Udisks doesn't recognise NTFS disks

After updating udisks my NTFS USB and external disk wasn't recognised. I got an error: the filesystem isn't in /etc/filesystems or /proc/filesystems.
I've reverted back to non-testing version my USB and external disk were recognised again.

It might be a KDE problem. I'm not shure.
This workaround (that was posted on Arch Flyspray) fixed the problem:
# cp /proc/filesystems /etc
# vi /etc/filesystems
Then you just add:
vfat and ntfs, without noproc in front
If anyone else is interested.

Similar Messages

  • Burning DL, doesn't recognise the disk?

    Morning
    I was just starting a disk off this morning, before I went to work, and it's 6.6GBs. I have a DL burner, and I bought a Verbatim DL disk yesterday. I put the disk in my drive and pressed "Burn Disk". What happened!
    The iDVD programme said that my project was too big for a single-layer disk and I should put in a dual-layer disk. Obviously, the only option is to eject.
    Any answers?
    I am proceeding to burn a disk image, which isn't recommended, but what else can I do?
    Thanks in advance

    Found the answer.
    My drive doesn't support DVD-R DL.
    Silly really!
    Thanks anyway

  • Disk is jambed in computer an the computer doesn't recognise the disk is there, how do you remove it?

    anyone know how to remove disks from a macbook that does not recognise there being anything inside it?

    Hi
    Can be a dangerous operation !
    But I would start by
    • Closing the MacBook - turn all OFF
    • Start it up - BUT KEEP MOUSE KEY or equivalent DOWN DURING FULL UP-START.
    If DVD is in an OK position - it will be ejected.
    If stuck in an out of line way - then I would go to an Apple Store and get proper help - not to harm the DVD-player.
    Yours Bengt w

  • Migration Assistant doesn't recognise external disk where my TM back up is.

    I have made a clean instalation on my Imac, In order to instal Mountain Lion. Mi machine its working now on OS 10.8.2. The problem is that when i run the Migration Assistant it only show the actual HD disk and doesn´t show the external drive where mi back up are. So i can´t migrate ALL my information to the new enviroment.
    I want to recover all my stuff, aplications, paswords, files, etc. created originaly on Snow Leopard and use it in Mountain Lion.
    Thanks.

    You do realize that by doing that you restored your OS X 10.6 installation as it was before you upgraded, in essence undoing your operating system upgrade. You originallly requested to "migrate" your data and applications to your new clean installation of OS X Mountain Lion which wasnt working, so restoring from a backup defeats the purpose of having upgraded.
    However, at this point you can download and install the Mountain Lion upgrade again over your restored system to get Mountain Lion running, but by doing this you will not have done a "clean" install.

  • Replacement HDD doesn't recognise hard disk

    Hi,
    I am rebuilding my laptop to give to a local charity and have wiped the hdd, however, when I come to re-install Windows it fails reading the boot DVD and then falls through the boot sequence to the network boot and errors with PXE E61 (not the cause here).
    I have checked the windows DVD in another machine and it boots fine, and have checked various other bootable DVDs I have kicking about which are known to work, Windows and Linux, but the same issue.
    The hdd is recognised in the BIOS.
    I am wondering if there is a special driver required to boot from a DVD that I may need to slipsteam into my disk image. Alternatively, do Toshiba provide a DVD, preferably I don't want to pay a lot for this as I am donating the laptop to a charity, but I also don't want to just bin the laptop as it still works fine for internet, excel and word processing etc.
    Any thoughts appreciated please - I hope from what I've written that it's clear that I am an experienced PC user/builder, but appreciate that I may have missed something. Laptop details:
    Toshiba Satellite A200-1VG
    Model : PSAE3E-045018EN
    Serial Number : XXXXXXXXX
    Thanks in advance.
    **UPDATE**
    I got thinking that perhaps the issue was the DVD drive in the laptop, so decided to try LAN (PXE) boot and it works....so I just need to find a replacement DVD Rom for this laptop!
    [Moderator edit to remove serial number.]

    good thinking.  replacement cd drives are pretty cheap if you can find one for that model.  may have to source an external one but then I'm not sure how well that will work loading windows. 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • IMac doesn't recognise the internal hard disk (intermittent)

    Hi, I was wondering if anyone could give me an advice on this problem.
    Background: A few days ago my iMac (20-inch MA877LL) would not boot up, it would sit on the gray screen with the wheel spinning for ever. I thought the OS might have got corrupted so I tried to re-install Snow Leopard from the CD. Installation fails with a message like 'the content of HD can not be changed'. I then went to Disk Utilities trying to repair the disk but had no luck with the repair so I decided to format the disk. I managed to get into my hard disk using the cmd R key combination at power up and backed up my essential files onto a external hard disk. I formatted/erase the hard disk (zeroed out) and tried to reinstall the Snow Leopard again. The installation failed again. Rebooted the system again and tried to re instal again but this time I got as far as the 'select the disk where you want to install Mac OS' but my Hard Disk is not listed, it's a blank list! Rebooted the maching again, tried the installation, this time it sees the hard disk but the installation fails again.
    I have tried to change the boot source by hodling the 'alt' key down at power up, but I am only given the option of the CD drive with installation disk as the boot source i.e. no Har Disk. It appears that the Hard Disk is intermittently recognised and hence my problem with booting the maching when the problem started.
    I am happy to purchase an internal disk to replace the existing one, but I have a feeling the actual Disk it's OK, after all I managed to access my data to back up and then format it with no problem. I just think there's a problem somewhere that intemittently doesn't recognise the Hard Disk.
    Any suggestions will be much appreciated.

    You need to have the hard drive replaced. The one that is currently installed has failed.

  • My Macbook doesn't recognise the startup disk

    I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognise de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.

    If you erase a drive, then in order to install Lion or later you must first install Snow Leopard 10.6.8. You can install Snow Leopard using the installer discs that came with your computer when it was new. You can then update the version of Snow Leopard to 10.6.8 by downloading the combo updater.

  • [SOLVED] Arch doesn't recognise software RAID0

    Problem solved! See my last reply for the solution.
    Old post follows:
    I currently have Windows installed on a 2x500GB RAID0, with 300GB unallocated space for Arch.
    However, the Arch Live CD doesn't recognise the RAID0 for whatever reason. Or perhaps I've overlooked where it is on the system?
    Arch detects all of my disks and partitions fine, including the two individual 500GB HDDs (/dev/sdc and /dev/sdd) which make up the RAID0.
    Here's some information from a few commands I ran and dumped to a file:
    Disk /dev/sdc: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xe563da78
    Device Boot Start End Blocks Id System
    /dev/sdc1 2048 1323976703 661987328 7 HPFS/NTFS/exFAT
    Disk /dev/sdd: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Personalities : [raid0] [raid1] [raid10]
    unused devices: <none>
    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
    00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port A)
    00:11.0 RAID bus controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] (rev 40)
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
    00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 580] (rev a1)
    01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
    02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
    03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
    /dev/sdb1: LABEL="Neu Mann" UUID="4E2C18BB2C189FCF" TYPE="ntfs"
    /dev/sda1: UUID="2810A17A10A1501C" TYPE="ntfs"
    /dev/sda5: LABEL="kokoro" UUID="B8104FDA104F9E6E" TYPE="ntfs"
    /dev/sr0: LABEL="ARCH_201207" TYPE="iso9660"
    /dev/sdd: TYPE="promise_fasttrack_raid_member"
    /dev/loop0: TYPE="squashfs"
    /dev/loop1: UUID="54d19f93-f878-4a22-9c38-d58dd04ac8a9" TYPE="ext4"
    /dev/loop2: UUID="54d19f93-f878-4a22-9c38-d58dd04ac8a9" TYPE="ext4"
    /dev/loop3: TYPE="squashfs"
    /dev/loop4: UUID="b6be6cf8-15c1-49ee-94f7-8cc33882096e" TYPE="ext4"
    /dev/loop5: UUID="b6be6cf8-15c1-49ee-94f7-8cc33882096e" TYPE="ext4"
    /dev/loop6: TYPE="squashfs"
    /dev/loop7: UUID="42ed7453-0a1a-42c9-b0a6-0de03a3fdfd8" TYPE="ext4"
    /dev/mapper/arch_root-image: UUID="54d19f93-f878-4a22-9c38-d58dd04ac8a9" TYPE="ext4"
    /dev/mapper/arch_lib-modules: UUID="b6be6cf8-15c1-49ee-94f7-8cc33882096e" TYPE="ext4"
    /dev/loop8: UUID="42ed7453-0a1a-42c9-b0a6-0de03a3fdfd8" TYPE="ext4"
    /dev/mapper/arch_usr-share: UUID="42ed7453-0a1a-42c9-b0a6-0de03a3fdfd8" TYPE="ext4"
    *** Set
    name : pdc_chceddecf
    size : 1953124864
    stride : 128
    type : stripe
    status : ok
    subsets: 0
    devs : 2
    spares : 0
    /dev/dm-2: 856064 total, "N/A"
    /dev/dm-1: 192512 total, "N/A"
    /dev/dm-0: 1382400 total, "N/A"
    /dev/sdd: 976773168 total, "WD-WMAYP1968098"
    /dev/sdc: 976773168 total, "WD-WMAYP1090982"
    /dev/sdb: 3907029168 total, "WD-WCAZA0751908"
    /dev/sda: 625142448 total, "VFA200R22ZHXRJ"
    dmesg, messages near the end were generated by me attempting to get the OS to recognise the RAID0:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 14:36:44 UTC 2012
    [ 0.000000] Command line: archisobasedir=arch archisolabel=ARCH_201207 initrd=boot/x86_64/archiso.img BOOT_IMAGE=boot/x86_64/vmlinuz
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000093000 (usable)
    [ 0.000000] BIOS-e820: 0000000000093000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dba0a000 (usable)
    [ 0.000000] BIOS-e820: 00000000dfa6a000 - 00000000dfa6d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfa6d000 - 00000000dfaf8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfaf8000 - 00000000dfafb000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfafb000 - 00000000dfafc000 (usable)
    [ 0.000000] BIOS-e820: 00000000dfafc000 - 00000000dfb03000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfb03000 - 00000000dfb4d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfb4d000 - 00000000dfb55000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfb55000 - 00000000dfb7e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfb7e000 - 00000000dfd81000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfd81000 - 00000000dff00000 (usable)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100093000 - 0000000420000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme3, BIOS P1.40 06/29/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x420000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-D8FFF write-protect
    [ 0.000000] D9000-EBFFF uncachable
    [ 0.000000] EC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
    [ 0.000000] 3 base 0000DFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000420000000 aka 16896M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd000] fd000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00dfe00000 page 2M
    [ 0.000000] 00dfe00000 - 00dff00000 page 4k
    [ 0.000000] kernel direct mapping tables up to dff00000 @ 1fffd000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000420000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 0420000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 420000000 @ dfefe000-dff00000
    [ 0.000000] RAMDISK: 7f1be000 - 7ffff000
    [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000dfafc068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000dfb01380 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
    [ 0.000000] ACPI: DSDT 00000000dfafc150 0522B (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000dfb4ff80 00040
    [ 0.000000] ACPI: APIC 00000000dfb01478 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000dfb01518 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: AAFT 00000000dfb01558 0003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000dfb01598 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 00000000dfb015d0 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000420000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000420000000
    [ 0.000000] NODE_DATA [000000041fffc000 - 000000041fffffff]
    [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00420000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x00000093
    [ 0.000000] 0: 0x00000100 -> 0x000dba0a
    [ 0.000000] 0: 0x000dfafb -> 0x000dfafc
    [ 0.000000] 0: 0x000dfd81 -> 0x000dff00
    [ 0.000000] 0: 0x00100093 -> 0x00420000
    [ 0.000000] On node 0 totalpages: 4176506
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3902 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 879562 pages, LIFO batch:31
    [ 0.000000] Normal zone: 51200 pages used for memmap
    [ 0.000000] Normal zone: 3225453 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec20000] gsi_base[24])
    [ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 72
    [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dba0a000 - 00000000dfa6a000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa6a000 - 00000000dfa6d000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa6d000 - 00000000dfaf8000
    [ 0.000000] PM: Registered nosave memory: 00000000dfaf8000 - 00000000dfafb000
    [ 0.000000] PM: Registered nosave memory: 00000000dfafc000 - 00000000dfb03000
    [ 0.000000] PM: Registered nosave memory: 00000000dfb03000 - 00000000dfb4d000
    [ 0.000000] PM: Registered nosave memory: 00000000dfb4d000 - 00000000dfb55000
    [ 0.000000] PM: Registered nosave memory: 00000000dfb55000 - 00000000dfb7e000
    [ 0.000000] PM: Registered nosave memory: 00000000dfb7e000 - 00000000dfd81000
    [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
    [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
    [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
    [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100093000
    [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:1ed00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041fc00000 s82880 r8192 d23616 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108917
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: archisobasedir=arch archisolabel=ARCH_201207 initrd=boot/x86_64/archiso.img BOOT_IMAGE=boot/x86_64/vmlinuz
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ 4130000000 size 32 MB
    [ 0.000000] Aperture beyond 4GB. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ d0000000
    [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000d4000000
    [ 0.000000] Memory: 16285596k/17301504k available (4538k kernel code, 595480k absent, 420428k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 3547.978 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7098.62 BogoMIPS (lpj=11826593)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000026] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000731] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.005101] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.007113] Mount-cache hash table entries: 256
    [ 0.007267] Initializing cgroup subsys cpuacct
    [ 0.007269] Initializing cgroup subsys memory
    [ 0.007277] Initializing cgroup subsys devices
    [ 0.007278] Initializing cgroup subsys freezer
    [ 0.007279] Initializing cgroup subsys net_cls
    [ 0.007281] Initializing cgroup subsys blkio
    [ 0.007300] tseg: 00dff00000
    [ 0.007302] CPU: Physical Processor ID: 0
    [ 0.007303] CPU: Processor Core ID: 0
    [ 0.007304] mce: CPU supports 6 MCE banks
    [ 0.007309] LVT offset 0 assigned for vector 0xf9
    [ 0.007313] using AMD E400 aware idle routine
    [ 0.007791] ACPI: Core revision 20120320
    [ 0.015073] ftrace: allocating 17820 entries in 70 pages
    [ 0.021336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054270] CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00
    [ 0.158266] Performance Events: AMD PMU driver.
    [ 0.158269] ... version: 0
    [ 0.158270] ... bit width: 48
    [ 0.158270] ... generic registers: 4
    [ 0.158271] ... value mask: 0000ffffffffffff
    [ 0.158272] ... max period: 00007fffffffffff
    [ 0.158273] ... fixed-purpose events: 0
    [ 0.158274] ... event mask: 000000000000000f
    [ 0.158299] System has AMD C1E enabled
    [ 0.158306] Switch to broadcast mode on CPU0
    [ 0.178422] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.198332] Booting Node 0, Processors #1
    [ 0.211445] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.211451] Switch to broadcast mode on CPU1
    [ 0.221660] #2
    [ 0.234770] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.234781] Switch to broadcast mode on CPU2
    [ 0.244919] #3
    [ 0.258028] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.258042] Switch to broadcast mode on CPU3
    [ 0.268211] #4
    [ 0.281321] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.281334] Switch to broadcast mode on CPU4
    [ 0.291515] #5
    [ 0.304626] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.304638] Switch to broadcast mode on CPU5
    [ 0.304673] Brought up 6 CPUs
    [ 0.304683] Total of 6 processors activated (42592.72 BogoMIPS).
    [ 0.311664] devtmpfs: initialized
    [ 0.313435] PM: Registering ACPI NVS region [mem 0xdfa6d000-0xdfaf7fff] (569344 bytes)
    [ 0.313442] PM: Registering ACPI NVS region [mem 0xdfafc000-0xdfb02fff] (28672 bytes)
    [ 0.313444] PM: Registering ACPI NVS region [mem 0xdfb4d000-0xdfb54fff] (32768 bytes)
    [ 0.313446] PM: Registering ACPI NVS region [mem 0xdfb7e000-0xdfd80fff] (2109440 bytes)
    [ 0.313901] NET: Registered protocol family 16
    [ 0.313971] node 0 link 0: io port [e000, ffff]
    [ 0.313973] TOM: 00000000e0000000 aka 3584M
    [ 0.313975] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    [ 0.313976] node 0 link 0: mmio [e0000000, fef0ffff] ==> [f0000000, fef0ffff]
    [ 0.313978] TOM2: 0000000420000000 aka 16896M
    [ 0.313980] bus: [00, 1f] on node 0 link 0
    [ 0.313981] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.313982] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
    [ 0.313983] bus: 00 index 2 [mem 0x420000000-0xfcffffffff]
    [ 0.314067] ACPI: bus type pci registered
    [ 0.314108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.314111] PCI: not using MMCONFIG
    [ 0.314112] PCI: Using configuration type 1 for base access
    [ 0.314113] PCI: Using configuration type 1 for extended access
    [ 0.314717] bio: create slab <bio-0> at 0
    [ 0.314765] ACPI: Added _OSI(Module Device)
    [ 0.314766] ACPI: Added _OSI(Processor Device)
    [ 0.314767] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.314769] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.315210] ACPI: EC: Look up EC in DSDT
    [ 0.315672] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.317213] ACPI: Interpreter enabled
    [ 0.317217] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.317234] ACPI: Using IOAPIC for interrupt routing
    [ 0.317334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.317359] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.338488] ACPI: No dock devices found.
    [ 0.338492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.338555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.338648] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.338649] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.338651] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.338652] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
    [ 0.338653] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffffffff]
    [ 0.338673] PCI host bridge to bus 0000:00
    [ 0.338675] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.338676] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.338677] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.338679] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
    [ 0.338680] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
    [ 0.338689] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
    [ 0.338736] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
    [ 0.338761] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.338774] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
    [ 0.338797] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.338811] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
    [ 0.338834] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.338854] pci 0000:00:11.0: [1002:4393] type 00 class 0x010400
    [ 0.338869] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
    [ 0.338877] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
    [ 0.338884] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
    [ 0.338891] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
    [ 0.338899] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
    [ 0.338906] pci 0000:00:11.0: reg 24: [mem 0xfe30b000-0xfe30b3ff]
    [ 0.338952] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.338962] pci 0000:00:12.0: reg 10: [mem 0xfe30a000-0xfe30afff]
    [ 0.339018] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.339033] pci 0000:00:12.2: reg 10: [mem 0xfe309000-0xfe3090ff]
    [ 0.339098] pci 0000:00:12.2: supports D1 D2
    [ 0.339099] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.339116] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.339126] pci 0000:00:13.0: reg 10: [mem 0xfe308000-0xfe308fff]
    [ 0.339183] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.339197] pci 0000:00:13.2: reg 10: [mem 0xfe307000-0xfe3070ff]
    [ 0.339262] pci 0000:00:13.2: supports D1 D2
    [ 0.339263] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.339281] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.339338] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.339348] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
    [ 0.339355] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
    [ 0.339363] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
    [ 0.339370] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
    [ 0.339377] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
    [ 0.339407] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.339423] pci 0000:00:14.2: reg 10: [mem 0xfe300000-0xfe303fff 64bit]
    [ 0.339475] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.339486] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.339546] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.339578] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.339588] pci 0000:00:14.5: reg 10: [mem 0xfe306000-0xfe306fff]
    [ 0.339641] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    [ 0.339652] pci 0000:00:16.0: reg 10: [mem 0xfe305000-0xfe305fff]
    [ 0.339708] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    [ 0.339722] pci 0000:00:16.2: reg 10: [mem 0xfe304000-0xfe3040ff]
    [ 0.339787] pci 0000:00:16.2: supports D1 D2
    [ 0.339788] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.339804] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.339815] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.339824] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.339833] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.339844] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.339881] pci 0000:01:00.0: [10de:1080] type 00 class 0x030000
    [ 0.339889] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [ 0.339897] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
    [ 0.339905] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
    [ 0.339910] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.339915] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
    [ 0.339959] pci 0000:01:00.1: [10de:0e09] type 00 class 0x040300
    [ 0.339966] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
    [ 0.344680] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.344692] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.344701] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
    [ 0.344710] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
    [ 0.344780] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
    [ 0.344805] pci 0000:02:00.0: reg 10: [mem 0xfe200000-0xfe207fff 64bit]
    [ 0.344890] pci 0000:02:00.0: supports D1 D2
    [ 0.344892] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.351338] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.351351] pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
    [ 0.351422] pci 0000:03:00.0: [14e4:16b1] type 00 class 0x020000
    [ 0.351450] pci 0000:03:00.0: reg 10: [mem 0xfa110000-0xfa11ffff 64bit pref]
    [ 0.351471] pci 0000:03:00.0: reg 18: [mem 0xfa100000-0xfa10ffff 64bit pref]
    [ 0.351504] pci 0000:03:00.0: reg 30: [mem 0xfe100000-0xfe1007ff pref]
    [ 0.351567] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.357977] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
    [ 0.357989] pci 0000:00:0a.0: bridge window [mem 0xfe100000-0xfe1fffff]
    [ 0.357998] pci 0000:00:0a.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
    [ 0.358075] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.358089] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.358095] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.358101] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.358107] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
    [ 0.358113] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
    [ 0.358139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.358305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
    [ 0.358321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
    [ 0.358337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
    [ 0.358363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.358397] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.358399] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.358400] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.360697] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
    [ 0.360732] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
    [ 0.360767] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
    [ 0.360802] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
    [ 0.360828] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
    [ 0.360846] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
    [ 0.360865] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
    [ 0.360884] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
    [ 0.360953] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.360955] vgaarb: loaded
    [ 0.360956] vgaarb: bridge control possible 0000:01:00.0
    [ 0.360983] PCI: Using ACPI for IRQ routing
    [ 0.367781] PCI: pci_cache_line_size set to 64 bytes
    [ 0.367833] reserve RAM buffer: 0000000000093000 - 000000000009ffff
    [ 0.367835] reserve RAM buffer: 00000000dba0a000 - 00000000dbffffff
    [ 0.367836] reserve RAM buffer: 00000000dfafc000 - 00000000dfffffff
    [ 0.367838] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
    [ 0.367938] NetLabel: Initializing
    [ 0.367940] NetLabel: domain hash size = 128
    [ 0.367940] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.367949] NetLabel: unlabeled traffic allowed by default
    [ 0.367961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.367963] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.370985] Switching to clocksource hpet
    [ 0.374470] pnp: PnP ACPI init
    [ 0.374479] ACPI: bus type pnp registered
    [ 0.374557] pnp 00:00: [bus 00-ff]
    [ 0.374561] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.374563] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.374567] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.374571] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.374572] pnp 00:00: [mem 0x000c8000-0x000dffff window]
    [ 0.374573] pnp 00:00: [mem 0xe0000000-0xffffffff window]
    [ 0.374574] pnp 00:00: [mem 0x00000000 window]
    [ 0.374603] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.374619] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.374647] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.374649] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.374771] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.374773] pnp 00:02: [mem 0xfec20000-0xfec200ff]
    [ 0.374794] system 00:02: [mem 0xfec20000-0xfec200ff] could not be reserved
    [ 0.374796] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.374819] pnp 00:03: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.374839] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.374945] pnp 00:04: [io 0x040b]
    [ 0.374946] pnp 00:04: [io 0x04d6]
    [ 0.374947] pnp 00:04: [io 0x0c00-0x0c01]
    [ 0.374948] pnp 00:04: [io 0x0c14]
    [ 0.374949] pnp 00:04: [io 0x0c50-0x0c51]
    [ 0.374950] pnp 00:04: [io 0x0c52]
    [ 0.374951] pnp 00:04: [io 0x0c6c]
    [ 0.374952] pnp 00:04: [io 0x0c6f]
    [ 0.374953] pnp 00:04: [io 0x0cd0-0x0cd1]
    [ 0.374954] pnp 00:04: [io 0x0cd2-0x0cd3]
    [ 0.374955] pnp 00:04: [io 0x0cd4-0x0cd5]
    [ 0.374956] pnp 00:04: [io 0x0cd6-0x0cd7]
    [ 0.374957] pnp 00:04: [io 0x0cd8-0x0cdf]
    [ 0.374957] pnp 00:04: [io 0x0800-0x089f]
    [ 0.374959] pnp 00:04: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.374960] pnp 00:04: [io 0x0000-0x000f]
    [ 0.374961] pnp 00:04: [io 0x0b20-0x0b3f]
    [ 0.374962] pnp 00:04: [io 0x0900-0x090f]
    [ 0.374963] pnp 00:04: [io 0x0910-0x091f]
    [ 0.374964] pnp 00:04: [io 0xfe00-0xfefe]
    [ 0.374965] pnp 00:04: [io 0x0060-0x005f disabled]
    [ 0.374966] pnp 00:04: [io 0x0064-0x0063 disabled]
    [ 0.374967] pnp 00:04: [mem 0xfec00000-0xfec00fff]
    [ 0.374968] pnp 00:04: [mem 0xfee00000-0xfee00fff]
    [ 0.374969] pnp 00:04: [mem 0xfed80000-0xfed8ffff]
    [ 0.374970] pnp 00:04: [mem 0xfed61000-0xfed70fff]
    [ 0.374971] pnp 00:04: [mem 0xfec10000-0xfec10fff]
    [ 0.374972] pnp 00:04: [mem 0xfed00000-0xfed00fff]
    [ 0.374973] pnp 00:04: [mem 0xffc00000-0xffffffff]
    [ 0.375010] system 00:04: [io 0x040b] has been reserved
    [ 0.375011] system 00:04: [io 0x04d6] has been reserved
    [ 0.375012] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.375014] system 00:04: [io 0x0c14] has been reserved
    [ 0.375015] system 00:04: [io 0x0c50-0x0c51] has been reserved
    [ 0.375016] system 00:04: [io 0x0c52] has been reserved
    [ 0.375017] system 00:04: [io 0x0c6c] has been reserved
    [ 0.375019] system 00:04: [io 0x0c6f] has been reserved
    [ 0.375020] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.375021] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.375022] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.375024] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.375025] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.375026] system 00:04: [io 0x0800-0x089f] has been reserved
    [ 0.375028] system 00:04: [io 0x0b20-0x0b3f] has been reserved
    [ 0.375029] system 00:04: [io 0x0900-0x090f] has been reserved
    [ 0.375030] system 00:04: [io 0x0910-0x091f] has been reserved
    [ 0.375032] system 00:04: [io 0xfe00-0xfefe] has been reserved
    [ 0.375034] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.375035] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.375037] system 00:04: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.375038] system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.375040] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.375041] system 00:04: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 0.375043] system 00:04: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.375044] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375070] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.375071] pnp 00:05: [io 0x0290-0x029f]
    [ 0.375073] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.375097] system 00:05: [io 0x0290-0x029f] has been reserved
    [ 0.375098] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375202] pnp 00:06: [dma 4]
    [ 0.375203] pnp 00:06: [io 0x0000-0x000f]
    [ 0.375205] pnp 00:06: [io 0x0081-0x0083]
    [ 0.375206] pnp 00:06: [io 0x0087]
    [ 0.375207] pnp 00:06: [io 0x0089-0x008b]
    [ 0.375208] pnp 00:06: [io 0x008f]
    [ 0.375209] pnp 00:06: [io 0x00c0-0x00df]
    [ 0.375224] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.375229] pnp 00:07: [io 0x0070-0x0071]
    [ 0.375236] pnp 00:07: [irq 8]
    [ 0.375249] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.375253] pnp 00:08: [io 0x0061]
    [ 0.375267] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.375275] pnp 00:09: [io 0x0010-0x001f]
    [ 0.375276] pnp 00:09: [io 0x0022-0x003f]
    [ 0.375277] pnp 00:09: [io 0x0044-0x005f]
    [ 0.375278] pnp 00:09: [io 0x0062-0x0063]
    [ 0.375279] pnp 00:09: [io 0x0065-0x006f]
    [ 0.375280] pnp 00:09: [io 0x0072-0x007f]
    [ 0.375281] pnp 00:09: [io 0x0080]
    [ 0.375282] pnp 00:09: [io 0x0084-0x0086]
    [ 0.375283] pnp 00:09: [io 0x0088]
    [ 0.375283] pnp 00:09: [io 0x008c-0x008e]
    [ 0.375284] pnp 00:09: [io 0x0090-0x009f]
    [ 0.375285] pnp 00:09: [io 0x00a2-0x00bf]
    [ 0.375286] pnp 00:09: [io 0x00e0-0x00ef]
    [ 0.375287] pnp 00:09: [io 0x04d0-0x04d1]
    [ 0.375314] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.375316] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375320] pnp 00:0a: [io 0x00f0-0x00ff]
    [ 0.375323] pnp 00:0a: [irq 13]
    [ 0.375337] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.375366] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375489] pnp 00:0c: [io 0x03f8-0x03ff]
    [ 0.375492] pnp 00:0c: [irq 4]
    [ 0.375493] pnp 00:0c: [dma 0 disabled]
    [ 0.375524] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.375590] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
    [ 0.375609] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.375611] pnp: PnP ACPI: found 14 devices
    [ 0.375612] ACPI: ACPI bus type pnp unregistered
    [ 0.381875] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.381877] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.381879] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
    [ 0.381881] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
    [ 0.381884] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.381886] pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
    [ 0.381889] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
    [ 0.381891] pci 0000:00:0a.0: bridge window [mem 0xfe100000-0xfe1fffff]
    [ 0.381893] pci 0000:00:0a.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
    [ 0.381895] pci 0000:00:14.4: PCI bridge to [bus 04-04]
    [ 0.381922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.381923] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.381925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.381926] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
    [ 0.381927] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
    [ 0.381928] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.381930] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
    [ 0.381931] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
    [ 0.381932] pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
    [ 0.381934] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
    [ 0.381935] pci_bus 0000:03: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref]
    [ 0.381936] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.381937] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.381939] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.381940] pci_bus 0000:04: resource 7 [mem 0x000c8000-0x000dffff]
    [ 0.381941] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
    [ 0.381970] NET: Registered protocol family 2
    [ 0.382171] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.383495] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.385589] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.385848] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.385850] TCP: reno registered
    [ 0.385863] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.385947] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.386083] NET: Registered protocol family 1
    [ 0.693943] pci 0000:01:00.0: Boot video device
    [ 0.694042] PCI: CLS 64 bytes, default 64
    [ 0.694145] Unpacking initramfs...
    [ 1.743084] Freeing initrd memory: 14596k freed
    [ 1.747910] PCI-DMA: Disabling AGP.
    [ 1.748019] PCI-DMA: aperture base @ d0000000 size 65536 KB
    [ 1.748020] PCI-DMA: using GART IOMMU.
    [ 1.748022] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 1.751082] LVT offset 1 assigned for vector 0x400
    [ 1.751090] IBS: LVT offset 1 assigned
    [ 1.751117] perf: AMD IBS detected (0x0000001f)
    [ 1.751254] audit: initializing netlink socket (disabled)
    [ 1.751263] type=2000 audit(1346165429.643:1): initialized
    [ 1.752226] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.754614] VFS: Disk quotas dquot_6.5.2
    [ 1.754642] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.754742] msgmni has been set to 31965
    [ 1.754996] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.755035] io scheduler noop registered
    [ 1.755036] io scheduler deadline registered
    [ 1.755067] io scheduler cfq registered (default)
    [ 1.755441] GHES: HEST is not enabled!
    [ 1.755524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.776028] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.796745] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.796898] Linux agpgart interface v0.103
    [ 1.796939] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 1.799184] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.799201] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.799378] mousedev: PS/2 mouse device common for all mice
    [ 1.799416] rtc_cmos 00:07: RTC can wake from S4
    [ 1.799536] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.799559] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.799568] cpuidle: using governor ladder
    [ 1.799569] cpuidle: using governor menu
    [ 1.799662] TCP: cubic registered
    [ 1.799729] NET: Registered protocol family 10
    [ 1.799851] NET: Registered protocol family 17
    [ 1.799854] Registering the dns_resolver key type
    [ 1.799960] PM: Hibernation image not present or could not be loaded.
    [ 1.799964] registered taskstats version 1
    [ 1.800940] rtc_cmos 00:07: setting system clock to 2012-08-28 14:50:29 UTC (1346165429)
    [ 1.800981] Initializing network drop monitor service
    [ 1.822527] Freeing unused kernel memory: 740k freed
    [ 1.822649] Write protecting the kernel read-only data: 8192k
    [ 1.825648] Freeing unused kernel memory: 1588k freed
    [ 1.827239] Freeing unused kernel memory: 640k freed
    [ 1.834108] systemd-udevd[85]: starting version 186
    [ 1.844450] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 1.844477] ACPI: Power Button [PWRB]
    [ 1.844867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 1.844874] ACPI: Power Button [PWRF]
    [ 1.845424] wmi: Mapper loaded
    [ 1.851862] SCSI subsystem initialized
    [ 1.852312] usbcore: registered new interface driver usbfs
    [ 1.852333] usbcore: registered new interface driver hub
    [ 1.852480] usbcore: registered new device driver usb
    [ 1.853090] libata version 3.00 loaded.
    [ 1.854235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.854486] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 1.854516] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.854526] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.854550] QUIRK: Enable AMD PLL fix
    [ 1.854561] ehci_hcd 0000:00:12.2: debug port 1
    [ 1.854584] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe309000
    [ 1.855984] [drm] Initialized drm 1.1.0 20060810
    [ 1.856315] tg3.c:v3.123 (March 21, 2012)
    [ 1.860078] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.860126] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.860220] xhci_hcd 0000:02:00.0: irq 46, io mem 0xfe200000
    [ 1.860271] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
    [ 1.860497] xHCI xhci_add_endpoint called for root hub
    [ 1.860498] xHCI xhci_check_bandwidth called for root hub
    [ 1.860549] hub 2-0:1.0: USB hub found
    [ 1.860554] hub 2-0:1.0: 2 ports detected
    [ 1.860633] MXM: GUID detected in BIOS
    [ 1.860702] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.860707] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
    [ 1.861017] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c8000a1)
    [ 1.861356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.864189] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
    [ 1.864478] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.864657] xHCI xhci_add_endpoint called for root hub
    [ 1.864659] xHCI xhci_check_bandwidth called for root hub
    [ 1.864756] hub 3-0:1.0: USB hub found
    [ 1.864761] hub 3-0:1.0: 2 ports detected
    [ 1.865261] hub 1-0:1.0: USB hub found
    [ 1.865263] hub 1-0:1.0: 5 ports detected
    [ 1.871931] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 1.871944] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.871951] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.872006] ehci_hcd 0000:00:13.2: debug port 1
    [ 1.872019] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe307000
    [ 1.872214] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:fb:07:f2
    [ 1.872217] tg3 0000:03:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
    [ 1.872219] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 1.872221] tg3 0000:03:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
    [ 1.881056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.881233] hub 4-0:1.0: USB hub found
    [ 1.881235] hub 4-0:1.0: 5 ports detected
    [ 1.891094] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [ 1.891099] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
    [ 1.891107] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.891127] ehci_hcd 0000:00:16.2: debug port 1
    [ 1.891136] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe304000
    [ 1.901001] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 1.901109] hub 5-0:1.0: USB hub found
    [ 1.901111] hub 5-0:1.0: 4 ports detected
    [ 1.911181] ahci 0000:00:11.0: version 3.0
    [ 1.911290] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl RAID mode
    [ 1.911293] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 1.911843] scsi0 : ahci
    [ 1.911924] scsi1 : ahci
    [ 1.911982] scsi2 : ahci
    [ 1.912040] scsi3 : ahci
    [ 1.912074] ata1: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b100 irq 19
    [ 1.912077] ata2: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b180 irq 19
    [ 1.912079] ata3: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b200 irq 19
    [ 1.912081] ata4: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b280 irq 19
    [ 1.924354] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 1.924361] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
    [ 1.924379] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe30a000
    [ 1.968684] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [ 1.968685] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
    [ 1.968687] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [ 1.968689] [drm] nouveau 0000:01:00.0: Bios version 70.10.17.00
    [ 1.968691] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [ 1.968824] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
    [ 1.968825] [drm] nouveau 0000:01:00.0: DCB version 4.0
    [ 1.968827] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000000
    [ 1.968828] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
    [ 1.968830] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011380 00000000
    [ 1.968831] [drm] nouveau 0000:01:00.0: DCB outp 03: 08011382 00020030
    [ 1.968832] [drm] nouveau 0000:01:00.0: DCB outp 04: 02022362 00020010
    [ 1.968834] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
    [ 1.968835] [drm] nouveau 0000:01:00.0: DCB conn 01: 00010130
    [ 1.968836] [drm] nouveau 0000:01:00.0: DCB conn 02: 00002261
    [ 1.968840] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x69CF
    [ 1.981590] hub 6-0:1.0: USB hub found
    [ 1.981594] hub 6-0:1.0: 5 ports detected
    [ 1.990810] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.990815] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
    [ 1.990825] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe308000
    [ 1.993669] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x706F
    [ 2.001030] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x84CC
    [ 2.001032] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x84D6
    [ 2.001107] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x874A
    [ 2.001108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x87AF
    [ 2.021077] [drm] nouveau 0000:01:00.0: 0x87AF: Condition still not met after 20ms, skipping following opcodes
    [ 2.022345] [TTM] Zone kernel: Available graphics memory: 8184556 kiB
    [ 2.022346] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 2.022348] [TTM] Initializing pool allocator
    [ 2.022351] [TTM] Initializing DMA pool allocator
    [ 2.022357] [drm] nouveau 0000:01:00.0: Detected 1536MiB VRAM (GDDR5)
    [ 2.028259] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [ 2.032862] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.032863] [drm] No driver support for vblank timestamp query.
    [ 2.038267] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
    [ 2.038270] [drm] nouveau 0000:01:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 963mV fanspeed 50%
    [ 2.048148] hub 7-0:1.0: USB hub found
    [ 2.048153] hub 7-0:1.0: 5 ports detected
    [ 2.057333] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 2.057339] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
    [ 2.057352] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe306000
    [ 2.114631] hub 8-0:1.0: USB hub found
    [ 2.114635] hub 8-0:1.0: 2 ports detected
    [ 2.123850] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [ 2.123856] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
    [ 2.123865] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe305000
    [ 2.181148] hub 9-0:1.0: USB hub found
    [ 2.181153] hub 9-0:1.0: 4 ports detected
    [ 2.190648] scsi4 : pata_atiixp
    [ 2.190752] scsi5 : pata_atiixp
    [ 2.190846] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 2.190847] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 2.293094] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x1e0000, bo ffff88040818f800
    [ 2.293163] fbcon: nouveaufb (fb0) is primary device
    [ 2.335049] Console: switching to colour frame buffer device 160x64
    [ 2.341510] fb0: nouveaufb frame buffer device
    [ 2.341511] drm: registered panic notifier
    [ 2.341514] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
    [ 2.360391] ata5.00: ATAPI: TSSTcorp DVDWBD SH-B123L, SB01, max UDMA/100
    [ 2.360395] ata5.00: limited to UDMA/33 due to 40-wire cable
    [ 2.373688] ata5.00: configured for UDMA/33
    [ 2.396639] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.396693] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.396744] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.396801] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.397615] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA58A, max UDMA/133
    [ 2.397625] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.398801] ata1.00: configured for UDMA/133
    [ 2.398954] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
    [ 2.404632] ata3.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
    [ 2.404641] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.405659] ata3.00: configured for UDMA/133
    [ 2.408673] ata4.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
    [ 2.408681] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.409685] ata4.00: configured for UDMA/133
    [ 2.632821] usb 6-1: new full-speed USB device number 2 using ohci_hcd
    [ 2.749232] Refined TSC clocksource calibration: 3547.662 MHz.
    [ 2.749249] Switching to clocksource tsc
    [ 2.797377] ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 2.797385] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.800668] ata2.00: configured for UDMA/133
    [ 2.800848] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 2.801117] scsi 2:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
    [ 2.801300] scsi 3:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
    [ 2.802197] scsi 4:0:0:0: CD-ROM TSSTcorp DVDWBD SH-B123L SB01 PQ: 0 ANSI: 5
    [ 2.808878] input: Logitech G500 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/input/input2
    [ 2.808951] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:12.0-1/input0
    [ 2.810014] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.810063] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.810071] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.810099] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.810103] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.810108] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.810111] sd 2:0:0:0: [sdc] Write Protect is off
    [ 2.810114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.810117] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.810120] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.810131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.810134] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.810138] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.810150] sd 3:0:0:0: [sdd] Write Protect is off
    [ 2.810152] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.810176] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.813047] sr0: scsi3-mmc drive: 48x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.813050] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.813450] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.815327] sdc: sdc1
    [ 2.815338] sdc: p1 size 1323974656 extends beyond EOD, enabling native capacity
    [ 2.815862] sdc: sdc1
    [ 2.815864] sdc: p1 size 1323974656 extends beyond EOD, truncated
    [ 2.816306] sd 2:0:0:0: [sdc] Attached SCSI disk
    [ 2.820604] sdd: unknown partition table
    [ 2.820852] input: Logitech G500 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/input/input3
    [ 2.821030] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:12.0-1/input1
    [ 2.821049] usbcore: registered new interface driver usbhid
    [ 2.821051] usbhid: USB HID core driver
    [ 2.821054] sd 3:0:0:0: [sdd] Attached SCSI disk
    [ 2.842563] sda: sda1 sda2 < sda5 >
    [ 2.843060] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.850498] sdb: sdb1
    [ 2.850966] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 3.048555] usb 6-2: new full-speed USB device number 3 using ohci_hcd
    [ 3.226120] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/input/input4
    [ 3.226175] generic-usb 0003:045E:0768.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:12.0-2/input0
    [ 3.243889] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/input/input5
    [ 3.243936] generic-usb 0003:045E:0768.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:12.0-2/input1
    [ 3.490898] usb 7-2: new full-speed USB device number 2 using ohci_hcd
    [ 5.063613] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.3/input/input6
    [ 5.063736] generic-usb 0003:046D:0A1F.0005: input,hiddev0,hidraw4: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:13.0-2/input3
    [ 6.475469] ISO 9660 Extensions: RRIP_1991A
    [ 6.597054] loop: module loaded
    [ 7.533161] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 7.538096] device-mapper: uevent: version 1.0.3
    [ 7.538248] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 7.550379] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
    [ 9.109438] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
    [ 9.971361] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
    [ 13.089291] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 14.352119] systemd-udevd[340]: starting version 186
    [ 17.929068] FS-Cache: Loaded
    [ 18.438650] RPC: Registered named UNIX socket transport module.
    [ 18.438652] RPC: Registered udp transport module.
    [ 18.438653] RPC: Registered tcp transport module.
    [ 18.438654] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 18.782016] ACPI: processor limited to max C-state 1
    [ 19.635195] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 19.635240] sp5100_tco: mmio address 0xbafe00 already in use
    [ 20.204771] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 20.640467] EDAC MC: Ver: 2.1.0
    [ 20.777274] powernow-k8: Found 1 AMD Phenom(tm) II X6 1100T Processor (6 cpu cores) (version 2.20.00)
    [ 20.777285] powernow-k8: Core Performance Boosting: on.
    [ 20.777323] powernow-k8: 0 : pstate 0 (3300 MHz)
    [ 20.777324] powernow-k8: 1 : pstate 1 (2500 MHz)
    [ 20.777325] powernow-k8: 2 : pstate 2 (1700 MHz)
    [ 20.777326] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 20.862178] MCE: In-kernel MCE decoding enabled.
    [ 20.879881] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 20.880685] AMD64 EDAC driver v3.4.0
    [ 20.880940] EDAC amd64: DRAM ECC disabled.
    [ 20.880985] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [ 20.880989] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [ 20.880993] (Note that use of the override may cause unknown side effects.)
    [ 21.149386] microcode: CPU0: patch_level=0x010000bf
    [ 21.151641] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.151695] microcode: CPU1: patch_level=0x010000bf
    [ 21.152602] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.152661] microcode: CPU2: patch_level=0x010000bf
    [ 21.153521] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.153564] microcode: CPU3: patch_level=0x010000bf
    [ 21.154417] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.154464] microcode: CPU4: patch_level=0x010000bf
    [ 21.155273] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.155320] microcode: CPU5: patch_level=0x010000bf
    [ 21.156146] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 21.156367] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 21.398431] NFS: Registering the id_resolver key type
    [ 21.398447] FS-Cache: Netfs 'nfs' registered for caching
    [ 21.398865] systemd-modules-load[343]: Inserted module 'nfs'
    [ 21.848081] usbcore: registered new interface driver snd-usb-audio
    [ 22.019691] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 22.019773] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 22.019885] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 22.019956] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 22.020013] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 22.020063] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
    [ 22.020191] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
    [ 22.020309] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
    [ 22.020776] hda_intel: Disabling MSI
    [ 22.951109] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
    [ 22.951340] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
    [ 22.951541] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
    [ 22.951732] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input19
    [ 23.381688] systemd-vconsole-setup[441]: /usr/bin/loadkeys failed with error code 1.
    [ 23.381709] systemd-vconsole-setup[441]: /usr/bin/setfont failed with error code 1.
    [ 23.727260] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 52.336128] raid0: Unknown parameter `raid1'
    [ 55.491171] md: raid0 personality registered for level 0
    [ 56.378538] md: raid1 personality registered for level 1
    [ 72.262557] md: raid10 personality registered for level 10
    [ 398.203893] ISOFS: Unable to identify CD-ROM format.
    [ 398.209523] SQUASHFS error: Can't find a SQUASHFS superblock on sdb
    [ 399.396899] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
    [ 399.418501] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
    [ 399.440053] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
    [ 404.613431] fuse init (API version 7.18)
    [ 521.944483] mdadm: sending ioctl 800c0910 to a partition!
    [ 521.944491] mdadm: sending ioctl 800c0910 to a partition!
    [ 521.944499] mdadm: sending ioctl 1261 to a partition!
    [ 521.944504] mdadm: sending ioctl 1261 to a partition!
    [ 521.944657] mdadm: sending ioctl 1261 to a partition!
    [ 521.944662] mdadm: sending ioctl 1261 to a partition!
    [ 521.944802] mdadm: sending ioctl 1261 to a partition!
    [ 521.944806] mdadm: sending ioctl 1261 to a partition!
    [ 521.944941] mdadm: sending ioctl 1261 to a partition!
    [ 521.944945] mdadm: sending ioctl 1261 to a partition!
    Last edited by Kent (2012-09-21 10:17:41)

    00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
    00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port A)
    00:11.0 RAID bus controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] (rev 40)
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
    00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
    00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
    00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:00.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 580] (rev a1)
    01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
    02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
    03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
    If that's the output of lspci , i don't see any hardware raid controller .
    You are probably using the raid option of a motherboard's sata controller .
    Those controllers typically rely on the cpu for operation, lack a raid bios and need a software driver to access the array.
    lilsirecho' post above should help you to get started.

  • MacBook Pro doesn't recognise new Internal HDD

    Hi there, I was hoping to get some help on this ...
    I purchased a WD Scorpio Blue 750GB internal HDD and Apricorn kit and used SuperDuper to clone my current internal HDD. The clone copy worked fine and I can boot the OS via the new WD HDD if it’s connected via USB, but when I install it inside, the Macbook doesn’t recognise it and a folder with a blinking ‘?’ appears.
    I’ve tried booting up from the disk utility on start up to hopefully select it and that doesn’t work either as it cannot find the HDD.
    I’ve tried booting up from disk utility and using my Time Machine back-ups to copy over the new WD HDD but it doesn’t recognise the new internal HDD either.
    I did format it before I cloned the new drive to be OS Extended (Journaled) but I didn’t make multiple partitions and not sure if this is a step I'm missing.
    When I put the old HDD back in it boots fine.
    Any advice would be greatly appreciated
    Cheers, Sam

    Didn't matter how many times I reformatted, partitioned mapped the HDD when it was connected externally, the issue was was the Super Duper clone. (even though it would start up as an external start up disk.)
    Had to install the new HDD internally and reformat it from boot up through Disk Utility then do a restore from a previous Time Machine back up.
    Works fine now, no issues.

  • I have a Lacie hard drive which my Macbook pro doesn't recognise any ideas why and can I solve this problem?

    I have a Lacie external hard drive which my Macbook Pro doesn't recognise is there a soloution to this as I have work files that I need to access?  Thanks

    Hi..
    Open the Finder. From the Finder menu bar top of your screen click Finder > Preferences > General
    Make sure:  External disks   is selecteed.

  • Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Maybe because it's not a 'genuine' retail version? Many OEM versions just don't work - and I've no idea which flavor of Win7 your friend downloaded. Obviously one that Boot Camp doesn't recognize. Best to just pony up the cash for a full retail version, of some flavor - and use it. You COULD, of course, download the 14-day trial version of Parallels Desktop and see if you can install Win7 as a virtual machine... it might or might not work. Boot Camp just isn't finding the resources it needs on the copy you have - try Parallels and if that doesn't work just purchase a retail (or student discounted) version.
    Clinton

  • I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

    I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • Windows doesn't recognise my reset iPod

    A couple of days ago my iPod started flicking through songs of it’s own accord, as though I was pressing on the “Forwards” button repeatedly. I Reset it and now I get Three graphics appearing on the screen: The Apple Logo, A Sad iPod and a Battery (low on power).
    Now Windows (XP home) doesn’t recognise the iPod (even on disk mode) so I can’t update or restore it. I’ve also tried reinstalling iTunes and that didn’t work either. How can I get my iPod working again?
    Any advice would be appreciated, thanks
    20 GB Click Wheel   Windows XP  

    You don't have to wipe anything, but when you get a chance make sure you backed up to icloud.
    What that means is your contacts inside of the phone either physically or liquid damaged. To check
    which, you can look inside and if you see a little pink, that would give you a water damage. If you don't
    see pink it means that you to many times plugged in that charger the other way or tried to. May be
    used some other things to plug in. If you flash the light in you may be able to see those contacts.
    If I were you, i would not believe me, good luck!

  • BCA doesn't recognise partition (for erasure)

    I recently tried to set up Windows XP on my OS 10.6. with BCA. Since something appears to be faulty with the set up, I want to erase the partition and start again. However, BCA doesn't recognise this partition so wants to go ahead with installation. In other words, I am not getting the screen from step 5 from this guide:
    https://discussions.apple.com/thread/3955314
    Does anyone know if I can just use DU to erase this disk?
    Thank you.
    MacBook OS X 10.6.8

    I managed to sort this out (in case anyone has a similar problem). I hadn't appreciated that BCA doesn't function when there are more than 2 partitions on the hard disk. Having installed Windows, I'd also partioned the remaining Macintosh disk to include one for Time Machine. It was the resulting 3 partitions that BCA didn't like. So to resolve the problem I had to delete the TM partition, then BCA was able to recognise the Windows / BootCamp partition in order for it to be deleted.

  • Laptop doesn't recognise any plugged in usb devices

    laptop doesn't recognise any plugged in usb devices
    HP laptop G6000

    I went to the BIOS to check the power feature settings. Here's what I have set with the BIOS-offered explanation for each option:
    - ACPI BIOS IRQ--> *IRQ9*  [This field controls what IRQ the Advanced Configuration & Power Interface (ACPI) will use.]
    - ACPI Standby mode--> *S1*  [Select which power level your system goes to during standby. If S1 is selected, power is maintained to all devices but all processor activity is halted. If S3 is selected, power is maintained only for the main memory. Exit from the S3 state may not be supported by all installed adapters.]
    - Hard disk timeout--> *Enabled*  [Allows HDDs connected to the system board to automatically enter low power mode after a period of inactivity (about 20 minutes). HDD adapters may not support this function.]
    - After power loss--> *Power on*  [Select "Power on" if you use a power strip to turn the system on.]
    Yesterday I think I changed one of the above but it didn't help the problem with the detection of plugged-in USB devices.
    Today I turned off (disabled) Wake on LAN. This didn't help either: after plugging in one or more USB devices, I still have to open Konsole and run lsusb to wake up the system which then detects the already plugged-in USB device(s) and asks me what I want to do, what app I want to use to read or use the plugged-in USB device. This of course is only a minor annoyance-- maybe I'll never figure out or learn why this problem has been happening in my recently acquired older (2005-built) IBM ThinkCenter desktop tower.
    Do you still want to see the output of # lsusb -v  ?? Tell me where on the web I can post the long output of that command. [The output won't fit in this space-limited reply form.] Also, any more ideas on what could be wrong?

Maybe you are looking for