Ugrent --CUCM Upgrade 8.6 to 10.5 issue

Hello all,
We have upgraded CUCM from 8.6 to 10.5 (direct upgrade).
After upgrade we cant make changes into CUCM Publisher. While adding phones or device profile we are facing following error:
Add failed. The Insert privilege is required for this operation.
Also, our Cisco Unified Attendant Console Enterprise Addition sync with CUCM is not successful.
CTI RoutePoint & CTI Ports are not registered gone into unknow state.
Attached are Attendant console enterprise CUCM sync reports screen shot.
DB Replication for whole cluster is good with value 2.
Need urgent help - our system is in production now & we dont have cisco support agreement at the moment.
Regards,

Here are the install logs:
admin:file view install system-history.log
=======================================
Product Name - Cisco Unified Communications Manager
Product Version - 10.5.1.10000-7
Kernel Image - 2.6.32-431.3.1.el6.x86_64
=======================================
09/12/2014 22:16:31 | root: Install 10.5.1.10000-7 Start
09/12/2014 15:45:21 | root: Boot 10.5.1.10000-7 Start
09/13/2014 02:17:53 | root: Install 10.5.1.10000-7 Success
09/13/2014 02:17:54 | root: Boot 10.5.1.10000-7 Start
09/13/2014 02:41:59 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
09/13/2014 02:55:15 | root: DRS Restore UCMVersion:10.5.1.10000-7 Error
09/13/2014 03:06:55 | root: Boot 10.5.1.10000-7 Start
09/13/2014 03:16:24 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
09/13/2014 03:55:07 | root: DRS Restore UCMVersion:10.5.1.10000-7 Success
09/13/2014 03:59:19 | root: Boot 10.5.1.10000-7 Start
09/13/2014 06:16:40 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
09/13/2014 06:21:33 | root: DRS Restore UCMVersion:10.5.1.10000-7 Error
09/13/2014 09:31:10 | root: DRS Backup UCMVersion:10.5.1.10000-7 Start
09/13/2014 10:09:25 | root: DRS Backup UCMVersion:10.5.1.10000-7 Success
09/14/2014 12:38:48 | root: Restart 10.5.1.10000-7 Start
options: q=quit, n=next, p=prev, b=begin, e=end (lines 1 - 20 of 21) :
admin:
admin:

Similar Messages

CUCM upgrade from 7.1.5 to 10.5.1.10000-7

Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.
The reason why I preferred because this jump upgrade we can achieve in isolated network.
In that case can anybody please help to get specific document for that. Kindly have a look on this case.
Regards,
Abi

You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
Please refer to the vide below.
https://www.youtube.com/watch?v=JzG4kz1_hL4
All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

CUCM Upgrade from 8.6(2a) / 8.6.2.20000-2 to 8.6.(2a)SU2 (8.6.2.22900-9)

I'm getting ready to upgrade a client's CUCM cluster from 8.6(2a) / 8.6.2.20000-2 to
8.6.(2a)SU2 (8.6.2.22900-9). They use extension mobilty with UCCX version 8.5.1.11003-32.
Does anyone know of any issues with ugprading this cluster vis a vis their UCCX version ?
The current CUCM Version 8.6(2a) / 8.6.2.20000-2 shows a JTAPI shows the following JTAPI version:
admin:show packages active cm-jtapi-
Active Side Package(s): for cm-jtapi- package(s)
cm-jtapi-plugin-8.6.2.10000-2
From the ReadMe For Cisco Unified Communications Manager Release 8.6(2a)SU2
http://www.cisco.com/web/software/282074295/93949/cucm-readme-862asu2.pdf
I see that it shows:
cm-jtapi-plugin-8.6.2.10000-10.i386.rpm
Once I have performed the CUCM upgrade - do I need to upgrade the JTAPI plugin on the UCCX Platform?
TIA

Mohamed,
I have not actually peformed the upgrade yet. If you have done so - please reply with any lessons learned that you have.
I would upload the file to all the servers in your cluster prior to your upgrade maintenance window. This should not be service impacting.
Then during your upgrade maintenance window -
Step 15 Once the Publisher and the subscribers have been upgraded, a version switch must be completed so the servers reboot to the new upgraded partition as follows;
Web Browse to the Publisher’s OS Administration GUI
To restart the system and activate the upgrade, choose Settings > Version; then, click Switch Version.
The system restarts and should be running the upgraded software. Once the Publisher is accessible, proceed with the subscribers.
Good Luck,
Amir

CUCM upgrade 8.6 to 10.5 7500 user OVA

Hello,
I'm planning a CUCM upgrade from version 8.6 to 10.5 (both virtualized) This was deployed using the 7500 user OVA. In 10.5, the HDD requirement has changed from 2x80 to 1x110. According to the upgrade guide, I can resize my drives using disk expansion COP file. My question is, what should the end result be of my drive changes? Do I change both drives so I end up with 2x110 or do I only change one leaving me with 1x110 and 1x80?
I don't have enough CPU resources to create new VMs and migrate using PCD.
Thanks,
Glenn

Hi Glenn,
My understanding is that the COP file is used to regain used space within the VM in the sense that you do not have enough space to proceed with the upgrade to 10.5. The COP file essentially removes your inactive partition in order to gain that needed space. As long as there is enough free space to complete the upgrade I wouldn't modify the drive structure of the VM in question.
Hope this helps
Tony
Please rate helpful posts

UCCX After CUCM Upgrade

Hi All
I am running UCCX 8.5.1.11004-25 and upgrading to CUCM 8.6.2.23900. I have completed several CUCM upgrades with various dependencies but never with UCCX as a dependency. I have checked the compatibility matrix and this all seems fine however i cant find any information on if anything needs to be done to UCCX once i switch versions on CUCM.
Im suspecting that i will need to run a JTAPI re-sync which will download a new JTAPI if it finds a different version ? Is this correct and also is there anything else i need to be watching out for ?
Thanks, Carl Ratcliffe

Thanks Tanner, quick reply and confirmed what i thought, just didnt want to get caught out at 2 in the morning with something i have missed.
Thanks, Carl

ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1

Hi All,
I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso
So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
Thanks
Yury Brodsky
Telecommunications Specialist
AudioCodes
27 Worlds Fair Drive
Somerset, NJ 08873
Direct: 732-652-2162
Fax: 732-469-2298
Email: [email protected]

Upgrading co-res CUCM should have upgraded your ELM as well. It should now show as Prime License Manager when you log in. I'm guessing you just don't have any CUWL 10.x licenses installed. Can you attach a screenshot of the License Usage page in PLM?
You may need to email [email protected] to move your 9.x licensing to 10.x licenses.

CUCM upgrade in UCCE environment

We have a CUCM cluster(v6.1.2) for our UCCE environment (ICM v7.2.5). I need to upgrade the CUCM to version 6.1.3 (due to the DST bug). Can someone tell me which components in UCCE that I will need to upgrade and/or modify for this CUCM upgrade? Or at least point me to a document that outlines this?
thanks,
Brian

You would probably have compatibility without any UCCE change, but the recommended task is to download the updated JTAPI Client plugin from your upgraded CUCM and overwrite what is there on your PGs.
That is all.
Regards,
Geoff

CUCM Upgrade 7.1.5 to 10

Hi All,
We are planing to do a 4 server CUCM upgrade (physical to VM) from ver 7.1.5 to ver 10. Below is the plan
- Upgrade the CUCM on current MCS servers to ver 9 (bridge upgrade) and take a DRS backup
- Install CUCM ver 9 on VM and perform the backup restoration
- Then upgrade to CUCM ver 10
I have one question on this. After I have done the bridge-upgrade on current MCS servers is it still possible to switch-version the CUCM and get CUCM back to ver 7.1.5?
Thanks

When you initiate the upgrade, you can indicate to activate the partition with the new upgrade software or return to using the partition with the previous version of the software at upgrade completion. With the exception of HP 7825H3 and HP7828H3 hardware upgrades, the previous software remains in the inactive partition until the next upgrade. Your configuration information migrates automatically to the upgraded version in the active partition.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/9_1_1/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91_chapter_01.html#CUCM_RF_S5
600AEB_00
HTH
Manish

Does an CUCM upgrade affect the device defaults?

Hello
we intend to do an CUCM upgrade from 9.1(2) to 9.2(2)SU2a.
However, our phones have the firmware 9-4-2-1S, different from the original firmware (9-3-1-SR2-1)
After the CUCM upgrade, will the device defaults get back to its original firmware version (9-3-1-SR2-1) or the current version will be kept?
Thank you
Marcos

Hi Marcos,
Yes, When you upgrade to a newer version of CUCM the phones will upgrade/downgrade to the Firmware version listed in the readme doc for the CUCM upgrade version as I have linked below. So in your case the the CUCM readme for 9.1(2)su2 is shown here;
http://www.cisco.com/web/software/282074295/116350/cucmreadme912su2a.pdf
In 9.1(2)su2 it looks like the Device defaults would be 9.3(1SR4.1) but it looks like the Device defaults in CUCM 9.1(2)su3 would be the same as what you are currently running so you would be good to go as they are 9.4(2.1) ;
http://www.cisco.com/web/software/282074295/122683/cucm-readme-912su3.pdf
You could also copy the current device defaults into something like notepad and re-enter them after the upgrade, but if it were me, I would go with the later CUCM version 9.1(2)su3.
Cheers!
Rob

Screen saver won't start since Lion upgrade. Two different machines, same issue.

Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith

HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify. It is as if airplay is not runing. A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
I have verified that my iPad mini and apple TV is up to date.
Airplay enabled, the network is connected with internet.
It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software

My iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

my iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

Settings>General>Reset>Reset all settings.
*Note:* Settings, preferences, network settings, etc *will* be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF)
If you want to voice your opinion, please do so here:
http://www.apple.com/feedback/

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and           click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.

UWLJWF upgrade from EHP1 SPS6 to SPS8 issue, Oracle and windows 2008

Hi,
I am trying to upgrate this component UWLJWF in our production system and i get an error:
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_SUBSTITUTE >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_SUBSTITUTE >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 ora-Info: compareTo PROFILE: column length 127 larger than length 84 of target column
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE to type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE to type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Action: CONVERT
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Action: CONVERT
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Table has to be converted
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Table has to be converted
Jul 30, 2011 8:55:13 AM Info:
Jul 30, 2011 8:55:13 AM Info: E R R O R ******* (DbModificationManager)
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Error: Table KMC_WF_SUBSTITUTE: Conversion currently not possible
Jul 30, 2011 8:55:13 AM Info:
Jul 30, 2011 8:55:13 AM Info: E R R O R ******* (DbModificationManager)
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Error: Table KMC_WF_SUBSTITUTE: Conversion currently not possible
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Next archive object : KMC_WF_TEMPLATES.gdbtable
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Next archive object : KMC_WF_TEMPLATES.gdbtable
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_TEMPLATES >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_TEMPLATES >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: No action required for table
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: No action required for table
We have tried to apply note 1442501 but we still get the error. We have upgrade all our landscape without any issue, of course this issue is in our production system. If you have any suggestions, that would be great.
Thanks
Jean Seguin

Hi Jean,
Did you delete the table KMC_WF_SUBSTITUTE from the database directly and retry the update?
Also try updating only the UWLJWF first after dropping the table, as suggested in the blog:
http://joeysbasisblog.blogspot.com/2011/04/jspm-error-in-upgrading-uwljwf-to-7017.html
Regards,
Srikishan

CUCM upgrade 8.6 to 10

Hi
will update the version 8.5 to version 10
I have a question I hope you can help me.
I can directly upgrade from version 8.5 to 10
Upgrade to version 10 first I have to upgrade to version 9?
I need licensing for the upgrade? If yes, what kind of licensing need
if I have a CCX CUCM version 8.6 and version 10, can be operated simultaneously or me creates problems ??
it is necessary that all virtual machines (CUCM, IM, PRESENCE, CCX) run the same version is ccx CUCM 10 and 10.
are the procedure for good update.
Some documentation to recommend me.
I am at your service.
Greetings.

The upgrade guide and compatibility doc for 10.x cover upgrade paths
Your licenses will be migrated to PLM, you can reach [email protected] if you need further assistance
The UCCX compatibility matrix covers all the details about UCCX version and CUCM compatible releases, you need to review it.
CUCM and IM&P need to be in the same major release, at the X.Y level in most releases, except 10.5(2) which is only compatible with 10.5(2). As for UCCX, see above.
For the upgrade you need to review for every product:
A) RNs
B) Upgrade guide
C) Changed and new info doc, either as standalone or sometimes with the RNs
ALL the above information is available on cisco.com for you to review.

** Ugrent --CUCM Upgrade 8.6 to 10.5 issue **

Similar Messages

Maybe you are looking for

Ugrent --CUCM Upgrade 8.6 to 10.5 issue