Uek-rpm-config rpm similar to redhat-rpm-config ?

I'm new to Oracle Linux and have installed OL 6.2 and booted in UEK kernel 2.6.32-300.3.1.el6uek.x86_64.
I'm building the Qlogic FC driver qla2xxx against the UEK kernel using the spec file.
But the driver is built for kernel version 2.6.32-200.el6.x86_64.
This is because the macro %kernel_module_package in the spec file picks up information for 2.6.32-200.el6.x86_64 kernel.
Any idea if uek-rpm-config rpm is available similar to redhat-rpm-config so that the driver is built for the correct UEK kernel version.
Any other pointers on how to get this resolved.
Thanks in advance.

Here are some more details of what I’m doing and need more info about.
I want to update the qla2xxx driver, for new upcoming hardware, for UEK in Boot from SAN (BFS)
Environment.
For this purpose I’m using ddiskit, which is kernel driver update tool and can be found at below link,
http://dup.et.redhat.com/ddiskit/
Since Oracle Linux has two variants of kernels installed, in my case they are,
2.6.32-200.el6.x86_64 and 2.6.32-300.3.1.el6uek.x86_64.
Here the qla2xxx driver dd.iso is generated using ddiskit for 2.6.32-200.el6.x86_64.
Using this dd.iso I’m able to boot from a SAN disk.
Now I want to prepare the dd.iso using ddiskit for 2.6.32-300.3.1.el6uek.x86_64.
Here is where I need more info.
1. Can ddiskit be used for UEK kernel for BFS environment the way it can be used for Redhat Linux kernels.
2. If ddiskit is not supported for UEK then what is the recommended method to update the driver for UEK in BFS environment

Similar Messages

Replace a LM3905N with a similar IC (same pin-config.) for simulation in multisim

Hi,I want to replace a LM3905N with a similar IC (same pin-config.) for simulation in multisim.Have you any suggestion?Cordially,Richard

Hi e00ricaCuba
I can't really suggest anything to you from the top of my head. Have you tried checking with the manufactorer of the IC? For the LM3905N I belive National Semiconductors is the manufactorer.
Best Regards
David
NISW

Oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found

I just install jdeveloper10.1.3.3.0 4157, and test ,When I run test ,
display:"oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
Please help me how to solve this problem!

Just now I test jdeveloper 11g 4 preview
test project display log:
2008-6-15 22:38:14 oracle.security.jps.internal.config.xml.XmlConfigurationFactory handleLocation
警告: [XmlConfigurationFactory.handleLocation] Exception occurred when handling origLocation=/D:/jdevstudio11114949/j2ee/home/config/system-jazn-data.xml : no protocol: /D:/jdevstudio11114949/j2ee/home/config/system-jazn-data.xml
2008-6-15 22:38:14 oracle.security.jps.internal.config.xml.XmlConfigurationFactory handleLocation
警告: [XmlConfigurationFactory.handleLocation] Exception occurred when handling origLocation=/D:/jdevstudio11114949/j2ee/home/config/system-jazn-data.xml : no protocol: /D:/jdevstudio11114949/j2ee/home/config/system-jazn-data.xml
[JpsAuth] For permisson ( CredentialAccessPermission credstore.provider.credstore.ADF.anonymous#HR001 read), domain that failed: ProtectionDomain cs(file:/D:/jdevstudio11114949/BC4J/lib/adf-share-support.jar), []
BC4J Tester exit code(0)
Message was edited by:
user616170

Config.sh: line 29: /common/bin/config.sh: permission denied"

i want to Create Weblogic Domain for Identity Management
I start /app/fusion/fmw/wlserver_10.3/common/bin/config.sh, but it shows that "...... config.sh: line 29: /common/bin/config.sh: permission denied"
then I open config.sh, Line 29 as follow
"${WL_HOME}/common/bin/config.sh" "$@"
Edited by: 941252 on Dec 11, 2012 5:21 AM

login using admin user or the user which is used to install OIM.
or provide execute permission to the file like below
chmod 777 /app/fusion/fmw/wlserver_10.3/common/bin/config.sh

J2sdk 1.4, Redhat RPM, specify install directory?

Hi,
I need to install the 1.4 sdk to a software repository that requires I install it to '/usr/local/java', and the rpm installs to /usr/java. I tried using --relocate, but it says it's non-relocateable. How can I accomplish this? symlinks are not a viable alternative in this case!
Thanks.

Thanks for the reply. However, It appears that BOTH
downloads for redhat are, in fact, rpm's. Downloading
the tar file results in getting a '.bin' file, which,
when run, simply produces an rpm! ???Nope... the one you want is a download from the row "Linux GNUZIP Tar shell script". That one will, when run, create a directory in the current directory called j2sdk1.4.0. :-)
It's not Red Hat specific, but there should be no problems getting it to work in Red Hat.
Bhav

Bundle rpm install type AUTO, still issues rpm -i --force?

Hi Guys,
Has anyone experienced the same issue?
We install exactly on rpm with a bundle, the freshen type is set to "No",
the "install type" is set to "Auto", so I would expect (according to the docs)
packages with conflicting files not being installed.
Unfortunately I was proved wrong and the package was installed.
br,
bernhard
PS: novell-zenworks-version-11.2.1-6382 on RHEL5.7

bfurtmueller,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Can I replace the 5400 RPM drive with a seagate 7200 RPM drive in a Lenovo B570

Hi there,
I have a Lenovo B570-1068AFU system that comes with a 5400 RPM HDD. Does this system suppor 7200 RPM HDD upgrades? I would like to replace the current 5400 RPM with a segate 7200 RPM. Possible?
Thank you for all your replies.
Solved!
Go to Solution.

To add a little to what Tanuj said, you may have a (fixable) issue when moving to the new drive.
Depending on when your laptop was built it may have a legacy (512-byte sector) or Advanced Format (4k-byte sector) hard drive. Many/most larger drives on the market are AF. If you migrate from legacy to AF, you may notice that Windows Update has stopped working. Windows 7 is supposed to handle AF drives correctly, but there are many cases where it doesn't until updated, or an additional driver is installed. The situation is worse with XP, but also fixable.
You may well not have any problems with this, but if you do I have some notes and links to fixes over here:
Windows Update Broken After Cloning Hard drive
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Enabling ssh with a startup config or similar?

Hello,
Im am currently testing the new features of IOS 12.2 55 SE1 called "Smart Install".
I got it working even though it still has many issues but that's probably because it is a very new functionality.
Anyways, we are using it currently in a lab-environment to test the "zero-touch" replacement of defective Switches. In that case the Director of the SI Network knows what config the defective Switch has saved last.
It then uses that exact config to deploy to the replaced switch as a startup config.
For Security Reasons we have the command "transport input ssh" on all lines enabled. (Makes sense if you want to shut out telnet).
Now, when the new Switch receives the IOS Update (which is also delievered in Smart Install) and therefore reboots, it now uses our startup config.
With the above mentioned command "transport input ssh" on the lines, we have no way of connecting to the newly replaced switch.
"Crypto keys cannot be generated on startup" is the message I see on the Serial-Console output.
Has anyone got an idea how we could work around this?
Is there a way to tell a switch he has to generate an rsa certificate to enable ssh without "touching" it?
I know that with the command "transport input all" this issue would not be an issue, but that is not an option for a possible productive Release. Since we are using a config of a switch that was running productively, the running config cannot allow telnet to be used..
I have asked Google, used this forum's search functionality and found nothing. I am absolutely sure though, that this is an issue many Cisco Users have to work with, so I was suprised not to find anything.
Details of our lab:
Director Switch: C3560 with IOS 12.2 55 SE1
Client Switch (to be replaced): C2960 IOS 12.2 55 SE1
Both have the crypto-image installed.

Hello Richard,
Thanks for your answer.
Smart Install gets the config to the new switch by telnet. Since a factory-new Switch can do telnet, the initial config comes from the director. It connects to the switch over a non-standard telnet port and issues the copy command to get the startup config from the tftp server. After that it does the same with the IOS. We can't really do anything because every interaction with the new switch stops the smartinstall process.
In your desscribed solution (I will test it later this week) it could be a working solution for deploying new switches.
In my Scenario however there currently seems to be no way to enable ssh when the startup config is the last known configuration from the switch that died, beacuse this startup config we cannot manually edit (it would defeat the purpose of this feature), since it is backed up by the director and the logic of deciding wheter or not this config is to be used runs on the director.
I am in contact with "our guys" from cisco, and they are trying to get feedback from the developer team of this feature. I will keep testing new releases for this issue and will report any progress.

Config.saveNew() is not saving new config hdr id inside CZ_CONFIG_HDRS

Hi,
I am trying to create a new configuration using CIO something as below.But I see that api is returning new configuration hdr id but i dont see that id in CZ_CONFIG_HDRS table.Here is sample code inside java concurrent program.
// Create the Configuration object
Configuration config = cio.startConfiguration(cp, context);
config.completeBeforeSave();
config.saveNew();
ong headerID = config.getConfigHeaderIdLong();
long revisionID = config.getConfigHeaderRevisionLong();
cio.closeConfiguration(config);
Am I missing anything.Why this code is not saving new config hdr id inside the table CZ_CONFIG_HDRS. Please suggest if anything is missing here.
thanks,
ashok

I have done something similar and followed your approach.
The only real difference I see is that after "closeConfiguration(config)", I had these two lines:
context.releaseJDBCConnection();
context.free();
This was over a year ago and it was only a proof of concept. But I do recall that my test code was properly generating the record in CZ_CONFIG_HDRS. Perhaps these two additional lines would enforce the "commit" of the records. It might be worth a try.
Thanks,
Jason

Is it possible to create a cisco config file based on a polycom config file?

Hello,
We have 12 spa509g phones that are barely working with our provider (voxox).
My provider gave me the config files that are used to set up polycom phones as those are the only phones they support.
Features that currently work: incoming calls, outgoing calls, blind transfer, voicemail, call hold
Features that do not work: call presence - solid orange lights, attended transfer, paging
I've upgraded the firmware to 7.5.6 and configured the phone through the GUI as much as i can but I can't seem to enable the above features.
Any help would be highly appreciated as I'm about to buy polycom phones if we can't figure the configuration out.
Attached are the configuration files from voxox concerning polycom phones. confidential data says "removed"
If anyone thinks that this is possible, I can send a copy of my current cisco configuration file.
Thanks,
Philip

Well, I have no polycom phone, not I have personal experience with voxox. I wish the following document may help a lot - it describe Polycom configuration somewhat. As you have no Polycom, you have no current <mac>-directory.xml. So you don't know the device name you should subscribe to. But it seems to be a DID-number.
Just try it.
On the other side, ask Voxox for help. Don't ask for configuration files, ask for configuration instructions expressed in terms of the SIP protocols. Consider switch to more friendly and technically skilled VoIP operator if they will not understand what the SIP stand for ...
By the way, wrong forum. Your issue has nothing to do with XML Phone Application interface. I'm not sure someone will respond you here.

Difference between standard-faces-config.xml and /WEB-INF/faces-config.xml

Reading standard config org/apache/myfaces/resource/standard-faces-config.xml
Reading config /WEB-INF/faces-config.xml
Iam getting these in tomcat server,iam using netbeans5.5.1
Can any one tell me the difference between the standard-faces-config.xml and the /WEB-INF/faces-config.xml
because i find some repeatition
06-Oct-2007 09:25:19 org.apache.myfaces.webapp.StartupServletContextListener initFaces
06-Oct-2007 09:25:19 org.apache.myfaces.webapp.StartupServletContextListener initFaces
INFO: ServletContext 'C:\jsfprogrammes\HiTech\build\web\' initialized.
06-Oct-2007 09:25:19 org.ajax4jsf.cache.CacheManager getCacheFactory
INFO: Selected [org.ajax4jsf.cache.LRUMapCacheFactory] cache factory
06-Oct-2007 09:25:19 org.ajax4jsf.cache.LRUMapCacheFactory createCache
INFO: Creating LRUMap cache instance using parameters: {org.apache.myfaces.CHECK_EXTENSIONS_FILTER=true, org.apache.myfaces.DETECT_JAVASCRIPT=false, org.apache.myfaces.ENABLE_CLIENT_SIDE_VALIDATION=true, org.apache.myfaces.SECRET=NzY1NDMyMTA=, org.apache.myfaces.VALIDATE=true, net.sf.jsfcomp.chartcreator.USE_CHARTLET=true, org.apache.myfaces.ALLOW_JAVASCRIPT=true, org.apache.myfaces.PRETTY_HTML=true, org.apache.myfaces.AUTO_SCROLL=true, javax.faces.STATE_SAVING_METHOD=server, org.apache.myfaces.redirectTracker.POLICY=org.apache.myfaces.custom.redirectTracker.policy.FullRedirectTrackPolicy, org.apache.myfaces.ADD_RESOURCE_CLASS=org.apache.myfaces.renderkit.html.util.DefaultAddResource}
06-Oct-2007 09:25:19 org.ajax4jsf.cache.LRUMapCacheFactory createCache
INFO: Creating LRUMap cache instance of default capacity
06-Oct-2007 09:25:19 org.ajax4jsf.cache.CacheManager getCacheFactory
INFO: Selected [org.ajax4jsf.cache.LRUMapCacheFactory] cache factory
06-Oct-2007 09:25:19 org.ajax4jsf.cache.LRUMapCacheFactory createCache
INFO: Creating LRUMap cache instance using parameters: {org.apache.myfaces.CHECK_EXTENSIONS_FILTER=true, org.apache.myfaces.DETECT_JAVASCRIPT=false, org.apache.myfaces.ENABLE_CLIENT_SIDE_VALIDATION=true, org.apache.myfaces.SECRET=NzY1NDMyMTA=, org.apache.myfaces.VALIDATE=true, net.sf.jsfcomp.chartcreator.USE_CHARTLET=true, org.apache.myfaces.ALLOW_JAVASCRIPT=true, org.apache.myfaces.PRETTY_HTML=true, org.apache.myfaces.AUTO_SCROLL=true, javax.faces.STATE_SAVING_METHOD=server, org.apache.myfaces.redirectTracker.POLICY=org.apache.myfaces.custom.redirectTracker.policy.FullRedirectTrackPolicy, org.apache.myfaces.ADD_RESOURCE_CLASS=org.apache.myfaces.renderkit.html.util.DefaultAddResource}
06-Oct-2007 09:25:19 org.ajax4jsf.cache.LRUMapCacheFactory createCache
INFO: Creating LRUMap cache instance of default capacity

I just said that it is not necessary to add something special to faces-config.xml in order to get JSF works in portlet environment. I successfully use JSF with WSP and JBoss Portal (MyFaces).
MyFaces has own implementation of bridge called MyFacesGenericPortlet while for Sun RI you have to use JSF Portlet Bridge. JSF Portlet bridge can be used with MyFaces as well.
Such a bridge invokes lifecycle.execute or lifecycle.render to execute JSF phases depending on request. So all phases or Render Response phase is invoked accordingly.

Transparent Mode - running-config are not saved to Startup-config, Normal ?

I config a switch to be a Transparent Mode, then I issue the copy run start command, then I issue the show start-up command, however the Running-config is not copy to the start-up config
Is it Normal for the switch ???
vtp mode transparent
int fa0/1
switchport mode access
switchport access vlan 5
int fa0/2
switchport mode access
switchport access vlan 6

Hi,
If you use transparent instead of server or client, there should be no problem wit copy run start. (The difference is that in this case your switch doesn't participate in the VTP communication, only forward the received messages and doesn't update its vtp db).
During the copy running-config startup-config did you get some error message? (not enough space or something) PLease first check the flash with the show flash command.
Or try to save your running to flas not to startup config: copy running flash:test.cfg
If you need more help please send me output of show flash at least...
bye
FCS
Please rate me if I helped.

SAPSR3DB of Config Tool getting Locked While Launching Config Tool

Hi ALL
Although it was unlocked at the DB Level EACH Time,
The SAPSR3DB User gets locked EACH time I launch the Config Tool and I need to find out why / rectify it .
Any Input on this strange event ?
Thanks a Lot,
Regards,
- Ishan

Thanks, Tom!!
I had checked it and again I have doublechecked that the Uname and PW i.e. JAVA Schema User ID and it's PW is correct.
But, I am still facing the same problem
Regards,
- Ishan

GPO under user config - but to apply to computer config - Group Policy

Hi, I would like to create a GPO in User Config, but would like to filter it only to Windows 7 machines (WMI). I have the WMI created, do i apply a loopback (merge) to the GPO Settings to get this to work? I dont want this to push onto servers only Windows
7 machines, and the GPO is at the top level.
GPO - 2008 R2
Windows 7
Thanks in advance,

Yes, loopback merge with Windows 7 WMI filter but still suggest linking it to testing OU with Windows 7 and other OS to test

Converting OKEW from a config t-code to a non-config t-code

I need to allow users to maintain info in t-code OKEW in a PROD system... scary I know.
OKEW - by default - prompts for a transport when maintaing entries. I need to allow users in our TEST and PROD to maintain these entries without transport.
I have references throughout the Web mentioning this... but I have not seen a true solution.
Please note that I ONLY want to allow maintainence for THIS t-code.... not ALL t-codes.
Points will certainly be awarded.

Please bear in mind that SCC4 is not an option. This has to be t-code specific... not client specific.

Uek-rpm-config rpm similar to redhat-rpm-config ?

Similar Messages

Maybe you are looking for