Uh oh. I think I need help.

I just posted another topic about removing Classis (haven't done it yet). This topic is about removing languages that I don't use. As you might have guessed I'm trying to clear up disk space. I just downloaded DeLocalizer and am running it right now. It says it takes about 15min. I then saw on the software developers site that it hasn't been tested on 10.3. And I bet that means not 10.4 either. Do you think this will hurt my system?

Ok, it seemed to work fine. I saved 3.3GB! Thats amazing. This is a good option for anyone that needs to save disk space.

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Think I need help

Hi there,
I attached my ipod and used the updater software and it came up with the message, Firmware failed to install. Now my ipod won't register on itunes and my computer says it is not formatted. It comes up with a folder and an exclamation mark when I try to start it. Will I have to resore and if so, have I lost all my files that I have stored on there or is there some way to save them?

Have a look at these.
"Disk cannot be read from or written to" error syncing iPod in iTunes.
iPod shows a folder icon with exclamation point after disconnecting.
iPod shows a folder icon with exclamation point when you turn it on.

Need help w/ JSP formating a page.

Ok. I need to make the following code work. I think it needs help w/ formating is all. Below is the JSP page I would like it in as well as where I think the code should go. Not shure how to get it to display the output though.
var fullSessionName;
Function startHODSession(sessionName) {
var i = document.HODApplet.startSession(sessionName);
if (i == 0) {
fullSessionName = sessionName + document.HODApplet.getSessionID();
I need to run that part of code and display the output on a webpage. Any help would be awosme as I am lost w/ JSP more of a vb kind of guy. but learning quickly. Thanks for any help or advice.
Thanks
My JSP file:
<%--
Document : index
Created on : Oct 7, 2008, 7:14:58 AM
Author : tl01mjf
--%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import ="java.applet.Applet" %>
<%@page import = "ibm.eNetwork.HOD.BaseApplet" %>
<%@page import = "ibm.eNetwork.HOD.HostOnDemand" %>
<%@page import = "ibm.eNetwork.HOD.JSHostOnDemand" %>
<%
CODE GOES HERE
%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h2>Hello World!</h2>
<input type="text" name="AgentID" value="" />
<input type="submit" value="Push IT" name="id"/>
</body>
</html>

Great catch on the aplet and maybe that is where I am going wrong. So let me back up a little and maybe you can get me out of my bind.
Basically what I want for a test app is: a little text box w/ a button. type in an number and click the button.
the button will then send the info to a terminal emulator. (ibm host on demand)
So that is what the 3 include statements where for. I got that from the API example.
so what I really need the page to do is print the list of connections.
so I need to get the latest session ID:
var fullSessionName;
Function startHODSession(sessionName) {
var i = document.HODApplet.startSession(sessionName);
if (i == 0) {
fullSessionName = sessionName + document.HODApplet.getSessionID();
Then run:
public int sendKeys1 (String text)
The string being what was put in the box.
for right now i do not need error checking and i know the screen will be on the right spot to accpet the input.
so if there is a better way to make it work using an applet....Im all for it.
any ideas would be great.
thanks

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this.am i right?

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this? Am i right? Is there any body out there right now that could help me? I'm thinking about going from 8.1.3 to I guess yosemite? Or is that for Mac computers? I don't understand the language entirely on the help page. Anyone's straight forward and easy stepped advice would be much appreciated. I'm so frustrated and I need a job so badly! Drowning in debt. Any help appreciated!
Thanks,
A

You're a Windows user, correct? If so, read here:
http://support.apple.com/kb/DL1455

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

VGA is an analog signal HDMI is digital. A simple cable would not work you would need something that converts the analog signal to digital.
A search of VGA to HDMI turned up a few possibilities but nothing specific. In any case the picture on the TV will not be very good given the source.
You should check to see if the TV has a VGA input. Some TV's have a computer connection port and this is usually VGA.
Message was edited by: Frank Caggiano - I'll ask the hosts to move this to the proper community.

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac. I think I need to update my settings, but am not sure what to do. Can anyone help. thanks

I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac. I think I need to update my settings, but am not sure what to do. Can anyone help. thanks

Welcome to the Apple Community.
If you haven't done so already you need to migrate your mail account to iCloud first and do so IMMEDIATELY at the website Move
Then
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

So what is your iPad doing, specifically? Are you having a problem when you try to sync it or back it up on iTunes? I think we need more information here before we can help...
Thanks,
L.

I need help, i am having a brain fart and i can' think. Dice rolling Game

here is what i am supposed to do:
write an app to simulate the rolling to 2 Player (Player and Computer)
Show each rolling in Map size 50 channel
Just like this: Player play frist
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0] ... Press any key to rolling
You got : 6
Your position : 6
1 2 3 4 5 [P] 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0] ... Computer is rolling
Computer got :2
Computer position: 2
1 [C] 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0]... Press any key to rolling
You got: 6
Your position : 12
1 [C] 3 4 5 6 7 8 9 10
11 [P] 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
[0].... Computer is rolling
Rolling until someone got 50
Show Game over
That is about it. I need help, i am having a brain fart and i can' think. it is done in java in console, no graphics or nuthin.
thanks

That is about it. I need help, i am having a brain
fart and i can' think. it is done in java in console,
no graphics or nuthin.So to fill in your question:
"Please someone do my homework for me ? "
Or do you have an actual question ?

NEED HELP.. Think Spyware was installed on my Mac

Ok here is my problem... First off I just moved to Europe and forgot to pack my Startup Disc that came with my Mac.... How can I get a new one???
The reason I think I need a new one right away is that....
Today I got an e-mail for Paypal... it said that I needed to update my info... so I clicked on the link... and went about entering all my new info.... since we just moved to a new apartment and all...
But then I was deleting a bunch of useless e-mail.... and I came upon an e-mail from 3 weeks ago.... It said thank your for updating my information with Paypal.....
I then went back and looked at the e-mail that asked me to update my info... and it did not look quite right.... so I went and logged into Paypal the safe way... and changed my password.... then called my husband who said he should change my password as they might have installed Spyware on my computer when I clicked on the link....
so then I went to Download MacScan... and when trying to install it... it asks me to enter my User Name and Password to Authenticate... However it won't accept my Password and Username it Keeps saying.... "Sorry you have entered and invalid User Name or Password..."
So now I am unable to get MacScan to see if I have any spyware on my Mac... and also I don't have a Startup Disc to change my Password.....
What can I do???? and how can I fix this right away...
Any Help would be sooooo greatly appreciated.....
Thank you for your time on this issue....
Rhonda.... In Sweden...

There are excellent posts on security at various sites and I'm bad at setting up hyperlinks, but *until you can get a new install disk*:
1) Disconnect from the internet; it's time to change your login password(s). If you are using an administrative account, think about setting up a user account without administrative privileges. Here are a few recommendations:
2) When you start up your computer hold down the shift key until you see the login window. You are now in "safe mode". Check and then secure empty the trash. If the spyware uses a preference file it might temporarily be disabled.
3) What I am writing now may not necessarily rid you of spyware, but it will give you some options until you get a system disk. Go to System Preferences (SP) (the apple icon in the upper left hand side of the computer). Open SP and then go to Accounts and open that. Try to open the lock or if it is unlocked you are in luck. If you can't open it, then you're password may have been changed and the following suggestions can't help much. If you can unlock the lock icon continue.
4) Click the password tab and change your password(s) if you have more than one account). This will require you to enter your old (and hopefully still working login password). In terms of new passwords, DON"T have any part of it be a word in the dictionary. These are subject to easy "brute-force" programs that can grab your password easily.
Use combinations of numbers, letters, and symbols. You can misspell a word or two. Make up sentences that remind you of your password. "Let he who is without sin cast the first stone"= LhwiWSctFS. Add numbers and characters, upper and lower case like $ % () 64@?/ etc interspersed. Use at least 9 characters. Look for any unusual item in"login items" and delete if it looks suspicious, using the minus sign. If you have no luck trying to change passwords, then go to the section which assumes you have a new OS X install disk. Your system login/administrative password has been changed.
If you have a friend with mac OS X you could reset your password by hooking up the two computers through the firewire ports and start up in Firewire target mode. (Another Google moment...maybe your new friend has a start up disk?)
5) Now close the lock and restart your computer. Login with your new password and then do a spotlight check for macscan and delete all macscan files (especially anything that has plist at the end (these are preference files).. Trash and delete what you find. You can also reinstall the software without deleting prior files, but "uninstalling" is the safer way. You could also just try the new password with MacScan to authenticate, but deleting and reinstalling MacScan is a safer bet.
6) Download/Install MacScan and enter your new administrative password which should enable you to run an authenticated full scan. Click on MacScan Preferences and check both tabs.If you don't have your purchase code, run in demo mode. Run a full scan. If you're lucky and MacScan finds something you know what to do. Be aware, however, that MacScan does not detect many commercial applications that might be considered spyware or malware.
7) If MacScan doesn't pick up a thing, try downloading, installing and running ClamXAV, as advised. You might also want to consider a program called Little Snitch which monitors outbound connections. You can Google this stuff and read up on it. Little Snitch won't eradicate; it just limits the outbound connections your computer can make.
8) The prior advice is right on point. Change ALL your passwords on all your accounts, hopefully in secure mode (https). This is only a temporary fix because some spyware may be capable of grabbing all your passwords until it is eradicated (for example, a keystroke logger literally grabs everything you type and can "phone home" that info)
9) Regardless of whether the above items work, your best bet is to look for an apple store where you are or go online and purchase an OS X TIGER Install DVD or whatever OS system you have been using. Maybe Leopard in the future?
10) Once you have the new OS DVD (im assuming your drive can at least read a dvd), you have a few choices here:
Insert the new dvd, restart your computer and hold the C key down until you see the logo and the "spinner". You are booting up from the system CD and not your hard drive. Personally, I would trash everything without saving anything from the hard drive. If there are things you really really want to save, photos, data etc, you should first save and burn them to DVD or an external hard drive before booting up with the system disk. Should you reinstall this later on your new system, you run the risk of reinfecting your new system all over again, unless you feel secure that a 3rd party app can scan the disks/drives with success. The risk of a mac virus is almost non existant at this time...the same holds true for trojan horses and most spyware. Phishing is another story.
You could retain the files and data you have by doing an archive and install which creates a NEW System Folder and renames your old system "Old System" but this is not recommended for obvious reasons.
So you have booted up with the system disk. Don't simply install. Just select English as your language and then go to the tab which enables you to open Disk Utility (i think it's called options...it's late, i'm tired and having a senior moment). Its there with other options such as reset password, etc.
While now in booted disk utility, highlight the whole disk (not just your hard drive), go to the erase tab, rename your hard drive if you like and open security options. For your purposes an erase would probably be ok, but the best thing to do is a secure erase. Check the button that says it will do "one pass"and install zeros on the entire drive, not just your hard drive volume. Then click erase. It will ask you to confirm.
Do so, but remember that ALL prior date will be lost for most purposes. It is feasible that Big Brother or others might be able to recover some data, but if you're not doing some identity theft scam, running with Al Qaeda, a big corporation looking to hold onto trade secrets, a bit paranoid or overly security conscious one pass should do. If you're up for it do 7 passes. Hey 35 sounds like even more fun! Think of all those extra zeros. ;>) One pass will take 30 to 60 minutes depending on the size of your hard drive. 35 passes could mean 7 to 24 hours.
Once the security wipe is done, your disk will probably have 3 partitions and a hard drive volume. Close Disk installer and Reinstall your system software. Check out security recommendations at Apple and other sites. For a minimum of time, you can get alot more protection. Consider using Filevault if you aren't already doing so. You are now doing a "clean reinstall".
You can Google login options mac to get a sense of what you feel most comfortable doing in terms of security and how you log in in the future. Don't enable automatic login. This = trouble if someone walks by your mac. They can start it up without knowing your password. Firmware protection is another option.
Now your computer has a better than 99.99999999% chance of being totally clean.
Deal with the harm that may have been done by changing every password on every account AGAIN. NOW. With your new clean computer.(except your new mac passwords). Consider changing your keychain password if you use keychain or boot up again and change your login password so that your NEW login password and keychain password are not the same.
If you have done online banking since the scam, and while at risk, beyond changing the passwords, you may want to contact your bank and change your accounts. All automatic charges/payments can be rolled over for 90 days. After that you need to give notice to payors/payees.
Finally, to limit the possibilty of identity theft, log onto www.annualcreditreport.com. There are 3 major credit bureaus. You have the right to a free check from each of them every year. This means you can stagger your requests to monitor credit activity every 4 months.
This is alot to digest, but I hope it helps. I'm sure you know the obvious = never ever click on a hyperlink from Paypal or anyone you don't know. The same holds true for downloads unless it's a reputable sight. Become aware of the small things you can do with your mac to make it even more secure than it already is.
However, when "I" do send you that email asking you to help, because my spouse/client/brother/father/sister/mother/adopted son/small goat/pig/chicken Nikomi Zimbabwe died with no heirs and I'm in charge of the account in Nigeria or maybe even Swizerland, it's real. It's me, remember?....and I just can't wait to share the millions with you because I read your email address and can tell from that alone that you're a kind compassionate trustworthy Christian/Bhuddist/Muslim/Agnostic/Atheist woman.
I also know because someone you don't know told me about you, or maybe I'm psychic or psychotic; I confuse the two. Just send me a little money to help bribe the court/process the application. Whats a few thousand when millions await you? God will bless you... and your little computer too ~!
So will I when I get your cashier's check ;>).
An unjust law is NO law at all - St. Augustine

I need help contacting someone that can help me find who the previous owner was who set up my iphone 5s, there is an activation lock and i need to contact the owners. help??? i think the iphone was stolen and then sold to me

i think my iphone was stolen before being sold to me, i need help finding out who the original owner was to unlock the phone. any ideas on numbers i could ring? im super gutted

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Dear apple management, I have purchased I pad mini e few days ago. I need help as follows: (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>

You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

Im debating whether i should get the 8GB or 32 GB itouch. There's a 100 dollar price difference, and I wanna know if its worth it for me. Im 13 years old and I dont think ill need as much space as a 25 but i want it to last. HELP!

Im debating whether i should get the 8GB or 32 GB itouch. There's a 100 dollar price difference, and I wanna know if its worth it for me. Im 13 years old and I dont think ill need as much space as a 25 but i want it to last. HELP!

Hello!
I have a 8GB Ipod touch. I the other ine is worth the difference, because the simple ios 5.0 takes like 3 GB!!!
Another reason is that new some apps take 500 MB. I'm going to ask for the 32GB model for Christmas, and I am very disappointed with the amount of files you can have in the 8GB Ipod.
Hope it helps you!

Thinking of Upgrading HDD, need help !

Hey everybody, I just got an iMac it's been exactly 2 weeks since I purchased it, and I already think I need more HDD Space, so I looked it up online and there are tons of guides, but, my dad bought me Apple Care, so i don't want to viod it, so I called up Apple Pasadena Store and asked them, she told me that, I should see if Dyno or Unitech, but i'm unsure help ?

Carolyn hit it right on the head by suggesting an external drive. To try and upgrade the internal disk isn't wise at it might void the warranty. If you get an external drive look for one that supports Firewire 800 because that is the quickest speed available on an external drive for an iMac. Two popular brands and models are the OWC Mercury line and Lacie Quadra D2 line. Both are great drives and overall would most likely be significantly less expensive than opening the iMac and installing a larger internal drive. Also they would give the added benefit of more flexibility too.
Regards,
Roger

Uh oh. I think I need help.

Similar Messages

Maybe you are looking for