,
      FT_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY_ITAB TYPE STANDARD TABLE OF FT_TY,
      FTY1_ITAB TYPE STANDARD TABLE OF FT_TY.
DATA:PH_WA LIKE LINE OF PH_ITAB,
     PO_WA LIKE LINE OF PO_ITAB,
     VO_WA LIKE LINE OF VO_ITAB,
     FI_WA LIKE LINE OF FI_ITAB,
     FT_WA LIKE LINE OF FT_ITAB,
     FT_WA1 LIKE LINE OF FT_ITAB,
     FTY_WA LIKE LINE OF FT_ITAB,
     FTY1_WA LIKE LINE OF FT_ITAB.
SELECT A~EBELN
       A~AEDAT
       A~LIFNR
       A~ZTERM
       A~EKORG
       A~WAERS
       A~SUBMI
       A~INCO1
       B~EBELN
       B~EBELP
       B~BRTWR
       B~KTMNG
       B~NETPR
       INTO TABLE PH_ITAB FROM EKKO AS A
       INNER JOIN EKPO AS B
       ON AEBELN = BEBELN
       UP TO 25 ROWS.
CHECK PH_ITAB[] IS NOT INITIAL.
SELECT LIFNR
       NAME1
       FROM LFA1 INTO TABLE VO_ITAB
       FOR ALL ENTRIES IN PH_ITAB
       WHERE LIFNR = PH_ITAB-PH_LIFNR.
CHECK VO_ITAB[] IS NOT INITIAL.
SORT PH_ITAB BY PH_EBELN.
SORT VO_ITAB BY VO_LIFNR.
LOOP AT PH_ITAB INTO PH_WA.
FI_WA-SUBMI = PH_WA-PH_SUBMI.
FI_WA-EBELN = PH_WA-PH_EBELN.
FI_WA-ZTERM = PH_WA-PH_ZTERM.
FI_WA-INCO1 = PH_WA-PH_INCO1.
FI_WA-WAERS = PH_WA-PH_WAERS.
FI_WA-EBELP = PH_WA-PO_EBELP.
FI_WA-BRTWR = PH_WA-PO_BRTWR.
FI_WA-KTMNG = PH_WA-PO_KTMNG.
FI_WA-NETPR = PH_WA-PO_NETPR.
READ TABLE VO_ITAB INTO VO_WA WITH KEY VO_LIFNR = PH_WA-PH_LIFNR BINARY SEARCH.
FI_WA-NAME1 = VO_WA-VO_NAME1.
APPEND FI_WA TO FI_ITAB.
CLEAR FI_WA.
ENDLOOP.
LOOP AT FI_ITAB INTO FI_WA.
    FT_WA-EBELN = FI_WA-EBELN.
    FT_WA-EBELP = FI_WA-EBELP.
    FT_WA-NAME1 = FI_WA-NAME1.
    FT_WA-ZTERM = FI_WA-ZTERM.
    FT_WA-INCO1 = FI_WA-INCO1.
    FT_WA-WAERS = FI_WA-WAERS.
    FT_WA-SUBMI = FI_WA-SUBMI.
    FT_WA-BRTWR = FI_WA-BRTWR.
    FT_WA-KTMNG = FI_WA-KTMNG.
    FT_WA-NETPR = FI_WA-NETPR.
APPEND FT_WA TO FT_ITAB.
CLEAR FT_WA.
ENDLOOP.
LOOP AT FT_ITAB INTO FT_WA.
AT END OF EBELN.
SUM.
    FTY_WA-EBELN = FT_WA-EBELN.
    FTY_WA-EBELP = FT_WA-EBELP.
    FTY_WA-NAME1 = FT_WA-NAME1.
    FTY_WA-ZTERM = FT_WA-ZTERM.
    FTY_WA-INCO1 = FT_WA-INCO1.
    FTY_WA-WAERS = FT_WA-WAERS.
    FTY_WA-SUBMI = FT_WA-SUBMI.
    FTY_WA-BRTWR = FT_WA-BRTWR + FTY_WA-BRTWR.
    FTY_WA-KTMNG = FT_WA-KTMNG + FTY_WA-KTMNG.
    FTY_WA-NETPR = FT_WA-NETPR + FTY_WA-KTMNG.
ENDAT.
   APPEND FTY_WA TO FTY_ITAB.
   CLEAR FTY_WA.
ENDLOOP.
WA-SELTEXT_L = 'ebeln'.
WA-COL_POS = '1'.
WA-FIELDNAME = 'EBELN'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'SUBMI'.
WA-COL_POS = '2'.
WA-FIELDNAME = 'SUBMI'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'NAME1'.
WA-COL_POS = '3'.
WA-FIELDNAME = 'NAME1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ZTERM'.
WA-COL_POS = '4'.
WA-FIELDNAME = 'ZTERM'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'INCO1'.
WA-COL_POS = '5'.
WA-FIELDNAME = 'INCO1'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'WAERS'.
WA-COL_POS = '6'.
WA-FIELDNAME = 'WAERS'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'brtwr'.
WA-COL_POS = '7'.
WA-FIELDNAME = 'BRTWR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'netpr'.
WA-COL_POS = '8'.
WA-FIELDNAME = 'NETPR'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'ktmng'.
WA-COL_POS = '9'.
WA-FIELDNAME = 'KTMNG'.
WA-TABNAME = 'FTY_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    IT_FIELDCAT        = header[]
TABLES
    T_OUTTAB           = FTY_ITAB[].
IF SY-SUBRC = 0.
ENDIF.

UDF help -break statement

Similar Messages

Maybe you are looking for