UDO - Access the UDO from Wizard (2)

Hi,
How do I access the User Defined Object (UDO) build in SAP B1 Wizard in my C# Add-On?
Code sample could be nice!
Thank you!
Rune

Hello,
Sorry. Only the meta data of UDO via DI is possible now. UDO access via DI (Add, Update, Delete, Lines.Add() etc ) is unavailable at the moment. But it will be provided in B1 8.8 version (next main release). Thanks.
Kind Regards
-Yatsea

Similar Messages

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

Accessing the ServletContext from a class that is not a Servlet?

Is there any way of accessing the ServletContext from a class that is not a
          Servlet? The class is being used as part of a Web Application.
          Thanks.


http://www.mozilla.org/mirrors.html
Mozilla has download mirrors around the globe. If it is on the list, it is trustworthy.

Why can't I access the Store from my iTunes

Why can't I access the Store from my iTunes on my PC?

You must've blocked cookies. iTunes requires cookies I believe. If you did block it follow these steps:
Go to settings > safari > block cookies > never.

UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION

Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0

You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn .

How do I access the music from my Mac drive while booted into Windows?

How do I access the music from my Mac drive while booted into Windows via Bootcamp? I tried using MacDrive but it's not supported for Vista 64-bit edition. Is there another program out there that I can use? I just want to be able to access my music that's on Leopard while in Vista. Any advice will be much appreciated. Thanks in advance.

Your best bet is to move the music on the Windows side since Leopard will be able to read and play the music from the mounted Windows drive (Leopard will not be able write anything to the Windows NTFS partition).
In your case it won't work the other way around.
Axel F.

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www beginning of

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www to the beginning of the IP address.
I usually can eventually access the router, but it is way to much trouble. However, I use my iPad hundreds of times more often than my laptop.

Are you typing http:// in front of the IP address of the router? e.g. http://192.168.0.1
Sometimes, and with some routers it doesn't seem to like it if you miss off the http://

Thow to tether iPad to MacBook to access the web from the MacBook?

Am I missing something obvious here, or is this not possible?
There are plenty of posts on the web about how to tether an iPad to a phone, but I want to access the web from a MacBook, using my iPad's 3G access.
Is this possible? How?

To use it on the iPhone you enable it via the phone's Settings menu - the iPad doesn't have the same option in Settings so there is no way to turn it on/off, and therefore no way to share the iPad's connectivity with other devices.

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

How to access the cloud from my pc?

how to access the cloud from my pc?

Go to Verizonwireless.com, log in to your account (or register your phone number if you haven't done so). Once logged in, Go to My Verizon, My Device, Backup my contacts. That should bring you to your Cloud "dashboard" - where you can view Contacts, Photos, Videos, Music,Documents, and anything else you've sent to Verizon Cloud.
If this doesn't work for you, then where does it break down? Do you get any error messages?

How to access the Oracle from Unix when SID is not provided?

How to access the Oracle from Unix when SID is not provided.
User Name : xxx
Password : yyy
SID : SID
I use to access it using below command from Unix prompt:
sqlplus xxx/yyy@SIDNow since I dont have SID, how to access the Oracle DB from Unix Box?
User Name : xxx
Password : yyy
Service Name : zzz
Regards,
Sunny.

Hi Ajay
Thanks for the suggesstion :)..It worked as well.
The Actual problem was in the "tnsnames.ora" file where in I need to make entry for the new SERVICE name.
Now I am able to connect it properly.
Regards,
Sunny.

I would like to access an old Time machine back up from a Core 2 Duo Macbook, but no longer have a Mac. Can I access the backup from a cheaper old ibook, or would I need a Macbook. Is the OS important?

I would like to access an old Time machine back up from a Core 2 Duo Macbook, but no longer have a Mac. I am going to buy a used machien to acess this. Can I access the backup from a cheaper old ibook, or would I need a Macbook. Is the OS important?

right click on the folder that shows with the red negative sign, and select to "get info". In the long skinny window that appears, look in the "sharing and permissions" section. In the "name" column, you should see your current user name. Ensure the "privilege" is set to Read and Write. If your user name is not in the name column, click the + sign, and add it, ensuring the privileges are set to Read and Write

Does iTunes use Internet Explorer to access the internet from a PC with Windows Vista?

Does iTunes use Internet Explorer to access the internet from a PC with Windows Vista?

Are you using Windows XP or Windows Vista?
Did you remove iTunes and the other Apple software also, and then reinstall iTunes.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Did you try to put the iPhone into recovery mode?

I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen. Has anyone else had this problem?

I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen. Anyone have any suggestions?

From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

After updating my iphone 4 to IOS 5 should I be able to access the camera from the lock screen, or is tis only available with iPhone 4g?

after updating my iphone 4 to iOS5, shouldn't I be able to access the camera from the lock-screen, or is this just an iPhone 4s feature?

jmph wrote:
Double pressing the Home button displays the Camera button. However after the phone goes to sleep and is awakened the Camera button isn't there. A double press brings it back. Is there a way to make it stay there?
No, you will have to double press each time on the lock screen to bring back the camera button.

UDO - Access the UDO from Wizard (2)

Similar Messages

Maybe you are looking for