UI Text field / value need to be display in red colour in web dynpro

Hi Friends,
i have a requirement in vendor master change,
left side: old value with disable mode and right side : change values. ( elem type : input filed)
like
vend name_lbl: sapoldverson sapnewecc6.0
when the values is changes in right, it should in red colour after enter.
please suggest me.
Thanks in advance
hari

Similar Messages

Text Field value display twice in Adobe Form.

Hi Experts,
I want to display a text field value twice in a ADOBE FORM but it only display at first occurance of the text field.
Please suggest me possible solution.
Regards,
Abdul

Why don't you have two different text fields in the interface and bind them separately at the two different places in the form. In the driver program you can control the value being passed to be same for both the fields.
Regards
Ranganath

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Want to hide the drop down based on text field value

Hi,
I want to hide some of the values in drop down based on one text field value.
I have the field called name which has the value A, B, C, D and also one drop down list which has the values 1,2,3,4,5,6. I want to hide the some of the values in drop down based on A or B or C. Let say, If it is A, drop down value should be 1,3,5. If it is B, Drop down value should be 1,2,3,4. Like this for every record.
Can you please help me out.
Thanks
Ram

Hi Robert,
I am trying it in two different way. Please suggest which is the right one and feasible.
1) I have the drop down list which has all the status. I am trying to hide the drop down values based on one text field value for all records.
2) I have collected all the drop down values into table in webdynpro method. Rightnow I have two tables.
one has line items details and another one have drop down values. both tables having common fields.
I have to show second table values for that particular key, move all of them to drop down.
Which is the best and feasible option.
Thanks
Ram

How can we hide the non key field values in the sm30 display

hello experts,
I have to protect the non key field values in the sm30 display , can u help me out wat changes i have to do in the layout.

Hello Gopal,
What do you mean by 'protecting' your non-key field value?
1) You want to display it, but make it non-changeable
A - Make the field as output-only in screen, as already answered by a preivous collegue
2) You do not want to display this field at all
A - Goto the DDIC definition of the view (not possible for a table directly), and maintain the required field as a Hidden. After activating, remember to re-generate the maintenance dialogue. Also, please maintain Event 21, in case you want to access/change the value of this field in background.
3) You want to maintain special validations/checks for the field
This can be easily done by introducing your modules within the CHAIN-FIELD commands in the PAI of the generated screens.
Best Regards,
Rekha

How to display smartform as PDF in web dynpro java

Hi,
Where can I find sample program to display smartform as PDF in web dynpro java.
Thanks.
Regards,
Henry

1. Create a smart form in the R/3 side
2. Now create a function module with the corresponding export parameter:
3. Make sure that the function module is marked remote enabled.
4. In NWDS create an Adaptive RFC model which points to the FM created in R/3 under the webdynpro application
5. Now create an application and view inside it to display the PDF and Insert a frame inside the view
6. Create a value node and an attribute say url of type string inside that node and bind it to the source
7. In the doInit() method place the following code
>    ZTest_Pdf_1_Input input = new ZTest_Pdf_Input();
>    wdContext.nodeZTest_Pdf_Input().bind(input);
>    try {
>            wdContext.currentZTest_Pdf_InputElement().modelObject().execute();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
> wdContext.currentInternalElement().setUrl(convert(wdContext.currentOutputElement().getBin_File()));
Inside that view create a method to convert the string to url so that it can be passed as a string to the setUrl method of the currentContextElement() , say convet(byte[] doc_content) which return a string.
Inside that methos write the following code,
>         String url = "";
>           WDWebResourceType webResType = WDWebResourceType.PDF;
>            IWDWebResource webResource = WDWebResource.getWebResource(doc_content, webResType);
>            try {
>                        url = webResource.getURL();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
>            return url;
Hope It will be helpful
Regards,
Sam Charles J.

Need info on Accessing portal services within a Web Dynpro application

Hi,
I need information on Accessing portal services within a Web Dynpro application.I want to explore this topic.Can anyone give useful links?
Thanks in advance.
Rajani N

Hi
how to reference a portal service with web dyn pro ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/how%20to/how%20to%20access%20a%20portal%20service%20within%20a%20web%20dynpro%20java%20application.pdf
http://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/clientserver/portal/WDPortalUtils.html
Best Regards
Jakub Krecicki

How to display an error Message in Web Dynpro

Hello,
I want to display an error message in Web Dynpro. I'm using this,
IWDMessageManager message = wdComponentAPI.getMessageManager();
message.reportSuccess("<some relevant debug message>");
However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
Thanks
Regards
SU

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

Repeat Text Field Value on Master page

This might be a really simple question. I have a form with two master pages. The second is applied to all but the first page. On the second master page I have a text field that I populate with user entered data from a text field. I want this value to show on all pages after the first page (page 2 to n). It shows up with the value on page 2, but all the rest have a blank value. Do I need to script something to make it repeat for all pages? Any help would be appreciated.

The simpliest method would be:
Under the Object tab, select Binding, and change the Default Binding to Global. The TextFields you create must have the same name, and Global binding will populate all the fields.

Dynamically bind website text field values to PDF document

Hi there,
I am in search of a step by step tutorial on how to generate a pdf document based on values from website text fields.
I have a form produced in Live Cycle Designer ES3 and a website in which we insert test results for our company to a MySql database.
My thoughts was that when we have inserted values on the website we could have a link to the pdf document and the same values would
somehow magically appear on the pdf. Have read somewhere that this can be done with XML and the use of different 3rd party programs.
Is this possible?
What approach would be the easiest? Perhaps someone knows about a tutorial on the matter?
Data is stored from PHP website to MySql database. Website produced in Dreamweaver CS5
Thanks in advance for any tips/help!
Regards,
Christian

It's possible with an XFA form as well as an AcroForm, but to do the work on a server additional software is needed as you mentioned. Adobe's offering is in their LiveCycle lineup and possibly . Others from third-parties include FDFMerge, PDFlib, iText, Debenu Quick PDF Library, and others. The idea is you merge the data with the PDF on the server and serve it up or save it on the server and provide a link on the HTML page that's returned. Documentation for these libraries will include samples, but you'll also have to learn how to do this securely if that's important for the system you're putting together.

Using a text field as well as a display as text field on a form

I have a text field that a user will enter in an employee id and from there it will populate a display as text field with their first and last name. I am trying to accomplish this using a javascript process but can not get the name to display. This does work if i change the display as text field to a select list. Can someone tell me what im doing wrong? Thanks
My code is below:
Application Process
DECLARE
v_desc VARCHAR2(255);
BEGIN
SELECT last_name||','||first_name
INTO v_desc
FROM org1
WHERE radionum = :P2_technician1_radio;
htp.prn(v_desc);
END;
HTML Form Attributes for p2technician1_radio_
onblur="set_Item();"
Javascript in HTML header
<script language="JavaScript" type="text/javascript">

</script>
Edited by: Dclipse03 on Dec 1, 2008 9:48 AM

Javascript:
<script language="JavaScript" type="text/javascript">

</script>
Setitem Process:_
DECLARE
v_technician1_name VARCHAR2 (200);
CURSOR cur_c
IS
SELECT last_name||','||first_name d,last_name||','||first_name r
FROM org1
WHERE radionum = v('p2_TEMP_APPLICATION_ITEM'));
BEGIN
FOR c IN cur_c
LOOP
v_technician1_name := c.technician1_name;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_technician1_name">' || v_technician1_name || '</item>');
HTP.prn ('</body>');
EXCEPTION
WHEN OTHERS
THEN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_technician1_name">' || SQLERRM || '</item>');
HTP.prn ('</body>');
END;

How to grap the disable text field values

Dear All,
i have a lov,
in this lov,i create 3 mappings for display those return values in text iput fieldss
i want to grab those text fields valuess
and assign those those values to another vo(table)
those grapping fields are not changed thats y i kept in disable mode
that time whenever any action is occure then disable field values are gone
that time i pass only null to vo.
but i want to grap the value when i kept those fields are in disalbe alsooo
how can i grap those valuess.

you have to create item of type form value & create lOV mapping so that the value will not get lost
Thanks
--Anil

Need to add superscript for text field--HELP NEEDED.

Hi Friends,
Is there any way to implement superscript and subscript text in Crystal? For example, I would like to superscript the portion (1) of the following string:
"Buy(1) or Sell(1)"
The only way I have found to do this is to put the "235" in a separate text field that uses a smaller font size, and overlay it into the gap that I intentionally left in the larger text field. For display and printing purposes, this works OK, but if a report containing these strings is exported to Excel, the text fields are exported as separate cells, which makes the exported report look funny.
I can create this string in Word, then cut and paste it into a text field in Crystal (which initially seems to work), but as soon as I click off the field, all the characters in it are converted to the same font size.
If this can't be done in the current version of Crystal, are there any plans for it to be implemented in future versions?

hello all,
the text interpretation for html or rtf in fields will not render superscript or subscript. the basic rule is that whatever you can format directly in a crystal reports text object, that's what you can have interpreted.
look up "text interpretation html" in kbase for a full list.
one option is to turn html passthrough on the server in question if this is a huge deal for you...if you want instructions on how to turn html passthrough on, they are located in the webelements user guide at
http://diamond.businessobjects.com/node/255
after doing so, you'd drop the database field into a formula and any html in the database field would be interpreted.

File name from text field value

Is it possible to save a file with the value of a Text field?
Thank you

Well JSP is server side code and TextBoxes are html which is client side script. To get the value of an html Textbox you either can use Javascript and do it all client side or you can post your form to a JSP or servlet and use request.getParameter("field_name"); to get the value of the form field.
make sense?
-S-

How to get readonly text field value in backing bean?

Below is my code in JSF.
<h:inputText id="prodLine" value="#{fbackingBean.value}" required="true" styleClass="readOnlyField" readonly="true"/>
This is a readonly field, and the value will been pass in by a pop up window. after the value had been passed in, i try to store the data which i had selected, but the value in readonly field (which show in above) return a null value.
May i noe how can i get the readonly field value in backing bean? thanks!

Why not keep track of the value in the backing bean? If it's a read only value set from a backing bean it should be simple to retrieve from a backing bean.
I'm new to JSF, but one thing that I have figured out is to try to put everything in the backing beans possible and to do as little as possible within the JFS web page components.

UI Text field / value need to be display in red colour in web dynpro

Similar Messages

Maybe you are looking for