UDP traffic not hitting ACL when logged

2821 ISR
I've got a DAPE ACL I'm trying to build. One of the entries that caused a lot of problems was permitting NTP (UDP 123). I had an entry like this on an ACL:
permit udp <my.src.lan.ip> 0.0.0.255 host <our.external.NTP.server> log
This line did not get any hits, and NTP updates were failing on our Windows clients. (the final line is a deny ip any any)
I changed this line to read:
permit udp <my.src.lan.ip> 0.0.0.255 host <our.external.NTP.server>
Note that the only difference is that I'm not logging this line.
Once change, I saw hits on this line, and NTP updates on our Windows clients suddenly started going through and working.
Is this normal behavior? I can't see why logged ACL entries would make them fail to get picked up and let through.

Hello.
I believe the entry is not interface ACL, but NAT ACL.
"log" keyword is not supported inside NAT ACLs, that is why you observed connectivity issue.

Similar Messages

I have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

ORACLE Not Available - only when logged on as another user

I can't figure out what I forgot. I installed everything (RH 6.1
and standard) and can login as internal from user oracle no
problems.
When I login from a user I have granted dba to I get Error
01034: ORACLE not Available. This is in sqlplus. I am sure it is
something obvious as I had it working before my 5th reinstall.
Thanks,
Jon Griffin
null

Jon,
Are you sure that the Database is started? You will get this
error if it isn't.
Chris
Jon Griffin (guest) wrote:
: I can't figure out what I forgot. I installed everything (RH
6.1
: and standard) and can login as internal from user oracle no
: problems.
: When I login from a user I have granted dba to I get Error
: 01034: ORACLE not Available. This is in sqlplus. I am sure it
is
: something obvious as I had it working before my 5th reinstall.
: Thanks,
: Jon Griffin
null

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

HT1414 I was using my IPAD this morning. Powered it down, then when I powered it back up, it said activation required.. but it would not accept my password. I hit skip and logged in fine. Is this something I should be concerned about?

I was using my IPAD this morning. Powered it down, then when I powered it back up, it said activation required.. but it would not accept my password. I hit skip and logged in fine. Is this something I should be concerned about?

Probably - if it happens again. Chalk it up to a fluke occurrence for now.
I get the message on my iPad that it can't connect to the iTunes Store - While I am in the iTunes Store or the App Store happily navigating from one tab to another.
You can try rebooting the iPad to "clear the cobwebs" but if it is OK now, I probably wouldn't be overly worried. Rebooting being holding down on the sleep and home buttons until the Apple logo appears on the screen.

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
You said the battery was low so let it recharge for a while.
You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
http://www.apple.com/support/ipod/five_rs/wheel/

HT1338 i currently have a macbook 2.1 and want to update. what can it support? I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account.

i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?

Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either.

Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either. So I can't update my apps, download songs or games now as it will charge my friend

Hello, 34sandy.
Thank you for the question. This behavior is normal if updated on another Apple ID account holders computer. To change the Apple ID on your device, follow the steps in the article below.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

When logging in to Icloud I get the message 'Apple ID' is valid but is not an Icloud Account. I have changed passord but still get the same message.

I have just set up Icloud and backed up files to it. I have not been able to log in. I get the message 'Apple ID is valid but is not an Icloud account. I have the same User ID for Icloud and Apple but different passwords. Neither combinations work. I have reset passwords twice but get the same result.

You cannot set up an iCloud account on Windows - is that where you tried to do it? The error message you quote is what happens when, having an Apple ID, you attempt to use it on Windows to create an iCloud account. You can create an iCloud account on a Mac or an iOS device, then you can sign into it in the Windows Control Panel. None of this should have any effect in the iTunes Store (the forum for which is where you have posted).

Windows Patching - Error when logging in - "The Specified procedure could not be found"

Hi,
I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new
local account (via my machine remotely), but still no luck. Have checked Event Viewer and Windows Update but cant see where it failed. Been checking the net for fixes but no luck. The machine is a Windows 7 SP1 Enterprise 32 bit, info for server if needed
is SCCM 2012 R2. I have attached the WindowsUpdate log, incase that can help? I dont want to spend ages removing previous updates (via SCCM) as I dont have the time!
Wont let me attach the windowslog!If any one can help, be great!

Hi,
Let's make clear your issue.
Did you logon these 3 computers?
Have you tried to install the Windows Update manually for these 3 computers?
If no, have a try.
If yes and the error still persists, try to
reset Windows Update components for test.
Karen Hu
TechNet Community Support

User Home Directory not being created when "Create Home Now" button hit...

This is a cross post, since I was not sure where this should end up since it touches two pieces- Open Directory and User Management. Any help would be appreciated!
I am running OS X Server 10.5. All of my user accounts have been migrated over along with their home directories. Problem is that when creating new users and then assiging a home directory the system does not actually create the directory.
Currently all users are setup to have their home directory setup here:
afp://172.16.110.100/Users/'username'. The Users folder has been setup to automount, and all users that have folders can be accessed without issue.
The problem is when I create a new user, select the aft://172.16.110.100/Users option and then select "Create Home Now" button and save as it requests... it does not create the directories.
I have even tried to change the Home patch to make it local to see if it was an network issue, and used the /Users choice and it will not create the directory in that way either- both location go to the same place.
The system was obviously able to create the local admin account and directory admin account home folders without issue when the system was installed.
The permissions for the "Users" folder are as follow:
directory admin = Read and Write
local admin= Read and Write
system user (root)= Read and Write
admin group= Read Only
everyone group= Read Only
The system is in production, so any kind of server resets need to be done after 5pm, so I have not been able to reset AFP service.
Currently the only services running are AFP, SMB and Open Directory.
All users have their entire home directories located on the server, and login over Directory Access on their clients, so all user accounts are stored on the server. No one is having issues accessing their files or logging in.
I just can not create new home directories when I create new accounts.

You do not have to be logged on as the root user to do this. Launch the terminal and type-
sudo createhomedir -a
I run an XServe with Tiger server ( 10.4.11) and this has been the workaround I have been using.
Good luck.

UDP traffic not hitting ACL when logged

Similar Messages

Maybe you are looking for