UDI Wizard or MDT Database for software distribution during (post) OSD

I am in the process of standing up our System Center 2012 R2 environment.  We will be migrating our SCCM 2007 over to 2012 R2.  WE currently have MDT installed but have never set up the database.  I was wondering if this would be a good time
to set up the DB and use it to create user and machine profiles for software installed as part of the imaging process, or continue to use UDI for that.
Any and all comments are welcome.  Thanks.

Hi,
If you want to perform mass deployments like this and customize what drivers, features or applications are installed according to the computer's hardware, location or role, you can accomplish this with MDT by using the MDT database. The MDT database is basically
a Microsoft SQL Server-based version of the CustomSettings.ini file that can be used as a central repository for storing the configuration settings used to deploy multiple computers using MDT. Without the MDT database, you would need to create a separate CustomSettings.ini
file for each computer.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Checking for business area during posting

    I need to check for business area balancing during posting of documents.
    Eg: if we receive bank interest income for a bank account from a business area Y then the entries should be credited into same business area Y
    Dr Bank - Y
    Cr Interest income - X
    this should not occur
    user wants to have an error message if the entries doest balance the business area while posting a document
    can any one plz tell me how this can be done?(does fi validations help in this?)

    Hi all
       Can any one help me solve this...
    we have several business areas but use only one 'bank interest received' GL account. So when posting the entries it should check for the business area in this gl acccount with the BA in the customer(bank ) acc.
      I tried to create validation at document level but it is not giving the message..
    thnx
    sravanthi

  • Understanding background work for software distribution in SCCM 2012

    Hi Team,
    1.I want to know site to site communication for SCCM 2012.. and
    2. want to know about package transfer to secondary site or content share background process.
    3. In many of the content share server 200 package out of this 90 still showing inprogress.. I checked distribution point but no error.. I checked conponent status " saying xxx001 package processed.
    Can some one answer this three question?

    Hi,
    Configuration Manager uses file-based replication to transfer packages between sites in your hierarchy.
    Reference:http://technet.microsoft.com/en-us/library/gg712701.aspx#BKMK_File_based
    The blog below is talking about the Site to Site Communication in SCCM 2007, but it can help you understand the process of packages transfer to secondary site.
    Understanding Site to Site Communication in SMS/SCCM
    http://blogs.msdn.com/b/steverac/archive/2010/07/16/understanding-site-to-site-communication-in-sms-sccm.aspx
    You could check Distmgr.log and sender.log to get more information. It should take some time in order to transfer so many packages.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 software distribution not able to distribute content for chrome

    Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
    just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
    for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
    Thanks and best regards, -- KF

    Thanks, Narcoticoo!your advice is helpful!
    So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
    is for uninstallation? Can I create a  bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
    /silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
    Thanks!
    Thanks and best regards, -- KF

  • Application Installation Order in UDI Wizard

    I was wondering if there is a way to control the order of installation with applications that are installed using the UDI Wizard.  I have certain software that needs to be installed in a particular order because of dependencies.  I have them listed
    in the order that I want them installed in the UDI Wizard but when the task sequence is running the applications seem to jump all over the place when installing.  This causes a plug-in for Acrobat to not be there when the deployment is complete because
    it tries to install before Acrobat is installed.  Acrobat is listed before the plug-in in the configuration but installs after the fact.  In the application package for the plug-in, Acrobat is listed as a dependency.  
    The plug-in will install from the application catalog after the OS is deployed.  I just want to know if there is a way to make it install after Acrobat during the task sequence.

    Hi,
    Here is a blog for configuring Application Dependencies, although it’s for MDT 2010.
    Hope this will be helpful.
    http://myitforum.com/cs2/blogs/cnackers/archive/2010/07/05/mdt-2010-configmgr-udi-configuring-application-mappings-and-dependencies.aspx
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the
    accuracy of this third-party contact information.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • URL of Assigned policy for software deployment

    how to find the assigned policy url in sccm 2007 ( for software distribution)

    Have a look at CAS.log so that you will get some idea about where it's stuck and all ..
    Also, see the following guide this will help you surely http://blogs.technet.com/b/configmgrteam/archive/2010/01/14/troubleshooting-client-content-download-in-configuration-manager-2007.aspx
    Anoop C Nair -
    @anoopmannur :: MY Site:
     www.AnoopCNair.com ::
    FaceBook:
     ConfigMgr(SCCM) Page ::
    Linkedin:
     Linkedin<

  • I can´t rescan for software updates with wmic command

    Hi guys,
    I read in all the sites that to install all updates  I need to run a command, but when I try to scan for software updates both a OSD task as from a command line on a machine with installed client gives me an error: Modifier Verb is invalid. Anyone know
    why? Is there any requirement to launch this command?
    Command: WMIC /namespace:\\root\ccm path sms_client CALL TriggerSchedule "{00000000-0000-0000-0000-000000000113}"
    /NOINTERACTIVE
    Sccm 2012 SP1 with SQL Server 2012 and Windows Server 2012. All in spanish. Reference OS is Windows 7 x64.
    THX for all!!!

    Hi,
    Please review the link below, here is a useful article for you.
    Configuration Manager 2012: Offline Servicing for Operating System Images
    http://blogs.technet.com/b/inside_osd/archive/2011/04/18/configuration-manager-2012-offline-servicing-for-operating-system-images.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • KeyboardLocale and SystemLocale during UDI Wizard (MDT 2013)

    Hi
    We're using SCCM 2012 R2 integrated with MDT 2013
    we deploy Windows 7 with Task Sequence process with UDI Wizard
    we have 2 main problems regarding the Language Settings
    1. in the wizard we define UserLocale, KeyboardLocale and UILanguage, OSDTimeZone
    what about SystemLocale ? which is very basic to set, but there is no built-in combobox for it.
    the only workaround I can come up with is to build a custom page with that setting but it is hard to create a combobox with all the available languages, even when editing the XML directly and not via the UI.
    2. if I set the KeyboardLocale to Hebrew for example in the Wizard, the SMS environment variable is set to 0409:0000040d
    this causes the deployment to end with Hebrew installed with US keyboard layout. which is wrong! 
    I expect the value to be 040d:0000040d (Hebrew keyboard with Hebrew layout)
    which brings me to another question... how can I define multi keyboards? because my actual goal is to have English as my default keyboard language and to have Hebrew as a secondary keyboard.
    it is not Hebrew in particular. we deploy Windows in 20 different sites worldwide and English should be always be the default language and we want to add another local additional language
    I added a script that modifies the keyboardlocale and converts it from 0409:00000### to 0409:00000409;0###:00000###, but I feel like it is too much for this little setting that should be so basic...
    any help will be appreciated. thanks
    Tamir Levy

    Hi,
    Here is video for your reference.
    Configuring MDT 2012 UDI Replace Computer Scenario
    http://technet.microsoft.com/en-us/video/configuring-mdt-2012-udi-replace-computer-scenario
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Possible to use the UDI Wizard for standalone USMT Online Restore?

    I'm looking for a solution for a specific scenario.  We are looking to use UDI for a replace scenario where we will use a UDI task sequence to backup USMT data to a USB drive on the old PC and turn around and restore that data on a new PC already
    provisioned and configured computer.  
    My goal is use UDI task sequences but it appears that out of the box UDI task sequences only allow for restoration of user data during a standard replace Operating System Deployment task sequence and not a stand alone USMT restore data only task sequence.
    Any ideas if this is possible to create a UDI driven USMT restore data only task sequence?
    MDT 2012 Update 1
    SCCM 2012 SP1

    Hi,
    Please try the steps below to see if it helps:
    1. Uninstall-WindowsFeature -Name desktop-experience -Remove
    2. Mount-WindowsImage -path c:\mount\ -Index 4 -ImagePath D:\sources\install.wim –ReadOnly
    3. Add-WindowsFeature -Name desktop-experience -Source C:\mount\Windows\WinSxS
    4. Install-WindowsFeature –name desktop-experience
    It seems that the components needed to add the Desktop Experience feature back to the build are located in the SXS (side by side) folder of the install media and can be re-added using the DISM tool.
    Please can you try with the following command and let me know if this resolves the issue in your environment 
    - dism /online /enable-feature /featurename:desktopexperience /source:D:\sources\sxs /limitaccess
    You could also refer to the thread below to troubleshoot the issue:
    Can't Install Desktop Experience on Server 2012 - Sources problem
    http://social.technet.microsoft.com/Forums/cs-CZ/737c3070-f651-494a-bc88-d60731616055/cant-install-desktop-experience-on-server-2012-sources-problem?forum=winserver8gen
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Are there any costs for an adobe reader software distribution license ?

    Are there any costs for an adobe reader software distribution license ?

    No (except for the costs of having your legal team check the license). You do need to read the license carefully, you are making specific commitments and there are specific restrictions.

  • Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

    Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

    The new Business Volume Purchase Program is pretty interesting...it can be used to centrally purchase and distribute paid ( not free) items from the AppStore.  We are getting setup to use it.  You can keep an eye on licenses etc.  You can also use a single centralized form of payment. 
    http://www.apple.com/business/vpp/

  • Link broken for Adobe Reader and Runtime Software Distribution License Agreement download...

    The link provided as part of the Adobe Reader and Runtime Software Distribution License Agreement, for downloading the PKG to mass-deploy Adobe Flash Player to my users (so I can update their machines to protect against yet another Flash exploit) keeps redirecting to typekit.com.
    How do I go about getting the latest PKG so I can deploy the fix?

    Can you try clearing your cache?  This was indeed a problem earlier today (sorry!) but should be corrected now.
    Thanks,
    Chris

  • What software can I use on my new Mac that no longer supports "AppleWorks"? To easily transfer my database for mailmerge.

    What software can I use on my new Mac that no longer supports "AppleWorks"? To easily transfer my database for mailmerge.

    Two thoughts:
    (1)     It is possible that your Adobe software was the result of belonging to a now-discontinued Adobe Print Service Provider program where for a certain annual membership fee, print service providers were provided with (a) both a Windows and Macintosh license to the Adobe print-oriented software products (such as InDesign, Illustrator, Photoshop, and Acrobat) and (b) special direct product support as well as the ability to put your name on Adobe's website as a member of this program. The program ended over a year ago if I remember correctly.
    (2)     You may wish to contact Adobe Customer Support (not Technical Support) and see if they can track down any and all licenses associated with your company. If you have the names of the former employees who worked with this software, it would be helpful. Likewise, if you were a member of the discontinued Adobe Print Service Provider program, you may have some options for upgrading/updating the software you have.
    Unfortunately, you cannot get any more definitive information about your situation on these forums.
    Good luck.
              - Dov

  • Using MDT 2013 for deploying Software from MDT Server to PC Client automatically and silently ?

    I have a trouble about deploying software from MDT 2013 server to PC Client , Can we using MDT 2013 for deploying software automatically and silently , that Users/Clients don't have to click "next,next" to install software ?
    If you have a solutions to deploying it , please share me about that solutions ?
    Thanks.
     

    you can make software silently with boot opción:
    with chocolatey opensource.
    or make software with switches
    here link to help you:
    http://blogs.itpro.es/octaviordz/2014/05/29/instalando-aplicaciones-con-chocolatey
    http://blogs.itpro.es/octaviordz/2014/06/05/integrando-chocolatey-a-mdt-2013-e-instalando-aplicaciones-de-forma-desatendida-en-windows-8-1/
    http://blogs.itpro.es/octaviordz/2014/10/31/probando-chocolatey-en-windows-10
    http://blogs.itpro.es/octaviordz/2012/07/10/aplicaciones-desatendidas
    MVP Jesús Octavio Rdz http://blogs.itpro.es/octaviordz

  • UDI wizard is not applying TimeZone setting (MDT2013)

    Hi All,
    I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
    I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
    setting in image.
    Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image? 
    I have attached the below UDI wizard XML. please answer and ask if you require any more details..
    <?xml version="1.0" encoding="UTF-8"?>
    -<Wizard>
    -<DLLs>
    <DLL Name="OSDRefreshWizard.dll"/>
    <DLL Name="SharedPages.dll"/>
    </DLLs>
    -<Style>
    <Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
    <Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
    </Style>
    -<Pages>
    -<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
    <ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
    <ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
    <Setter Property="BitmapFilename">images\USB.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
    <Error Type="-1" Text="The path not found" Value="2" State="Error"/>
    <Error Type="-1" Text="The file not found" Value="3" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
    <Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
    <ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
    <ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
    <ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
    <ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
    -<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
    <Setter Property="filename">%windir%\system32\cscript.exe</Setter>
    <Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
    <Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
    <Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
    <Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
    <Setter Property="BitmapFilename"/>
    -<ExitCodes>
    <ExitCode Type="0" Text="Success" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
    <Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
    <Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
    <ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
    <ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
    <ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
    <ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
    -<Fields>
    -<Field Name="WelcomeText" Summary="" Enabled="true">
    <Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
    -<Fields>
    <Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
    -<Field Name="Volume" Summary="Volume:" Enabled="true">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">There are no volumes available for installing the OS.</Setter>
    </Validator>
    </Field>
    <Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
    <Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
    </Fields>
    <Setter Property="MinimumVolumeSize">10</Setter>
    <Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
    <Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
    <Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
    <Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
    -<Data Name="ImageSelection">
    -<DataItem>
    <Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
    <Setter Property="Index">1</Setter>
    <Setter Property="Architecture">x86</Setter>
    <Setter Property="ImageName">Windows 7 RTM Images</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="true" VarName=""/>
    <Field Name="LocalRadio" Enabled="true" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Restore</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
    -<Fields>
    -<RadioGroup Name="DomainGroup" Locked="false">
    <Default>Workgroup</Default>
    </RadioGroup>
    -<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
    <Setter Property="NamedPattern">ComputerName</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
    <Setter Property="InvalidChars"/>
    </Validator>
    </Field>
    -<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You must select a domain.</Setter>
    </Validator>
    </Field>
    <Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
    -<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
    <Setter Property="NamedPattern">Workgroup</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    <Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
    <Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
    <Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
    <Data Name="Domain"/>
    </Page>
    -<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
    -<Fields>
    -<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
    <Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
    <Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
    <Default/>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    </Fields>
    </Page>
    -<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
    -<Fields>
    -<Field Name="DeviceAfinity" Summary="" Enabled="true">
    <Default>false</Default>
    </Field>
    -<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
    <Default>%OSDJoinAccount%</Default>
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    <Field Name="Password" Enabled="true"/>
    </Fields>
    </Page>
    -<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
    -<Fields>
    -<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
    <Default>DE-DE</Default>
    </Field>
    -<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
    <Default>en-US</Default>
    </Field>
    -<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
    <Default>00000409</Default>
    </Field>
    -<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
    <Default>Pacific Standard Time</Default>
    </Field>
    </Fields>
    -<Data Name="LanguagePacks">
    -<DataItem>
    <Setter Property="DisplayName">English (United States)</Setter>
    <Setter Property="Language">EN-US</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
    <Setter Property="Language">ZH-HK</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German (Germany)</Setter>
    <Setter Property="Language">DE-DE</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese (Japan)</Setter>
    <Setter Property="Language">JA-JP</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Polish (Poland)</Setter>
    <Setter Property="Language">PL-PL</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Romanian (Romania)</Setter>
    <Setter Property="Language">RO-RO</Setter>
    </DataItem>
    </Data>
    </Page>
    -<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
    <Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
    <Setter Property="TsAppBaseVariable">PACKAGES</Setter>
    <Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
    <Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
    <Setter Property="TsAppInstall">AppInstall</Setter>
    </Page>
    <Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
    -<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
    -<Fields>
    <RadioGroup Name="LocationGroup" Locked="false"/>
    -<Field Name="TargetDrive" Enabled="true" VarName="">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
    </Validator>
    </Field>
    -<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">No valid network share.</Setter>
    </Validator>
    </Field>
    -<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
    <Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
    </Validator>
    </Field>
    -<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">Password is required. Please enter the password.</Setter>
    </Validator>
    </Field>
    <Field Name="NoDataRadio" Enabled="false" VarName=""/>
    <Field Name="LocalRadio" Enabled="false" VarName=""/>
    <Field Name="USBRadio" Enabled="true" VarName=""/>
    <Field Name="NetworkRadio" Enabled="true" VarName=""/>
    </Fields>
    <Setter Property="NetworkPassword"/>
    <Setter Property="NetworkUsername"/>
    <Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
    <Setter Property="Format">disable</Setter>
    <Setter Property="FormatPrompt">disable</Setter>
    <Setter Property="MinimumDriveSize">10</Setter>
    <Setter Property="State">Capture</Setter>
    <Setter Property="NetworkDrive">n:</Setter>
    <Data Name="Network"/>
    </Page>
    -<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
    <Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
    -<Tasks StatusTitle="Status" NameTitle="Task Name">
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
    <Setter Property="BitmapFilename">images\Printers.ico</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
    <File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
    <Setter Property="BitmapFilename">images\copy.bmp</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
    <Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    -<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
    <Setter Property="BitmapFilename">images\usmt.bmp</Setter>
    <Setter Property="filename">%windir%\system32\wscript.exe</Setter>
    <Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
    -<ExitCodes>
    <ExitCode Type="0" Text="" Value="0" State="Success"/>
    <ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
    </ExitCodes>
    </Task>
    </Tasks>
    </Page>
    -<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
    -<Fields>
    -<Field Name="RebootText" Summary="" Enabled="true">
    <Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
    </Field>
    </Fields>
    </Page>
    -<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
    -<Fields>
    <!-- Valid values: TPM,TPMPIN,TPMKey and ExternalKey-->
    -<RadioGroup Name="BitLockerRadioGroup" Locked="false">
    <Default>TPMPIN</Default>
    </RadioGroup>
    -<RadioGroup Name="LocationGroup" Locked="false">
    <Default>AD</Default>
    </RadioGroup>
    -<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
    <Default>True</Default>
    </Field>
    -<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
    -<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
    <Setter Property="Message">The PIN must not be emtpy</Setter>
    </Validator>
    -<Validator Type="Microsoft.Wizard.Validation.RegEx">
    <Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
    <Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
    </Validator>
    </Field>
    -<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
    <Default>True</Default>
    </Field>
    </Fields>
    <Setter Property="KeyLocation"/>
    </Page>
    -<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
    -<Fields>
    -<Field Name="label3" Summary="" Enabled="true" VarName="">
    <Default>Choose Language Type</Default>
    </Field>
    -<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
    <Default>radiobutton1</Default>
    </RadioGroup>
    -<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
    <Default>English</Default>
    </Field>
    </Fields>
    -<Data Name="CustomFields">
    -<DataItem>
    <Setter Property="ControlType">label</Setter>
    <Setter Property="ID">3</Setter>
    <Setter Property="X">37.27</Setter>
    <Setter Property="Y">3.67</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">label3</Setter>
    <Setter Property="Label">Choose Language Type</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="ControlType">combo</Setter>
    <Setter Property="ID">5</Setter>
    <Setter Property="X">36.87</Setter>
    <Setter Property="Y">21.25</Setter>
    <Setter Property="Width">100</Setter>
    <Setter Property="Height">12</Setter>
    <Setter Property="Name">combo5</Setter>
    </DataItem>
    </Data>
    -<Data Name="combo5">
    -<DataItem>
    <Setter Property="DisplayName">English</Setter>
    <Setter Property="Value">0</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Chinese</Setter>
    <Setter Property="Value">1</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Japanese</Setter>
    <Setter Property="Value">2</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">German</Setter>
    <Setter Property="Value">3</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-2</Setter>
    <Setter Property="Value">4</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-3</Setter>
    <Setter Property="Value">5</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-4</Setter>
    <Setter Property="Value">6</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-5</Setter>
    <Setter Property="Value">7</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-6</Setter>
    <Setter Property="Value">8</Setter>
    </DataItem>
    -<DataItem>
    <Setter Property="DisplayName">Lang-7</Setter>
    <Setter Property="Value">9</Setter>
    </DataItem>
    </Data>
    </Page>
    </Pages>
    -<StageGroups>
    -<StageGroup DisplayName="New Computer">
    -<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    -<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="BitLocker"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanBareMetal"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="UDAPage"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Refresh">
    -<Stage Name="REFRESH" DisplayName="Refresh">
    <PageRef Page="WelcomePage"/>
    <PageRef Page="VolumePage"/>
    <PageRef Page="UserRestorePage"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="ComputerPage"/>
    <PageRef Page="AdminAccounts"/>
    <PageRef Page="LanguagePage"/>
    <PageRef Page="ApplicationPage"/>
    <PageRef Page="SummaryPage"/>
    </Stage>
    </StageGroup>
    -<StageGroup DisplayName="Replace">
    -<Stage Name="REPLACE" DisplayName="Replace, in full OS">
    <PageRef Page="WelcomePageReplace"/>
    <PageRef Page="ConfigScanPage"/>
    <PageRef Page="RebootPage"/>
    </Stage>
    -<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
    <PageRef Page="UserCapturePageOldPC"/>
    <PageRef Page="ProgressPage"/>
    <PageRef Page="RebootAfterCapture"/>
    </Stage>
    </StageGroup>
    </StageGroups>
    </Wizard>

    I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

Maybe you are looking for

  • How to use my own tag in XMP

    I have translated HTML to PDF. It is working properly if I use only DC Metadata. But if I write other tag in XMP and load this file in PDF, I cannot see right information. I want to use my own tag such as "co-author" and "related paper". I define thi

  • Problem with screen

    There is strange spots at edges of screen. I using this tablet third month and doesn't even drop or hit it! Sometimes touch screen don't work. And plus creaking backplate. I can understand, if this was with chinese toy for $100, but it is "premium" d

  • Material Has wrong product hierarchy when entered in sales Order VA01

    Hi, Material -1300  - has a wrong product hierarchy. If you search for product hierarchy via Tcode mm03 - basic data1 you will find the following hierarchy: 00P4SU000D8400600H However if you enter an order with Tcode va01, enter Material 1300  - in t

  • ERP INTEGRATOR and FDM

    Hi All We have new  requirement our Source is PeopleSoft from that we want to load data to essbase and planning  using ERP Integrator Previously we use to get text files from Peoplesoft and we use to load it FDM  to Planing & Essbase What are prerequ

  • Locking and Unlocking HR Infotype records

    Hi ,      Is there is any Function Module / Report to lock and unlock  infotype record ? Please suggest me if any wayout is available.. Regards, Vijay