UI Not appearing in GP Application

I created two COs and while testing, the UI is not appearing.
I have followed the document for integrating two webdynpro applications.
what and where could be the possible error.
The build and all is fine.

Hi,
Have you added "cafeugp~api" as Library reference?
Check Application properties (WebDynpro Component, Interface View, Startup Plug).
If it does not solve your problem, try to delete Application and create it again using New Application wizard.
Reward points if it's helpful.

Similar Messages

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading.

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

I'll back up Csound on the MacKeeper thing. In fact, I actually wrote the following about it:
http://www.reedcorner.net/news.php/?p=245
Remove is ASAP. Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it. Try this:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple. However you have gotten it, your best bet is removing it. See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
http://www.reedcorner.net/guides/macvirus
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

Firefox won't install on my Mac, it just finishes the installation then does not appear in my Applications folder.

Firefox offered to create a new profile for me, but took forever to do so so eventually I had to shut off the computer. In restarting, initially Firefox would not open as "Profile could not be found". Having moved Firefox to my trash folder, when I attempt to install Firefox again, it completes the download, then does not appear in my Applications folder.

This is likely caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is not present on the hard drive.
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 29.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
See also:
*http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

The device does not appear in the application find my iphone

The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5

Try
iCloud.com from a computer
Select the Find My iPhone green circle
Top center select All Devices
Note is it shows here you can remove it from here too.
If it's not there it's linked to a different Apple ID

Mi emails notifications are not appearing as other applications, only can see them when open my mails

Hi I have an Iphone 5c and set my email account (local provider company).
I can receive mails perfectly and also send mails but the notification of a new mail comming is not appearing with the red globe on top of the Mail as suppose to.
Once I entered the mail application the mails start to download and the red globe appears but not before just after I entered tha application.
the other applications I have like whatsapp and bbm are working perfectly. I check the notification center many times and looks ok for me but don't know what could be the problem. If someone can help me I really appreciate...

Push mail is automatically sent to your device when it arrives at the email server. Your email account has to support this.
Settings > Mail, Contacts, Calendars > Fetch New Data > Push > ON, your account > select Push (if available), Fetch, or Manual
Below list of accounts:
Fetch > select interval

HBR rule not appearing in Planning application after has been created.

Hello All,
I am having an issue with HBR rule with Planning application. I´ve created a new rule and after set its location and access privileges when I log into Planning, the rule does not appear.
Someone could help on that ?
Thanks,
Alvaro

Are the Database server and applications server in different time zones?
When the database server and web application server are in different time zones, the HBRCacheEvents will be deleted the moment entries (new change events) are written to it. Planning also has a HBR engine that keeps polling HBRCacheEvents table for new events and delete old events to update the cache on the fly.
A Planning Web service restart will force the cache to be refreshed and thus the changes to be visible after this restart.
To solve this, you will need to either move one of the servers to be in same timezone as the other, or to anticipate the changes by scheduling restarts more frequently.
Refer: Planning Web Services Requires Restart to Show Changes to Business Rules or New Business Rules (Doc ID 1228673.1)
HTH-
Jasmine.

System default email client (Thunderbird) does not appear in mailto applications.

I should like to use Thunderbird as the mailto application in Firefox. The only options listed for mailto are GMail, Yahoo mail, always ask, and choose application; use default does not appear.

I've solved this. Clicking "use other" in mailto applications, "cancel" when a window opens to select application, then clicking an application other than mailto, and the system default mail client is selected. Seems a bit user unfriendly. I'm running Firefox 24 under Ubuntu 13.04 BTW.

Opentype fonts do not appear in any applications

I recently discovered some opentype fonts that came with Adobe CS3. The fonts are in the font folder in the root library and appear in the application Font Book. However, the fonts do not show up in any other application, including the Adobe applications. The fonts are all enabled. I suspect I am missing something very simple, but cannot figure out what it is.

There's a lot of fonts hidden in that fonts folder on that CD glad you picked them up.
I assume you installed the fonts by double clicking them and clicking install.?
You may need to rebuild your font caches per application - this will erase your prefernces so start it with the CS3 application you use least (choose between ID, PS and AI).
Hold down shift command option (Shift apple alt) as you click the CS3 application in the doc. When the delete settings file appears click OK. This will rebuild your preferences including your font cache for that app.
Then check you fonts and post back.
I'm curious that they're not showing up anywhere except font book but we'll start with CS3 and see where we get to.
M.

Edit Button does not appear in Planning Application?

Hi ,
I have created one application in Planning. Using “Outline Load” utility I have loaded metadata in this application.
But now I am not able to add any dimension or member in this application. even I am not able to add,edit or delete any member in the same application. I am not able to change any properties of member as well as dimension.
If I created any new application in the planning then all the buttons are appear in that application so, I can Add,Edit, delete any member or dimension in this application.
could you tell me what happened in my First application so because of that I am not able to view any buttons like add,Edit,Delete ?

Did you convert the application to EPMA?, if so then you can only edit members in EPMA not in Planning^^^A pox upon EPMA.
OP, did you really go through the step of converting a Classic app to EPMA? That would be pretty dramatic if true. And painful, as you have maybe found.
Regards,
Cameron Lackpour

Menu bar not appears in some applications.

Hi, all!
I have a strange problem and really need help:
top menu bar not appears, when i start some applications.
For example, Numbers, keynote, quicktime and, in the end, Finder!
Problem solves when i replace the .app file of the application with the file from another computer, but it appears again with another application. No errors, no messages, just no menu bar in the top.
I don't know why it happens and don't know how to diagnose this problem.

Sometimes something as simple as restarting the computer will resolve system quirks. If that does not work, boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

Deployed DC's not appearing on the Application Communication: Configuration

whenever i deploy any WD UI DC on the portal via NWDS , i am able to successfully deploy the DC.
However i am not able to view any of my DC's on the the Application Communication: Confirguration in NWA.
i have to assign the provider systems for the DCs, so i would require the DCs to appear.
i am currently operating on CE7.2
please help in this regard.

Hi Ashwin ,
While importing the service into your web dynpro you will be asked to create a new service group or use existing. If you have not selected both while importing the service the DC will not be available in the application communication as there is no service group present for that DC. So you can once again check whether a Service Group is created or not. Hope this helps.
Regards,
Rohit

Re-installed iPhoto Does not appear in Finder/Applications

I had iPhoto on my MBPro and attempted to transfer my iPhotos from my iMac to it. I was not satisfied with the transfer so I sent photos and iPhoto to Trash. I then re-installed iLife but after installation, I can not find iPhoto.app in Finder or on doc or on laptop.
Where should I look for iPhoto?
What should I have done/not have done/should do/ or not do/ Now?
I really need to get the iPhotos albums and photos from iMac to MBPro before Tuesday of next week (06/09/09)
Thanks for your help.
I use iPhoto '08!
Thanks.

iPhoto should be in the applications folder - if it is not delete all iPhoto receipts - "your hard drive" ==> library ==> receipts==> - and install again
Note in the future the application is separate from the library - and you can have two different libraries for the same version on a machine (actually any number of libraries) and switch between them by launching iPhoto while depressing the option (alt) key and using the select library option
LN

I have downloaded After Effects but it does not appear in my application folder.

I have downloaded three programmes from CC but now I have just downloaded After Effects but it is not in my applications folder.

Hello Jeff A Wright and thanks for your reply.
My problem was that I had an incompatible operating system on my iMac. I have downloaded a new one and everything is working just great.
Thank you again and take care.
Fred

"mailto" does not appear in options/application

According to firefox help, you can set Firefox to default to Google Mail by going to Tools/options/applications and selecting Mailto. Mailto is not one of the listed options, however.

Try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

Emmulator does not appear in midlet application

Hi There,
I am currently developing a UDP SOAP server for mobile devices that will host the webservices. I am in its initial phases and pretty new to J2ME too. I have created Midlet Application that listens to UDP requests. When I run the application the DefaultColorPhone emmulator lounches and starts listening on a certain port.
Some time later I just renamed my class from SoapServer to UDPSoapServer. Till that time whenever I run the application, no emmulator appears, no matter which one is it and the process keep on terminating. I am using CLDC 1.1 and MIDP 2.0. I think there is some IDE Configuration Issue as there is no errors in my application. I have cleaned it and build and compiled it again.
Can any one plz help me in this. I really need this urgently.
Regards,
Fahad Aijaz

Try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

UI Not appearing in GP Application

Similar Messages

Maybe you are looking for