Uh Oh, after Leopard and GB08, MP3 grew from 4.2 to 248 MB?

Just upgraded to leopard and GB 08 -
For about a year, I routinely, though rather without actually knowing what I am doing, send my mp3 lectures (4.2 MB) through garageband, usually just one edit, cutting off the beginning if it is slow, and then to iweb. Today, after installing leopard and garage 08, when I send my podcast episode to iweb, it is 248MB!
So far, I did verify permissions and threw away garageband's preferences, and still the same thing happened. . .
please help this naive user....
thanks in advance

you're using the Share menu to send it to iWeb? what compression setting are you using?

Similar Messages

I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

Here is the download page

Downloaded Snow Leopard and now mp3 files won't play or open.. help!

Once I updated my system to Snow Leopard, my downloaded mp3 files won't transfer to iTunes or even play in general, they used to automatically download into my iTunes. Is there a specific setting I need to change?

What happens when you try to play in iTunes? Do you get any error messages? Can you play the mp3s in Quicktime or VLC?
If you want iTunes to play your mp3s, the setting for that is inside iTunes Preferences.
Have you tried repairing permissions and restarting your computer?

IPhone not recognized after Leopard and iTunes 7.6 upgrade -- solution

I did the iTunes 7.6 upgrade and then the Leopard install this past weekend. Everything seemed to work fine until I tried to sync my phone... iTunes didn't recognize that it was there, although I had power, etc.
Briefly, the solution is to reinstall iTunes 7.6. It may well be that if you do Leopard and then 7.6 you're fine, but I ended up doing it the other way.
This link below is to the relevant thread on the iPhone forum:
http://discussions.apple.com/thread.jspa?threadID=1348290&tstart=0
Chris

Thank you Jennifer. That was very helpful. I'm new to Apple MacOS. Not new to computing by any stretch however, having been a DE at Sun for 9 years, 2 years at Cisco and a couple of lesser known startups in Silly Valley. I hope their are more folks like you on these forums, and fewer like 'South Beach'. Thanks again for the iPhoto tip, that was very helpful. I did get the iPhone 'fixed' by re-installing the iTunes 7.6 pkg. You wouldn't happen to know how to turn off the boogus status icon in my launcher bar (top of screen) that complains about .Mac 'conflicts'? I don't have a .Mac account and don't want one. When I select 'review conflicts now' nothing happens, no dialogue, no new windows, nothing. This glyph appeared after I installed Leopard. I am less than impressed with this release from Cupertino.

I just updated my OS to Leopard and know Power Point from my office suite is opening, or tries to after a reboot and hangs when you try to open it.

I just updated my Mac Book Pro to leopard 10.6.8, and now Power Point from my office suite angs, and when I start up or re boot the laptop Power Point automatically opens and then just hangs, the only way to close is to force close.
Does any one know of any similar issues.
Thanks
Whipt

I just updated my Mac Book Pro to leopard 10.6.8, and now Power Point from my office suite angs, and when I start up or re boot the laptop Power Point automatically opens and then just hangs, the only way to close is to force close.
Does any one know of any similar issues.
Thanks
Whipt

IPhone 6 went black screen after purchasing and activating 3 days from Apple Store Online. Please advise

I bought iPhone 6 from online apple store for my GF as bday gift..
3 days after receiving and activating it, iPhone 6 went black screen..
After all, it is a birthday gift..
Is this issue quite common in iPhone 6 edition?

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, make sure that the phone is charged, then Connect in recovery mode, explained in this article:
If you can't update or restore your iOS device
If still no luck, contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Airport Extreme Card missing after Leopard and Login & Keychain Update

After these updates the network prefs showed no Airport card installed, even though it had been there seconds earlier. This was buried at the bottom of a posting for a similar problem. Just wanted to make it easier for others to find.
"I'm having the same issue with an iBook G4 1.2Mz model. Having successfully installed Leopard (5 user license version) on my Macbook, I installed it on the G4. At first this worked until software update installed Login & keychain update 1.0 and Remote desktop client 3.2.1. When the iBook reset the airport extreme card wasn't there. The icon in the menu bar states No Airport card installed."
"Some users have determined that an artifact left over from Mac OS X 10.4.x interferes with wireless connections after Mac OS X 10.5 is installed. The issue can be dealt with by finding and removing the AppleAirPort2.kext file from your Extensions folder, located here:
Macintosh HD:System:Library:Extensions"
That fixed it for me.

Ezz wrote:
Ok, I just installed the Login & Keychain update 1.0 from the software update and after rebooting my Airpot card does not get recognized anymore. This really ***** Apple!
Anyone else encountered this problem? Any known solution yet?!
Message was edited by: Ezz
Judging by the amount of posts it must be isolated. Mine works fine. Did you repair permissions ?
" Keychain-Administration or Privilege Issues after Upgrading to Leopard:
If after installing Leopard as an upgrade or archive and install you experience any issues with not getting mail, can't run Disk Utility, can't login as administrator, can't print or anything that entering existing User name and/or passwords requires, you are not alone and Apple is working on it now.
The fastest method of determining if you have been bitten by this, open System Preferences, click on Accounts and verify that you are the Administrator as opposed to Standard, and that the checkbox asking if you want this user to be an Administrator is checked. If you are Standard, and the box is unchecked and/or greyed out, you have a situation most likely, whether you know it or not, yet.
Further verification can be done in the Accounts window by clicking the lock to make changes, entering your name and password and being denied access.
Apple says the best thing to do right now is not to try too much voodoo and wait until later today for a solution, hopefully. I was told to close the lid and walk away until Apple calls me back.
The good news as I write this on my old reliable Pismo, is that I have a bootable Carbon Copy Cloned 10.4.10 complete back up on an OWC external FW disc. Thanks Mr. Bombich! I just hope I don't have to use it.
Post from xlr8yourmac.com
William

Importing and moving MP3 playlist from CD to hard disk

Hi,
The source of one of my playlists is a CD with files in MP3 format. I've addded the playlist to iTunes but want to physically move the playlist into my iTunes library on the hard disk so that I don't need the CD in the drive to play it. I know how to move individual files and reset the source but can't see how to import and move an entire playlist so that iTunes knows where it is. Can anyone help?
Thanks in advance.
Jane

Two ways. You can use Windows to copy them to the hard drive, and then add them to the iTunes library. Alternatively, you can set iTunes to "Copy files to iTunes Music folder..." (you will find that option in Edit > Preferences > Advanced > General) and then drag the files from the CD into iTunes.

After downloading and install 10.8 from the Mac Store, where does the install app go? I would like to burn the 'InstallESD.dmg" package to DVD.

Hi folks -- i downloaded ML 10.8 from the Mac Store yesterday, and before installing saw the install app in my Applications folder. Following a posting on Macworld.com, I would like to make a DVD backup of the installer, but after restarting from the installation process, the Installer app is gone from the Applications folder, and I cannot find it anywhere... In would like to make that DVD backup in case I have Internet issues and need to do an install.
Do I need to download the installar again (and if I do, do I have to pay for it again), or is it hidden somewhere invisibly on my drive?--
Thanks in advance ~

It gets deleted as soon as you install.
You need to quit the installer and extract from the app package before installing or download again.
AC

Playing and transferring mp3 songs from cd to ipod

I can not play and transfer the mp3 songs cds in to itune and ipod, although I am able to play it on window medial player on with my vista system- What shall i do?

This article should get you started.
http://docs.info.apple.com/article.html?artnum=303632

Music not showing up in library after drag and drop (7.0)

Music will not show up in library after draging and dropping .mp3's into itunes. Also won't show up if I try the File > Add Folder to Library. The processing files box shows up like its going to work, but it just doesn't. I have tried many differnet mp3's, some actually DID import.
Also, double clicking on an mp3 will bring up itunes, but it will not load or play the song.
I currently have 55.5GB of music, and 10,158 songs. Not sure if that has anything to do with it.
xw8200 HP Windows 2000

Try holding down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in \Documents and Settings\Username\My Documents\My Music\iTunes\. Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file

After downloading and installing an app in sharepoint i cannot open it

I am using SharePoint 2013, and i want to configure high-trust apps for SharePoint.
I followed those msdn articles :
Http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx#Createapp2
http://msdn.microsoft.com/library/office/fp179923
My problem now is the following:
After downloading and installing any app from the app store or even deploying it from Visual Studio, when i want to open the app it displays a blank page and shows the following error message:
This page can’t be displayed.
Make sure the web address http://apps-95e7c833b3f075.sp.local is correct.
So as you can see my domain is `sp.local` and my app prefix is `apps`...
Sorry my problem is a bit wide-open.
I do have an `App Management Service` and `Subscription Settings Service` running on the server.
I fellow the msdn articles and every thing was set like it is mentioned.
Can anyone help me please?

Are you able to ping url apps-95e7c833b3f075.sp.local
Use fiddler to check for any help
perform nslookup for URL apps-95e7c833b3f075.sp.local
Check if you have any host entry on server
Check if IIS binding are proper on all servers.
Are you trying it with service account. if yes, service account dont work properly with app. user different account
what permission do you have on site
If this helped you resolve your issue, please mark it Answered

IPhone wont show up in itunes after upgrading to leopard and iLife 08

Hello:
For some reason, my iphone does not show up on my itunes after upgrading my mac to leopard and ilife 08. The phone was syncing properly before the upgrade. I also installed all the patches that were available for downloading but I did not try syncing between the main update and patches. I am running itunes 7.6 and had been running 7.5.1 before that. My iphone is on firmware 1.1.2 and I have it set to manually sync. My ipod video is syncing fine but I had that set to automatic syncing.
I checked the system profile and the usb is showing the iphone just fine.
Can anybody help?

Yup. It does work, had the exact same problem, iPhone showed in system profiler under USB, and iTunes would not recognize, reinstall fixed it all. It almost looks like a permission problem after the reinstall to where some .plist files got wrong settings set, repairing permissions might work too.

After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

Download 9.1 and 9.2.3 updates and install them

After updating to snow leopard and trying to delete mackeeper flash player will no longer work. Can anyone help me?

After updating to snow leopard and trying to delete mackeeper, Flash player is being blocked and will not allow me to view utubes. Can anyone help?

Here are instructions for eradicating MacKeeper - you may need to re-install it to uninstall it fully:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Regarding Flash - there are many reports on here that v13.x isn't working for a lot of people. distractme in the following thread posted instructions on how to install the previous version, which should work whilst Adobe work on a fix:
https://discussions.apple.com/message/25430408#25430408

Uh Oh, after Leopard and GB08, MP3 grew from 4.2 to 248 MB?

Similar Messages

Maybe you are looking for