Ugh..pictures show up as blocks when published

So I am moving along nicely with my project (so I think), everything looks fine when I preview it (f8), but decided to publish it for a first hand look and many of my pictures just show up as red blocks where the pictures should be. I tried both chrome and ie8 to rule out a browser incompatibility. I published to a folder on my desktop, also upon a republish some pictures the problem went away, others in remained.
Here is what I have.
This is what the slide looks like in preview mode, or when I am working with it in captivate
This is the same slide when I publish it - There are many pics throughout the presentation that are doing this.....
Any ideas would be great...thought I was almost done with this but now I am getting nervous.

Just one thing: Applying slide quality settings using the slider under Preferences > Project > SWF Size and Quality will mean that you lose the ability to set individual slides to different quality settings according to need. So if only a few slides in your project were affected by this issue and required to be set to higher quality, you might be sacrificing published file size for no reason by setting ALL slides this way. So try using the Retain Slide Quality Settings option on this same preference section and then set ONLY the slides showing these red graphics to High Quality (24bit). That way you can resolve the issue without adding too much file size.

Similar Messages

When i open a file the pictures show at bottom, but when I click on a pic it only shows a triangle with a ! in the center

when i open some files the pictures show at bottom, but when I click on a pic to open it only shows a triangle with a ! in the center

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why my child or subpages not showing in preview or when published?

Why are my child or subpages not showing in preview or when published?

Hi,
Are you unable to see the child pages in the Menu? If yes, please make sure you select "All pages" in the Menu type dropdown. By default, "Top level pages" is selected.
Cheers!
Aish

Picture shows in library but when i open develop it shows a blue screen with a diaginal cross

picture shows in library but when i open develop it shows a blue screen with a diaginal cross

Go to the Preferences>Performance tab and uncheck the "Use Graphics Processor" option. Adobe are aware of this issue, and are investigating, but in the meantime unchecking that option should sort out your Develop module issues.

Make a picture fit the full screen when published?

I can´t seem to get my picture to fit the full screen when I publish it. There are some alternatives.
To drag the picture into the canvas and enlarge it.
Drag it into the Page background or drag it into the web browser background. Iv tried them all and they look allright in iWeb but there are gaps in every direction when published to the web.

See, that leads us to my second problem. I have a trial period on .mac and when I uploaded some wavs, the disk space quickly ran out. I erased the wavs but the space used is still the same. Is there a way to empty the cache so I dan show it to you.
Thanks for the quick reply, by the way.

HT204291 picture shows on my tv when but sound comes through the mac

Can you help?
When I switch on airplay mirroring through my mac book the picture shows fine but the sound comes through my mac and not the TV. Any suggestions?
Thanks

The mac can output sound as an electrical signal or optical from the Audio Out port (the headphone port). You can decide which kind to use based on what your TV takes.
If it has RCA inputs then you should use a cable that is 1/8" jack-to-RCA. :
If the TV has SPD/IF inputs then you will want to get an optical cable (SPDIF on both ends and get the 1/8" adapter):
I hope this helps

Why does someone else's picture show up as me when messaging?

Why does someone else's picture show up as me on I pad when messaging?

Sounds like some of the templates provided by apple. Google lorem ipsum for info on the filler text used.

I bought and downloaded the latest snow leopard and lost most of my pictures and most of my i tunes music. The pictures show in iphoto but when i try to open them I get a big "!" and when my music shows in Itunes but when I try to play it, it wont open

I need help... Since downloading the latest snow leopard, I cant open most of my pictures in iphoto or play most of my music in Itunes.

Before you bought Snow Leopard, did you check that your machine met the specifications? Have you enough memory, ideally you need 4GB though 2GB is okay,
Have you also applied the various software update updates which include iTunes and security updates.
Check in the Apple menu, about this Mac, and if your new disk shows as being 10.6.3 this is what to do.
Once you have upgraded to Snow Leopard, if your upgrade took you to 10.6.3 you will need to apply the Combo updater. Mac OS X 10.6.8 Update Combo v1.1 and follow with a software update to pick up the most recent security and iTunes updates.
Regards

Using my Iphone5, i would like to make a full screen picture show on the screen when someone is calling me. How do I go about that?

how do I do this?

With the current version of iOS on an iPhone there is no way to have a full screen contact picture. You can make a suggestion to Apple at http://www.apple.com/feedback/

Macbook pro 15 shows random colored blocks when I open FaceTime

I'm having display anomoly issues when certain applications are open.
- faceTime
- photoshop CC

Hey bobbydombrowski,
Thanks for the question. I understand you are having issues with the video behavior on your internal display. The following article may help to resolve the issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Quotes and apostrophes show as question marks when published to my server

imac intel core 2 duo 24" Mac OS X (10.4.9)

Miss Laverne, there is an "invisible" file called .htaccess that you can modify. It is a simple text file so if Fetch has a preference setting for viewing "invisible" files, you can see it. If it is not there, you can make one.
Reason I know this is that I had a similar problem on my server, and modifying my .htaccess file solved it. UTF-8 encoding was the problem.
Study up on .htaccess; there is info all over the internet.

Contact picture showing in landscape

After adding contact picture in contact list while dialing contact no picture showing in landscape mode

But when you initiale a call to someone,the dialer is in normal view,not horizontal.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark.

I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark. Did I loose those pictures or is there a problem with iphoto

How about the most likely occurance - something incorrect about how the iPhoto library was transfered
What version of iPhoto '11 (9.4.3 is the latest)?
exactly how was your iPhoto library transfered to your new hard drive
This indicates that there is a problem in the iPhoto database - a possible solution to try is Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
Why did you get a new hard drive? What kind of backup do you have?
LN

Report works fine in VS2010 but simply doesn't show when published

Problem:
Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
Background:
Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server. IIS 6 is running. My web-server and VS2010 is on the same box.
I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on) on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet). I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue on the dialogue box that comes up because of the hiccup will allow testing to continue. Here's a screen-shot of this recurring hiccup.
http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt file. I solved this by setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source' did i see some remnants of the crystal report viewer.
Here is the Report.aspx page when tested in VS2010:
[http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
[http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
Details of adding report to my web app:
1) Populate my dataset then write the XML schema, reportschema.xml
2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
[http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
3) I formatted the report the way i wanted it
4) Added the Crystal report viewer on the Report.aspx page
5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
That's it. As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
However, the issue is limited to compile time and does not affect a completed application.
Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
"I proceeded to try to browse to my app from another computer on my network."
This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
Ludek

When I try backing up to icloud it says that I have gone over the free 5gb. It shows that I have 4.6 gb of pictures in my camera roll when I barely have over 200 pictures! Any similiar problems or possible solutions?

When I try backing up to icloud it says that I have gone over the free 5gb. It shows that I have 4.6 gb of pictures in my camera roll when I barely have over 200 pictures! Any similiar problems or possible solutions?

You're welcome. Given the number of people who seem to have problems restoring photos from their backup I wouldn't trust the iCloud backup for my photos anyway. I always import them to my computer at least weekly. That way I know I have them.
You might want to check out the app PhotoSync. It makes this pretty easy as it transfers them to your computer wirelessly and keeps track of which ones have already been transferred.

Ugh..pictures show up as blocks when published

Similar Messages

Maybe you are looking for