Udisks2 sees usb storage as internal

Since some days my MP3 player is seen by KDE as an internal storage device rather than external. This is quite annoying since device notifier doesn't show it and, most of all, my music doesn't show up in amarok anymore. I think that the problem is with udisks2 recognizing the device as internal.
First of all, here's the device:
$ udisksctl info -b /dev/sdc
/org/freedesktop/UDisks2/block_devices/sdc:
org.freedesktop.UDisks2.Block:
Configuration: []
CryptoBackingDevice: '/'
Device: /dev/sdc
DeviceNumber: 2080
Drive: '/org/freedesktop/UDisks2/drives/Philips_GoGear_Raga_18000000E0278D140002DCD4E2D40D14'
HintAuto: false
HintIconName:
HintIgnore: false
HintName:
HintPartitionable: true
HintSymbolicIconName:
HintSystem: true
Id: by-id-usb-Philips_GoGear_Raga_18000000E0278D140002DCD4E2D40D14-0:0
IdLabel:
IdType:
IdUUID:
IdUsage:
IdVersion:
MDRaid: '/'
MDRaidMember: '/'
PreferredDevice: /dev/sdc
ReadOnly: false
Size: 3874488320
Symlinks: /dev/disk/by-id/usb-Philips_GoGear_Raga_18000000E0278D140002DCD4E2D40D14-0:0
/dev/disk/by-path/pci-0000:00:0b.1-usb-0:6:1.0-scsi-0:0:0:0
org.freedesktop.UDisks2.PartitionTable:
Type: dos
I tried to:
1) install gvfs: no success.
2) fix as suggested here (using UDISKS_SYSTEM rather than UDISKS_SYSTEM_INTERNAL): the device can be mounted without typing the password, but it's still seen as internal.
3) downgrade to udisks2 2.0.1-1 from 2.1.0-2: no success.
Can anyone please help me or give me a hint? Thanks.

Bought music from iTunes can be copied to the PC by right clicking on your Ipod in the device list and choosing "transfer purchases".
For all other media you'll have to use 3rd party software, like Touchcopy for example.
If you haven't synced to your new computer, remember that iTunes will erase the content during the first sync.
To save your data and settings do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

Similar Messages

  • My new iPhone 5 won't connect to iTunes, and when I connect to my computer it comes up as a usb storage device, also in the phone itself under usage it shows internal memory of 2gb and sd card 64 gb, is this an original iPhone or have I been sold a copy

    My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • Yoga tablet 2 1050 problem to connect to my pc as usb storage

    when i connect my yoga to my pc (win7) it sees as CD with lenovo suite.but i cant install it.when i start intalling lenovo suite nothing happens on my tab there are only 2 options MTP and PTP (there is also ADB) but there is not as usb storage so i cant copy files via usb from my pc directly

    Any videos copied to the internal drive play fine, the same video copied to SD card will not play. This problem is all related to the SD card and can now be closed.

  • V-cast setup issue; turning USB storage off

    .I am trying to use V-cast. Media Manager. 
    I've installed the app on my Droid X and on my desktop. I have the USB cable connected and  I have V-Case MM open on my desktop. Everything seems to be set to "Go" until I launch V-cast on the phone.
    When I do that I get the following error: "Memory card error, card mounted or not present.  Please make sure memory card is inserted and USB storage is turned off."
    I know the card is present, and mounted because the Droid X comes with the card already installed. 
    But I went to "Settings/SD card & phone storage settings" just to be sure.  It shows "Total space 14.87GB" and "Available space 14.80GB", and an "Mount SD Card" option.  "Internal phone storage" shows 6.22GB of available space.
    Now here's the rub. 
    When I plug in the USB cable in the SD card data information changes to "unavailable" and the "Unmount..." option changes to "Mount SD card".
    I'm guessing the issue is with the last part of the error message: "USB storage is turned off" but I don't know how to turn it on.
    What is USB storage?  Is it to off site storage option Verizon offers?  Am I required to "Subscribe" in order for this app to work?

    I believe you have to be in PC Mode not Mass Storage...  Try changing that under mount options.

  • [solved] usb-storage-devices (sticks) are not longer mapped via citrix

    Hello,
    at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
    Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
    Last edited by uhoso (2015-04-23 08:57:49)

    Hello,
    at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
    Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
    Last edited by uhoso (2015-04-23 08:57:49)

  • No USB storage automounting in LXDE

    I'm running LXDE on top of Arch. I have followed the wiki, but it still does not seem to automatically mount my USB storage devices.
    I can use dmesg to see that the device is inserted and recognized. I can manually mount the device and copy files.
    I have done the following:
    * Check the checkbox to automatically mount inserted storage devices in PCManFM
    * Ensure that udisks2 is installed
    * Add the policykit file described in the troubleshooting section of the PCManFM wiki (even though the problem it describes isn't exactly my problem)
    This thread appears to be completely obsolete, so though I read it I didn't glean anything actionable
    It isn't clear to me whether this thread is relevant to my interests; the resolution certainly isn't.
    I can use udiskie to automount the USB media. Maybe I'm dumb for thinking that LXDE (or PCManFM) should do it for me without having to run udiskie first, but I figured I'd ask in case there's an easier way I'm not aware of.

    jasonwryan wrote:If you are running systemd, and have an active session, then the polkit rule is unnecessary, unhelpful even.
    OK, good to know. I'll remove the rule.
    Thanks for the replies. Lucke, your guess makes sense...that would explain why all the LXDE info for automounting assumes it will just automagically work, even though it clearly doesn't.

  • Apps to USB Storage issue on A2107A-f

    Running in to an issue trying to move apps to USB storage.  When I move the app to USB storage, the icon disappears from the display screen. The app is still on the device and can be found if I look under the App folder, but no longer shows up on the customizable screens.  On the other hand, any apps that remain under Tablet storage still show up on the customizable screens. This wouldn't be such a problem for me if it wasn't for the fact that of the 8GB storage on this device, 2.29GB is allocated for internal or Tablet storage.  So, it doesn't take long to fill up that space with apps.
    Would appreciate any help.  I did try calling Lenovo tech support and that was fruitless.

    I have the exact problem. There is no solution according to my tech.
    Moderator comment: Post edited to conform with the Community Rules.

  • The USB device Apple Internal Keyboard / Trackpad

    Hello,
    in the console of my rMBP 13 mid 2014 I have a lot of messages of this type:
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (1)
    can please somebody give me some information what this message mean?
    Thanks

    There are 3 checks that can be performed initially:
    - perform a NVRAM reset : About NVRAM and PRAM
    - perform a SMC reset: Intel-based Macs: Resetting the System Management Controller (SMC)
    - perform a Safe Boot : OS X: What is Safe Boot, Safe Mode?  
    - then reboot to normal
    If the issue persists:  run Diagnostics. Using Apple Diagnostics
    and check if any codes come up : Apple Diagnostics: Reference codes
    Cheers

  • How can I see file with chinese name in Sunray USB storage?

    hi, All
    I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
    I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
    best regards
    xiong wei

    You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
    Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
    To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.

  • USB storage with WRT610N....help!

    After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
    I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop.  Here's the specifics:
    Desktop is an older Dell XPS runnings XP SP3.  Desktop has three logons....for myself and my kids.
    I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
    I have an office laptop and I would like this to access the storage device
    Eventually I will be adding more computers to the network for my kids.
    I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
    Through 3 separate tech support calls, each tech tried a different approach to get this to work.  Nothing worked.  I want to start from scratch....  What is the best way to accomplish what I want to do?  After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
    A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
    Thanks in advance for your help!

    jal4680 wrote:
    After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
    I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop.  Here's the specifics:
    Desktop is an older Dell XPS runnings XP SP3.  Desktop has three logons....for myself and my kids.
    I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
    I have an office laptop and I would like this to access the storage device
    Eventually I will be adding more computers to the network for my kids.
    I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
    Through 3 separate tech support calls, each tech tried a different approach to get this to work.  Nothing worked.  I want to start from scratch....  What is the best way to accomplish what I want to do?  After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
    A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
    Thanks in advance for your help!
    The harsh reality is that the results for people trying to use the Storage Link function have been mixed, at best.  Especially in trying to utilize it for a "backuP' function.  The kernel used to manage the Storage Link is apparently unix/linux based, and has some difficulty playing nice with Windows based backup utilities.  Additionally, there have been reports that the connectivity to the attached devices is, at times, poor.  Finally, there are issues with file corruption (date/time stamps, specifically).  There have been no firmware updates to deal with these issues.  If your primary need is for an attached NAS solution, I would strongly recommend looking at other devices for that solution.

  • I am trying to add music to my computer and then put it on a usb storage device

    ok i havent used a computer in a very long time and the last time i did things seemed a whole lot easier.  i got a new laptop for valentines day and i still aint figured this thing out. what i am trying to do is add all my music cds to my computer, make some playlists, then download the music to a usb storage device so i can have the music in my truck.
    when i put a cd in my computer it pops up and it starts playing but i have no clue as what to do next. i have tried to make a playlist through the player that pops up and plays the music but aint having any luck. IM CLUELESS!!!! nothing ive tried has wroked, i need help please.
    thank you in advance

    Hi,
             The below link shows how to create playlist in Itunes.  Once the playlist is created, if you are using apple Ipod or any other apple product. Then once you connect the device it will start the sync with the device and then you can start playing.
    http://support.apple.com/kb/PH12340
    If you are using another device, then please do mention the device to which you want to sync the music and which player are using on the system.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

    Hello,
    I have a Windows Server 2012 R2.
    I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
    on it (this machine is also a domain client in the same domain).
    I will really be thankful if anyone can suggest some solution to this issue.
    Please feel free to write back in-case I have missed anything obvious to be shared.
    Thanks!
    -Vinay Pugalia
    If a post answers your question, please click "Mark As Answer" on that post or
    "Vote as Helpful".
    Web : Inkey Solutions
    Blog : My Blog
    Email : Vinay Pugalia

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedbackhere.
    Andy Qi
    TechNet Community Support

  • USB storage devices not being recognised

    Product:
    13" Macbook Pro w/ Retina Display (Late 2013 model)
    OS X Yosemite (version 10.10.2)
    2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
    Issue:
    - macbook unable to recognise USB storage devices.
    - can be found on disk utility but 'greyed out'.
    - cannot be found under devices in finder.
    - tried restarting laptop, no effect.
    - additional storage via Nifty + 64gb micro SD is working fine.
    - apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
    - USB-ethernet adapter appears to be working w/o problems too.
    - last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
    Hello everyone,
    I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
    I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
    I've attached a screenshot of the disk utility below as well.
    If anyone could help me out then that would be greatly appreciated.
    Thanks in advance!

    Some users on another Apple thread had success in running Kext Utility last November with similar issues.
    I ran kext utility 2.6.1, restarted my computer and everything was working again.

  • My Pro freezes when I connect USB storage

    ok so for about a month and a half now, sometimes when I connect a USB storage device, my MBP (13 inch, from the most recent early 2011 line) will freeze. if there's an animation ont he screen, like the time machine symbol, it will keep going, but no response from keyboard or trackpad. at first it happened with a new cheap USB flash stick, so I thought it was that. but since then, once in a while it happens with my time machine USB hard drive, my android phone, and a different USB stick, none of which have had this problem before on anything, including my earlier Macbook from 2008. ideas/causes? this guy seems to have a similar problem: https://discussions.apple.com/message/15088832#15088832

    Hi f,
    Try an SMC Reset: http://support.apple.com/kb/HT3964         

  • How to detect if there is a USB Storage in my pc? VISUAL BASIC 6.0

    Hi sir. 
    my program has a function auto back up.  so i want to detect if there is a usb or not. if there's a usb then it will be save in the available usb storage. if there is no usb it wont save and will pop up a msg box saying "There is no USB device,
    please insert USB to continue back up" VB6 platform
    thank you sir.

    Hi NikkoProgrammer,
    Welcome to MSDN.
    I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
    Where to post your VB 6 questions
    You could consider posting this issue in these forums below:
    These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
    VB Forums
    VB City
    Thanks for your understanding.
    Best Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Vlc doesn't play H264 movies (matroska) [Solved]

    Hi @all, back on arch with my laptop and I'm really enjoying the speed compared to debian! And now arch supports full encrypted installations it is the perfect distro for me again. Installation and configuring went smooth so far but now I have a litt

  • Changes in ical won't update my Exchange 2007 server

    If I make a change in ical, it doesn't update my server calendar. It works the other way round. Can anyone help? Is it possible to make this work? My server support line tell me Exchange 2007 doesn't support ical.

  • Shortcut on Button in swing

    Dear Sir, Can i get help from you any one to create shortcut on button in swing like press ENTER to process. I am so worried that how do it. I am waiting so anxiously for u reply. Regards, Shah Jehan

  • Please help me reinstall CS5. I have contacted Adobe repeatedly. Noone wants to help, 4 books going to press Friday

    After Indesign crashing repeatedly for 2 hours due to a recovered file (I saved as, I exported, I imported the pages into a new document) I decided to reinstall my version of creative suite 5. The problem is that my serial number is an update. My ori

  • Installed iTunes 7.3.2 - doesn't work

    I recently installed the latest iTunes and whenever I open it, it immediately freezes and goes to "not responding" status and I have to ctrlaltdel it closed. I'm not running any fancy software, just doesn't work. Should I uninstall and redownload it,