Uh I Think I Did Something Crazy

Ok here's the scenario. I saw two emails listed in the Hub from my designer and decided to read the first one. I was then replying to her first message and it became sent prior to finishing my message composition. So you know how it takes awhile to actually send a message (5-7 seconds), well I took that opportunity while the message was sending to try and halt the message.
I highlighted the message while it was in the middle of sending but prior to the check mark icon and what happened was that the second email from my designer became deleted instead of the sending message. It did not even ask me for delete confirmation. I then looked for the second email everywhere and it was vanished into thin air. I mean it was no longer on the mail server or in the Trash folder or in any other folder for that matter.
What the heck is going on here? Is this a bug?

JamesDee55 wrote:
This hasnt happened often, but it has happened enough to annoy me.. When in my email box, in the Hub, I go to delete 1 email, which I have 2 seperate emails. and not only does it delete the email I wanted to delete, but it will delete the other email also, for no reason whatsoever. ( I have a Z10 )
And no, I didnt select "select more" to perform a multiple email deletion.
This has probably has happened about 6 times in as many months..
Yes that's what happened!
I had two separate emails and Z10 deleted one I did not even select.
That would not have been so bad if the deleted message went to the Trash folder instead of becoming permanently deleted without even a delete confirmation.

Similar Messages

I think I did something weird with foundation/server patching

We've built many SP sites over the last 3 years. We're now moving in to 2013. most of our sites are 2010.
For the old sites, both myself and my colleagues were just learning on the fly how to deploy and patch. Over the years we've gained a better understanding of both.
Something I've done though in the past, i don't know how it affects the deployments and I was wondering if someone could shed some light on it.
We used SharePoint server with internet, mostly. When patching, we saw that there were two sets of patches, foundation and server.
We didn't have a full understanding of both but now do. They are stand alone products. However, we though they were component levels of the same installation, and for years we've been applying both the foundation patches, and the server patches
right behind that. It's worked fine. We've never received any errors about patching.
Now that I know better, i'm only deploying server patches to the new 2013 deployments.
I was asked to add a 3rd server to one of our old farms. I ran in to a patching mismatch warning when trying to join the farm. This made me think about how we patched foundation and server even though we're running server. One of the warnings
was that those foundation patches were missing.
So I restarted and used the exact same patches and it worked fine. Still, i'm wondering what the overall impact of our old patching methods has on the product?
My hope is that everything in SP foundation is part of SP server, so the patches I made, assuming the same level of patching, only duplicated patching effort, and there are no technical drawbacks to having patched foundation then server on the same environment.
Anyone know?

Hi,
There are some different patches for SharePoint, to better understanding the different patches, I think you can have a look at the following articles which contains the different patches in SharePoint.
Hey! Should I install this SharePoint patch?
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=433
For example, the “cumulative” part means if you install the August 2012 CU you don’t need install the June 2012 CU first.
CUs are also cumulative in the sense that the SharePoint Server patch includes the patches for SharePoint Foundation.
The Project Server CU includes the SharePoint Server and SharePoint Foundation patches as well. You only need to install the CU for the product you have.
This is a welcome change from SharePoint 2007 where we had to stack the patches.
Also, CUs contains the patches for all the supported languages which is why they’re so large.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

I don't care if you think i did something stupid just help me.

So here is what happened. A while ago i accidentaley left my ipod out in a full downpour. It survived but it started doing weird things like when i tried to watch a video it would enter the video thing and for a few seconds the screen would go black. Then it would go back to the menu and then i could watch the video. later on it started totally freezing up and so i restarted it. when i did it showed little sad ipod. so i did it again and it started acting normal. later it started clicking sometimes while i was using the buttons. i now realize that is the hard drive. after that LCD juice in the screen starting coming out so i sent it in to get repaired. after a while i was so fruastrated with my ipod clicking and screwing up i started banging it on my couch and bed mattress. That made it freeze for a few seconds every time i pushed the buttons. i banged it on things some more and now what happens is every time i restart it it shows sad ipod. so i restart it again and this time it starts clicking, and it switches between the apple logo and the sad ipod twice, then says connect to computer to restore. so i connect it and now it switches between apple, sad ipod, and +very low battery, please wait+ for about 30 minutes then automatically switches to forced disk mode for i dont know how long. and it dosent connect to itunes whatsoever. So i'll say it once more: +*CALLING ALL MAGICIANS AND MIRACLE MAKERS*+

similiar thing happening to me except for the leaving it out in rain, banging it against stuff, LCD juice, clicking and screwing noises, and forced disk mode. so basically mine just goes to sad ipod when i try to turn on then shuts off, but when i have it connected to charger/computer it goes to sad ipod screen to low battery screen, restarts and repeats

I think I did something I shouldn't have :P

so if you read my previous discussion, I was having iPhoto problems. I found an RC build of lightroom, and so thinking I had around 6,000 pictues in iPhoto, and thinking I'll just drag them all on the desktop, after a while I thought it wasn't a good idea, so tried to delete them and do eent by event, no my computer freezes, like I turned it off and turning it back on again, after 30 seconds to a minute, it freezes but I can still do the mouse. I thought it would be a good idea, but it wasn't. I just should have ben goingeen by event likee I was, but I thought this would be better. Any help is really apreciated. I'm on a different computer and have mine shut down to let it cool off before trying again. Trying not to freak out again. Running Lion

Well, if you downloaded a release candidate of any software for free which has not been released publicly and would cost money if it was, then you pirated software. According to the ToU of these forums, we are not allowed to discuss such matters:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
I will say this much:
Sounds as though you will have to wipe your drive and reinstall. Good luck.

I think I did something really bad..need help please

When my Iphoto 5 became very slow, I thought I'd be really smart and delete some files, but now I can't view my photos in the edit window, just the thumbnail. I think I deleted the IPhoto library. Can someone help me restore the settings to the proper way. I tried to import my photos from a cd, they import ok, but I can't view them. Help Please. Obviously I'm no pro here, so any advice would be greatly appreciated. Laura

Well, that's a very bad sign but let's not give up yet.
You indicated that you may have deleted the library. IF that's correct, you're screwed. Do your best to locate it. Although I've frequently told persons never to mess with the innards of the library, at this point you can't make things worse. If you can locate the library, take it apart and look for large files - 250K or larger. Those are your photos. Put them somewhere safe for the time being. (Small files are thumbnails or aliases.)
Again, post back with results.

I think I did something stupid

Problem: System profile won’t acknowledge printer. No printers list under USB in print utility.
Equipment: IMAC OS 10.3.9. Epson Stylus C60 printer.
Stupid thing I did: When printer was giving me problems, I deleted printers from Print Utility list before downloading a driver.
Steps taken: Per the Epson people, I repaired permissions. Threw out Epson folder from library.
Results: No improvement. Is it time to restore my software? I should mention that some of my applications seem to be crashing more than usual and it’s running slow. Can anyone help with this?

Hello grouchyfoglady,
1. Try to download and install the latest printer driver from Epson.
2. Download and install MacJanitor from http://www.versiontracker.com/dyn/moreinfo/macosx/10491
Run the Daily, Weekly, and Monthly utilities.
(In fact, run them regularly).
3. If this doesn't help, download and run Printer Setup Repair from http://www.fixamacsoftware.com/software/psr4/index.php. Has a 7 day free trial period.
Hope this helps.
Bob

I think I did something stupid with iSync

I am trying to get my Treo 650 to sync with my powerbook and iCal, specifically. Someone told me to get the isync conduit and install it and badda bing, my ical should sync with my treo. problem is, is now I cannot open isync, and when I try to install i sync v.2.1 it says I cannot because I have a newer version on my computer already. Since I cant open it, I am as you say, iscrewed! How do I find that application of isync, and or how to do get it all of my comp and re-install v.2.2? Thanks much~

http://discussions.apple.com/message.jspa?messageID=3180082

I did something and my system preferences are gone Now i cant do any tweeks to my system... HELP!

I did something in an update to my computer, and i think i deleted a bunch of files. I had to go to another computer to get Safari back on my computer, and now ive lost all my system preferences. i have no way to update anything on my computer. How can i download this portion of my system preferences so that i can again have control over my computer. any help is greatly appreciated.

As this is the Snow Leopard OS 10.6.8 forum I assume that is what you are running. You reinstall from the original install disk. Snow Leopard has never been available as a download.

I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up f

Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc
I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up faster?
Thanks

How to Remove MacKeeper
Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup.

I was trying to delete a large number of e-mails from Stamp. I did something and now I can't delete any of my e-mails. What do I do to fix this.

I tried to delete a large # of e-mail. I did something that caused the computer to hum for a few minutes. All of the e-mails came back and now I can't delete any of my old e-mails. What did I do and how do I fix it?

The clipboard is a place in memory where text that has been copied from is temporarily stored ready to be pasted elsewhere.
The clipboard cannot be viewed, and is essentially invisible to the user. Copied text will stay on the clipboard until it is replaced by the next piece of copied text.
Probably what happened is you copied your credit card number from somewhere, either intentionally or accidentally (perhaps you made a purchase on your iPad using this card recently), and the clipboard stored the number. Then, whilst you were using Facebook you (accidentally) pasted this credit card number from the clipboard into your Facebook message.
That's the only likely reason I can think of. Hope I explained it well enough!

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to defaule

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to default. The font is tiny, tiny. My operationg system is Mavericks.

Thank you for the list, I will print and keep it handy.
Contol F3 makes my whole screen larager or smaller.
Command option 8 does nothing that I can see.
Command option + or - will zoom in or out on the page I am on but if I change windows it reverts.
But bookmarks pane, the task bar, the password sign in and even the post I am writing (actually every printed word), are a font so small I almsost need a magnifiying glass. This includes web pages too!
I am using Mavericks.
Trying to retrace my steps when this happened. Nothing unusual, I was using airplay to watch a You Tube segment on the tv. I don't think that is related.
I really appreciate your help and comments on this. I can usualy google and find and answer, but to no avail with this one!

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open. HELP!

I am a newbie...and I think I did a big no-no as my Ipad isn't working. I synced it to a second computer at work which is a new Imac after already syncing to my pc at home with Itunes. Now it says it can't restore and can't get it to open, getting error messages but can't fix myself. Can anyone help??

iPad can connect only in one iTunes Library. If you want to connect it to a iTunes Library then you have to erase it. You can erase it from iTunes. Make sure you iPad doesn't have a password, or if it has a password make sure that you connect to the computer and enter the password of your iPad

I installed 10.6.8 from 10.6.6 on my Macbook Pro and now can't open Safari-think it's something to do with the Intego anti-virus software. Reverted Intego software back to default state and now computer just boots ups up slowly and can't access a thing.

I installed 10.6.8 from 10.6.6 OS on my MacBook Pro and have not been able to open secure sites on Safari. Think it has something to do with the Intego Anti-virus installed. Tried restoring Intego to default status and now my Mac barely boots up and does nothing else but spin. Ugh. Has anyone had similar issues and if so, were you able to resolve? How? Thanks,

1: Backup your user files folders of Documents, Music, Pictures etc., to a external powered drive (not TimeMachine) and disconnect.
2: Insert the 10.6 installer disk and reboot holding c
3: Simply reinstall OS X without erasing the drive, it will overwrite the installed version of OS X and the root level software, but leave your Applications folder contents (expect Apple bundled programs) and user files alone. (but backup anyway in case it fails)
4: Reboot and the Integro is gone out of your system, but there may still be something laying around in Applicaitons to delete. Use Software Update to get up to date.
5: You don't need anti-virus on a Mac, Apple provides it already for you sight unseen.
6: If you Software update, the bad certificate issues are pulled, thus are not a threat.

How do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!

how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)

Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Uh I Think I Did Something Crazy

Similar Messages

Maybe you are looking for