UDP wont read

Dear Labview experts,
I am always getting the error 1(invalid input parameter) whenever using UDP read function in my PC. I have tried using the UDP examples(UDp multicast sender and receiver) that came together with Labview but to no avail. My pc contains two network cards. Is that the reason why UDp read is not working. For other PCs with one network card, this is not a problem. UDp read works perfectly. Pls help. Thank you.

Why do you refuse th wire the "net address" input?? It is crucial if you have multiple interfaces!
To get ALL local interfaces, configure string-to-IP for multiple outputs (right-click...). Now pick the desired interface and wire it to the net address input as shown. See if things improve. (no guarantees).
If the PC can access the network, changes are that UDP works. You still might need to adjust firewall settings to allow incoming connections.
Message Edited by altenbach on 03-08-2009 11:59 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
MultiInterefaceUDP.png ‏12 KB

Similar Messages

No music in iTunes library and it wont read the content of my iPod? Help please!

So I recently updated to iTunes 10.7 and when I did, all of the content in the iTunes library was gone! i have tried many different things to get it to work, like restoring to a previous iTunes library, but it appears that all the previous iTunes libraries were also deleted when I updated! If there is no other way to get the music back than finding the original files and putting them into iTunes, I guess that will be ok.
The second problem I am having is that when ever I try to sync my iPod it takes a very long time to load, and then it says that iTunes can't read the content of my iPod and that I should restore to the factory settings, but because there is no music or apps in my iTunes library I dont want to do that, because then I will have no way of getting all of my content back on. And I can't restore to a previous backup because it wont read it as my iPod, it just comes up as an unkown iPod. This is very frustrating and I have tried everything I can think of. Please help!

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable and another USB port
- Reboot the computer.
- See if you can find the media by:
- See if a third-party progtam like one of those discussed here will allow you to get the music off the iPod
newer copy
- I think you may end up restoring the iPod.

Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it

updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.

Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried?

Itunes wont read iphone, thinks it's a digital camera...help

I dont know what happened, but when I first got my PC with vista 64, and had itunes installed with the iphone, everything worked. 3 days ago I reformatted my drives and reinstall windows and all my programs. I got itunes working with all my music and whatnot, but when I plug my iphone in to toss music on it, itunes wont read it. Windows knows it's there, but everytime I plug it in, the lower right hand corner the "windows is installing new driver blah blah" pops up, and then get an error message saying it couldnt install the driver. I go to device manager and windows thinks it's a digital camera. I did the whole update driver with the "c:\windows\system32\drivestore\usbaapl_" thing, and I got this message:
Windows found driver software for your device but encountered an error while attempting to install it.
(usb icon) Apple Mobile Device USB Driver
The system cannot find the file specified."
I have been googling the crap out of this and I am at wit's end with this. I've uninstalled/reinstalled itunes, cleaned registry, wiped all apple programs from the PC, anything google told me to, hahaha. Serious, I cant find any forum or web article to help me past this point. Please help...

I think I got it. I've had the same problem as you and many others. I went to device manager and found iPhone under imaging devices. Here's what I did:
Right-click -> properties -> driver tab -> update drivers (launches Hardware Update Wizard) select...
No, not this time (next) Install from a list ... (next) Don't search ... (next) Now there should be two choices under model. Select the Apple Mobile Device. This is not digitally signed so you'll get warnings but continue. When I did this iTunes picked up my iPhone right away.

I am trying to dowload pictures onto my macbook pro, but it wont read the USB adapter were all the photos are on?

Hey guys i got a macbook pro and this is the first incident that has happended to me sence i got it i cant figure out why it wont let me download pictures off my usb adapter it wont read it? help

So from your description, the drive isn't mounting on the desktop?
Open Disk Utility (Applications > Utilities), and see if the drive appears in the left pane. If it does, but it's greyed out, highlight it and wait for a few seconds - eventually the Mount button should become live - click it and see if that clears the problem.
If not, it's possible that the drive has been damaged, usually by removing it without unmounting (ejecting) it first.
If you have access to a Windows machine, it may be possible to mount it on there, eject it properly and try again on the Mac. This has been known to work reasonably frequently.

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this?

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this? and no, there is nothing wrong with the cards, they shoot fine, my dell inspiron 15 reads these cards fine, but yet my brand new macbook pro does not.

After many days of frustration, I try a stupid thing.... Put the SD card in the Lock Position and... Voilá!
The way I find to access the content is put the SD card in the Lock position..
Cheers

Itunes wont update on windows 7, ipod wont read on itunes

Hi, itunes wont update on windows7, and after unsuccesfull updates (several) now my ipod wont read on itunes, it does show up on windows as a driver, have researched this a lot ,getting weary now..have deleted affliliated apple files etc , reinstalled , have several issue messages, one warning was , please download manually , go to tools and download? how do i do this? cant find a toolbar for this download? please help.
had to upload this version of itunes 10.3.1.55, but it doesnt recognise my new ipod touch , is there a version except for the latest itunes that will read my ipod touch 4.3.5?

Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
Here's some more : Trouble installing iTunes or QuickTime for Windows

Itunes wont read or burn audio CD

Hello
Can anybody help me. I have Itunes with Win XP Pro and it wont read a CD, just keeps telling me to enter CD in Drive. I've run CD Diagnostics(there was an audio Cd in the drive at the time) with the following result, can anyone interrupt this for a numpty computer user like me and tell me what the problem is and what I should do?
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Compaq Evo N1020v
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: RADEON IGP 340M \RADEON IGP 340M
IDE\DiskIC25N040ATCS04-0______________________CA4OA71A, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskST9100824A____________0000, Bus Type USB
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________0110___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev 0110
Drive is empty.

Well, the CD diagnostics thinks the drive empty. What happens if you go to Windows Explorer with an audio CD in the drive and try to explore the CD? Do other applications, like Windows Media Player see the CD?
For reference, the support site for your computer is here.

PowerBook G4 wont read ex, HD, Ipod, Printer, Shufflel - ahhhh, help?

PowerBook G4 wont read external HD, Ipod, Printer, Shufflel - ahhhh, help?
Im not the whizziest on computers, other than lve tried a few things and nothing seems to work - lm open to any suggestions. Each external device makes sounds, which sounds like they are working fine, its just that all of a sudden, my mac wont read them?
xo :-/
laptop A1104 Mac OS X (10.4)

Well, Bluetooth has nothing to do with USB. (Unless you confused a wireless USB mouse with a Bluetooth mouse. Bluetooth mice require no adapters with Bluetooth built-in to our PowerBook model. If you were using a special adapter that plugs into your USB port in order to make your mouse wireless, then that is a Wireless USB mouse... which means that your USB ports are functioning in a way, but more malfunctioning than operating correctly).
Here are two places that repair logic boards that I know of:
1) http://macservice.com/powerbookg412.html
($495)
2) http://www.techrestore.com/xcart/home.php?cat=252
(choose your speed service, then indicate what needs to be replaced,
and it will tell you what the costs will be)
3) Apple Store Genius Bar
(make an appointment and have them diagnose it for "free" and let
them tell you what they think is wrong... BEFORE they take it in and
in turn, charge you for repairs. Usually a diagnosis at the Genius
Bar won't cost anything. If they take it in and pop it open to make
a full diagnosis, that's when the charge for labor comes in. The look-
over and pre-diagnosis is usually free... that way you can decide if
you want to repair, do something else like buy a new computer, etc.)
Are you still in warranty?
I wish I could've helped you more. We've gone this far. Last thing. Does your FireWire port work? And what about the other ports, like mini DVI, sound out, etc.? Ethernet?
(I'll be back later tonight).
Message was edited by: Pismo 900
Sorry. That's what the "D" option was according to the other manual I read on the internet. (I can't say it's name). If all else fails, that is the final step. A necessary repair of the logic board. (Odd that the Apple Hardware Test does not report any errors! It may not be necessarily logic board failure. That's why I recommend going to Apple... that is, if you have one near you. I have four close to me so I'm lucky. If you have the same luxury, get different opinions from each Apple Genius... trust me on that one).

I had bought an Ipod at a garage sale and my computer and itunes wont read it. can i reset it? to use it

This Ipod i bought at a garage sale for 25$. i went home and plugged it into my computer an it wont read on my computer at all wether its itunes or windows. what can i do to make it show on my pc. i tried to register it and it told me that its linked to another account how can i unlink it? im gonna let this note stand for about 2months then im gonna either resell it or throw the thing away..

Use iTunes to restore your iOS device to factory settings - http://support.apple.com/kb/HT1414 - "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS. Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info."
You may encounter problems fully restoring if Activation Lock is active - http://support.apple.com/kb/HT5818

Drive wont read any disc

Model: HPE-030sc
My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc.
When I push the F drive in my computer, it just says program could't be fund.
Anybody who can help.

Alfster76 wrote: Model: HPE-030sc My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc. When I push the F drive in my computer, it just says program could't be fund. Anybody who can help.
Hello Alfster76, Did you uninstall the DVD drive in the Control Panel, Device Manager, then reboot the system and see if it finds new hardware and installs the drivers for it?
Sometimes this works. If not, you might check the data and the power cables going to the DVD drive, just to insure they are properly connected.
If this does not resolve the issue, the DVD drive may have become faulty.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

IOs 4.2.1 from 4.2 on Ipod Touch 2nd Gen my car wont read my ipod

I just updated the 4.2.1 update on my ipod touch 2nd gen. I recently had the 4.2 update and it worked perfectly with my car. Now my car wont read it. I am trying to downgrade to any other ios in order to listen to my podcast. All the options online are for previously jailbroken ipods and i had never jailbroken mine. can anyone help me.

Thank you for your constructive response. I also have lost all my music after upgrading to 4.2. The official Apple solution is to sync again with the "computer you usually use to synch". That is quite impossible, since I am traveling away from home where the desktop is that is the usual sync connection. All I have with me is my MacBook Pro, which is also authorized for iTunes, but contains different music. The iPod Touch (2nd generation) shows about 4 gb of audio content, but starting the "Music" application gets a "no content" message.
Let's cut the unhelpful posts about forum rules and user agreements and focus on help for what is clearly a common problem for those who have upgraded. Thank you.

Siri Wont read my text!!

Hello all, When I get a text from Siri , and she lets me know i have the choices of reply or read it , she wont read it , how do you enable the phone to read the text messages?

Hi,
This might fix your problem:
Go on the Settings app > General > Accessibility > Speak Selection > On.
Now Siri should be able to speak your message. If this still doesn't work, you can go in your Messages app, double-tap the message that you want Siri to read, and tap Speak.
Franklin

Wont read sim after update

iphone 4 wont read a sim card after updateing to ios 6 plus

Okay - if the phone was an AT&T one & has an AT&T SIM in it, try reseating the SIM as outlined here.
What message do you see on the iPhone's screen?
You may want to take it to an AT&T store and get the SIM replaced, just in case your current one has issues.
~Lyssa

My iphone3gs wont read any sim card i put into it, is it the sim card reader? how do i fix it?

My iphone3gs wont read any sim card i put into it, is it the sim card reader? and how do i fix it? and yes the sim card matches the carrier

Possibly. Make an appointment at the genius bar and have them take a look at it.
If it was ever hacked to unlock it or jailbroken, it may now be permanently bricked.

UDP wont read

Similar Messages

Maybe you are looking for