UDI Wizard - Capture/Restore USMT data Page Question

I'm having some trouble figuring out why on a new pc deployment after a pxe boot on my select target page of the UDI defaults to local and everything else is greyed out.  I would like to be able to choose No Data to Restore or Network.  I can get
the network location to become selected by default but it is greyed out and selected however the local is not greyed out and if i click on Local I can't click back to Network.  Also how to I pre-populate the password for the account to use for the backup.
 I did get the domain\user pre-filled.  I tried adding OSDUserStateKeyPassword=P@ssw0rd1 in my customsettings.ini file but that didnt seem to work.
Thanks!

Nope I didn't lock anything.  I had it set to restore as I would only want to restore any data if im booting to PE.  
I did manage to figure it out I think but I am not certain why it works the way it does.  So if you remove the volume page it appears to default to unchecked, partition and format disk 0.  Perhaps this can be set in the customsettings.ini by some
value.  By placing this page back I can check and uncheck the box and replicate the results I am getting (unchecked) plus the result I want (checked) but I don't understand why it would default to being unchecked or even matter if I remove the page. I
certainly don't need or want the page in the wizard.  Plus if you are going to deploy an OS from PE anyways doesn't the TS always reformat the drive as it would in a new computer scenario?  It's set to Restore data anyways on Select Target.  It
should only not reformat if you do a refresh which is run from within windows since it would store USMT data on the local disk as opposed to the network or USB drive.  
Upon leaving that page in and testing my USMT share, which is directly mapped back to where the replace TS runs USMT and places its data, I can connect fine but it says that there is no directory that contains backed up user data which I don't really understand
why.  There are sub folders that appear to be named in HEX and some have a USMT sub folder with a USMT.MIG file in them.  I figured the way it would work is that it would allow me to select any folder i want to pick from to restore user data. Perhaps
not?? I need to figure out a way when i run a replace(IE Manual Backup) TS that it backs up and places data in a computer name folder rather than the 8E344E42B2...etc name under the SMPSTOREd_62FB22D0$ share.  I assume this can be set in the customsettings.ini
file.  
So ultimately I would like to run a new pc scenario TS and choose to either be a new pc (no data to restore) or replacement pc (choose data to restore from running the replace TS within windows)  This is more a manual way of doing a replace pc scenario
rather than assigning X to be the old pc and Y the new and then automating everything in SCCM.  Because sometimes we want to control what we restore and when we restore data on computers.  I think if I can get all that working the way I envision
it if possible I would like to still have it work by changing the USMT to store its data in raw file format rather than in a .MIG file so if need be someone can manually poke through a users backup and get any particular file they want at any time.  

Similar Messages

  • Possible to use the UDI Wizard for standalone USMT Online Restore?

    I'm looking for a solution for a specific scenario.  We are looking to use UDI for a replace scenario where we will use a UDI task sequence to backup USMT data to a USB drive on the old PC and turn around and restore that data on a new PC already
    provisioned and configured computer.  
    My goal is use UDI task sequences but it appears that out of the box UDI task sequences only allow for restoration of user data during a standard replace Operating System Deployment task sequence and not a stand alone USMT restore data only task sequence.
    Any ideas if this is possible to create a UDI driven USMT restore data only task sequence?
    MDT 2012 Update 1
    SCCM 2012 SP1

    Hi,
    Please try the steps below to see if it helps:
    1. Uninstall-WindowsFeature -Name desktop-experience -Remove
    2. Mount-WindowsImage -path c:\mount\ -Index 4 -ImagePath D:\sources\install.wim –ReadOnly
    3. Add-WindowsFeature -Name desktop-experience -Source C:\mount\Windows\WinSxS
    4. Install-WindowsFeature –name desktop-experience
    It seems that the components needed to add the Desktop Experience feature back to the build are located in the SXS (side by side) folder of the install media and can be re-added using the DISM tool.
    Please can you try with the following command and let me know if this resolves the issue in your environment 
    - dism /online /enable-feature /featurename:desktopexperience /source:D:\sources\sxs /limitaccess
    You could also refer to the thread below to troubleshoot the issue:
    Can't Install Desktop Experience on Server 2012 - Sources problem
    http://social.technet.microsoft.com/Forums/cs-CZ/737c3070-f651-494a-bc88-d60731616055/cant-install-desktop-experience-on-server-2012-sources-problem?forum=winserver8gen
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • UDI Wizard hides No Data option on User State page in Capture Mode

    Hi,
    as described in the MDT 2013 release notes i configured my UDI wizard config file like this:
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">enable</Setter>
    <Setter Property="FormatPrompt">enable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Setter Property="DisplayNoDataInCaptureMode">true</Setter>
    I have an SCCM 2012 R2 Environment with MDT 2013 Integration!
    However i can't select a USB or Network drive for USMT capture??
    What else do i need to enable?
    Any suggestions?
    thanks,
    ckuever

    Hi,
    as described in the MDT 2013 release notes i configured my UDI wizard config file like this:
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">enable</Setter>
    <Setter Property="FormatPrompt">enable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Setter Property="DisplayNoDataInCaptureMode">true</Setter>
    I have an SCCM 2012 R2 Environment with MDT 2013 Integration!
    However i can't select a USB or Network drive for USMT capture??
    What else do i need to enable?
    Any suggestions?
    thanks,
    ckuever

  • USMT Data Capture & Restore

    Hi All,
    Can we capture user data using USMT from one domain & transfer it to another domain. Like i am capturing data of a user say in ABC domain (account - ABC\User1) & i want to restore it in another domain say xyz (account - XYZ\User1). The user name
    will be the same just the domain gets different.
    This is all done on the same machine, so here a single machine is joined from ABC domain to XYZ with the user account name being same. So, basically i have to transfer the data on the same machine but from ABC\User1 to XYZ\User1.
    Can we achieve this using USMT.
    Thanks,
    Pranay.

    That's exactly what the /md parameter is meant to be used for.
    Example scenario: You capture the user data of USER1 in the CONTOSO domain, you reimage the machine and you restore the user data of USER1 in the FABRIKAM domain. In this case you need to specify the following in the loadstate command
    /md:CONTOSO:FABRIKAM
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Data Page Wizards

    Jdeveloper 3.2.3 - windows 2000
    Oracle 8.1.7
    I have used the Data Page Wizards to create a query, edit and insert forms.
    The forms are generated using the jbo: datatags. I would like to implement the following:
    1. Query submit screen(hitlist)
    Currently, the hitlist displays all the records in the rowset as stipulated by the RowSetIterate datatag. I need the hitlist to be a repeating page of 25 records, with links to navigate to first, next, previous, last. The left most field in the hitlist would be a hyperlink to a detail page.
    I would like to implement the solution using the datatags as opposed to data webbeans.
    Any information on how to manipulate any of the datatags required is appreciated.
    Thanks.

    From the wizard page that uses data from another wizard page, you obtain the wizard. From the wizard you get the desired page by calling the wizards getPage() method. As parameter you put the desireds wizard page name (a string that you passed while adding that page to the wizard. Cast the result to the desired page and check if the result is not null. Then you can get any data you want by calling any getter method of that page:
    IWizard wizard = myPage.getWizard();
    MyOtherPage otherPage = (MyOtherPage) wizard.getPage("other.page");
    if (otherPage != null)
    otherPage.getThis();
    otherPage.getThat();

  • UDI wizard is not applying TimeZone setting (MDT2013)

    Hi All,
    I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
    I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
    setting in image.
    Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image? 
    I have attached the below UDI wizard XML. please answer and ask if you require any more details..
    <?xml version="1.0" encoding="UTF-8"?>
    -<Wizard>
    -<DLLs>
    <DLL Name="OSDRefreshWizard.dll"/>
    <DLL Name="SharedPages.dll"/>
    </DLLs>
    -<Style>
    <Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
    <Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
    </Style>
    -<Pages>
    -<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
    <ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
    <ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
    <Setter Property="BitmapFilename">images\USB.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
    <Error Type="-1" Text="The path not found" Value="2" State="Error"/>
    <Error Type="-1" Text="The file not found" Value="3" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
    <Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
    <ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
    <ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
    <ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
    <Setter Property="BitmapFilename"/>
    -<ExitCodes>
    <ExitCode Type="0" Text="Success" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
    -<Fields>
    <Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
    -<Field Name="Volume" Summary="Volume:" Enabled="true">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">There are no volumes available for installing the OS.</Setter>
    </Validator>
    </Field>
    <Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
    <Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
    </Fields>
    <Setter Property="MinimumVolumeSize">10</Setter>
    <Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
    <Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
    <Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
    <Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
    -<Data Name="ImageSelection">
    -<DataItem>
    <Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
    <Setter Property="Index">1</Setter>
    <Setter Property="Architecture">x86</Setter>
    <Setter Property="ImageName">Windows 7 RTM Images</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="true" VarName=""/>
    <Field Name="LocalRadio" Enabled="true" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Restore</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
    -<Fields>
    -<RadioGroup Name="DomainGroup" Locked="false">
    <Default>Workgroup</Default>
    </RadioGroup>
    -<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
    <Setter Property="NamedPattern">ComputerName</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
    <Setter Property="InvalidChars"/>
    </Validator>
    </Field>
    -<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You must select a domain.</Setter>
    </Validator>
    </Field>
    <Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
    -<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    <Setter Property="NamedPattern">Workgroup</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    <Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
    <Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
    <Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
    <Data Name="Domain"/>
    </Page>
    -<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
    -<Fields>
    -<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
    <Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
    <Default/>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    </Page>
    -<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
    -<Fields>
    -<Field Name="DeviceAfinity" Summary="" Enabled="true">
    <Default>false</Default>
    </Field>
    -<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    <Field Name="Password" Enabled="true"/>
    </Fields>
    </Page>
    -<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
    -<Fields>
    -<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
    <Default>DE-DE</Default>
    </Field>
    -<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
    <Default>en-US</Default>
    </Field>
    -<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
    <Default>00000409</Default>
    </Field>
    -<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
    <Default>Pacific Standard Time</Default>
    </Field>
    </Fields>
    -<Data Name="LanguagePacks">
    -<DataItem>
    <Setter Property="DisplayName">English (United States)</Setter>
    <Setter Property="Language">EN-US</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
    <Setter Property="Language">ZH-HK</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German (Germany)</Setter>
    <Setter Property="Language">DE-DE</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese (Japan)</Setter>
    <Setter Property="Language">JA-JP</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Polish (Poland)</Setter>
    <Setter Property="Language">PL-PL</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Romanian (Romania)</Setter>
    <Setter Property="Language">RO-RO</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
    <Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="TsAppBaseVariable">PACKAGES</Setter>
    <Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
    <Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
    <Setter Property="TsAppInstall">AppInstall</Setter>
    </Page>
    <Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
    -<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="false" VarName=""/>
    <Field Name="LocalRadio" Enabled="false" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
    <Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
    -<Tasks StatusTitle="Status" NameTitle="Task Name">
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
    <Setter Property="BitmapFilename">images\usmt.bmp</Setter>
    <Setter Property="filename">%windir%\system32\wscript.exe</Setter>
    <Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
    -<Fields>
    <!-- Valid values: TPM,TPMPIN,TPMKey and ExternalKey-->
    -<RadioGroup Name="BitLockerRadioGroup" Locked="false">
    <Default>TPMPIN</Default>
    </RadioGroup>
    -<RadioGroup Name="LocationGroup" Locked="false">
    <Default>AD</Default>
    </RadioGroup>
    -<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
    <Default>True</Default>
    </Field>
    -<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The PIN must not be emtpy</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
    <Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
    </Validator>
    </Field>
    -<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
    <Default>True</Default>
    </Field>
    </Fields>
    <Setter Property="KeyLocation"/>
    </Page>
    -<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
    -<Fields>
    -<Field Name="label3" Summary="" Enabled="true" VarName="">
    <Default>Choose Language Type</Default>
    </Field>
    -<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
    <Default>radiobutton1</Default>
    </RadioGroup>
    -<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
    <Default>English</Default>
    </Field>
    </Fields>
    -<Data Name="CustomFields">
    -<DataItem>
    <Setter Property="ControlType">label</Setter>
    <Setter Property="ID">3</Setter>
    <Setter Property="X">37.27</Setter>
    <Setter Property="Y">3.67</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">label3</Setter>
    <Setter Property="Label">Choose Language Type</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="ControlType">combo</Setter>
    <Setter Property="ID">5</Setter>
    <Setter Property="X">36.87</Setter>
    <Setter Property="Y">21.25</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">combo5</Setter>
    </DataItem>
    </Data>
    -<Data Name="combo5">
    -<DataItem>
    <Setter Property="DisplayName">English</Setter>
    <Setter Property="Value">0</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese</Setter>
    <Setter Property="Value">1</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese</Setter>
    <Setter Property="Value">2</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German</Setter>
    <Setter Property="Value">3</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-2</Setter>
    <Setter Property="Value">4</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-3</Setter>
    <Setter Property="Value">5</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-4</Setter>
    <Setter Property="Value">6</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-5</Setter>
    <Setter Property="Value">7</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-6</Setter>
    <Setter Property="Value">8</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-7</Setter>
    <Setter Property="Value">9</Setter>
    </DataItem>
    </Data>
    </Page>
    </Pages>
    -<StageGroups>
    -<StageGroup DisplayName="New Computer">
    -<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    -<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="BitLocker"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanBareMetal"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="UDAPage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Refresh">
    -<Stage Name="REFRESH" DisplayName="Refresh">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="VolumePage"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Replace">
    -<Stage Name="REPLACE" DisplayName="Replace, in full OS">
    <PageRef Page="WelcomePageReplace"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="RebootPage"/>
    </Stage>
    -<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
    <PageRef Page="UserCapturePageOldPC"/>
    <PageRef Page="ProgressPage"/>
    <PageRef Page="RebootAfterCapture"/>
    </Stage>
    </StageGroup>
    </StageGroups>
    </Wizard>

    I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

  • USMT data migration

    Id there a way to customize the USMT step to only capture and restore user data and not custom Windows settings?

    Yes.  USMT comes with three default .xml files which are used to determine which data is migrated.  These files are Config.xml, MigApp.xml and MigUser.xml.  Each file has a particular set of rules that determines what file types and folders
    are backed-up and restored.  It sounds like you don't need any of the data from the first two, and only want the data from MigUser.xml. You can also modify each of these files to suit your specific needs. 
    In your scanstate command line, you should specify to only include the xml file you want to use such as: scanstate /i:miguser.xml /v:13
    more explanation of the usmt xml files:http://technet.microsoft.com/en-us/library/ff383238(v=WS.10).aspx#BKMK_MigUser

  • KeyboardLocale and SystemLocale during UDI Wizard (MDT 2013)

    Hi
    We're using SCCM 2012 R2 integrated with MDT 2013
    we deploy Windows 7 with Task Sequence process with UDI Wizard
    we have 2 main problems regarding the Language Settings
    1. in the wizard we define UserLocale, KeyboardLocale and UILanguage, OSDTimeZone
    what about SystemLocale ? which is very basic to set, but there is no built-in combobox for it.
    the only workaround I can come up with is to build a custom page with that setting but it is hard to create a combobox with all the available languages, even when editing the XML directly and not via the UI.
    2. if I set the KeyboardLocale to Hebrew for example in the Wizard, the SMS environment variable is set to 0409:0000040d
    this causes the deployment to end with Hebrew installed with US keyboard layout. which is wrong! 
    I expect the value to be 040d:0000040d (Hebrew keyboard with Hebrew layout)
    which brings me to another question... how can I define multi keyboards? because my actual goal is to have English as my default keyboard language and to have Hebrew as a secondary keyboard.
    it is not Hebrew in particular. we deploy Windows in 20 different sites worldwide and English should be always be the default language and we want to add another local additional language
    I added a script that modifies the keyboardlocale and converts it from 0409:00000### to 0409:00000409;0###:00000###, but I feel like it is too much for this little setting that should be so basic...
    any help will be appreciated. thanks
    Tamir Levy

    Hi,
    Here is video for your reference.
    Configuring MDT 2012 UDI Replace Computer Scenario
    http://technet.microsoft.com/en-us/video/configuring-mdt-2012-udi-replace-computer-scenario
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • I lost my MacBook calendar when I performed the action required by 5 May although I have all information on my iPhone and iPad. How do I restore the data on my iCal calendar?

    I have performed all the relevant actions required before 5 May to conform with Apple instructions. I have lost my calendar on my MacBook although all is still OK on my iPhone and iPad. I have tried various ways to restore the data including going to MobileMe but I have been unsuccessful. I have tried to merge the information from my iPhone but this did not work either. My Contacts and mail are all OK. Coincidentally I am also unable to access my external hard drive which is working in itself (it is warm and whirrs when activated) but my back ups are failing. Any ideas out there?

    Hi bsavino2,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes Store: Changing account information
    http://support.apple.com/kb/HT1918
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Cheers,
    - Judy

  • How can i restore my data synchronised from a serv...

    I use Nokia C3-00, And in My country synchronisation with server is not available except i perform phone switch or with a PC...But in thesame country of mine there is a server people use to synchronise...And when i tried it on my phone with the settings given to me...I synchronised my contacts,notes and calender...and the phone said 'synchonisation sucessfull' but after i restored my phone coz it had an error..and restoring it deleted my data(contacts,notes etc)...Now my question is, how can i restore my data(contacts,notes) that i synchronised ? Coz i checked d phone...i did not see an option to restore d data.....And if i can't, i'm sorry but nokia put that 'sync with server' feature just for fun ...

    TSNA - My system crashed 1/2 way through opening up Parallels.  I use Parallels for Quicken & Quickbooks only.  My system locked up & I had to power down to get any response on the screen.  When it started back up I got a screen that said Restore from Time Machine, Safe Startup (or some such words) and one other choice.  NONE of which would do anything. - No response to any clicking, entering, up down etc.  I called over my Apple friend and he could not get it going,.  Ended up having to Reload O/S from the startup disks and reformat my hard drive.  Reformatted because I wanted to get rid of Parallels which has painfully slowed down my entire system.  I never keep it open unless I am working with Quickbooks or Quicken.  Therefore I had decided to start using Boot Camp anyway.  So I would have had to reformat my hard drive to do that regardless of this freeze up of my system.
    This whole thing has taken days to get my documents off Time Capsule.  Time Machine would then not restore to my "new" or reformatted hard drive, so all the files on the Time Capsule were hidden.  Total nightmare !
    Because now I can't get iPhoto APP back on my system as it is not available and have to use the new PHOTO which I hear is not good.

  • Time Machine restored wrong data

    OK - the history here is the previous Macbook was replaced because of system problems, including many files with FUTURE dates (eg. 2037). Apple store agreed after repeated issues, they would replace the machine. We did a final time machine/capsule backup before taking it in.
    Got the new Macbook and ran the Migration assistant to restore all data from the time capsule.
    The data was not correct, and I suspect it was something to do with the future dates.
    I can open the sparse bundle backup file and see the correct backup information, but I have no option when I open Time Machine to pick ANY previous backups.
    This all started with Macbook problem, and I'm really thinking they should figure this out - but assuming they wont, I'm looking for suggestions on how to safely get the 'real' information recovered from Time Capsule.
    Thanks
    Dan
    PS - OS X Lion on both systems - Macbook Pro 15" i7, 750GB

    JDHam wrote:
    Got the new Macbook and ran the Migration assistant to restore all data from the time capsule.
    The data was not correct, and I suspect it was something to do with the future dates.
    Possibly.  Migration Assistant uses the most recent backup, so if the dates were wrong, you may have gotten the wrong data.
    You should be able to see the other backups -- but you may need to start from a different user account (Migration Assistant creates a new account, and the transferred account may not have permission to the backups.  See Problems after using Migration Assistant for an explanation.
    A better option may be to do a full system restore, from a different backup.  See Time Machine - Frequently Asked Question #14 for detailed instructions.  You'll want to pick a backup from before the dates went wrong.

  • Text Replacement in scanned page question

    I must be doing something incredibly wrong because I cannot get text to be replaced in a scanned OCR document. I am using Acrobat Pro 9.
    Before getting to that, let me ask this question: If I am scanning a document created using a readily available font like Times New Roman, why does Acrobat even bother using the scanned page for displaying text? It knows the text, the OCR was 100% accurate. Why not replace the 300 dpi scanned bitmap image with real, vector-based text? I don't understand that.
    OK, now to just trying to replace what amounts to fuzzy looking text with vector text. I've read how to replace text using Tools-> Advanced Editing-> TouchUp Text Tool where I select text, right click on it, go to properties and change the text. Here's what happens when I do that:
    First off, the defaults in the properties dialog are set to no fill and no stroke. Why is that? If you're changing your font, wouldn't you want it to show?
    After making a selection and closing the dialog, the text indeed changes, but the original, fuzzy text is there as well. And, as there are slight differences in font size, the page is virtually unreadable as it has the appearance of being printed twice with different alignments each time.
    This is, of course, quite useless. I MUST be doing something wrong.
    Of course, taking even this course of action is pretty frustrating, as the document I'm working on has many statements in bold, so doing a global font change isn't even practical. I really just wish acrobat would know that it can display vector text from the get-go, and forego the bitmapped text altogether.
    Thanks, I hope my frustration isn't too evident!
    Graham

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 10:01:23 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text Replacement in scanned page question
    I must be doing something incredibly wrong because I cannot get text to be replaced in a scanned OCR document. I am using Acrobat Pro 9.
    Before getting to that, let me ask this question: If I am scanning a document created using a readily available font like Times New Roman, why does Acrobat even bother using the scanned page for displaying text? It knows the text, the OCR was 100% accurate. Why not replace the 300 dpi scanned bitmap image with real, vector-based text? I don't understand that.
    OK, now to just trying to replace what amounts to fuzzy looking text with vector text. I've read how to replace text using Tools-> Advanced Editing-> TouchUp Text Tool where I select text, right click on it, go to properties and change the text. Here's what happens when I do that:
    1. First off, the defaults in the properties dialog are set to no fill and no stroke. Why is that? If you're changing your font, wouldn't you want it to show?
    2. After making a selection and closing the dialog, the text indeed changes, but the original, fuzzy text is there as well. It is as if there is a bitmapped image sitting behind my new, pristine text.
    This is, of course, quite useless. I MUST be doing something wrong.
    Of course, taking even this course of action is pretty frustrating, as the document I'm working on has many statements in bold, so doing a global font change isn't even practical. I really just wish acrobat would know that it can display vector text from the get-go, and forego the bitmapped text altogether.
    Thanks, I hope my frustration isn't too evident!
    Graham
    >

  • RESTORE - Kernel   Bad page - header and trailer not matching

    Hello,
    I have a Problem with the recover of my backup.
    When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
    2008-11-26 21:20:38                               --- Starting GMT 2008-11-26 20:20:38           7.5.0    Build 032-123-111-699
    2008-11-26 21:26:57      0xE0C ERR 20005 Kernel   Bad page - header and trailer not matching
    2008-11-26 21:26:57      0xE0C ERR 20006 Kernel   Header [ 5277032 - data - tab - checksumData - empty ]
    2008-11-26 21:26:57      0xE0C ERR 20007 Kernel   Trailer[ 0 - data - nil - chckNil - empty ]
    2008-11-26 21:26:57      0xE0C ERR 52015 RESTORE  write/check count mismatch 5277032
    2008-11-26 21:26:57      0xDFC ERR 52012 RESTORE  error occured, basis_err 300
    2008-11-26 21:26:57      0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
    any Help ?
    thanks a lot
    Steven

    Hi Steven,
    the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
    The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
    Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
    To get closer to the reason where the problem is located I need to have some more information.
    1. You did the restore several times?
    2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
    3. Did you do your backup on tape?
    4. Did you try to create a backup into a file?
    5. Does the restore from file got the error as well?
    Regards, Christiane Hienger

  • I have used the easy transfer wizard to export/import data incl TB, do I now move all the Mbox folders between profiles to move the mail contents?

    I installed TB on the win8.1 box and have run the easy transfer wizard to import my data. The support item showing how to mark up my TB data for inclusion in the easy transfer wizard was very useful for this, but it does not describe how to get TB to recognise the imported profile.
    I can see two profiles in the folder: C:\Users\Andrew\AppData\Roaming\Thunderbird\Profiles
    and one appears to contain my old data, the files in the other profile are very small by comparison.
    My question is whether I should move (or copy) the mail folders (or all folders/files) from the imported profile to the new one, overwriting any files where relevant? Alternatively, is there a way to get TB to recognise and use the imported profile?
    I did look at the profile manager but it does not recognise the imported profile.
    Thanks in advance for any assistance.
    Andrew

    I decided to do the following:
    1. renamed the profile folder created after installation of Thunderbird, to a name like nnnnn.default.bak
    2. renamed the imported profile folder to the recently created profile nnnnn.default.
    3. Restarted TB.
    All working fine. All my email for the three email addresses has been transferred from the old computer to the new.

Maybe you are looking for