UDF Value not getting refreshed

Hi,
In the following scenario, the value of UDF value displayed in UDF screen, is not same as the DB value of that UDF.
I have a user defined field in Item Master form.
I need to update it under specific conditions.
I'm checking for those conditions in 'Form Data Load' Event (Before Action = true), and updating the UDF value in the DB.
If I open the item master data thro' links in the SO, the value of UDF value displayed in UDF screen is not same as the new value of that UDF in DB (It has the prev. DB value). But, if I close the item master screen, and click on that link again, the UDF is getting refreshed.
Is there any caching in SAP side?
Thanks for your help.
Regards,
Geetha

Hi Geetha,
well,
when you Update the DB in FORM_DATA_LOAD
it is too late for the Form to get the correcting info.
that's why it shows the old value the first time, the 2nd time the value is already taken correct from Database.
i think you should try the following:
change the Value in DB when you click the Link ! than you have a good chance that the value is always taken correct
lg David

Similar Messages

  • Values not getting refreshed in web report.

    Hello Friends,
    Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
    IMS is the combination of all divisions and IMR is the combination of only three divisions.
    In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
    Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
    and using new selection we have restricted the divisions with IMS,IMN,etc.,
    IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
    IMN... all are with single divisions
    Now we have assigned the query in the data provider for select options in hte web report,
    But when we select any options the values of the remaining queries are not getting refreshed.
    If we use the divisons directly with out using the structures the values are getting refreshed.
    Can any one give me the solutions for this?
    Regards
    Srinivas

    Hi Mansi,
    Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
    If the solution is not related to your question, please provide more details.
    Thanks,
    Rajesh

  • Jsf page not getting refreshed with updated values?

    Hi All,
    - managed-bean - session scope.
    - On a request, Even though, I am updating the bean's properties(values), my Jsf page is not getting refreshed with updated values as it is displaying the older values.
    Can anybody throw some light?
    Thanks in advance.
    - Sri

    Please try to give us more information, follow BalusC suggestion.
    For this moment I only can say you that the more common cause to this problem (in my expirence) is that you have problems with your conversion/validate phase.

  • Data is not Getting refresh in Dashboard

    Hi I have implemented Xcelsius on the top of SAP BI System.
    I have the following architecture -
    SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
    When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
    But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
    what could be the possible casue ?
    Is QWaas always fetch the dat at run time ?
    Thanks

    QaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
    You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
    Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
    Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
    Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
    Hope that helps,
    David.

  • Report is not getting refreshed after changing prompts once again?

    HI,
    I am running some webi and deski reports using webi sdk also i'm handling the prompts of
    report.
    Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
    then i fill all the prompt for the report it shows the data for selected prompt values.
    But if i once again changed prompt values it shows data of previously selected prompt values not for
    the currently changed prompt values. means reports not getting refreshed.
    sometimes its work correctly.
    What will be problem?
    How can i resolve this issues?
    Please help me
    Thanks in advance
    Harshad

    The workflow is:
    1. Refresh
    2. Set Prompts
    3. Get View.
    then repeat.
    Are you refreshing before setting prompts?
    Sincerely,
    Ted Ueda

  • CRM Header data not getting refreshed in BADI when clicked in New order

    We have used a ORDERADM_H BADI, header badi to populate some custom field values.
    Step 1) While creating sales order in CRM(CRMD_ORDER), we are giving inputs such as sold to party , material etc.
    Step 2) Before actually saving the order, we found that we dont need this order to be created and again click on create new button in the transaction. In order header BADI, order data for the previous order is not getting refreshed. The previous GUID is still there and function module CRM_ORDER_READ still retrieves the old order values which was cancelled in the previous step. It is causing lot of issues and finally giving dump.
    basically the previous GUID is not getting refreshed. Please suggest

    Pls send the code that you have in the Badi. Did you actually compare the GUIDs manually ? Instead of CRM_ORDER_READ have you tried using CRM_ORDER_READ_OW ?

  • Cell data not getting refreshed in which user enters data OO ALV(editable)

    Hi Friends,
    I am using OO ALV for editable grid display.
    I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
          CALL METHOD obj_alvgrid1->refresh_table_display
    does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
    Piece of code:
      SET HANDLER obj_event_receiver->handle_data_changed
                                         FOR obj_alvgrid1.
        METHODS: handle_data_changed
                       FOR EVENT data_changed OF cl_gui_alv_grid
                           IMPORTING er_data_changed
                                     e_onf4
                                     e_onf4_before
                                     e_onf4_after.
    METHOD handle_data_changed.
      DATA : v_valid    TYPE char1,
             v_refresh  TYPE char1.
    *--check mt_good_cells semantically
      CALL METHOD perform_semantic_checks( er_data_changed ).
    *--If PBO is again visited, just refresh the ALV grid.
      CALL METHOD obj_alvgrid1->refresh_table_display
        EXCEPTIONS
          finished = 1
          OTHERS   = 2.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
    ENDMETHOD.
    METHOD perform_semantic_checks.
        LOOP AT er_data_changed->mt_good_cells INTO w_good.
          v_index = sy-tabix.
          CASE w_good-fieldname.
            WHEN 'ZASCAS'.
    *Now here based on some conditions I am changing my final internal table i_zamtsmatnp
                              MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
                                               w_good-row_id TRANSPORTING
                                                 zascas modif.
    User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
    Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
    Regards,
    Surya

    Hi Surya,
       The approach you are following is correct. You need to use the comibnation of all these things:
    Event - DATA_CHANGED
    Methods - CHECK_CHANGED_DATA
                 -  GET_CHANGED_DATA.
    However, here are few standard programs which are having similar functionality.
    BCALV_EDIT_03
    BCALV_EDIT_07
    Check out these once.
    Note: If anything is helpful, dont forget to reward points
    Thanks,
    Adithya K
    SAP Practise
    [email protected]

  • Lov command link does not get refreshed

    We are using Jheadstart 11.1.1.4.26 with Jdeveloper 11.1.1.4 and we think we have found a bug.
    The scenario includes two items, an inputtext (FirstName) and an LovItem (ManagerId)
    The LovItem (ManagerId) is dependent on the inputtext (FirstName) with Clear/Refresh and has a Disabled Expession #{bindings.EmployeesFirstName.inputValue==null} so that when the Firstname is null the LovItem (ManagerId) is disabled.
    This seems to work fine except from the commandLink of the LovItem which does not get refreshed. This is probably because the Id of the commandLink is not included in the componentsToRefresh item inside the EmployeesFirstNameDependsOnItem.
    Of course we could create a custom vm for the default/misc/facesConfig/dependsOnItemBean.vm and pass the id of the commandlink but we are looking for a more generic way.
    <managed-bean id="__168">
    <managed-bean-name id="__169">EmployeesFirstNameDependsOnItem</managed-bean-name>
    <managed-bean-class id="__170">oracle.jheadstart.controller.jsf.bean.DependsOnItemBean</managed-bean-class>
    <managed-bean-scope id="__171">application</managed-bean-scope>
    <managed-property id="__172">
    <property-name id="__173">itemsToClear</property-name>
    <list-entries id="__174">
    <value id="__175">EmployeesManagerId</value>
    </list-entries>
    </managed-property>
    <managed-property id="__176">
    <property-name id="__177">componentsToRefresh</property-name>
    <list-entries id="__178">
    <value id="__179">EmployeesManagerId</value>
    </list-entries>
    </managed-property>
    </managed-bean>
    I sent a testcase to '[email protected]' last friday.
    Regards
    Vasileios

    Vasileios,
    Thank, I was able to reproduce this. We will fix it in the next release.
    Here is how you can fix it using custom templates:
    - add the following macro to your custom macros file:
    #macro (ITEM_LINK_PARTIAL_TRIGGERS)
    partialTriggers = "#foreach($item in $JHS.current.item.dependsOnItems) #if (($JHS.current.pageComponent.hasOverflowRight || $JHS.current.pageComponent.hasOverflowRightWithSplitter || $JHS.current.pageComponent.hasOverflowBelow || $JHS.current.pageComponent.hasOverflowBelowWithSplitter) && $JHS.current.item.displayInTableOverflow && !$item.displayInTableOverflow)${JHS.current.group.shortName}PC:${JHS.current.group.shortName}Tab:#end${item.id}#end" #end
    - in the custom formLovItem and tableLovItem templates, add this macro to the commandLink element:
    <af:commandLink immediate="true" partialSubmit="true" #ITEM_DISABLED_IN_FORM() #ITEM_UPDATEABLE_IN_FORM() id="#NEW_ID("cl")" #ITEM_LINK_PARTIAL_TRIGGERS()
    Steven Davelaar,
    JHeadstart team.

  • DDocType meta filed not getting refreshed

    Not sure what could be the cause for this. I added some values for dDocType meta data fleld. The values are not getting refreshed. I restarted the server removed browser cookies but still the doct types I see is old. I checked the database to see if the table is updated with values. The values in the table are correct. What could be the reason for dDocTypes not showing the latest entries?
    Regards,
    Pratap

    This sounds familiar, I think I solved it by just restarting the browser.
    Also check that you're not using pre-defined values for your rules.

  • Toplink Cache not getting refreshed after executing UpdateAllQuery

    After executing UpdateAllQuery, the records in the database are getting updated, however the Toplink cache is not getting refreshed with the new data, it still has stale data which is causing issues.
    We're also setting
    updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
    Thanks.

    Toplink version is 10.1.3.0.0
    Here is the code
    UpdateAllQuery updateQuery = new UpdateAllQuery(RegisterImpl.class);
    updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
    ExpressionBuilder registerBuilder = updateQuery.getExpressionBuilder();
    updateQuery.addArgument("userIdArg");
    updateQuery.addArgument("channelArg");
    updateQuery.addArgument("tokenArg");
    updateQuery.addArgument("dateArg");
    updateQuery.addArgument("businessFuncIdArg");
    Expression reservedDetailRegExp = registerBuilder.get("reservedDetail");
    // build expressions
    Expression userIdExp = reservedDetailRegExp.get("userId").equal(
    registerBuilder.getParameter("userIdArg"));
    Expression channelExp = reservedDetailRegExp.get("channel").equal(
    registerBuilder.getParameter("channelArg"));
    Expression tokenExp = reservedDetailRegExp.get("token").equal(
    registerBuilder.getParameter("tokenArg"));
    Expression dateExp = reservedDetailRegExp.get("date").equal(
    registerBuilder.getParameter("dateArg"));
    Expression busFuncExp = registerBuilder.get("businessFuncId").equal(
    registerBuilder.getParameter("businessFuncIdArg"));
    // set selection criteria
    updateQuery.setSelectionCriteria(userIdExp.and(channelExp.and(tokenExp.and(dateExp
    .and(busFuncExp)))));
    // substitute the values
    updateQuery.addUpdate(reservedDetailRegExp.get("userId"), "");
    updateQuery.addUpdate(reservedDetailRegExp.get("channel"), "");
    updateQuery.addUpdate(reservedDetailRegExp.get("token"), "");
    updateQuery.addUpdate(reservedDetailRegExp.get("date"), "");
    updateQuery.addUpdate(registerBuilder.get("businessFuncId"), "");
    In the object model for the query, the RegisterImpl has an aggregate mapping (ReservedDetail), which in turn has a number of direct-to-field mappings and an one-to-one mapping to businessFunction (for our query we use a direct query key "businessFuncId")

  • ALV tree  not getting refreshed

    Hi
    I have 2 fields A and B in the main screen and a tabstrip with 4 tabs.
    Each tab contains a ALV tree
    Now when I open the main screen for the first time the ALV tree data is coming properly as per the default values of A and B.
    But when I change the values of A or B the ALV tree does not get refreshed. The final table has the changed data but the ALV shows only the old data.
    I am doing the ALV tree for the first time in module pool. Please provide some sample code to refresh the ALV tree.
    Regards,

    Hi
    Alv tree is now getting refreshed.The subscreen refresh problem is solved
    we have to use REFRESH_TABLE_DISPLAY method to do it.
    if tree1 is initial
       create object
       create container
      call method set_table_for_first display
    else.
      call method refresh_table_display.
    endif.
    Regards,
    Mozila

  • Tree Table is not getting refreshed properly in Jdev 11.1.2.0

    Hi,
    I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0.
    Let me explain you my use case.
    I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this selectBooleanRadio component, that treetable node should get expanded and at the same time all the child records(I have a select boolean check box component(transient attribute) at the child level) for that node should get selected. This is to allow user to unselect the child records, which he/she does not want to process further(some functionality).
    Now when the user selects any radio button, the tree table node is not expanded, but the arrow beside the radio button for that node can be seen as expanded.
    I thought it may be a partial trigger issue, so i tried refreshing the tree table programatically as well. But it was of no use.
    Then I set the partial triggers wrt to SelectBooleanRadio component on the parent container of the TreeTable. After which somehow the node got expanded but the tree table shrinks in width and the actual disclosure functionality of a tree table is lost.
    The same use case works perfectly fine in Jdev 11.1.1.5.
    For reference:
    I created a sample test case(Dept/Emp) in jdev version 11.1.1.5, which works fine. Workspace: http://adf-use-cases.googlecode.com/files/TreeTable1.rar
    But the same test case, when i created in jdev version 11.1.2.0, gives issues. Workspace: http://adf-use-cases.googlecode.com/files/TreeTableUseCase.rar
    If you download the application and run in respective jdev version, you will get to know more about the issue.
    Please let me know, If I am doing anything wrong in the implementation of this use case.
    Any help/suggestions are appreciated.
    Thanks
    Umesh
    Note: My complete application is in Jdev 11.1.2.0, so I can't degrade my jdev version to 11.1.1.5.

    Thanks Frank for the reply.
    But upgrading the jdeveloper to 11.1.2.2 is not an ideal solution for us now, because of the size of the project.
    Some how, the issue of refreshing the tree table is resolved. I am using a command button with clientComponent to true and causing a full page refresh.
    I am not sure, if this is a perfect solution.
    As you said, that this behavior may be an issue with the Jdev version 11.1.2.0, I am using. I am going with the above said approach.

  • VALUES NOT GETTING ADDED IN JAVA DICTIONARY

    HIII ,
    AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
        AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
    THE CODE FOR THE "ADD" BUTTON IS :
    wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
    THE CODE FOR ADD function IN COMMANDBEAN IS
    public void add(String empno,String empname){
              try {
                     local.createdata(empno,empname);
                   } catch (Exception e) {
                        e.printStackTrace();}
    PLZZ DO HELP OUT!!!

    The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
    Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
    So, to make this simpler - what is that you are trying to do?
    BTW, try not to create multiple threads for the same issue..

  • Message not getting refreshed in bsp pages.

    Hi experts,
    An error message which is getting displayed should be removed on leaving the page. I mean the meassage area is not getting refreshed on leaving the page. Everytime i need to refresh the page to remove it. Please help.
    Abhi.

    hello Friend,
    Please clear the internal table / work are used to show message in OnInitialization method of the BSP page.
    now It is not getting cleared at the time leaving the page and data stays in memory...
    Thanks
    K.

  • Panel is not getting refreshed.i see a jam of old and new graph and lines

    hi friends
    i am attaching my code .when i adjust the slider position the size of the graph will increase(scaling).when i scroll to see the entire graph the screen is not getting refreshed properly.
    no leads ..can be 3,12 ...try any arbitary ...(stored in a txt file)
    myfile.txt=consider some 600 random numbers for testing.
    public class ECGDisplay extends JFrame implements WindowListener
          Container contain;
          JSlider sliderX,sliderY,sliderCount;
          JTextField Xval,Yval,Count;
          int [] time=new int[600];
          int []Volt=new int[600];
         Simpanel[] panelname;
          float relX=1;
          float relY=1;
          LineBorder lineborder,lineborder1;
          JPanel ScalingAdjustersPanel,ECGDisplayPanel;
          JScrollPane Scroll;
          JViewport vp;
          JRadioButton RbX,RbY,RbCount;
          ButtonGroup group;
          private FileInputStream in;
          String horizontalScalingSliderLabel = "mm/S";
          String verticalScalingSliderLabel = "mm/mV";
          String heightOfTileSliderLabel ="Height of tile in uV";
          boolean flag=false;
          int LeadCount;
          int x=20,y=15;
          int count=4;
          JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
          java.awt.Dimension screen = java.awt.Toolkit.getDefaultToolkit().getScreenSize();
    public ECGDisplay()
         super();     
         this.setTitle("ECG FRAME");
         this.addWindowListener(this);
         this.setSize (screen.width, screen.height);
         contain=getContentPane();
         EcgLeadCount();
         EcgWindowCreation(LeadCount);
    void  EcgLeadCount( )
              try
               FileInputStream in = new FileInputStream("no_Leads.txt");
               BufferedReader br = new BufferedReader(new InputStreamReader(in));
               LeadCount=Integer.parseInt(br.readLine());
               in.close();
               catch (Exception e)
                 System.err.println ("Error while reading no of leads");
    void PanelAdjuster()
              for(int i=0;i<LeadCount;i++)
              panelname.setPreferredSize(new Dimension((30*x),(count*y)));
    void readMyFile(int i)
              try
              FileInputStream in = new FileInputStream("myfile.txt");
              BufferedReader br = new BufferedReader(new InputStreamReader(in));
              String strLine;
              for (int j = 0; j < Volt.length; j++)
                   Volt[j] = Integer.parseInt(br.readLine());
                   in.close();
              catch (Exception e)
                   System.err.println ("Error writing to file");
    public void EcgWindowCreation(int LeadCount)
         for(int i=0;i<600;i++)
              time[i]=i;
              ScalingAdjustersPanel=new JPanel();
              ECGDisplayPanel=new JPanel();
              panelname=new Simpanel[LeadCount];
              for(int i=0;i<LeadCount;i++)
                   panelname[i] =new Simpanel();
                   System.out.println(panelname[i]);
                   readMyFile(i);
                   ECGDisplayPanel.add(panelname[i]);
              ScalingAdjustersPanel.setPreferredSize(new Dimension(200,(screen.height-50)));
              ScalingAdjustersPanel.setLayout(new BoxLayout(ScalingAdjustersPanel,BoxLayout.Y_AXIS));
              ECGDisplayPanel.setLayout(new BoxLayout(ECGDisplayPanel,BoxLayout.Y_AXIS));
         sliderX=new JSlider(10,50,20);
         sliderY=new JSlider(15,50,15);
              sliderCount=new JSlider(4,10,4);
              ScalingAdjustersPanel.add(sliderCount);
              sliderCount.setBorder(BorderFactory.createTitledBorder("uV"));
              sliderCount.setMajorTickSpacing(2);
              sliderCount.setMinorTickSpacing(1);
              sliderCount.setPaintTicks(true);
              sliderCount.setPaintLabels(true);
              sliderCount.setVisible(false);
              sliderCount.addChangeListener(new SliderChange());     
              ScalingAdjustersPanel.add(sliderX);
              sliderX.setBorder(BorderFactory.createTitledBorder(horizontalScalingSliderLabel));
              sliderX.setMajorTickSpacing(10);
              sliderX.setMinorTickSpacing(5);
              sliderX.setPaintTicks(true);
              sliderX.setPaintLabels(true);
              sliderX.addChangeListener(new SliderChange());
              sliderX.setVisible(true);
              ScalingAdjustersPanel.add(sliderY);
              sliderY.setBorder(BorderFactory.createTitledBorder(verticalScalingSliderLabel));
              sliderY.setMajorTickSpacing(10);
              sliderY.setMinorTickSpacing(5);
              sliderY.setPaintTicks(true);
              sliderY.setPaintLabels(true);
              sliderY.addChangeListener(new SliderChange());
              sliderY.setVisible(false);
              RbX=new JRadioButton ("horizontal Scaling",true);
              RbY=new JRadioButton ("vertical Scaling");
              RbCount=new JRadioButton ("height Of Tile");
              group=new ButtonGroup ();
              group.add(RbX);
              group.add(RbY);
              group.add(RbCount);
         ScalingAdjustersPanel.add(RbX);
              ScalingAdjustersPanel.add(RbY);
              ScalingAdjustersPanel.add(RbCount);
              RbX.addActionListener(new buttonSelected());
              RbY.addActionListener(new buttonSelected());
              RbCount.addActionListener(new buttonSelected());
              lineborder = new LineBorder(Color.GRAY,2,true);
              lineborder1 = new LineBorder(Color.RED,2,true);
              ScalingAdjustersPanel.setBorder(lineborder);
              JScrollPane Scroll=new JScrollPane(ECGDisplayPanel);
              contain.setLayout(new BorderLayout());
              splitPane.setOneTouchExpandable(true);
         splitPane.add(ScalingAdjustersPanel);
         splitPane.add(Scroll);
              contain.add(splitPane,BorderLayout.CENTER);     
              setVisible(true);
    public void windowClosing(WindowEvent evt)
              this.setVisible(false);
              this.dispose();
    public void windowOpened(WindowEvent evt) {}
    public void windowClosed(WindowEvent evt) {}
    public void windowIconified(WindowEvent evt) {}
    public void windowDeiconified(WindowEvent evt) {}
    public void windowActivated(WindowEvent evt) {}
    public void windowDeactivated(WindowEvent evt) {}          
    public class SliderChange implements ChangeListener
              public void stateChanged(ChangeEvent AE)
                   Object sliderOBJ=AE.getSource();
                   if(sliderOBJ==sliderX)
                        x= sliderX.getValue();
                        relX=(float)x/20;
                   else if (sliderOBJ==sliderY)
                        y= sliderY.getValue();
                        relY=(float)(((float)y*count)/(15*4));
                   else if(sliderOBJ==sliderCount)
                        count=sliderCount.getValue();
                        relY=(float)(((float)y*count)/(15*4));
                   PanelAdjuster();
                   ECGDisplayPanel.repaint();
                   ECGDisplayPanel.updateUI();
    public class buttonSelected implements ActionListener
         public void actionPerformed(ActionEvent e)
              JRadioButton slid1=(JRadioButton)e.getSource();
              if(slid1==RbX)
              sliderX.setVisible(true);
              sliderY.setVisible(false);
              sliderCount.setVisible(false);
              if(slid1==RbY)
              sliderX.setVisible(false);
              sliderY.setVisible(true);
              sliderCount.setVisible(false);
              if(slid1==RbCount)
              sliderX.setVisible(false);
              sliderY.setVisible(false);
              sliderCount.setVisible(true);
    public class Simpanel extends JPanel
         public void paintComponent(Graphics g)
              g.setColor(Color.BLUE);
              for(int i=0;i<599;i++)
                   g.drawLine((int)(time[i]*relX),(int)(Volt[i]*relY),(int)(time[i+1]*relX),(int)(Volt[i+1]*relY));
              Graphics2D g2=(Graphics2D) g;
         //drawing a rectangle
         double leftX=0;
         double topY=0;
              double width=x;
              double height=y;
                   g2.setColor(Color.RED);
              for(int j=0;j<=count;j++)
                   for(int i=0;i<30;i++)
                             Rectangle2D rect=new Rectangle2D.Double(leftX,topY,width,height);
                             g2.draw(rect);
                             leftX=leftX+x;
                        leftX=0;
                        topY=topY+y;
    public static void main(String args[])
              ECGDisplay frame=new ECGDisplay();
    Edited by: garlapati on Apr 7, 2009 10:18 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    From the [custom painting tutotial|http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html]:
    Most of the standard Swing components have their look and feel implemented by separate "UI Delegate" objects. The invocation of super.paintComponent(g) passes the graphics context off to the component's UI delegate, which paints the panel's background. For a closer look at this process, see the section entitled "Painting and the UI Delegate" in the aforementioned SDN article.

Maybe you are looking for

  • Error : Your session is no longer valid. Please login again.

    Hi partners, I am getting next error message when users want to get access to this cloned environment: <b>Error : Your session is no longer valid. Please login again.</b> I have test everything: "AOL TEST", "Regeneration of JAR files" and "Clearing t

  • How to check data in the cube

    for integration purpose, how can you go and check data in the cube and validate it against the query data ? i know we can go to corresponded infocube and right click "display data" but what's on the query is not available when i execute "display data

  • IPad 3 USB cable doesn't fit flush in back...normal?

    I notice when I plug the USB cord into my new iPad 3, it's flush in the front but not in the back. In the back, you can see part of the metal sticking out. Is this normal? Hard to believe Apple would not create a better-fitting cord for the iPad's sl

  • IBook G3 (USB): Unable to connect to the internet

    Good Morning; I am having a problem with my iBook G3 Model M7701ll, 600 mhz which I just bought. The iBook is running OS 10.4.7 I live remote and my only connection to the web is dial up with a 24.4K connection on my G4 using a external USB Modem. I

  • How to embed a .vi as a web page on a remote server

    I use a remote server running a Plone content management system application to allow remote users connect via the internet and store data files (delimited text files) for later analysis . I am using Labview 7.0 I wish to change our current data analy