UI elements not being displayed for a particular user

Hi,
I designed two i/p fields and text view for the same in a view. All are static UI elements and no visibility property is set.
This view is displayed as a popup when i press the button in the main view.
This is working fine for all the users in production except for one user.
This particular user is able to see only one input field and the corresponding text view.The other i/p element is missed here.
The whole component is displayed in a portal as a tab with other components in the adjacent tabs.
Please help me out to resolve this issue.
Is this problem is related to webdynpro abap? or
Is this a portal issue?
Regards,
Bala.

Hi balamurugan ,
may be check the user setting for the User id .
right click on the view click user setting . and check whether he hide that button .
look at the pic.
http://i46.tinypic.com/x3cyf9.jpg
If any UI element is made invisible it will show the option invisible elements .
you can restore it .
http://i46.tinypic.com/2vjpraf.jpg
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on May 28, 2010 4:59 PM

Similar Messages

Ship-To Address not getting picked for one particular user

Hi SRM Gurus,
I am working on SRM5.0 system with ECC6.0 as backend.
For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
Can anyone tell me why this is happening for one particular user?
Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
Can anyone help me out?
Thanks n Regards,
Ancy

Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
now , when I am trying to create a SC and I have tried to add delivery address bby 2 types .
1. By adding through the portal
2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
I have also made it default however when I raise the SC it again shows me as blank :
I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

Album art not being displayed for some songs.

I've recently imported some MP3 files and used the "Get Album Artwork" option to get the cover art. I've noticed for all of these songs the album artwork will not display in Front Row on a remote machine using the sharing feature. Same in iTunes if I try to play these songs via sharing. If I add the cover art myself, I don't have this issue.
Anyone else running into this? Does anyone know a fix or workaround (other than removing the artwork and manually readding it)?
All my machines have the latest versions of all software.
Thanks
Curt

Thanks! You are right. There's an Album Artwork folder and I scp'd one of my "affected" mp3s to another machine and the artwork was absent. Seems like Apple should've just added the artwork to the mp3 file as if it was manually added. Perhaps they had a reason not to, though.

Premiere Elements Won't Start for a Particular User

If I try to start a new project or use an existing project then I get the message "Sorry, a serious error has occurred etc" and Elements closes.
This happens only with my main working user account (Windows XP) but not any other user accounts.
I have tried all the usual tips such as deleting the temp folder and deleting the preferences file in Docs and Settings.
I have checked the preferences folder security settings and they are the same for all users.
Any thoughts on what else I can do? I will try to write the next bit in as small a text size as I can .... I am using Elements 1.0
thanks in advance
Davy

Davyxyz wrote:
I followed your suggestion regarding using Adobe Tech Support but others with similar problems report that Tech Support don't understand the problem and are likely to ask you to de-instal and re-install, defrag the disc
Have you uninstalled defragged, and reinstalled ? If not certainly worth doing. Install it from your problem users account. I suggest right-clicking the setup file and selecting 'Run as Administrator' - that's the Vista / W7 option - if I recall in XP you select 'Run as ...' and then select administrator.
PrE Hanging, or Crashing - Some Tips is a useful document that has solved many a users problems.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Did you update your operating system? If so, did it solve the problem? I have not updated my OS because so many people complained that the newer Os's had problems.

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Crystal Reports 2010 SP1 on IIS 7.0 - Report is not being displayed

Hi,
Finally, the keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll error is gone, after I installed Crystal Runtime 2010 SP1. Also, I tested Crystal Report 2010 SP1 on my Windows 32 application and I can tell that I do not have this error anymore and report is being displayed properly.
But Crystal Report is not being displayed on ASP.NET page on MS Server 2008 standard edition SP2 with IIS 7.0. Database resides on iSeries remote machine.
The MS Server 2008 is virtual machine.
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
Simply the report is not being displayed at all. No errors are being recorded in the Event Viewer.
Nothing happens; excerpt the page is Loadingu2026 and Waiting for u2018website nameu2019 in the left lower corner of Firefox web browser.
Here is the code behind aspx page with a command button - very simple:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
protected void Button1_Click(object sender, EventArgs e)
ReportDocument crReportDocument;
Database crDatabase;
Tables crTables;
// CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnectionInfo;
crConnectionInfo = new ConnectionInfo();
//Set server name
crConnectionInfo.ServerName = this._strServerName;
//set database name
crConnectionInfo.DatabaseName = this._strDatabaseName;
crConnectionInfo.UserID = this._strUserID;
crConnectionInfo.Password = this._strUserPassword;
//Set integrated security
crConnectionInfo.IntegratedSecurity = false;
crReportDocument = new ReportDocument();
crReportDocument.Load(Server.MapPath("~/crystal-reports/TransformerLoad/TransLoadMonthlyMax.rpt"));
crDatabase = crReportDocument.Database;
//Set all tables from current report file
crTables = crReportDocument.Database.Tables;
//crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
//Apply schema name to the table's location
foreach (CrystalDecisions.CrystalReports.Engine.Table _crTable in crTables)
crTableLogOnInfo = _crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
_crTable.ApplyLogOnInfo(crTableLogOnInfo);
//Check if database table name starts
if (_crTable.Location.StartsWith("XFMRSMAX", StringComparison.CurrentCulture) ||
_crTable.Location.StartsWith("XFMRSMIN", StringComparison.CurrentCulture))
//_crTable.Location = this._strSchemaName + "." + _crTable.Location.Remove(8) + Convert.ToInt32(Request.QueryString\"ReportYear\");
_crTable.Location = "XFMRSMAX09";
else
_crTable.Location = _crTable.Location;
this.CrystalReportViewer1.ReportSource = crReportDocument;
This code runs on my development machine Win XP SP3
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
This code also runs on another development server - Windows XP SP3 (IIS 5.1)
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
ispnet_client folder has IUSR user and this user has read permissions to this folder. I even tried to change the permissions to Read & Execute.
I am developing my reports using Crystal Reports 2008 SP2.
Any help would be greatly appreciated.
Serghei

Hi Ludek,
Thank you for your response.
I checked the web.config file, all http handlers are there. I think the handlers are required to render the images on crystal report viewer but in my case the report viewer is not being rendered.
I have to questions:
1. What exact folders should be under aspnet_client\system_web?
In my case I have structure like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13
aspnet_client\system_web\4_0_30319\crystalreportviewers13
Should I have folders something like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13_1
aspnet_client\system_web\4_0_30319\crystalreportviewers13_1
after I installed Crystal Reports 2010 SP1
Also, in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET 4.0\Common\Crystal Reports 2011\ there is no folder named as crystalreportviewers13 but instead crystalreportviewers
a.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13, or
b.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13 and rename this folder to
crystalreportviewers
2. Can you explain how to get a data report?
This is the quote from your previous answer
I'd be interested to see this simplified to a saved data report - no DB logon code - as a test...
Thank you Serghei

Pictures not being displayed on twitter

Certain pictures on twitter are not being displayed on firefox but work fine in internet explorer
an example page is http://pic.twitter.com/flmKKGz8
with firefox there is no piture just the message, when looked at in internet explorer the big pucture under the message can be seen

Hello Cor-el Thanks for the advise, I checked a few things as you mentioned and it turned out that the ad-block add-on was preventing the pictures loading, very strange as it doen't do it anywhere else on pictures, but all rectified now.
Thanks again :)

ESS - Family Members - Incorrect gender being displayed for Children

Hello,
On the "Family Members/Emergency Contact" page in ESS the Gender of the children is not being displayed properly. The first child displays with the proper gender but after that each subsequent child is being displayed with the same gender as the firts child.
For example, if the first child displayed is Male then all others will then be displayed as Male regardless of whether they are Male or Femail.
Any help is appreciated and thanks in advance.
Daniel A

Daniel,
I guess it has to do with the HR configuration. How do the genders appear there?
Regards,
Sandeep Tudumu

UI elements not being displayed for a particular user

Similar Messages

Maybe you are looking for