UI Theme Designer Version
Hi Experts,
How can I get the version of UI Theme designer.
Thanks in advance.
Akhil
Hi Akhil
call transaction /n/ui5/theme_tool
and press on SUPPORT
There you get the theme Designer version.
Hope that helps.
Kind regards,
Carola
Similar Messages
-
Content of textfields is gone, when using LiveCycle Designer Version 8.2
Hi there,
I´m having a Problem with LiveCycle Designer in Version 8.2 (exactly 8.2.1.4029.1.523496). When It try to open a PDF-document containing an AcroForms-Form with some textfields, I can see all the textfields of the document, but their content (the text) is missing, I only see the empty fields.
When I use LiveCycle Designer Version 8.1 (exactly 8.1.1.3021.1.438934) everthing works fine. The xml-sources produced by the two differnt LiveCycle-versions look different, too.
Is there any known bug or something, which could explain this behaviuor?
Thanx a lot
ChrisHi Paul,
in the attachment you´ll find the pdf-Document and two xdp-files which I
generated with LiveCycle 8.1 and 8.2. They look pretty different, e.g. in
8.2 all of the
Kopie
Thema
Content of textfields is gone, when using
LiveCycle Designer Version 8.2
Not that I am aware of ....I assume you mean that when you open the form
in Acrobat the data is gone ...can you send the form and data to
mailto:[email protected] and I will have a look when I get a chance.
Paul -
Unable to send photo through email using iphoto theme (designs)
Unable to send photo through email using iPhoto theme (designs) using the SHARE button.
Error message:
Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.
Are you using Yosemite and not apple's Mail app? Then you may need to set up an app-specific password: See the post below:
Re: I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!in response to Gary Kissler
This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope) -
Two logos in Custom theme using theme designer
Hi Experts,
I have issue with Custom Theme, when we create a custom theme using Theme Designer as we are getting Two logos and "Can't read property r of null" error in console as attached.
Any solution provided for this will be appreciated.
Thanks in Advance.
Regards,
Bhaskar.Hi Masayuki,
As per this link only we have updated the latest UI5 version to 1.22.5.
Still facing the same issue, Please advice me to clear the issue.
Thanks in advance,
Bhaskar -
Designer Version for O9i ver. 9.2.0.1.0 ?
Hi,
Where can i get Oracle Designer version that goes with Oracle 9.2.0.1.0 for Win2K ?
I have downloaded the ones currently available -
A99230-01.zip
A99231-01.zip
But these are for 9.0.2.0.1 and while installing this on top of 9.2.0.1.0, it gives error "Oracle9iAS cannot be installed into an existing Oracle9i 9.2.0.1.0 or higher Oracle Home"
There seems to be a version mis-match. Where can i get the latest one for my 9.2.0.1.0 ?
Thnx.Hi Suneet,
There is actually no 9i Designer version 9.2.0.1.0.
From the information you provided, it seems you are
trying to install the full 9iDS pack (9.0.2.0.1) on
the top of a 9.2.0.1.0 database, which I would not
advise. Install the products in this way:
1) 9i database 9.2.0.1.0 into one home
2) 9iDS 9.0.2.0.1 pack into a separate home
3) 9i Designer 9.0.2.5.0 into the iDS home
9i Designer 9.0.2.5.0 is available from our Designer
pages here on OTN.
Hope this helps.
Regards,
Dominic
Designer Product Management
Oracle Corp -
Fiori Theme Designer: Target Content not saved
Hello,
I have created a theme based on the blue crystal theme. At first I entered the link to the application (URL to launchpad) and add the name of the application (eg "Launchpad").
Now I press the "Add" button and a new entry is created as shown in the following screenshot:
Next I do some customization and save + build my changes. If I now access my launchpad, the changes were applied.
When I close the browser with the theme designer or just go back to the theme overview and load again my custom theme, the previously added target application ("Launchpad") is not more there (if I again add the link to my launchpad and give a name I can see, that all adaptions are loaded correctly in the preview mode, so in genereal, the changes are stored correctly, but my application target "Launchpad" not.)
Is there a way to restore the prev. set target?
Thanks and best regards,
PatrickHi Patrick,
It has been a few months since I worked with Theme Designer, but the application targets never were saved, nor do I think they are meant to be saved. Since I suspect themes to be only infrequently modified for a specific application, I don't see much of a rationale for saving those links.
Regards, Mike
SAP Customer Experience Group - CEG -
Theme Designer - source image location
Hi,
I'm working on a NW740 upgrade project, and have run into what is probably a theme designer 101 problem with creating a user theme based on the sap_goldreflection theme for ABAP WD. Previously when I've worked on portal theming I have been able to use the SAP standard images by accessing the theme download zip file, in NW740 theme designer the images used must be on the NW740 server, but how do I access them?
Another issue I have is identifying the relevant CSS parameter ID for changing in the expert tab. I have completed about 80% of the changes that are required, but have some changes to make where the parameter isn't obvious. Is there any freeware available to give the CSS Parameter for an element under the pointer? (it would be nice if this was in-built in the theme designer, or am I missing something obvious)
ThanksHi Samuli,
Thanks for your reply, not sure if I'm missing something that's really simple. Importing a new image into the theme designer is easy. But if I want to change the colour of say the radio buttons, because the standard colours go against corporate branding, in the past I would have gone to the image in the Portal theme export .zip files, change the colours and then import this updated image. I want to keep the same shape and size of image as the remaining unchanged radio buttons, I'm from an ABAP/functional/portal admin background rather than a graphics background, so looking to not have to design the images from scratch. -
Error open Fiori UI Theme Designer on https
Dear all,
We're able to execute Fiori transaction apps on http and https.
Fiori launchpad also work on http and https.
Fiori UI Theme Designer also work perfectly on http ...
But if we open on https, we found 500 Internal Server Error after input user ID and Password ...
https://xxxxxxxxxx/sap/bc/theming/theme-designer?sap-client=080&sap-language=EN
I tried to search on forum and found some of help i.e :
Error in opening Fiori UI5 Theme designer
SAP Fiori LL07 - Common mistake for launchpage setting
Masa mention that Theme Designer and Apps should be on same protocol.
But how to switch from http to https?
We've done all step in Prerequisites - User Interface Add-On for SAP NetWeaver - SAP Library
Below component in SAP NW Gateway :
SAP_BASIS 740 0005 SAPKB74005
SAP_ABA 740 0005 SAPKA74005
SAP_GWFND 740 0007 SAPK-74007INSAPGWFND
SAP_UI 740 0008 SAPK-74008INSAPUI
PI_BASIS 740 0005 SAPK-74005INPIBASIS
ST-PI 2008_1_710 0007 SAPKITLRE7
SAP_BW 740 0005 SAPKW74005
IW_PGW 100 0005 SAPK-10005INIWPGW
UIX01CA1 100 0002 SAPK-10002INUIX01CA1
UIX01EAP 100 0002 SAPK-10002INUIX01EAP
UIX01HCM 100 0002 SAPK-10002INUIX01HCM
UIX01TRV 100 0002 SAPK-10002INUIX01TRV
thx in advance.
Tags edited by: Michael ApplebyHi Samuli Kaski,
All problem resolved now.
I just turn off http service via tcode SMICM (just leave only https service) and restart application.
Now I can create custom theme via UI Theme Designer using https protocol.
Thx for your attention before.
Regards,
Daniel K -
How to get "Themes" (Designs) for arranging my photos to email them in my iPhoto?
Thank youHello bendercm, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I would like an immediate reaccredit of my account after buying an app that do not work, iWeb Theme Designs, v1.0, Éditeur : Vitalijus Vysniauskas (4 ).. this app is not compatible with iweb french
You will not receive direct help with this problem by posting here. Everyone here is just a fellow user, so all you'll get here is advice on how to proceed.
You can contact Mac App Store Customer Service and ask for a refund, but there is no guarantee you'll get one. Before you ask for a refund, I'd suggest contacting the developer and asking for assistance:
http://www.iwebthemespark.com/Support.html
If they tell you there's no solution, that will give you a better case to present to the App Store for justifying a refund.
Regards. -
Since I upgraded to Elements 13, I have lost all my filters from 3rd party. How can I install them in version 13 that still are installed in version 11 and 12?
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks -
How to check Adobe Live Cycle Designer version in ABAP Workbench ?
Hi,
Please advise how to check Adobe Live Cycle Designer version in ABAP Workbench ? Currently i am using NW 7.0 SP18 (ABA,BASIS).
Thank You and Best Regards
Fernand LesmanaThere are 3 ways you can check which version of ALD you have installed on your machine.
1. Go to transaction SFP (Forms Builder) transaction and enter a form name. Select Layout and it should open Adobe LiveCycle Designer. From ALD select Help --> About section and it should give you version details.
2. Go to SE80 and open an Interactive form application. Select the InteractiveFormUI element and click edit. This will open the ALD. From ALD select Help --> About section and it should give you version details.
3. A more simpler way is just go to C:\Program Files\Adobe on your machine and there should be Designer folder there for e.g. Designer 7.1 / Designer 8.0 / Designer 8.1
Chintan -
Ou trouver, sur le site d'Adobe, la mise à jour de ma version CS5 Design (version éducation) ver CS6
I am sorry Almimufré can you please restate your inquiry?
-
UI5 addons are newly installed in our ERP 6 EHP6 system. But /UI5/THEME_DESIGNER in logon throws " This Function is not possible" .
Checking in SICF / default_host / bc / theming by activating the service and testing in the browser throws a " 403 Forbidden "
attached is screenshot of UI addons installed . Any suggestions are appreciated.In my previous reply, I said that no config is required to launch theme designer. I have not said anything about fiori etc.
I guess your question is about theme designer not working right. and the answer is you need to open the transaction as /n/UI5/THEME_DESIGNER
Regards,
Chandra -
Hi all,
I have a problem for which I need to upgrade from version 8.0 to 8.2.
1. Does anyone know if there is a release that works with SAP? (I need to use it in Tcode SFP) Is this supported allready?
2. And where can I find which ADS works with which designer version.
Kind regardsI have upgraded the Adobe Acrobat Profession v8.0 to v8.1, but the Designer is still version 8.0 and the problem still exists.
Maybe you are looking for
-
Dear OTN Members, I am working for a government organization, where they have multiple applications which are commonly using ORACLE as the database, and each and every application has different front end tool. The problem we face is : In Operations A
-
I bought a new Apple I bought a Mac Pro Retina screen, since I got it keeps crashing ALL the time!!! This is my first Mac computer and I am hating it!!! I assume I can take down to the any store and they will replace it??
-
10g Grid missing 9i Capacity Planner
Since 10g Grid is missing the capacity planner that 9i had, has anyone created any reports that mimic the behavior of the old capacity planner. We are most interested in CPU, Memory and Disk I/O charts over a time period. The reports generated from t
-
I have RAC 11gR1 (11.1.6.0.1) and I want to upgrade the database only (to 11gR2). I have that upgrade the ASM to (11gR2) obligatorily???? How i do it? thanks so muchhhhh
-
What is happening to the pictures sent with text messages?
What is happening to the pictures sent with text messages?